Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “coupled system”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,639 records · Page 91
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

The photoionization of methoxymethanol: Fingerprinting a reactive C 2 oxygenate in a complex reactive mixture

Methoxymethanol (CH 3 OCH 2 OH) is a reactive C 2 ether-alcohol that is formed by coupling events in both heterogeneous and homogeneous systems. It is found in complex reactive environments—for example those associated with catalytic reactors, combustion systems, and liquid-phase mixtures of oxygenates. Using tunable synchrotron-generated vacuum-ultraviolet photons between 10.0 and 11.5 eV, we report on the photoionization spectroscopy of methoxymethanol. We determine that the lowest-energy photoionization process is the dissociative ionization of methoxymethanol via H-atom loss to produce [C 2 H 5 O 2 ] + , a fragment cation with a mass-to-charge ratio (m/z) = 61.029. Here, we measure the appearance energy of this fragment ion to be 10.24 ± 0.05 eV. The parent cation is not detected in the energy range examined. To elucidate the origin of the m/z = 61.029 (C 2 H 5 O 2 ) fragment, we used automated electronic structure calculations to identify key stationary points on the cation potential energy surface and compute conformer-specific microcanonical rate coefficients for the important unimolecular processes. The calculated H-atom dissociation pathway results in a [C 2 H 5 O 2 ] + fragment appearance at 10.21 eV, in excellent agreement with experimental results.

Hansen, Niko A.↗
DOE OSTI2021

Tuning electrical and interfacial thermal properties of bilayer MoS2 via electrochemical intercalation

Layered two-dimensional (2D) materials such as MoS 2 have attracted much attention for nano- and opto-electronics. Recently, intercalation (e.g. of ions, atoms, or molecules) has emerged as an effective technique to modulate material properties of such layered 2D films reversibly. We probe both the electrical and thermal properties of Li-intercalated bilayer MoS 2 nanosheets by combining electrical measurements and Raman spectroscopy. Furthermore, we demonstrate reversible modulation of carrier density over more than two orders of magnitude (from 0.8 × 10 12 to 1.5 × 10 14 cm -2 ), and we simultaneously obtain the thermal boundary conductance between the bilayer and its supporting SiO 2 substrate for an intercalated system for the first time. This thermal coupling can be reversibly modulated by nearly a factor of eight, from 14 ± 4.0 MW m -2 K -1 before intercalation to 1.8 ± 0.9 MW m -2 K -1 when the MoS 2 is fully lithiated. These results reveal electrochemical intercalation as a reversible tool to modulate and control both electrical and thermal properties of 2D layers.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2023

Delamination imaging in composites using cross-correlation method by non-contact air-coupled Lamb waves

Abstract This paper presents a cross-correlation damage detection technique using damage scattered waves of all directions cross-correlate with the incident waves for delamination imaging in carbon fiber reinforced polymer (CFRP) composite plate. The presented imaging can not only detect the delamination but also precisely quantify the damage with locations and sizes. First, a CFRP composite sample with interlaminar delamination by inserting the Teflon layer is designed and manufactured in house using the hot-press machine. And a three-dimensional model of composite sample is simulated using the finite element method. Next, the cross-correlation imaging algorithm is introduced in detail, and the cross-correlation imaging proof-of-concept study is conducted with the simulated Lamb waves in the composite sample. Finally, a fully non-contact air-coupled transducer and scanning laser Doppler vibrometer system with a single-mode Lamb wave method is established to actuate and sense the interrogating Lamb waves in the structure. The imaging method is experimentally implemented for the one delamination and two delaminations imaging and quantification.

Instruments & Instrumentation↗
DOE OSTI2025

High-resolution neutron diffraction determination of noncollinear antiferromagnetic order in the honeycomb magnetoelectric Fe 4 ⁢Nb 2⁢ O 9

