Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “cell parameters”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,639 records · Page 91

Nitrogen-Pressure Shifts in the v3 Band of Methane Measured at Several Temperatures between 300 and 90 K

Remote sensing of the Earth's atmosphere requires accurate knowledge of spectroscopic line parameters for the molecules investigated. Knowledge of the temperature dependence of these parameters is also essential if agreement, at the noise level, between calculated and experimental data is to be achieved. The authors recently published results of nitrogen broadening measurements in the v3 band of 12CH4 using the 5.37 m long absorption path length all-copper Herriott cell. The temperature dependent line parameters determined in the laboratory were applied to fit a portion of the atmospheric spectrum recorded with a balloon-borne remote sensing FTIR instrument, called the Limb Profile Monitor of the Atmosphere, and operating in absorption against the sun. Since the authors had a relatively complete series of data for the P(9) transition in the v3 band of 12CH4, the A2 1 as well as the F2 1, F1 1 and A1 1 lines recorded at different pressures and at four temperatures between 300 and 90 K, we reanalyzed the data to derive pressure shift information at different temperatures. The temperatures for which data were collected and analyzed are 298, 140 and 90K. The high precision pressure shift data obtained here over a large range of temperature demonstrate the ability of our experimental arrangement to address specific questions on a given spectral window like in the balloon experiment or in a satellite project, for example.

Tumuhimbise, Anthony T.↗

A New National MODIS-Derived Phenology Data Set Every 16 Days, 2002 through 2006

A new national phenology data set has been developed, comprised of a series of seamless 231 m national maps, every 16 days from 2001 through 2006. The data set was developed jointly by the Eastern Forest Environmental Threat Assessment Center (EFETAC) of the USDA Forest Service, and contractors of the NASA Stennis Space Center. The data are available now for dissemination and use. The first half of the National Phenology Data Set is the cumulative area under the NDVI curve since Jan 1, and increases monotonically every 16 days until the end of the year. These cumulative data values 'latch' in the event of clouds or snow, remaining at the value when we last saw this cell. The second half is a set of diagnostic parameters fit to the annual NDVI function. The spring minimum, the 20% rise, the 80% rise, the leaf-on maximum, the 80% fall, the 20% fall, and the trailing fall minimum are determined for each map cell. For each parameter, we produce both a national map of the NDVI value, and a map of the day-of-year when that NDVI value was reached. Length of growing season, as the difference between the spring and fall 20% DOYs, and date of middle of growing season can be mapped as well. The new dataset has permitted the development of a set of national phonological ecoregions, and has also proven useful for mapping Gypsy Moth defoliation, simultaneously delineating the aftermath of three Gulf Coast hurricanes, and quantifying suburban/ex-urban development surrounding metro Atlanta.

99 GENERAL AND MISCELLANEOUS↗

Modelling and design of high efficiency radiation tolerant indium phosphide space solar cells

Using a fairly comprehensive model, a parametric variation study was performed of the InP shallow homojunction solar cell with a view to determining the maximum realistically achievable efficiency and an optimum design that would yield this efficiency. Calculations show that with good-quality epitaxial material, a beginning-of-life efficiency of about 20.3 precent at 1AM0, 25 C may be possible. The design parameters of the near-optimum cell are given. Also presented are the expected effect on the performance parameters of radiation damage by 1-MeV electrons and a possible explanation of the high radiation tolerance of InP solar cells.

Goradia, Chandra↗

Analysis of Back-Contact Interface Recombination in Thin-Film Solar Cells

The open-circuit voltage (VOC) in a generic TCO/buffer/absorber/back-contact thin-film solar cell device is a key parameter in the recombination analysis. In particular, VOC is sensitively influenced by the interface recombination at the buffer/absorber front interface and at the absorber/back-contact interface. This paper reports the temperature, excitation light intensity, and wavelength-dependent open-circuit voltage analysis to separate and quantify recombination rates in solar cells at the front and back interfaces, in the depletion regions, and in the quasi-neutral region. The wavelength-dependent VOC analysis is exploited to extract the absorber/back-contact recombination coefficient. The experimentally observed results are verified using SCAPS-1D (one dimensional-a solar cell capacitance simulator) simulation.

