Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “different dimensions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,639 records · Page 91

Glassy quantum nuclear pasta in neutron star crusts

We conduct a comprehensive survey of the shape parameter space of the nuclear pasta phases in neutron star crusts by conducting three-dimensional Hartree-Fock + BCS calculations. Spaghetti, waffles, lasagna, bicontinuous phases and cylindrical holes occupy local minima in the resulting constant-pressure Gibbs energy surfaces, implying multiple geometries coexist at a given depth. Notably, the bicontinuous phase, in which both the neutron gas and nuclear matter extend continuously in all dimensions appears over a large depth range. Our results support the idea that nuclear pasta is a glassy system. At a characteristic temperature, of order 10 8 – 10 9 K, different phases may become frozen into domains whose sizes we estimate to be 1–50 times the lattice spacing and over which the local density and electron fraction can vary. Above this temperature, very little long-range order exists and matter is an amorphous solid. Electron scattering off domain boundaries may contribute to the disorder resistivity of the pasta phases. Annealing of the domains may occur during cooling; repopulating of local minima during crustal heating might lead to temperature-dependent transport properties in the deep crust layers. We identify four regions distinguished by whether pasta is the true ground state, and whether the pasta structure allows delocalization of protons. The whole pasta region can occupy up to 70% of the crust by mass and 25% by thickness, and the layer in which protons are delocalized could occupy 45% of the crust mass and 15% of its thickness.

79 ASTRONOMY AND ASTROPHYSICS↗

Alternative refined Gribov-Zwanziger Lagrangian

We consider the implications of the condensation of a general local Becchi-Rouet-Stora-Tyutin invariant dimension two operator built out of the localizing ghost fields of the Gribov-Zwanziger Lagrangian which is a localized Lagrangian incorporating the Gribov problem in the Landau gauge. For different color tensor projections of the general operator, the properties of a frozen gluon propagator and unenhanced Faddeev-Popov ghost propagator, which are observed in lattice computations, can be reproduced. The alternative possibilities are distinguished by the infrared structure of the propagators of the spin-1 fields, other than those of the gluon and Faddeev-Popov ghost, for which there is no numerical simulation data to compare with yet.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Dynamics of flat anisotropic models in Lovelock gravity: The even-dimensional case

In this article, we give a full description of the dynamics of the flat anisotropic (4+1)-dimensional cosmological model in the presence of both Gauss-Bonnet and Einstein contributions. This is the first complete description of this model with both terms taken into account. Our data is obtained using the numerical analysis, though, we use analytics to explain some features of the results obtained, and the same analytics could be applied to higher-dimensional models with higher-order Lovelock corrections. Firstly, we investigate the vacuum model and give a description of all regimes; then, we add a matter source in the form of a perfect fluid and study the influence the matter exerts upon the dynamics. Thus, we give a description of matter regimes as well. Additionally, we demonstrate that the presence of matter not only improves the situation with a smooth transition between the standard singularity and the Kasner regime, but also brings additional regimes and even partially erases the boundaries between different regimes inside the same triplet. Finally, we discuss the numerical and analytical results obtained and their generalization to the higher-order models with an even number of spatial dimensions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

(2 + δ)-dimensional theory of the electromechanics of lipid membranes: Electrostatics

The coupling of electric fields to the mechanics of lipid membranes gives rise to intriguing electromechanical behavior, as, for example, evidenced by the deformation of lipid vesicles in external electric fields. Electromechanical effects are relevant for many biological processes, such as the propagation of action potentials in axons and the activation of mechanically gated ion channels. Currently, a theoretical framework describing the electromechanical behavior of arbitrarily curved and deforming lipid membranes does not exist. Purely mechanical models commonly treat lipid membranes as two-dimensional surfaces, ignoring their finite thickness. While holding analytical and numerical merit, this approach cannot describe the coupling of lipid membranes to electric fields and is thus unsuitable for electromechanical models. In a sequence of articles, we derive an effective surface theory of the electromechanics of lipid membranes, called the (2 + δ)-dimensional theory, which has the advantages of surface descriptions while accounting for finite thickness effects. The present article proposes a generic dimension reduction procedure relying on low-order spectral expansions. This procedure is applied to the electrostatics of lipid membranes to obtain the (2 + δ)-dimensional theory that captures potential differences across and electric fields within lipid membranes. Finally, this model is tested on different geometries relevant for lipid membranes, showing good agreement with the corresponding three-dimensional electrostatics theory.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Reconstructing the three-dimensional latent image of extreme ultraviolet resists with resonant soft x-ray scattering