Magnetoelectric systems offer potential for device applications exploiting coupled states between electric and magnetic properties. Among magnetoelectric materials, Fe 4 ⁢Nb 2 ⁢O 9 has attracted special attention because of its pronounced dielectric signal at high magnetic transition temperatures. However, the magnetic ground state, which is essential information for understanding its unusual magnetoelectricity, remains unclarified. Here, we report a noncollinear magnetic ground state of Fe 4 ⁢Nb 2 ⁢O 9 . To examine the magnetoelectric effect associated with sequential magnetic and structural transitions upon cooling, we conducted combined x-ray diffraction, magnetic susceptibility, magnetization, dielectric constant, and magnetodielectric experiments. Powder neutron diffraction experiments revealed a series of magnetic Bragg peaks and clear splitting of peaks via structural transition. Magnetic Rietveld refinements, combined with group theory analysis, determined a noncollinear antiferromagnetic structure including a significant 𝑐-axis moment component at 1.5 K. This article provides insights into the understanding of its magnetoelectric properties.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Gauge invariance of light-matter interactions in first-principle tight-binding models

In this work, we study the different ways of introducing light-matter interaction in first-principle tight-binding (TB) models. The standard way of describing optical properties is the velocity gauge, defined by linear coupling to the vector potential. In finite systems a transformation to represent the electromagnetic radiation by the electric field instead is possible, albeit subtleties arise in periodic systems. The resulting dipole gauge is a multi-orbital generalization of the Peierls substitution. In this work we investigate the accuracy for both pathways, with particular emphasis on gauge invariance, for TB models constructed from maximally localized Wannier functions. This approach accurately captures the light-matter interaction close to the Fermi level. Focusing on paradigmatic two-dimensional materials, we construct first-principle models and calculate the response to electromagnetic fields in linear response and for strong excitations. Benchmarks against fully converged first-principle calculations allow for ascertaining the accuracy of the TB models. We find that the dipole gauge provides a more accurate description than the velocity gauge in all cases. The main deficiency of the velocity gauge is an imperfect cancellation of paramagnetic and diamagnetic current. Formulating a corresponding sum rule however provides a way to explicitly enforce this cancellation. This procedure corrects the TB models in the velocity gauge, yielding excellent agreement with dipole gauge and thus restoring gauge invariance.

2-dimensional systems↗
DOE OSTI2022

$\textit{J}$ = 0 nonmagnetic insulating state in K 2 OsX 6 ($\textit{X}$ = F, Cl, and Br)

In 4$\textit{d}$ /5$\textit{d}$ transition-metal systems, many interesting physical properties arise from the interplay of bandwidth, electronic correlations, and spin-orbit interactions. Here, using ab initio density functional theory, we systematically study the double-perovskite-like system K 2 OsX6 ($\textit{X}$ = F, Cl, and Br) with a $5d^4$ electronic configuration. In this work, our main result is that the $\textit{J}$ = 0 nonmagnetic insulating state develops in this system, induced by strong spin-orbit coupling (SOC). Specifically, the well-separated OsX 6 octahedra lead to the cubic crystal-field limit and result in dramatically decreasing hoppings among nearest neighbor Os-Os sites. In this case, the three degenerate $t_{2g}$ orbitals are reconstructed into two “effective” $j_{\text{eff}}$ ($j_{\text{eff}}$ = 1/2 and $j_{\text{eff}}$ = 3/2 states) states separated by the strong SOC, opening a gap with four electrons occupying the$j_{\text{eff}}$ = 3/2 orbitals. Furthermore, the hybridization between the Os 5$\textit{d}$ orbitals and the $\textit{X}$ ($\textit{X}$ = F, Cl, and Br) $\textit{p}$ orbitals increases from F to Br, leading the electrons in K 2 OsF 6 to be more localized than in K 2 OsCl 6 and K 2 OsBr 6 , resulting in a smaller bandwidth for K 2 OsF 6 than in the Cl- or Br-cases. Our results provide guidance to experimentalists and theorists working on this interesting family of osmium halides.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

$\mathcal{PT}$-Symmetric Topological Edge-Gain Effect

In this work, we demonstrate a non-Hermitian topological effect that is characterized by having complex eigenvalues only in the edge states of a topological material, despite the fact that the material is completely uniform. Such an effect can be constructed in any topological structure formed by two gapped subsystems, e.g., a quantum spin-Hall system, with a suitable non-Hermitian coupling between the spins. The resulting complex-eigenvalued edge state is robust against defects due to the topological protection. In photonics, such an effect can be used for the implementation of topological lasers, in which a uniform pumping provides gain only in the edge lasing state. Furthermore, such a topological lasing model is reciprocal and is thus compatible with standard photonic platforms.