14 SOLAR ENERGY↗

High temperature - low mass solar blanket

Interconnect materials and designs for use with ultrathin silicon solar cells are discussed, as well as the results of an investigation of the applicability of parallel-gap resistance welding for interconnecting these cells. Data relating contact pull strength and cell electrical degradation to variations in welding parameters such as time, voltage and pressure are presented. Methods for bonding ultrathin cells to flexible substances and for bonding thin (75 micrometers) covers to these cells are described. Also, factors influencing fabrication yield and approaches for increasing yield are discussed. The results of vacuum thermal cycling and thermal soak tests on prototype ultrathin cell test coupons and one solar module blanket are presented.

Mesch, H. G.↗

Electron and proton damage on InGaAs solar cells having an InP window layer

As part of a continuing program to determine the space radiation resistance of InP/ln(0.53)Ga(0.47)As tandem solar cells, n/p In(0.53)Ga(0. 47)As solar cells fabricated by RTI were irradiated with 1 MeV electrons and with 3 MeV protons. The cells were grown with a 3 micron n-lnP window layer to mimic the top cell in the tandem cell configuration for both AMO solar absorption and radiation effects. The results have been plotted against 'displacement damage dose' which is the product of the nonionizing energy loss (NIEL) and the particle fluence. A characteristic radiation damage curve can then be obtained for predicting the effect of all particles and energies. AMO, 1 sun solar illumination IV measurements were performed on the irradiated InGaAs solar cells and a characteristic radiation degradation curve was obtained using the solar cell conversion efficiency as the model parameter. Also presented are data comparing the radiation response of both n/p and p/n (fabricated by NREL) InGaAs solar cells as a function of base doping concentration. For the solar cell efficiency, the radiation degradation was found to be independent of the sample polarity for the same base doping concentration.

Messenger, Scott R.↗

Secondary battery management system

A method of managing a battery system, the method including receiving at least one measured characteristic of the at least one battery cell from the at least one sensor, estimating at least one state of the at least one battery cell at a first time by applying an electrochemical-based battery model, estimating at least one physical parameter of the at least one battery cell based on the at least one measured characteristic and the estimation of the at least one state, estimating the at least one state at a second time, subsequent to the first time, by applying the electrochemical-based battery model based on the estimated at least one parameter, and regulating at least one of charging or discharging of the at least one battery cell based on the estimation of the at least one state.

MirTabatabaei, Anahita↗

Secondary battery management system

A method of managing a battery system, the method including receiving at least one measured characteristic of the at least one battery cell from the at least one sensor, estimating at least one state of the at least one battery cell at a first time by applying an electrochemical-based battery model, estimating at least one physical parameter of the at least one battery cell based on the at least one measured characteristic and the estimation of the at least one state, estimating the at least one state at a second time, subsequent to the first time, by applying the electrochemical-based battery model based on the estimated at least one parameter, and regulating at least one of charging or discharging of the at least one battery cell based on the estimation of the at least one state.

25 ENERGY STORAGE↗

A robust plasma-based laser amplifier via stimulated Brillouin scattering

Brillouin amplification in plasma is more resilient to fluctuations in the laser and plasma parameters than Raman amplification, making it an attractive alternative to Raman amplification. In this work, we focus on high plasma densities, n 0 > n cr /4, where stimulated Raman scattering is not possible and laser beam filamentation is the dominant competing process. Through analytic theory and multi-dimensional particle-in-cell simulations, we identify a parameter regime for which Brillouin amplification can be efficient while maintaining filamentation of the probe at a controlled level. We demonstrate pump-to-probe compression ratios of up to 72 and peak amplified probe fluences over 1 kJ cm -2 with ≃50% efficiency. High pulse quality is maintained through control of parasitic filamentation, enabling operation at large beam diameters. Provided the pump and probe pulse diameters can be increased to 1 mm, our results suggest that Brillouin amplification can be used to produce sub-picosecond pulses of petawatt power.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Measurement of material parameters that limit the open-circuit voltage in P-N-junction silicon solar cells

