Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “electronics analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,639 records · Page 91

Physical characterization of uranium oxide pellets and powder applied in the Nuclear Forensics International Technical Working Group Collaborative Materials Exercise 4

Physical characterization is one of the most broad and important categories of techniques to apply in a nuclear forensic examination. Physical characterization techniques vary from simple weighing and dimensional measurements to complex sample preparation and scanning electron microscopy-electron backscatter diffraction analysis. This paper reports on the physical characterization conducted by several international laboratories participating in the fourth Collaborative Materials Exercise, organized by the Nuclear Forensics International Technical Working Group. Methods include a range of physical measurements, microscopy-based observations, and profilometry. In conclusion, the value of these results for addressing key investigative questions concerning two uranium dioxide pellets and a uranium dioxide powder is discussed.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Deltamethrin induced RIPK3-mediated caspase-independent non-apoptotic cell death in rat primary hepatocytes

Deltamethrin (DLM), a synthetic pyrethroid insecticide, is used all over the world for indoor and field pest management. In the present study, we investigated the elicited pathogenesis of DLM-induced hepatotoxicity in rat primary hepatocytes. DLM-induced cell death was accompanied with increased ROS generation, decreased mitochondrial membrane potential and G2/M arrest. Pre-treatment with N-acetyl cysteine/butylated hydroxyanisole/IM54 could partly rescue hepatocytes suggesting that ROS might play a role in DLM-induced toxicity. Interestingly, DLM treatment resulted in a caspase-independent but non-apoptotic cell death. Pre-treatment with pan-caspase inhibitor (ZVAD-FMK) could not rescue hepatocytes. Unaltered caspase-3 activity and absence of cleaved caspase-3 also corroborated our findings. Further, LDH release and Transmission electron microscopy (TEM) analysis demonstrated that DLM incites membrane disintegrity and necrotic damage. Immunochemical staining revealed an increased expression of inflammatory markers (TNFα, NFκB, iNOS, COX-2) following DLM treatment. Moreover, the enhanced RIPK3 expression in DLM treated groups and prominent rescue from cell death by GSK-872 indicated that DLM exposure could induce programmed necrosis in hepatocytes. The present study demonstrates that DLM could induce hepatotoxicity via non-apoptotic mode of cell death. - Highlights: • Deltamethrin (DLM) induces caspase-independent death in rat primary hepatocytes. • RIPK3 played a central role in DLM-mediated programmed necrosis in liver cells. • Reactive oxygen species played a role in DLM mediated hepatotoxity.

60 APPLIED LIFE SCIENCES↗

First-principles study of atomic and electronic structures of 60° perfect and 30°/90° partial glide dislocations in CdTe

The atomic and electronic structures of 60° glide perfect and 30°/90° glide partial dislocations in CdTe are studied using combined semi-empirical and density functional theory calculations. The calculations predict that the dislocation cores tend to undergo significant reconstructions along the dislocation lines from the singly-periodic (SP) structures, yielding either doubly-periodic (DP) ordering by forming a dimer or quadruply-periodic (QP) ordering by alternating a dimer and a missing dimer. Charge modulation along the dislocation line, accompanied by the QP reconstruction for the Cd-/Te-core 60° perfect and 30° partials or the DP reconstruction for the Cd-core 90° partial, results in semiconducting character, as opposed to the metallic character of the SP dislocation cores. Dislocation-induced defect states for the 60° Cd-/Te-core are located relatively close to the band edges, whereas the defect states lie in the middle of the band gap for the 30° Cd-/Te-core partial dislocations. In addition to the intracore charge modulation within each QP core, the possibility of intercore charge transfer between two different dislocation cores when they are paired together in the same system is discussed. As a result, the analysis of the electronic structures reveals the potential role of the dislocations on charge transport in CdTe, particularly in terms of charge trapping and recombination.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Accumulative fold-forging (AFF) as a novel severe plastic deformation process to fabricate a high strength ultra-fine grained layered aluminum alloy structure