42 ENGINEERING↗
DOE OSTI2019

Microwave Meissner screening properties of proximity-coupled topological-insulator / superconductor bilayers

The proximity-coupled topological-insulator / superconductor (TI/SC) bilayer system is a representative system to realize topological superconductivity. In order to better understand this unique state and enable future applications of the TI/SC bilayer, a comprehensive characterization and understanding of the microscopic properties of the bilayer are required. In this work, a microwave Meissner screening study, which exploits a high-precision microwave resonator technique, is conducted on the SmB 6 /YB 6 thin-film bilayers as an example TI/SC system. The study reveals spatially dependent electrodynamic screening response of the TI/SC system that is not accessible to other techniques, from which the corresponding microscopic properties of a TI/SC bilayer can be obtained. The TI thickness dependence of the effective penetration depth suggests the existence of a bulk insulating region in the TI layer. The spatially dependent electrodynamic screening model analysis provides an estimate for the characteristic lengths of the TI/SC bilayer: normal penetration depth, normal coherence length, and the thickness of the surface states.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

Structural and electronic properties of the first iridium containing mixed B-site spinel oxide: Cu [ Ir 1.5 Cu 0.5 ] O 4

Geometrically frustrated systems populated with large spin-orbit coupled ions are an ideal setting for the exploration of novel exotic states of matter. In this study we present an example of iridium on a mixed B-site spinel oxide structure: Cu [ Ir 1.498 ( 2 ) Cu 0.502 ( 2 ) ] O 4 . Synchrotron XRD refinements reveal a face-centered-cubic structure with space group F d 3 ¯ m and mixed Cu-Ir site disorder within the B 2 O 4 rocksalt substructure. Electrical properties reveal a metallic state within the 50–600-K range with a Kondo effect at T < 50 K . X-ray absorption spectroscopy (XAS) measurements show a mixed Cu 1 + / 2 + and Ir 3 + / 4 + charge partitioned picture, which suggests a metallic/band description with reduced on-site Coulomb interactions. Spin-glass-like freezing is seen at T g = 49 K , and the hysteresis behavior for T > T g resembles that of a strongly frustrated magnet. DFT calculations show sizable hybridization between the Cu 3 d and Ir 5 d states with an effective mixed Ir 3 + / 4 + charge partitioned picture, supporting the electronic and XAS results.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Magnetic structure determination of multiple phases in the multiferroic candidate GdCrO 3

Due to their potential applications in low-power consumption and/or multistate memory devices, multiferroic materials have attracted a lot of attention in the condensed matter community. As part of the effort to identify new multiferroic compounds, perovskite-based GdCrO 3 was studied in both bulk and thin film samples. A strong enhancement of the capacitance in a field suggested ferroelectric behaviour but significant leakage and no well developed P–E hysteresis loops were observed. Measurements clearly indicate the existence of a polar phase but only below 2 K (likely connected to Gd ordering). Here the determination of the magnetic structure through neutron diffraction collected on an isotopic 160 GdCrO 3 sample at the WISH diffractometer at ISIS is reported. The presence of three successive magnetic phases as a function of temperature (commensurate, spin re-orientation and incommensurate phases once the Gd order), previously only seen by magnetization, is confirmed. Using the most recent guidelines for reporting the determined structures, we highlight the benefits of using such nomenclature for discussing physical properties and consider possible mechanisms and couplings that led this seemingly rather isotropic system to display the complex structures observed.

incommensurate magnetic structure↗
DOE OSTI2025

Rotated-Droop Control for Enhanced Stability and Power Decoupling in Microgrids With Complex Line Impedances

Classical droop control in microgrids predominantly assumes inductive line impedance, which simplifies implementation but causes power coupling and steady-state errors in systems with resistive and inductive lines. This paper proposes a rotated-droop control strategy for grid-forming inverters that reformulates the power equations by incorporating the magnitude and angle of the line impedance within a rotated reference frame. This method enhances the decoupling of active and reactive power dynamics without increasing complexity or requiring communication links. A small-signal state-space model was created to capture the dynamic behavior of the system under varying impedance parameters, preserving the original droop gains by rotating the power control structure. This allows eigenvalue-based stability analysis and enhances damping and transient performance. Simulation and experimental results validated the improved power-sharing performance, faster response, and robustness of the proposed method under different impedance conditions. This approach maintains the decentralized structure of the conventional droop control while enabling greater adaptability and scalability, making it suitable for modern inverter-based microgrids with dynamic topologies.