The greatest gains in solar energy conversion efficiency of p-n-junction silicon solar cells come from increasing the open-circuit voltage V sub OC; it is important to understand and characterize the material parameters that limit the V sub OC. Strong experimental evidence exists to support the assertion that either an anomalously large minority carrier charge storage or an anomalously small minority carrier lifetime in the quasi-neutral emitter region limits the open circuit voltage. A method is presented for measuring charge storage and effective lifetime. Static and transient measurements are analyzed using physical models of the solar cell characteristics. This analysis yields the emitter charge storage and life-time, which then can be related to the various physical mechanisms, such as energy band gap shrinkage, that have been proposed earlier as responsible for limiting V sub OC.

Lindholm, F. A.↗

Near-optimum design of GaAs-based concentrator space solar cells for 80 C operation

Using a detailed computer simulation model and reasonable values of optical, geometrical and material parameters from current published literature, parameter optimization studies were performed on two cell geometries, namely, the circular geometry for a Cassegrainian concentrator with 100 AM0, 80 C operation and the rectangular geometry for a venetian blind concentrator with 20 AM0, 80 C operation. For each cell geometry, three cell configurations were considered: p/n AlGaAs/GaAs; n/p AlGaAs/GaAs; and, n/p GaAs shallow homojunction. The studies show the possibility of designing GaAs-based space solar cells with beginning-of-life efficiencies exceeding 22 percent at 20 to 100 AM0, 80 C and probable efficiency degradation of less than 15 percent after a 70 percent reduction in diffusion length in each cell region.

Goradia, C.↗

Luminescence methodology to determine grain-boundary, grain-interior, and surface recombination in thin-film solar cells

We determine the grain-boundary (GB) recombination velocity, S GB , and grain-interior (GI) lifetime, t GI , parameters in superstrate CdS/CdTe thin-film solar cell technology by combining cathodoluminescence (CL) spectrum imaging and time-resolved photoluminescence (TRPL) measurements. We consider critical device formation stages, including after CdTe deposition, CdCl 2 treatment, and Cu diffusion. CL image analysis methods extract GB and GI intensities and grain size for hundreds of grains per sample. Concurrently, a three-dimensional CL model is developed to simulate the GI intensity as a function of t GI , S GB , grain size, and the surface recombination velocity, S surf . TRPL measurements provide an estimate of S surf for the CL model. A fit of GI intensity vs. grain size data with the CL model gives a self-consistent and representative set of S GB and t GI values for the samples: S GB (t GI ) = 2.6 x 10 6 cm/s (68-250 ps), S GB (t GI ) = 4.1 x 10 5 cm/s (1.5-3.3 ns), and S GB (t GI ) = 5.5 x 10 5 cm/s (1.0-3.8 ns) for as-deposited, CdCl 2 -treated, and CdCl 2- A nd Cu-treated samples, respectively. Thus, we find that the CdCl2 treatment both helps to passivate GBs and significantly increase the GI lifetime. Subsequent Cu diffusion increases GB recombination slightly and has nuanced effects on the GI lifetime. Finally, as a partial check on the S GB and t GI values, they are input to a Sentaurus device model, and the simulated performance is compared to the measured performance. The methodology developed here can be applied broadly to CdTe and CdSeTe thin-film technology and to other thin-film solar cell materials including Cu(In 1-x Ga x )Se 2 , Cu 2 ZnSnS 4 , and perovskites.

