Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “halos”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,639 records · Page 91

Linear Covariance Techniques to Analyze a Multi-Vehicle, Multi-GN&C System with Applications to Rendezvous in a Near Rectilinear Halo Orbit

Typically for a rendezvous and docking scenario, only a single vehicle is considered the active vehicle. As a result, the target vehicle’s GN&C system is typically not a factor in the integrated performance analysis as it assumes a passive role. However, for upcoming NASA Artemis missions the active vehicle is both the chaser and target spacecraft. In addition, both vehicles are cooperating with one another, sharing telemetry data, and relying on data extracted from the GN&C system of the other. The process also includes a team of ground support personnel in mission control are tracking and monitoring each spacecraft uplinking state estimates and targeting solutions to support mission operations and enhance the onboard flight system performance. Being able to quickly analyze the impact of both vehicles with two different GN&C systems that also interact with the ground that does its own navigation and targeting uploads is critical. This paper outlines how to perform this rapid analysis using linear covariance techniques and applies them to a rendezvous scenario initiated in low lunar orbit and completed in a Near Rectilinear Halo Orbit (NRHO) representative of the NASA Artemis III mission.

Linear Covariance Analysis↗

HaloSat – A CubeSat that Studied the Hot Galactic Halo

HaloSat was the first CubeSat competitively funded by NASA's Astrophysics Division. HaloSat surveyed the sky in the soft (0.4-2 keV) band with the goal of studying diffuse X-ray emission from highly ionized oxygen in the circumgalactic medium (CGM) of the Milky Way (MW). The HaloSat science instrument (shown above ) contained three nominally identical X-ray detectors. The field of view had full response over a 10° diameter, tapering to zero response at 14° diameter. The detectors were sensitive in the 0.4-7 keV band. Typical halo spectra are shown below. The figure of merit for observing diffuse emission, survey grasp, is the product of effective area and solid angle of the field of view, AΩ. HaloSat has a small effective area, but a large field of view, giving it a grasp competitive with major missions. HaloSat’s grasp (17.6 cm 2 deg 2 at 600 eV) was larger than Chandra’s at launch (8.7 cm 2 deg 2 ). HaloSat data are archived at the HEASARC by a collaboration between NASA/MSFC, UI, and GSFC. See poster 104.01 by Jesse Bluem for details. HaloSat was built and operated by the University of Iowa (UI), NASA/GSFC, Johns Hopkins University, the Laboratoire Atmosphères, Observations Spatiales (LATMOS), and Blue Canyon Technologies.

HaloSat↗

Baseline Orbit Generation for Near Rectilinear Halo Orbits

A Near Rectilinear Halo Orbit (NRHO) with an eclipse-favorable phase serves as the current baseline orbit for the Gateway mission. The baseline provides a catalog of orbit maintenance targets and serves as a reference path for other types of trajectory analysis. In this investigation, an automated multiple-shooting differential corrections strategy is developed to generate many-revolution, long-duration, ballistic baseline orbits in a higher-fidelity ephemeris force model at the eclipse-avoidant phases and at other alternative phases. Additional geometric considerations for eclipse avoidance in the NRHO are presented and utilized within a long-lead orbit maintenance-based phase shift strategy.

Emily M. Zimovan-Spreen↗

Jettison and Disposal From Near Rectilinear Halo Orbits, Part 2: Applications

Objects deployed from a Near Rectilinear Halo Orbit (NRHO) experience simultaneous gravitational forces from the Moon, the Earth, and the Sun, and post-deployment behavior is complex. The current investigation applies the theories explored in Part 1 of the study to examine the dynamics of objects deployed from the Gateway NRHO to heliocentric space. Examples include jettison of cubesats and logistics modules as well as end-of-life options for the Gateway itself. Recontact risk with the Gateway as each object departs the lunar vicinity is explored, and both the immediate destination and the long-term fate of the deployed objects are assessed.

Diane C. Davis↗

Jettison and Disposal from Near Rectilinear Halo Orbits, Part 1: Theory

The proposed Gateway spacecraft in a Near Rectilinear Halo Orbit (NRHO) will be a human outpost in cislunar space. The baseline mission may experience the deployment of visiting vehicles, cubesats, and on-orbit debris. Departure from the NRHO and cislunar space is nontrivial due to the complex gravitational environment that persists in and around Gateway. Long-term disposal orbits in heliocentric space offer safe destinations for deployed objects. To mitigate risks associated with conjunctions between Gateway and deployed objects, strategies to identify risk-avoidant paths to heliocentric space are necessary for Gateway mission operations.