© 2019 Society of Photo-Optical Instrumentation Engineers (SPIE). Extreme ultraviolet (EUV) lithography is one of the most promising printing techniques for high-volume semiconductor manufacturing at the 14-nm half-pitch device node and beyond. However, key challenges around EUV photoresist materials, such as the exposure-dose sensitivity or the line-width roughness, continue to impede its full adoption into industrial nanofab facilities. Metrology tools are required to address these challenges by helping to assess the impact of the EUV materials' properties and processing conditions along different steps of the nanofabrication process. We apply the resonant soft x-ray scattering (RSoXS) technique to gain insights into the structure of patterned EUV resists before the development step takes place. By using energies around the carbon K-edge to take advantage of small differences in chemistry, the electronic density contrast between the exposed and unexposed regions of the resists could be enhanced in order to image the patterns with subnanometer precision. Critical-dimension grazing-incidence small-angle x-ray scattering is then performed at energies where the contrast is maximized, enabling the reconstruction of the three-dimensional shape of the latent image. We demonstrate the potential of RSoXS to provide a high-resolution height-sensitive profile of patterned EUV resists, which will help in quantifying the evolution of critical features, such as the line-edge roughness, at a key step of the nanofabrication process.

Freychet, Guillaume↗

SU-G-201-08: Energy Response of Thermoluminescent Microcube Dosimeters in Water for Kilovoltage X-Ray Beams

Purpose: To characterize the energy dependence for TLD-100 microcubes in water at kilovoltage energies. Methods: TLD-100 microcubes with dimensions of (1 × 1 × 1) mm{sup 3} were irradiated with kilovoltage x-rays in a custom-built thin-window liquid water phantom. The TLD-100 microcubes were held in Virtual Water™ probes and aligned at a 2 cm depth in water. Irradiations were performed using the M-series x-ray beams of energies ranging from 50-250 kVp and normalized to a {sup 60}Co beam located at the UWADCL. Simulations using the EGSnrc Monte Carlo Code System were performed to model the x-ray beams, the {sup 60}Co beam, the water phantom and the dosimeters in the phantom. The egs-chamber user code was used to tally the dose to the TLDs and the dose to water. The measurements and calculations were used to determine the intrinsic energy dependence, absorbed-dose energy dependence, and absorbed-dose sensitivity. These values were compared to TLD-100 chips with dimensions of (3.2 × 0.9 × 0.9) mm{sup 3}. Results: The measured TLD-100 microcube response per dose to water among all investigated x-ray energies had a maximum percent difference of 61% relative to {sup 60}Co. The simulated ratio of dose to water to the dose to TLD had a maximum percent difference of 29% relative to {sup 60}Co. The ratio of dose to TLD to the TLD output had a maximum percent difference of 13% relative to {sup 60}Co. The maximum percent difference for the absorbed-dose sensitivity was 15% more than the used value of 1.41. Conclusion: These results confirm that differences in beam quality have a significant effect on TLD response when irradiated in water. These results also indicated a difference in TLD-100 response between microcube and chip geometries. The intrinsic energy dependence and the absorbed-dose energy dependence deviated up to 10% between TLD-100 microcubes and chips.

60 APPLIED LIFE SCIENCES↗

Experimental Investigation of Low-Frequency Distributed Acoustic Strain-Rate Responses to Propagating Fractures