Campo-Ossa, Daniel Dario [Univ. of Puerto Rico, Ag↗
DOE OSTI2024

A Comprehensive Strategy for Grid Forming Control in DC Coupled Photovoltaic and Battery Energy Storage Inverters

This paper presents an integrated DC-DC and DCAC grid-forming control strategy for DC-coupled photovoltaic (PV) plus battery energy storage systems, considering the effect of DC link voltage variations caused by direct PV connections. A power reference algorithm determines power distribution between the PV and battery to the grid while observing device power ratings to prevent the over-rating of components and keep the battery's state of charge within an acceptable range. The simulated utility-scale model in MATLAB/Simulink illustrates its ability against extreme phase angle variation contingencies in the grid while controlled through grid-forming control with a fast dynamic on DC link voltage. The simulation results confirm the effectiveness of the proposed control in integrating PV plus battery configurations with grid forming control and maintaining reliable grid operation under severe grid disturbances.

battery, boost, control, energy storage, grid form↗
DOE OSTI2022

Characterization of the molecular mechanisms of silicon uptake in coccolithophores

Coccolithophores are an important group of calcifying marine phytoplankton. Although coccolithophores are not silicified, some species exhibit a requirement for Si in the calcification process. These species also possess a novel protein (SITL) that resembles the SIT family of Si transporters found in diatoms. However, the nature of Si transport in coccolithophores is not yet known, making it difficult to determine the wider role of Si in coccolithophore biology. Here, we show that coccolithophore SITLs act as Na + -coupled Si transporters when expressed in heterologous systems and exhibit similar characteristics to diatom SITs. We find that CbSITL from Coccolithus braarudii is transcriptionally regulated by Si availability and is expressed in environmental coccolithophore populations. However, the Si requirement of C. braarudii and other coccolithophores is very low, with transport rates of exogenous Si below the level of detection in sensitive assays of Si transport. As coccoliths contain only low levels of Si, we propose that Si acts to support the calcification process, rather than forming a structural component of the coccolith itself. Si is therefore acting as a micronutrient in coccolithophores and natural populations are only likely to experience Si limitation in circumstances where dissolved silicon (DSi) is depleted to extreme levels.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

Pareto Optimal and Dual-Objective Geometric and Structural Design of an Underwater Kite for Closed-Loop Flight Performance

This paper presents the formulation and results for a control-aware optimization of the combined geometric and structural design of an energy-harvesting underwater kite. Because kite-based energy-harvesting systems, both airborne and underwater, possess strong coupling between closed-loop flight control, geometric design, and structural design, consideration of all three facets of the design within a single codesign framework is highly desirable. However, while prior literature has addressed one or two attributes of the design at a time, this work constitutes the first comprehensive effort aimed at addressing all three. In particular, focusing on the goals of power maximization and mass minimization, we present a codesign formulation that fuses a geometric optimization tool, structural optimization tool, and closed-loop flight efficiency map. The resulting integrated codesign tool is used to address two mathematical optimization formulations that exhibit subtle differences: a Pareto optimal formulation and a dual-objective formulation that focuses on a weighted power-to-mass ratio as the techno-economic metric of merit. Further, based on the resulting geometric and structural designs, using a mediumfidelity closed-loop simulation tool, the proposed formulation is shown to achieve more than three times the powerto-mass ratio of a previously published, unoptimized benchmark design.

42 ENGINEERING↗
DOE OSTI2023

Probing correlated states with plasmons

Understanding the nature of strongly correlated states in flat-band materials (such as moiré heterostructures) is at the forefront of both experimental and theoretical pursuits. While magnetotransport, scanning probe, and optical techniques are often very successful in investigating the properties of the underlying order, the exact nature of the ground state often remains unknown. Here, we propose to leverage strong light-matter coupling present in the flat-band systems to gain insight through dynamical dielectric response into the structure of the many-body ground state. We argue that because of the enlargement of the effective lattice of the system arising from correlations, conventional long-range plasmon becomes “folded” to yield a multiband plasmon spectrum. We detail several mechanisms through which the structure of the plasmon spectrum and that of the dynamical dielectric response is susceptible to the underlying order, revealing valued insights such as the interaction-driven band gaps, spin-structure, and the order periodicity.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Path Integrals for Nonadiabatic Dynamics: Multistate Ring Polymer Molecular Dynamics