Highlights: • A novel SPD process named as AFF was introduced. • AFF process is based on the repetitive forging of folded metal foils. • This new method possesses an exceptional capability for fabrication of UFG layered structures. • An AA8006 aluminum alloy layered material with the UFG structure of 200–300 nm was produced. • An enhanced hardness up to ~ 100% was attained owing to the UFG and layered structures. - Abstract: A novel severe plastic deformation (SPD) process termed accumulative fold forging (AFF) is introduced to fabricate a homogenous ultra-fine grained (UFG) layered metal structure by repetitive folding and forging aluminum alloy foil. The present work studies AFF applied to thin foils of AA8006 Al-Fe-Mn aluminum alloy after 26 folding steps to produce a UFG structure containing 67,108,864 layers across a 2 mm thickness. The structure of the layers and grain refinement are studied using X-ray diffraction (XRD), field-emission scanning electron microscopy (FE-SEM) and scanning-transmission electron microscopy (STEM) analysis. The results indicate a well-bonded inter-layer structure with an average grain size of about 200 nm parallel and 250 nm perpendicular to the forging direction, while dislocation density increased to ~ 7.2 × 10{sup 15} m{sup − 2} following AFF. The mechanical strength of the aluminum foil is evaluated in the terms of indentation hardness testing before and after AFF process. The processed UFGed layered material exhibited an average hardness value of ~ 61.5 Vickers as compared to the initial value of ~ 30.4 Vickers for the annealed foil alloy, which indicates an improvement of ~ 100% due to the contributions of grain refinement, work hardening and interfacial strengthening of the bonded layers.

36 MATERIALS SCIENCE↗

Synthesis, dielectric behavior and impedance measurement studies of Cr-substituted Zn-Mn ferrites

Graphical abstract: Variation of dielectric constant with frequency. Research highlights: {yields} Sol-gel route synthesized spherical crystalline nanoparticles of ZnMn{sub 1-x}Cr{sub x}FeO{sub 4}. {yields} XRD, DTA, FTIR, SEM, dielectric and impedance study. {yields} The ferrites show concentration dependence of ac electrical conductivity. {yields} Impedance response is dominated by grain boundary behavior. -- Abstract: Nanocrystalline ZnMn{sub 1-x}Cr{sub x}FeO{sub 4} (1.0 {>=} x {>=} 0) ferrites were synthesized by sol-gel technique. X-ray diffraction (XRD) confirmed the formation of single phasic cubic spinel lattice for all the compositions studied. Lattice parameter shows a decreasing trend with an increase in Cr content in the compositions. Formation of spherical nanoparticles was revealed by scanning electron microscopy (SEM) analysis. Infrared spectroscopic studies revealed two main absorption bands in the range 400-800 cm{sup -1} arising due to tetrahedral (A) and octahedral (B) site vibrations. Dielectric constant, dielectric loss tangent, ac conductivity and complex impedance were measured as a function of frequency in the range 20 Hz to 1 MHz. Frequency dependence of dielectric constant shows dielectric dispersion due to the Maxwell-Wagner type of interfacial polarization. The role of chromium in modifying structural and dielectric properties of these ferrites has been explained.

36 MATERIALS SCIENCE↗

Effects of ZrO{sub 2} doping on HfO{sub 2} resistive switching memory characteristics

A resistive switching (RS) random access memory device with ZrO{sub 2}-doped HfO{sub 2} exhibits better RS performance than that with pure HfO{sub 2}. In particular, I{sub res}, V{sub res}, and V{sub set} are reduced by approximately 58%, 38%, and 39%, respectively, when HfO{sub 2} is doped with ZrO{sub 2} (9 at. %). In addition, the ZrO{sub 2} doping in HfO{sub 2} makes the distribution of most parameters steeper. Transmission electron microscopy (TEM) analysis reveals that the deposited zirconium-doped hafnium oxide (HZO) (9 at. %) is polycrystalline. Elemental mapping results by scanning TEM–energy dispersive spectroscopy also prove that ZrO{sub 2} is uniformly distributed in the HZO (9 at. %) film. The possible mechanism for the improvement in the RS characteristics is also suggested on the basis of the X-ray photoelectron spectroscopy results and filamentary RS mechanism. These results suggest that the ZrO{sub 2} doping into HfO{sub 2} likely not only will reduce power consumption but also will improve cyclic endurance by controlling the nonstoichiometric phase.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Hydrothermal synthesis of magnetite crystals: From sheet to pseudo-octahedron