Summary Low-frequency distributed acoustic sensing (LF-DAS) responds to strain changes due to far-field fracture propagation. To better understand the LF-DAS response to fracture propagation, we performed laboratory-scale hydraulic fracture experiments with embedded optical strain sensors. The objectives of this research are to generate hydraulic fractures of known geometry, measure the strain response along the embedded fiber-optic cable comparable to LF-DAS measurements, and use the results to inform the interpretation of field-derived LF-DAS data. The experiments were conducted in unconfined transparent cubic blocks with a dimension of 8 in. on each side. The block was made of transparent epoxy to visualize the fracture propagation. Fiber-optic sensing cables were embedded in the block at different distances to the source of injection. We injected dyed water through an injection tubing to generate a transverse, radial fracture along an initial flaw. An optical interrogator recorded the response of offset fiber Bragg grating (FBG) strain sensors normal to the plane of the fracture. The strain data were visualized on a waterfall plot, akin to visualizations of field-derived LF-DAS data. Dimensional analysis was used to scale the laboratory results to field conditions. We compared the evolution of the strain response at the fiber-optic cable, injection pressure, and rate with known fracture geometry. The measured strains were compared with Sneddon’s (1946) linear elastic solution for a penny-shaped crack and found to follow this behavior. The generated radial fractures in transparent media can be modeled with Sneddon’s linear elastic radial fracture model and a Mode I critical stress intensity factor. The LF-DAS characteristic response of a narrowing region of extension surrounded by compression was exhibited as a fracture that approached and intersected the fiber-optic cable. The experimentally derived strain and strain-rate waterfall plots with known fracture geometry, injection rate, and pressure response provide insight in understanding LF-DAS responses in the field. Furthermore, we developed a method to estimate fracture geometry evolution from the fiber-optic strain data and validated the method against the experimental data.

Engineering↗

2018 Bryan Mound Baseline Casing Analysis

This report analyzes data from multi-arm caliper (MAC) surveys taken at the Bryan Mound Strategic Petroleum Reserve site to determine baseline statistics for the original innermost cemented casing or the subsequent installed liner. Along with analyzing the internal diameters from the MAC surveys, this analysis looks to approximate casing weight, an important metric for determining the strength of well sections. Casing weight is calculated for each section, survey, and well. Results from the analysis show most wells reflect the dimensions in the original as-built drawings. There are, however, a few exceptions. Some well sections have calculated wall thicknesses outside API tolerance. In addition, some well section depths differ from the as-built drawings. All results are discussed on a well-by-well basis. Where applicable, information from this report should be used to update as-built drawings and aid in creating more accurate well models for future studies.

02 PETROLEUM↗

TREAT Fuel Motion Summary Report. SETH A-E Experiments

In support of the Accident Tolerant Fuels program, experiment devices are being developed to enable transient testing of pressurized water reactor (PWR) type fuel specimens. In fiscal year 2019 several fueled tests were conducted in the Transient Reactor Test Facility (TREAT) using the Separate Effects Test Holder (SETH). Five different SETH capsules (SETH A-E) were assembled, each holding a 10-pellet rodlet with 4.9% enriched, commercially-produced fresh UO2 pellets in zirconium alloy cladding with pellet dimensions having typical PWR radial dimensions and a total pellet stack length measuring 10.16 cm. The rodlet’s length allows the specimen to be axially positioned in the center of the core with minimal flux variation over the height of the rodlet. The fuel motion monitoring system (FMMS) is located on the north side of the TREAT reactor. Having direct line-of-sight of the core enables the FMMS to collect spatially-resolved data for fast neutrons generated due to fission occurring in experiment specimens. The FMMS contains 360 channels that make up a 10 (horizontal) by 36 (vertical) array of viewing slots; for the SETH A-E test series 96 proton-recoil scintillator (PRS) detectors were installed in the system. The fast neutrons are detected in the PRS detectors from light produced by the recoil of protons interacting with ZnS(Ag) grains in each detector's scintillator button. This report focuses on the FMMS data captured in the SETH A-E experiments, with multiple transients varying in reactivity addition and length. The first three experiments had a total reactor energy of 101 MJ each and were critical in understanding the FMMS field of view, lead shielding, and other TREAT data acquisition systems. SETH-B2 and C had a reactivity addition of almost double the previous transients and served as a demonstration of the detector array behavior under increased reactor energy. The final two SETH experiments (D and E) were aimed at reaching cladding melting temperatures with a reactor energy over 500 MJ for each test. In preparation for the higher energy transients, the FMMS lead shielding was reduced to 0.5 inches from the 6 inches used in SETH A-C. This was expected to saturate the detectors at the peak of the transient in exchange for higher sensitivity at lower energies after the peak, when the motion was expected. SETH-D was clipped at approximately 3 seconds, which was too early for the FMMS to capture any rodlet motion. SETH-E had the same reactivity addition as SETH-D but the transient time was extended to 18 seconds. The FMMS captured the downward motion of the rodlet in SETH-E as the count rate significantly changed for the detectors viewing the specimen. Snapshots taken throughout the transient helped identify the approximate time at which the motion initiated. Further analysis of the individual detector data captured on a per-millisecond time basis resulted in a determination that the approximate time for the onset of the downward motion was 2.84 ± 0.02 seconds. Neutron radiographs confirmed that downward motion occurred for SETH-D and SETH-E. Motion in SETH-D could also have been captured by the FMMS if the transient time had been longer for SETH-D. Ultimately, these final two tests served to demonstrate the FMMS's ability to track fuel motion during transient experiments at TREAT.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Diagnostics for measuring 4D beam matrix [Slides]