Stephen T. Scheuerle↗

Perturbation Modeling and Navigation Tuning for a Crewed Station in Near Rectilinear Halo Orbit

NASA's Gateway program will build a crew-tended station in an Earth-Moon Near Rectilinear Halo Orbit (NRHO) to support deep space missions to the lunar surface and heliocentric space. The station in the NRHO will be visited by crewed vehicles including lunar landers that are high mass relative to Gateway. Docking events with large vehicles induce significant thruster plume and docking contact velocity perturbations. Crewed vehicles induce significant venting perturbations that can stress the navigation filter's ability to remain converged about an estimated state. The torques that arise from venting and lunar gravity gradient require reaction control system (RCS) thruster intervention, which themselves induce a velocity perturbation. The best method to model RCS thruster perturbations is currently in development. This paper simulates different RCS perturbation models, schedules, and an increasing magnitude to investigate the navigation sensitivity to different RCS perturbation models. From the RCS perturbation models simulated, a worst-case scenario is chosen for further scrutiny. The navigation filter is further tuned to handle the most disruptive perturbation modeling and the resulting performance is analyzed.

Navigation↗

An Orbit Determination Comparison Study and Demonstration for Rendezvous and Docking in a Near Rectilinear Halo Orbit from the Lunar Surface

For the upcoming NASA Artemis III mission and those that follow, both the Human Landing System (HLS) and Orion programs are invested in understanding the impacts of ground tracking performance in supporting rendezvous and docking in a Near Rectilinear Halo Orbit (NRHO). Several critical questions must be answered to ensure mission success and crew safety and an assortment of analysis tools are being incorporated to address them. Two of these tools, LINCOV and MONTE, are currently providing program decision making results through HLS Insight, HLS NASA-collaborations, and Orion/Gateway cross-program analysis. To ensure consistency in the orbit determination performance, a comparison trade-study is performed using a low-lunar orbit to NRHO rendezvous scenario anticipated for the upcoming Artemis missions. An overview of the two analysis tools is provided along with a detailed step-by-step evaluation of the core capabilities and models related to the orbit determination process. This incremental comparison effort reveals both tools produce consistent solutions for the criteria investigated. Given the confidence in the orbit determination process and solutions generated, these results are then applied to demonstrate an integrated, closed-loop system performance where the HLS lander ascends from the lunar surface and successfully inserts into the NRHO relative to the Orion spacecraft in preparation for the final rendezvous and docking phase.

Linear Covariance Analysis↗

Assessment of Base Loads Generated by an Exercise Device in the HALO Module

The purpose of this document is to prescribe a uniform procedure that can be used to postprocess base loads generated by a crew member and an exercise device in the Gateway Habitation and Logistics Outpost (HALO) module. This memo has three primary sections. First, the exercise loads pass through a Vibration Isolation and Stabilization (VIS) system notionally depicted in Figure 1 for the purpose of preliminary analyses. This is described in Section 2. Next, these loads are processed in frequency domain as explained in Section 3. Finally, the resulting outputs are compared with a Gateway Program Loads and Dynamics (L&D) allocation given to the VIS system. This information is provided in Section 4.

Exercise↗

Autonomous Burn Targeting for a Lunar Sortie Staged From a Near-Rectilinear Halo Orbit

NASA is planning manned lunar landings starting in the mid 2020s as part of its Artemis program. These lunar sortie missions will be staged from a Near-Rectilinear Halo Orbit (NRHO), with a requirement for the lander to autonomously determine the timing and targets for multiple burns so that it can navigate its way back to the staging vehicle in the NRHO. The lander mission profile transitions through multiple gravitational regimes, at times influenced equally by 3rd bodies (Earth and Sun) as much as by the Moon, while at other times the lander is primarily influenced by lunar gravitation. These different gravitational regimes pose challenges to guidance and targeting logic. The present work describes options for autonomous logic for each of several major maneuvers of the lunar sortie, including numerical techniques to incorporate the effect of 3rd bodies. Throughout the development there is an emphasis on simplicity and computational efficiency.

NRHO↗

Proposed electron halo detector system as one of the beam overlap diagnostic tools for the new RHIC electron lens

An electron lens for head-on beam-beam compensation planned for RHIC requires precise overlap of the electron and proton beams which both can have down to 0.3 mm rms transverse radial widths along the 2m long interaction region. Here we describe a new diagnostic tool that is being considered to aid in the tuning and verification of this overlap. Some of ultra relativistic protons (100 or 250 GeV) colliding with low energy electrons (2 to 10 keV) will transfer sufficient transverse momentum to cause the electrons to spiral around the magnetic guiding field in a way that will make them detectable outside of the main solenoid. Time-of-flight of the halo electron signals will provide position-sensitive information along the overlap region. Scattering cross sections are calculated and counting rate estimates are presented as function of electron energy and detector position.