In this paper, we developed a hydrothermal method to fabricate sheet-like and pseudo-octahedral magnetite crystals. X-ray diffraction (XRD) confirmed the products were pure spinel-structured magnetite. Scanning electron microscopy (SEM) was used to investigate the morphology of the obtained crystals. By carefully regulating the initial NaOH concentrations, the morphology of the products could be changed from sheet-like crystals to pseudo-octahedral crystals. Transmission electron microscopy (TEM) analysis indicated the sheet-like crystals were the oriented aggregation of nanoparticles. Pseudo-octahedral magnetite crystals were single crystalline, and were obtained by dissolution-recrystallization of the sheet-like crystals. Vibrating sample magnetometer (VSM)) suggested the magnetic properties of the products were strongly related to the morphology. The coercivity of the sheet-like magnetite crystals was 100 Oe, larger than 30 Oe of the pseudo-octahedral crystals, but the saturation magnetization of the sheet-like magnetite crystals was 40 emu/g, smaller than 85 emu/g of the pseudo-octahedral crystals.

36 MATERIALS SCIENCE↗

The role of surface diffusion and wing tilt in the formation of localized stacking faults in high In-content InGaN MQW nanostructures

Yellow and green emitting multiple quantum well structures are grown on nanostripe templates with {10-11} facets. SEM and cathodoluminescence measurements show a correlation between rough surface morphology near the bottom of the stripes and non-radiative recombination centers. Transmission electron microscopy (TEM) analysis shows that these surface instabilities are a result of stacking faults generated from the quantum well (QW) regions near the bottom of the pyramid that propagate to the surface. HRTEM images show that the stacking faults are I{sub 1} type which is formed by removal of one half basal plane to relieve the compressive strain in the InGaN QW. Thicker QWs near the bottom as a result of growth rate enhancement due to the surface diffusion of the precursors from the mask regions cause increased strain. Additionally, the compressive strain induced by the bending of the nanostructure towards the growth mask further increases the strain experienced by the QW thereby causing the localized defect generation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Crystallization control of SrCO{sub 3} nanostructure in imidazolium-based temperature ionic liquids

Highlights: ► Nanowhisker, nanospindle, nanosphere, sphere, spindle, rodlike SrCO{sub 3} were obtained. ► Nanowhisker, nanospindle SrCO{sub 3} were auto-assembled in [C{sub 8}mim]BF{sub 4} and [HOEtMIm]NT{sub f2}. ► Small size and rough surface particle show low starting decomposition temperature. ► This method is simple, easy to control in large-scale producing SrCO{sub 3} nanostructure. -- Abstract: Strontium carbonate nanostructures, with unique nanowhisker, nanospindle, nanosphere, sphere, spindle, and rodlike hierarchical structure, were synthesized in imidazolium-based room temperature ionic liquids [C{sub 4}mim]PF{sub 6}, [C{sub 4}mim]Cl, [C{sub 8}mim]Br, [C{sub 8}mim]BF{sub 4}, and [HOEtMIm]NT{sub f2}. The nanostructures were characterized by X-ray diffraction, field emission scanning electron microscopy, transmission electron microscopy, and thermogravimetric analysis. The results show that the morphologies of SrCO{sub 3} were strongly dependent on the nature of the corresponding RILs, its content, and the reaction temperature. RILs can act as structure-directing agent, leading the auto-assembly of SrCO{sub 3} crystal. [C{sub 8}mim]BF{sub 4} and [HOEtMIm]NT{sub f2} favored the production of nanowhisker and nanospindle SrCO{sub 3}, respectively, whereas [C{sub 4}mim]PF{sub 6} favored the production of nanosphere. Small particles were obtained at high reaction temperature. Low starting decomposition temperature was observed. Finally, the formation mechanism of the SrCO{sub 3} crystal was preliminary presented.