Detailed knowledge on the particle distribution in accelerators can strongly benefit machine tuning and understanding of deleterious effects, which degrade beam quality. Properties of the beam downstream the beamline (i.e. 4D beam matrix) depend on beam properties upstream and parameters of the beamline. Measuring 2D x-y beam profile downstream provides limited information about the beam. Multiple measurements at different settings of the beamline (quadrupole scan) may provide enough information to recover original beam profile. Essentially, this concept is similar to tomography, when we need to reconstruct a higher dimension object from multiple low dimension projections.

43 PARTICLE ACCELERATORS↗

Impact-induced energy partitioning, melting, and vaporization on terrestrial planets

The reported investigation was conducted in connection with the desirability to obtain information regarding the response of a solidified planetary surface to the primary impact of a meteoroid whose dimensions are small compared to that of the planet. The investigation is an extension of studies conducted by Ahrens and O'Keefe (1977) concerned with a calculation via finite-difference techniques of the entire flow field, the energy partitioning, and the quantity of melt and vapor produced upon impact of an iron object on a gabbroic anorthosite half-space at 15 km/sec. The assumptions used in these calculations are summarized. Calculations based on an equation of state for the low- and high-pressure mineral assemblage of gabbroic anorthosite, initial density 2.94 g/cu cm are considered. An algorithm is formulated for the description of the phase transformation upon shock loading. It is shown that the relative volume of melt and the equivalent volume of shock-induced vapor is proportional to the meteoroid kinetic energy (at high speeds) using the similarity scaling of projectile and target properties as suggested by Dienes and Walsh (1970).

Okeefe, J. D.↗

Some recent advances in computational aerodynamics for helicopter applications

The growing application of computational aerodynamics to nonlinear helicopter problems is outlined, with particular emphasis on several recent quasi-two-dimensional examples that used the thin-layer Navier-Stokes equations and an eddy-viscosity model to approximate turbulence. Rotor blade section characteristics can now be calculated accurately over a wide range of transonic flow conditions. However, a finite-difference simulation of the complete flow field about a helicopter in forward flight is not currently feasible, despite the impressive progress that is being made in both two and three dimensions. The principal limitations are today's computer speeds and memories, algorithm and solution methods, grid generation, vortex modeling, structural and aerodynamic coupling, and a shortage of engineers who are skilled in both computational fluid dynamics and helicopter aerodynamics and dynamics.

Mccroskey, W. J.↗

Multi-airfoil Navier-Stokes simulations of turbine rotor-stator interaction

An accurate numerical analysis of the flows associated with rotor-stator configurations in turbomachinery can be extremely helpful in optimizing the performance of turbomachinery. In this study the unsteady, thin-layer, Navier-Stokes equations in two spatial dimensions are solved on a system of patched and overlaid grids for a rotor-stator configuration from an axial turbine. The governing equations are solved using a finite-difference, upwind algorithm that is set in an iterative, implicit framework. Results in the form of pressure contours, time-averaged pressures, unsteady pressure amplitudes and phase are presented. The numerical results are compared with experimental data and the agreement is found to be good. The results are also compared with those of an earlier study which used only one rotor and one stator. The current study uses multiple rotors and stators and a pitch ratio that is much closer to the experimental ratio. Consequently the results of this study are found to be closer to the experimental data.

