Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “generalized functions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,639 records · Page 91

Measurement of driver/vehicle multiloop response properties with a single disturbance input

Multiloop response properties of controllers are, in general, very difficult to obtain because an independent forcing function is needed for each describing function to be measured, and interpolation procedures may be required to obtain intermediate describing functions at common frequencies. Two examples are provided for the measurement of driver/vehicle multiloop response properties using a single disturbance input. The validity of the procedure is based on current multiloop operator adjustment rules and is made plausible by comparison with experimental data.

Mcruer, D. T.↗

A mean spherical model for soft potentials: The hard core revealed as a perturbation

The mean spherical approximation for fluids is extended to treat the case of dense systems interacting via soft-potentials. The extension takes the form of a generalized statement concerning the behavior of the direct correlation function c(r) and radial distribution g(r). From a detailed analysis that views the hard core portion of a potential as a perturbation on the whole, a specific model is proposed which possesses analytic solutions for both Coulomb and Yukawa potentials, in addition to certain other remarkable properties. A variational principle for the model leads to a relatively simple method for obtaining numerical solutions.

Rosenfeld, Y.↗

The Mg II features near 2800A and spectral classification

Relatively high-resolution (about 0.4 A) observations of the Mg II resonance lines at 2795.523 and 2802.698 A as well as their respective subordinate lines at 2797.989 and 2790.768 A are discussed for main-sequence stars, giants, and supergiants. The general behavior of the Mg II lines as a function of spectral type is described. An expression is obtained for the relationship between absolute magnitude and Mg II emission widths. The variation of the absorption widths of the Mg II features with spectral type and luminosity class is briefly summarized.

Kondo, Y.↗

Feasibility study for a numerical aerodynamic simulation facility. Volume 2: Hardware specifications/descriptions

An FMP (Flow Model Processor) was designed for use in the Numerical Aerodynamic Simulation Facility (NASF). The NASF was developed to simulate fluid flow over three-dimensional bodies in wind tunnel environments and in free space. The facility is applicable to studying aerodynamic and aircraft body designs. The following general topics are discussed in this volume: (1) FMP functional computer specifications; (2) FMP instruction specification; (3) standard product system components; (4) loosely coupled network (LCN) specifications/description; and (5) three appendices: performance of trunk allocation contention elimination (trace) method, LCN channel protocol and proposed LCN unified second level protocol.

Green, F. M.↗

An out-of-plane CO survey of the first galactic quadrant

An out-of-plane survey of 2.6-mm CO emission from the first quadrant of the galactic disk carried out at Columbia University with a 1.2-meter telescope is reported. Longitude-velocity diagrams for the galactic plane and for latitude b + or - 0.5 deg are given. The half-thickness of the CO plane, its displacement, and the emissivity of CO, all as functions of galactic radius, are shown. New results are generally consistent with those reported before.

Cohen, R. S.↗

OH fluorescence in comets - Fluorescence efficiency of the ultraviolet bands

The present investigation is concerned with the calculation of the fluorescence efficiency of OH over a wide range of heliocentric radial velocities. Three vibrational states in each of the two lowest electronic states are included in these calculations, producing a total of nine vibrational bands in the ultraviolet. The attempt is made to reproduce observed, ultraviolet, cometary spectra of OH by utilizing the Swings fluorescence mechanism. The inclusion of four rotational states within each of the three vibrational states and a detailed solar atlas make it possible to match observations very well, although there remain some discrepancies. This ability to reproduce observations provides confidence that the more general results obtained for the fluorescence efficiency as a function of heliocentric radial velocity can be used in interpreting both previous and future observations of OH in comets.

Schleicher, D. G.↗

A fundamental comparison of canard and conventional configurations

This paper examines the relative efficiency of canard, tandem, and aft-tailed aircraft configurations through analysis of an elementary lifting system. Stability and trim requirements are imposed upon the system and its C sub L(max), drag, and structural weight are studied as its geometry varies over a wide range of possible configurations. During the course of the analysis, two general solutions emerge for minimum induced drag as a function of the geometry and the division of lift between the surfaces of such a system - one for fixed span and the other for fixed weight. The conclusion is that the pre-eminence of the conventional aft-tailed configuration has a sound fundamental basis, but that there may be some room for improvement.