36 MATERIALS SCIENCE↗

Large-scale synthesis of hierarchical-structured weissite (Cu{sub 2−x}Te) flake arrays and their catalytic properties

Graphical abstract: - Highlights: • Large-scale Cu{sub 2−x}Te flake arrays grown on copper foam were synthesized. • They possess superior catalytic efficiency on methylene blue with the assistance of H{sub 2}O{sub 2}. • The effects of preparing conditions on the growth of Cu{sub 2−x}Te flake arrays were investigated. - Abstract: Large-scale weissite (Cu{sub 2−x}Te) flake arrays with three-dimensional (3D) hierarchical structure have been successfully fabricated via a facile one-step solution-phase strategy through the reaction of tellurium powder and copper foam. At the end of the reaction Cu{sub 2−x}Te flakes were distributed evenly on the surface of a porous solid copper substrate. Field-emission scanning electron microscopy (FESEM) and transmission electron microscopy (TEM) analysis showed the abundance of flakes grown on the 3D porous copper architecture, while X-ray diffraction (XRD) and energy-dispersive X-ray spectra (EDS) were used to determine the crystal structure and phase composition of these products. A series of experiments discovered that the size and morphology of the products could be affected by some reactive parameters including the reaction time, synthesis temperature and volume ratio of absolute ethanol/deionized water. Catalysis experiments using the in situ synthesized of Cu{sub 2−x}Te flakes to catalyze the degradation of methylene blue (MB) demonstrated the strong catalytic ability of these flakes.

36 MATERIALS SCIENCE↗

Microstructure and micro-texture evolution during large strain deformation of Inconel alloy IN718

The hot deformation behaviour of Inconel alloy IN718 was studied in the temperature range of 950–1100 °C and at strain rates of 0.01 and 1 s{sup −1} with a view to understand the microstructural evolution as a function of strain rate and temperature. For this purpose, a single hit, hot isothermal plane strain compression (PSC) technique was used. The flow curves obtained during PSC exhibited weak flow softening at higher temperatures. Electron backscattered diffraction analysis (EBSD) of the PSC tested samples at the location of maximum strain revealed dynamic recrystallisation occurring at higher temperatures. Based on detailed microstructure and microtexture analyses, it was concluded that single step, large strain deformation has a distinct advantage in the thermo-mechanical processing of Inconel alloy IN718. - Highlights: • Plane strain compression (PSC) on IN718 was conducted. • Evolution of microstructure during large strain deformation was studied. • Flow curves exhibited weak softening at higher temperatures and dipping of the flow curve at a strain rate of 1 s{sup −1}. • Optimization of microstructure and process parameter for hot rolling possible by plane strain compression testing • Dynamic recrystallisation occurs in specimens deformed at higher temperatures and lower strain rates.

36 MATERIALS SCIENCE↗

A Series of Supramolecular Complexes for Solar Energy Conversion via Water Reduction to Produce Hydrogen: An Excited State Kinetic Analysis of Ru(II),Rh(III),Ru(II) Photoinitiated Electron Collectors

Mixed-metal supramolecular complexes have been designed that photochemically absorb solar light, undergo photoinitiated electron collection and reduce water to produce hydrogen fuel using low energy visible light. This manuscript describes these systems with an analysis of the photophysics of a series of six supramolecular complexes, [{(TL)2Ru(dpp)}2RhX2](PF6)5 with TL = bpy, phen or Ph2phen with X = Cl or Br. The process of light conversion to a fuel requires a system to perform a number of complicated steps including the absorption of light, the generation of charge separation on a molecular level, the reduction by one and then two electrons and the interaction with the water substrate to produce hydrogen. The manuscript explores the rate of intramolecular electron transfer, rate of quenching of the supramolecules by the DMA electron donor, rate of reduction of the complex by DMA from the 3 MLCT excited state, as well as overall rate of reduction of the complex via visible light excitation. Probing a series of complexes in detail exploring the variation of rates of important reactions as a function of sub-unit modification provides insight into the role of each process in the overall efficiency of water reduction to produce hydrogen. The kinetic analysis shows that the complexes display different rates of excited state reactions that vary with TL and halide. The role of the MLCT excited state is elucidated by this kinetic study which shows that the 3 MLCT state and not the 3 MMCT is likely that key contributor to the photoreduction of these complexes. The kinetic analysis of the excited state dynamics and reactions of the complexes are important as this class of supramolecules behaves as photoinitiated electron collectors and photocatalysts for the reduction of water to hydrogen.

supramolecular photocatalysis↗

Effects of prior deformation and annealing process on microstructure and annealing twin density in a nickel based alloy

The nickel based alloys with different Σ3 boundary density were achieved by cold-rolling and subsequent annealing treatment. Electron backscattered diffraction analysis showed that the grain size distribution changed with the processing parameters, and the discontinuous Σ3 boundary became continuous with the increase of prior deformation level. Furthermore, the Σ3 boundary density was found to be manipulated by both grain size distribution and Σ3 boundary density per grain which showed an increasing trend with prior deformation level and annealing temperature. - Highlights: • The prior deformation amount influenced the morphology of Σ3 boundary. • The grain size was not the only factor influencing Σ3 boundary density. • The fact that grain size distribution had an important effect on Σ3 boundary density was confirmed. • The nature of grain size distribution on Σ3 boundary density was revealed. • There was a great deviation in Σ3 boundary density between experimental results and predictions.