Rai, Man Mohan↗

Materials science research in microgravity

There are several important attributes of an extended duration microgravity environment that offer a new dimension in the control of the microstructure, processing, and properties of materials. First, when gravitational effects are minimized, buoyancy driven convection flows are also minimized. The flows due to density differences, brought about either by composition or temperature gradients will then be reduced or eliminated to permit a more precise control of the temperature and the composition of a melt which is critical in achieving high quality crystal growth of electronic materials or alloy structures. Secondly, body force effects such as sedimentation, hydrostatic pressure, and deformation are similarly reduced. These effects may interfere with attempts to produce uniformly dispersed or aligned second phases during melt solidification. Thirdly, operating in a microgravity environment will facilitate the containerless processing of melts to eliminate the limitations of containment for reactive melts. The noncontacting forces such as those developed from electromagnet, electrostatic, or acoustic fields can be used to position samples. With this mode of operation, contamination can be minimized to enable the study of reactive melts and to eliminate extraneous crystal nucleation so that novel crystalline structures and new glass compositions may be produced. In order to take advantage of the microgravity environment for materials research, it has become clear that reliable processing models based on a sound ground based experimental experience and an established thermophysical property data base are essential.

Perepezko, John H.↗

Single crystal silicon filaments fabricated in SOI: A potential IR source for a microfabricated photometric CO2 sensor

The objective of this project was to design, fabricate, and test single crystal silicon filaments as potential black body IR sources for a spectrophotometric CO2 sensing microsystem. The design and fabrication of the silicon-on-insulator (SOI) filaments are summarized and figures showing the composite layout of the filament die (which contains four filaments of different lengths -- 500 microns, 1 mm, 1.5 mm and 2 mm -- and equal widths of 15 microns) are presented. The composite includes four mask layers: (1) silicon - defines the filament dimensions and contact pads; (2) release pit - defines the oxide removed from under the filament and hence, the length of the released filament; (3) Pyrex pit - defines the pit etched in the Pyrex cap (not used); and (4) metal - defines a metal pattern on the contact pads or used as a contact hole etch. I/V characteristics testing of the fabricated SOI filaments is described along with the nitride-coating procedures carried out to prevent oxidation and resistance instability.

Tu, Juliana↗

Improving Global Reanalyses and Short Range Forecast Using TRMM and SSM/I-Derived Precipitation and Moisture Observations

Global reanalyses currently contain significant errors in the primary fields of the hydrological cycle such as precipitation, evaporation, moisture, and the related cloud fields, especially in the tropics. The Data Assimilation Office (DAO) at the NASA Goddard Space Flight Center has been exploring the use of tropical rainfall and total precipitable water (TPW) observations from the TRMM Microwave Imager (TMI) and the Special Sensor Microwave/ Imager (SSM/I) instruments to improve short-range forecast and reanalyses. We describe a "1+1"D procedure for assimilating 6-hr averaged rainfall and TPW in the Goddard Earth Observing System (GEOS) Data Assimilation System (DAS). The algorithm is based on a 6-hr time integration of a column version of the GEOS DAS, hence the "1+1"D designation. The scheme minimizes the least-square differences between the observed TPW and rain rates and those produced by the column model over the 6-hr analysis window. This 1+lD scheme, in its generalization to four dimensions, is related to the standard 4D variational assimilation but uses analysis increments instead of the initial condition as the control variable. Results show that assimilating the TMI and SSM/I rainfall and TPW observations improves not only the precipitation and moisture fields but also key climate parameters such as clouds, the radiation, the upper-tropospheric moisture, and the large-scale circulation in the tropics. In particular, assimilating these data reduce the state-dependent systematic errors in the assimilated products. The improved analysis also provides better initial conditions for short-range forecasts, but the improvements in forecast are less than improvements in the time-averaged assimilation fields, indicating that using these data types is effective in correcting biases and other errors of the forecast model in data assimilation.