43 PARTICLE ACCELERATORS↗

Halo Formation And Emittance Growth of Positron Beams in Plasmas

An ultrarelativistic 28.5 GeV, 700-{micro}m-long positron bunch is focused near the entrance of a 1.4-m-long plasma with a density n{sub e} between {approx}10{sup 13} and {approx}5 x 10{sup 14} cm{sup -3}. Partial neutralization of the bunch space charge by the mobile plasma electrons results in a reduction in transverse size by a factor of {approx}3 in the high emittance plane of the beam {approx}1 m downstream from the plasma exit. As n{sub e} increases, the formation of a beam halo containing {approx}40% of the total charge is observed, indicating that the plasma focusing force is nonlinear. Numerical simulations confirm these observations. The bunch with an incoming transverse size ratio of {approx}3 and emittance ratio of {approx}5 suffers emittance growth and exits the plasma with approximately equal sizes and emittances.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Core-Halo Collective Instabilities

At strong space charge, transverse modes of the bunch core may effectively couple with those of the halo, leading to instabilities well below the core-only transverse mode-coupling threshold.

43 PARTICLE ACCELERATORS↗

Halo-containing anion exchange membranes and methods thereof

The present invention relates to functionalized polymers including a poly(phenylene) structure having modifications suitable for an anion exchange membrane. Exemplary modifications include use of a cationic moiety and a halo moiety. Methods and uses of such structures and polymers are also described herein.

36 MATERIALS SCIENCE↗

Faint galaxies and small halos : probes of galaxy formation and dark matter

This thesis addresses the intersection of dark matter and galaxy formation physics by modeling the faintest galaxies in the Universe in a cosmological context. In the first part of this work, I present an empirical model for the connection between faint galaxies and small dark matter halos. Combining this model with tailored cosmological simulations of Milky Way analogs and state-of-the-art satellite galaxy observations yields new insights into dwarf galaxy formation and hierarchical structure formation. Next, I show that these same dwarf galaxy observations place stringent constraints on microphysical dark matter properties including its warmth, self-interactions, Standard Model interactions, minimum particle mass, and formation epoch. Finally, I describe a unified framework that combines dark matter constraints from dwarf galaxies and strong gravitational lensing, paving the way for next-generation surveys of small-scale cosmic structure to deliver unprecedented insights into dark matter physics.

Nadler, Ethan Oliver↗

Channeling and Volume Reflection Based Crystal Collimation of Tevatron Circulating Beam Halo (T-980)

The T980 crystal collimation experiment is underway at the Tevatron to determine if this technique could increase 980 GeV beam-halo collimation efficiency at high-energy hadron colliders such as the Tevatron and the LHC. T980 also studies various crystal types and parameters. The setup has been substantially enhanced during the Summer 2009 shutdown by installing a new O-shaped crystal in the horizontal goniometer, as well as adding a vertical goniometer with two alternating crystals (O-shaped and multi-strip) and additional beam diagnostics. First measurements with the new system are quite encouraging, with channeled and volume-reflected beams observed on the secondary collimators as predicted. Investigation of crystal collimation efficiencies with crystals in volume reflection and channeling modes are described in comparison with an amorphous primary collimator. Results on the system performance are presented for the end-of-store studies and for entire collider stores. The first investigation of colliding beam collimation simultaneously using crystals in both the vertical and horizontal plane has been made in the regime with horizontally channeled and vertically volume-reflected beams. Planning is underway for significant hardware improvements during the FY10 summer shutdown and for dedicated studies during the final year of Tevatron operation and also for a 'post-collider beam physics running' period.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Investigation of the role of 10 Li resonances in the halo structure of 11 Li through the 11 Li(p,d) 10 Li transfer reaction

Here, the first measurement of the one-neutron transfer reaction 11 Li(p,d) 10 Li performed using the IRIS facility at TRIUMF with a 5.7A MeV 11 Li beam interacting with a solid H 2 target is reported. The 10 Li residue was populated strongly as a resonance peak with energy E r = 0.62 ± 0.04 MeV having a total width Γ = 0.33 ± 0.07 MeV. The angular distribution of this resonance is characterized by neutron occupying the 1p 1/2 orbital. A DWBA analysis yields a spectroscopic factor of 0.67 ± 0.12 for p 1/2 removal strength from the ground state of 11 Li to the region of the peak.

10,11Li↗