36 MATERIALS SCIENCE↗

Pd nanoparticles formation by femtosecond laser irradiation and the nonlinear optical properties at 532 nm using nanosecond laser pulses

Pd nanoparticles (NPs) were prepared by focused femtosecond laser irradiation of PdCl{sub 2} dissolved in ethanol. Transmission electron microscopy (TEM) analysis revealed that Pd NPs show certain crystalline microstructure, and the average diameter is 3.4 nm with narrow size distribution from 2.0 to 6.0 nm. The nonlinear optical absorption and refraction of Pd NPs solution were investigated with nanosecond laser pulses at 532 nm. The nonlinear absorption of Pd NPs is saturable at low intensity of 3.28x10{sup 11} W/m{sup 2} but it is changed to reverse saturable with the intensity increased to 7.96x10{sup 11} W/m{sup 2}, which accordingly indicates the nonlinear refraction is changed from self-defocusing to self-focusing. The transition of the nonlinear absorption with the increase in pulse intensity is analyzed by an empirical model which includes mostly saturable absorption (SA) and two-photon absorption (TPA). The intensity of saturable I{sub s} is obtained, along with TPA coefficient {beta}. SA and TPA are both originated from the interband transition between the d band and s-p conduction band. The SA possess less occupied density of states in the ground state and less unoccupied density of states in the excited state than that of TPA, so the TPA dominates the nonlinear absorption when the pulse intensity is high, leading to as-observed transition from SA to TPA. The refraction variation with increase in pulse intensity is attributed to the interband transition of electrons from d band to s-p conduction band in the Pd NPs.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Pentameric Assembly of Potassium Channel Tetramerization Domain-Containing Protein 5

We report the X-ray crystal structure of human potassium channel tetramerization domain-containing protein 5 (KCTD5), the first member of the family to be so characterized. Four findings were unexpected. First, the structure reveals assemblies of five subunits while tetramers were anticipated; pentameric stoichiometry is observed also in solution by scanning transmission electron microscopy mass analysis and analytical ultracentrifugation. Second, the same BTB (bric-a-brac, tramtrack, broad complex) domain surface mediates the assembly of five KCTD5 and four voltage-gated K(+) (Kv) channel subunits; four amino acid differences appear crucial. Third, KCTD5 complexes have well-defined N- and C-terminal modules separated by a flexible linker that swivels by approximately 30 degrees; the C-module shows a new fold and is required to bind Golgi reassembly stacking protein 55 with approximately 1 microM affinity, as judged by surface plasmon resonance and ultracentrifugation. Fourth, despite the homology reflected in its name, KCTD5 does not impact the operation of Kv4.2, Kv3.4, Kv2.1, or Kv1.2 channels.

36 MATERIALS SCIENCE↗

Creep and microstructural processes in a low-alloy 2.25%Cr1.6%W steel (ASTM Grade 23)

A low-alloy 2.25%Cr1%Mo steel (ASTM Grade 22) has been greatly improved by the substitution of almost all of the 1%Mo by 1.6%W. The improved material has been standardized as P/T23 steel (Fe–2.25Cr–1.6W–0.25V–0.05Nb–0.07C). The present investigation was conducted on T23 steel in an effort to obtain a more complete description and understanding of the role of the microstructural evolution and deformation processes in high-temperature creep. Constant load tensile creep tests were carried out in an argon atmosphere in the temperature range 500–650 °C at stresses ranging from 50 to 400 MPa. It was found that the diffusion in the matrix lattice is the creep-rate controlling process. The results of an extensive transmission electron microscopy (TEM) analysis programme to investigate microstructure evolution as a function of temperature are described and compared with the thermodynamic calculations using the software package Thermo-Calc. The significant creep-strength drop of T23 steel after long-term creep exposures can be explained by the decrease in dislocation hardening, precipitation hardening and solid solution hardening due to the instability of the microstructure at high temperature. - Highlights: • The constant load creep tests of T23 steel were carried out at 500–650 °C. • The stress exponents of the creep rate correspond to power law (dislocation) creep. • Diffusion in the matrix lattice is the creep-rate controlling process. • The microstructure instability is the main creep degradation process in T23 steel.