This review focuses on a recent class of path-integral-based methods for the simulation of nonadiabatic dynamics in the condensed phase using only classical molecular dynamics trajectories in an extended phase space. Specifically, a semiclassical mapping protocol is used to derive an exact, continuous, Cartesian variable path-integral representation for the canonical partition function of a system in which multiple electronic states are coupled to nuclear degrees of freedom. Building on this exact statistical foundation, multistate ring polymer molecular dynamics methods are developed for the approximate calculation of real-time thermal correlation functions. As a result, the remarkable promise of these multistate ring polymer methods, their successful applications, and their limitations are discussed in detail.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Optical filters made from random metasurfaces using Bayesian optimization

Abstract We theoretically investigate the ability to design optical filters from a single material and a single layer of randomly dispersed resonant dielectric particles, defining a random metasurface. Using a Bayesian and generalized Mie inverse-design approach, we design particle radii distributions that give rise to longpass, shortpass, bandpass, and bandstop spectral bands in the infrared. The optical response is shown to be directly related to electric and magnetic multipole scattering of the constituent particles and their near field coupling. We discuss the effect of the particle size distribution and particle–particle coupling interactions on filter design in random systems lacking long-range order.

Materials Science↗
DOE OSTI2024

Influence of Antarctic and Greenland Continental Shelf Circulation on High‐Latitude Oceans in E3SM

The science objectives of this project are to simulate and understand the impacts of both deep-basin warm-water intrusions and land-ice melt on the continental shelf circulations and sea-ice distributions around the margins of Greenland and Antarctica. As well, the role of subsurface ocean heat from the Atlantic on declining sea-ice cover in the Arctic is explored. Mesoscale processes and fine bathymetry are implicated in cross-shelf property transports around both Greenland and Antarctica. Therefore, we configured and ran an atmospheric reanalysis-forced global ocean/sea-ice simulation on a grid that reduces from 8 km at the Equator to 2 km at the poles (UH8to2) with 60 vertical levels. It was produced using the Energy Exascale Earth System Model ‘‘HiLAT’’ code (E3SMv0-HiLAT) that uses the Parallel Ocean Program (POP) and CICE5 as its ocean and sea-ice components, respectively. Two main UH8to2 simulations were carried out: one for 1975-2009 and the other for July 2016-2020 after it was initialized from a 1/25° data-assimilative ocean/sea-ice prediction system ocean/sea-ice state. The UH8to2 is not coupled to an active land-ice model. Rather, land-ice melt is represented by observationally informed freshwater fluxes (FWFs). Short (multi-year) UH8to2 simulations were conducted to understand sensitivities when Greenland ice sheet (GrIS) melt is released only at the ocean surface or when it is distributed over the upper water column in accordance with fjord melt plume behavior; these cases were compared with a no GrIS melt case. West Greenland continental shelf currents were fastest in the vertical distribution case and an increase in baroclinic conversion at the shelf break associated with increased eddy kinetic energy was found relative to the surface release case. Further, salinity is lower and meltwater volume greater in the eastern Labrador Sea in the vertical distribution case. For the Arctic, the veracity of the UH8to2 was evaluated for 2017-2020 using available observations. Simulated seasonal sea-ice thickness and concentration are realistic, but the ice is unrealistically thin in the central and eastern Arctic in the fall. Comparisons of vertical sections of ocean temperature, salinity, and buoyancy collected from Ice-Tethered Profilers (ITPs) in the eastern Arctic in the fall and winter of 2019/2020 and co-located/concurrent UH8to2 fields show the stratification over the top 100 m of the water column is too low in the model, the simulated mixed layer too deep, and the simulated subsurface Atlantic Water (AW) too warm; these biases may contribute to the sea-ice biases. A model intercomparison study using the UH8to2 and a forced 1/25° regional Arctic ocean/sea-ice (uses the HYbrid Coordinate Ocean Model and CICE5) simulation further investigates the relationship between AW and sea-ice in the eastern Arctic. The models show a mesoscale-rich pulse of Atlantic Water extending into the eastern basin that reaches maximum intensity in late winter of 2018, after which it decreases in strength. Concurrent and co-located sea-ice melt or the inhibition of sea-ice growth is seen and is attributed to halocline mesoscale eddies doming into the mixed layer with convection bringing this heat into the vicinity of the sea-ice.

58 GEOSCIENCES↗