Mcgeer, T.↗

A performability solution method for degradable nonrepairable systems

The present performability model-solving algorithm identifies performance with 'reward', representing the state behavior of a system S by a finite-state stochastic process and determining reward by means of reward rates that are associated with the states of the base model. A general method is obtained for determining the probability distribution function of the performance (reward) variable, and therefore the performability, of the corresponding system. This is done for bounded utilization periods, and the result is an integral expression which is either analytically or numerically solvable.

Furchtgott, D. G.↗

Asymmetric spline surfaces - Characteristics and applications

Asymmetric spline surfaces appear useful for the design of high-quality general optical systems (systems without symmetries). A spline influence function defined as the actual surface resulting from a simple perturbation in the spline definition array shows that a subarea is independent of others four or more points away. Optimization methods presented in this paper are used to vary a reflective spline surface near the focal plane of a decentered Schmidt-Cassegrain to reduce rms spot radii by a factor of 3 across the field.

Stacy, J. E.↗

Test and evaluation plan for the Centralized Storm Information System

The installation of the Centralized Storm Information System (CSIS) at the NOAA operational complex in Kansas City, Missouri is described. This complex includes the National Severe Storms Forecast center and a Satellite Field Service Station which is denoted in this research plan as NSSFC. CSIS computers will act in concert to merge analyze the many data sets needed to forecast severe convective storms. Specific aspects of CSIS are evaluated against the CSIS objectives. The functions to be evaluated characterize the attributes of a generalized interactive computer system. A major development in the CSIS program will allow communication between CSIS and the NSSFC Eclipse computer.

Source record↗

Experimental philosophy leading to a small scale digital data base of the conterminous United States for designing experiments with remotely sensed data

Research using satellite remotely sensed data, even within any single scientific discipline, often lacked a unifying principle or strategy with which to plan or integrate studies conducted over an area so large that exhaustive examination is infeasible, e.g., the U.S.A. However, such a series of studies would seem to be at the heart of what makes satellite remote sensing unique, that is the ability to select for study from among remotely sensed data sets distributed widely over the U.S., over time, where the resources do not exist to examine all of them. Using this philosophical underpinning and the concept of a unifying principle, an operational procedure for developing a sampling strategy and formal testable hypotheses was constructed. The procedure is applicable across disciplines, when the investigator restates the research question in symbolic form, i.e., quantifies it. The procedure is set within the statistical framework of general linear models. The dependent variable is any arbitrary function of remotely sensed data and the independent variables are values or levels of factors which represent regional climatic conditions and/or properties of the Earth's surface. These factors are operationally defined as maps from the U.S. National Atlas (U.S.G.S., 1970). Eighty-five maps from the National Atlas, representing climatic and surface attributes, were automated by point counting at an effective resolution of one observation every 17.6 km (11 miles) yielding 22,505 observations per map. The maps were registered to one another in a two step procedure producing a coarse, then fine scale registration. After registration, the maps were iteratively checked for errors using manual and automated procedures. The error free maps were annotated with identification and legend information and then stored as card images, one map to a file. A sampling design will be accomplished through a regionalization analysis of the National Atlas data base (presently being conducted). From this analysis a map of homogeneous regions of the U.S.A. will be created and samples (LANDSAT scenes) assigned by region.

Labovitz, M. L.↗

A remark about pointed bubbles

The polymer expansion is a formal algebraic identity between a partition function and logarithm in statistical physics problems. The expansion gives a systematic method to control the free energy or to establish exponential tree-graph decay of connected correlations. Here, the convergence properties of the polymer expansion are analyzed in connection with three practical examples, including: intersecting bonds in chemical polymer chains; a connected closed hypersurface built from the (d-1)-faces of the d-dimensional unit cubes; and the set of Feynamn diagrams in the perturbation series of the Euclidean field theory partition function Z. The example of connected polymer chains is generalized to apply to other lattice models, including n-state Ising models at high temperature; short range lattice gases at high temperature; and weak coupling lattice field and gauge theories.