36 MATERIALS SCIENCE↗

ANALYSIS OF SLUDGE BATCH 4 (MACROBATCH 5) FOR CANISTER S02902 AND SLUDGE BATCH 5 (MACROBATCH 6) FOR CANISTER S03317 DWPF POUR STREAM GLASS SAMPLES

The Defense Waste Processing Facility (DWPF) began processing Sludge Batch 4 (SB4), Macrobatch 5 (MB5) on May 29, 2007. Sludge Batch 4 was a blend of the heel of Tank 40 from Sludge Batch 3 (SB3) and SB4 material qualified in Tank 51. On November 28, 2008, DWPF began processing Sludge Batch 5 (SB5) from Tank 40 which is a blend of the heel of Tank 40 from SB4, SB5 material qualified in Tank 51 and H-Canyon Pu and Np transfers. SB4 was processed using Frit 510 and SB5 used Frit 418. During processing of each sludge batch, the DWPF is required to take at least one glass sample to meet the objectives of the Glass Product Control Program and to complete the necessary Production Records so that the final glass product may be disposed of at a Federal Repository. During the processing of SB4 and SB5, glass samples were obtained during the pouring of canisters S02902 and S03317, respectively. The samples were transferred to the Savannah River National Laboratory (SRNL) where they were analyzed (durability, chemical and radionuclide composition). The following observations and conclusions are drawn from the analytical results provided in this report: (1) The sum of the oxides for the chemical composition of both the SB4 and SB5 pour stream glasses is within the Product Composition Control System (PCCS) acceptance limits (95 {le} sum of oxides {le} 105). (2) The calculated Sludge Dilution Factor (SDF) for SB4 is 2.52. The measured radionuclide content is in good agreement with the calculated values from the dried sludge results from the SB4 Waste Acceptance Production Specification (WAPS) sample (References 1 and 19). (3) The calculated SDF for SB5 is 2.60. The measured radionuclide content is in good agreement with the calculated values from the dried sludge results from the SB5 WAPS sample (References 2 and 20). (4) Scanning Electron Microscopy (SEM) analysis shows there are noble metal inclusions, primarily ruthenium, present in both pour stream samples. (5) The Product Consistency Test (PCT) results show that the SB4 pour stream glass meets the waste acceptance criteria for durability with a normalized boron release of 0.67 g/L which is an order of magnitude lower than the Environmental Assessment (EA) glass. (6) The PCT results show that the SB5 pour stream glass meets the waste acceptance criteria for durability with a normalized boron release of 0.72 g/ which is an order of magnitude lower than the EA glass. (7) The density of the SB4 glass is 2.5 g/cm{sup 3}. (8) The density of the SB5 glass is 2.6 g/cm{sup 3}.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Characterization of carbon silica hybrid fillers obtained by pyrolysis of waste green tires by the STEM–EDX method

Dual phase carbon–silica hybrid fillers obtained by pyrolysis-cum-water vapor of waste green tires have been characterized by energy dispersive X-ray spectroscopy in a scanning transmission electron microscope, silicate analysis, weight analysis, atomic absorption spectroscopy and by inductively coupled plasma–optical emission spectroscopy. The results achieved have shown that the location and distribution of the phases in the carbon silica hybrid fillers as well as their most essential characteristics are influenced by the pyrolysis conditions. The carbon phase of the filler thus obtained is located predominantly in the space among silica aggregates which have already been existing while it has been formed by elastomer destruction in the course of pyrolysis. The presence of ZnS also has been found in the hybrid fillers investigated. - Highlights: • Dual phase fillers obtained by pyrolysis of waste green tires have been characterized. • The STEM–EDX method was used for characterization. • The phase distributions in the fillers are influenced by the pyrolysis conditions.

36 MATERIALS SCIENCE↗