Hou, Arthur Y.↗

A Tool for Automatic Data Distribution for CFD Applications on Structured Grids

Development of HPF versions of NPB and ARC3D has shown that HPF provides an efficient, concise way to express parallelism and to organize data traffic. The use of HPF, as noted in the papers, requires an intimate knowledge of the applications and a detailed analysis of data affinity, data movement, and data granularity. To simplify and accelerate the task of developing HPF versions of existing CFD applications we have designed and implemented ADAPT (Automatic Data Alignment and Placement Tool). ADAPT analyzes a CFD application working on a single structured grid and generates HPF TEMPLATE, (RE)DISTRIBUTION, ALIGNMENT, and INDEPENDENT directives. The directives can be generated on the nest level, subroutine level, application level, or on the application interface level. ADAPT annotates an existing CFD FORTRAN application, performing computations on single or multiple grids. On each grid the application is considered as a sequence of operators, each applied to a set of variables defined in a particular grid domain. ADAPT automatically detects implicit operators (i.e., having data dependences) and explicit operators (without data dependences). For parallelization of an explicit operator ADAPT creates a template for the operator domain, aligns arrays used in the operator with the template, distributes the template, and declares the loops over the distributed dimensions as INDEPENDENT. For parallelization of an implicit operator, the distribution of the operator's domain should be consistent with the operator's dependences. Any dependence between sections distributed on different processors would preclude parallelization if the compiler does not have an ability to pipeline computations. If a data distribution is "orthogonal" to the dependences of an implicit operator, then the loop which implements the operator can be declared as INDEPENDENT. ADAPT starts with an analysis of array index expressions of the loop nests. For each pair of arrays referenced in an assignment statement, it generates an arc in the alignment graph and annotates it with an affinity relation. The template, alignment, and distribution directives for a particular loop nest are then derived from a transitive closure of the affinity relation. A compromise of data distributions in different nests and subroutines is achieved by merging annotated alignment graphs for adjacent nests/stibroutine calls in the nest/call graph of the application in the process called distribution lifting. ADAPT has been implemented as a C++ program running in conjunction with a parallelization tool called CAPTools. ADAPT uses the parse tree, interprocedural analysis and application database generated by CAPTools. It also uses the Directed Graph class, initially implemented in p2d2 (parallel debugger oi distributed programs), and some other classes supporting symbolic computations. ADAPT uses data distribution techniques described. ADAPT was tested with ARC3D and the FT benchmark and has demonstrated a code performance within a factor of 1.5 of handwritten versions.

Frumkin, Michael↗

Three-Dimensional High-Order Spectral Finite Volume Method for Unstructured Grids

Many areas require a very high-order accurate numerical solution of conservation laws for complex shapes. This paper deals with the extension to three dimensions of the Spectral Finite Volume (SV) method for unstructured grids, which was developed to solve such problems. We first summarize the limitations of traditional methods such as finite-difference, and finite-volume for both structured and unstructured grids. We then describe the basic formulation of the spectral finite volume method. What distinguishes the SV method from conventional high-order finite-volume methods for unstructured triangular or tetrahedral grids is the data reconstruction. Instead of using a large stencil of neighboring cells to perform a high-order reconstruction, the stencil is constructed by partitioning each grid cell, called a spectral volume (SV), into 'structured' sub-cells, called control volumes (CVs). One can show that if all the SV cells are partitioned into polygonal or polyhedral CV sub-cells in a geometrically similar manner, the reconstructions for all the SVs become universal, irrespective of their shapes, sizes, orientations, or locations. It follows that the reconstruction is reduced to a weighted sum of unknowns involving just a few simple adds and multiplies, and those weights are universal and can be pre-determined once for all. The method is thus very efficient, accurate, and yet geometrically flexible. The most critical part of the SV method is the partitioning of the SV into CVs. In this paper we present the partitioning of a tetrahedral SV into polyhedral CVs with one free parameter for polynomial reconstructions up to degree of precision five. (Note that the order of accuracy of the method is one order higher than the reconstruction degree of precision.) The free parameter will be determined by minimizing the Lebesgue constant of the reconstruction matrix or similar criteria to obtain optimized partitions. The details of an efficient, parallelizable code to solve three-dimensional problems for any order of accuracy are then presented. Important aspects of the data structure are discussed. Comparisons with the Discontinuous Galerkin (DG) method are made. Numerical examples for wave propagation problems are presented.

Liu, Yen↗