Garabedian, P. R.↗

Transient engine performance with water ingestion

The immediate effects on the transient performance of a generic, high bypass ratio jet engine on account of water ingestion are discussed. The air compression subsystem has been analyzed with respect to four aerothermodynamic and mechanical processes associated with two-phase fluid flow and the engine simulation has been carried out under three limiting cases of interest in practice, one pertaining to draining of water at the end of compression and the other two, to partial evaporation at two different locations in the burner. General observations are made on engine operability as a function of engine and control design under various engine and (control input) sensor operating conditions, with various mass fractions of water in the air-water mixture entering the engine, during various pilot-initiated power demand changes.

Haykin, T.↗

A recursive solution for a fading memory filter derived from Kalman filter theory

A simple recursive solution for a class of fading memory tracking filters is presented. A fading memory filter provides estimates of filter states based on past measurements, similar to a traditional Kalman filter. Unlike a Kalman filter, an exponentially decaying weight is applied to older measurements, discounting their effect on present state estimates. It is shown that Kalman filters and fading memory filters are closely related solutions to a general least squares estimator problem. Closed form filter transfer functions are derived for a time invariant, steady state, fading memory filter. These can be applied in loop filter implementation of the Deep Space Network (DSN) Advanced Receiver carrier phase locked loop (PLL).

Statman, J. I.↗

Fronts propagating with curvature dependent speed: Algorithms based on Hamilton-Jacobi formulations

New numerical algorithms are devised (PSC algorithms) for following fronts propagating with curvature-dependent speed. The speed may be an arbitrary function of curvature, and the front can also be passively advected by an underlying flow. These algorithms approximate the equations of motion, which resemble Hamilton-Jacobi equations with parabolic right-hand-sides, by using techniques from the hyperbolic conservation laws. Non-oscillatory schemes of various orders of accuracy are used to solve the equations, providing methods that accurately capture the formation of sharp gradients and cusps in the moving fronts. The algorithms handle topological merging and breaking naturally, work in any number of space dimensions, and do not require that the moving surface be written as a function. The methods can be used also for more general Hamilton-Jacobi-type problems. The algorithms are demonstrated by computing the solution to a variety of surface motion problems.

Osher, Stanley↗

The effect of sulfur and zirconium Co-doping on the oxidation of NiCrAl

The adhesion behavior of Al2O3 scales formed on NiCrAl+Zr alloys was examined as a function of both sulfur and zirconium doping levels. In general, very high levels of zirconium were required to counteract the detrimental effects of sulfur. A sulfur-zirconium adherence map was constructed, as determined from the oxidation and spalling behavior in 1100 C cyclic tests. For low sulfur alloys, the amount of zirconium required for adherence at any given sulfur level can be described by Zr greater than 600 S sup 0.2 (in ppma). These results underscore the importance of sulfur to adhesion mechanisms and suggests that sulfur gettering is a first order effect of reactive element additions to MCrAl alloys.

Smialek, James L.↗

Optimal rejection of persistent disturbances, robust stability, and mixed sensitivity minimization

The problem of optimal disturbance rejection of bounded persistent disturbances is solved in the general nonsquare case. The minimum value of the objective function can be obtained by solving a semiinfinite linear programming problem, and an iterative procedure for obtaining approximate solutions is introduced. Application of the l1-optimal problem to robustness is discussed. A mixed sensitivity problem is formulated and shown to guarantee good disturbance rejection in the presence of plant perturbations.

Dahleh, Munther A.↗

A new way to interpret the DIRAC equation in a non-Riemannian manifold

The idea of internal mass terms introduced in ref. (1), is shown not to be an appropriate hypothesis when it is placed in connection with the components of the generalized (matrix) vierbeins being proportional to the Riemannian (gravitational) vierbeins. It would result in an undesirable canceling of the Electromagnetic and the Yang-Mills components in the generalized metric. Another hypothesis is introduced where the wave function psi is Taylor expanded in a small parameter p.

Marques-Bonham, Sirley↗