14 SOLAR ENERGY↗

NiCd battery reliability for shuttle serviced spacecraft

Data from life-cycle testing of 22-cell NiCd batteries designed for shuttle-service spacecrafts are analyzed, first by averaging battery cycle lives as a function of temperature and depth of discharge, and then by calculating single cell failure and survival probabilities as a function of temperature, depth of discharge, and number of operating cycles. The single cell data are used to calculate battery survival probabilities. A mathematical failure model which is a function of the quantity of charge through the battery and the temperature is characterized, suggesting a predictive capability for accurate estimation of energy storage subsystem life and performance of accelerated tests. The failure mechanism described is apparently independent of most charge-discharge parameters and common to most cell sizes.

Eliason, J.↗

Self-Smoothing Anode for Achieving High-Energy Lithium Metal Batteries under Realistic Conditions

Solving the lithium (Li) metal problem is one of the most significant challenges for future high energy batteries. Despite significant efforts to stabilize Li-metal anode structures and prevent dendrite formation, achieving long cycling life in high energy cells remains extremely difficult due to a combination of complex failure modes involving accelerated anode degradation, and depletion of the electrolyte and the Li metal. Here, we report a stable and self-smoothing Li anode structure based on amine-functionalized three-dimensional (3D) carbon fibers for long-cycling life full cells under conditions required for high energy, rechargeable Li-metal batteries. Reversible and smooth Li deposition and stripping is realized on the new anode structure, in contrast with the porous and dendritic Li layers that develop on a pure Li-metal surface. The stable, self-smoothing anode coupled with high-capacity LiNi0.8Mn0.1Co0.1O2 delivers stable cycling using parameters for a high energy cell with a specific energy of more than 380 Wh kg-1, counting all active and inactive components in a single cell, in particular with a high cathode loading, thin Li metal and lean electrolyte. The cycling life of the cell is increased by more than an order of magnitude compared to the cell using a flat Li-metal anode.

Niu, Chaojiang↗

A new titanium-bearing calcium aluminosilicate phase. 2: Crystallography and crystal chemistry of grains formed in slowly cooled melts with bulk compositions of calcium-aluminium-rich inclusions

The crystallography and crystal chemistry of a new calcium- titanium-aluminosilicate mineral (UNK) observed in synthetic analogs to calcium-aluminum-rich inclusions (CAIs) from carbonaceous chondrites was studied by electron diffraction techniques. The unit cell is primitive hexagonal or trigonal, with a = 0.790 +/- 0.02 nm and c = 0.492 +/- 0.002 nm, similar to the lattice parameters of melilite and consistent with cell dimensions for crystals in a mixer furnace slag described by Barber and Agrell (1994). The phase frequently displays an epitactic relationship in which melilite acts as the host, with (0001)(sub UNK) parallel (001)(sub mel) and zone axis group 1 0 -1 0(sub UNK) parallel zone axis group 1 0 0(sub mel). If one of the two space groups determined by Barber and Agrell (1994) for their sample of UNK is applicable (P3m1 or P31m), then the structure is probably characterized by puckered sheets of octahedra and tetrahedra perpendicular to the c-axis with successive sheets coordinated by planar arrays of Ca. In this likely structure, each unit cell contains three Ca sites located in mirror planes, one octahedrally coordinated cation located along a three-fold axis and five tetrahedrally coordinated cations, three in mirrors and two along triads. The octahedron contains Ti but, because there are 1.3-1.9 cations of Ti/formula unit, some of the Ti must also be in tetrahedral coordination, an unusual but not unprecedented situation for a silicate. Tetrahedral sites in mirror planes would contain mostly Si, with lesser amounts of Al while those along the triads correspondingly contain mostly Al with subordinate Ti. The structural formula, therefore, can be expressed as Ca(sub 3)(sup VIII)(Ti,Al)(sup VI)(Al,Ti,Si)(sub 2)(sup IV)(Si,Al)(sub 3)(sup IV)O14 with Si + Ti = 4. Compositions of meteoritic and synthetic Ti-bearing samples of the phase can be described in terms of a binary solid solution between the end-members Ca3TiAl2Si3O14 and Ca3Ti(AlTi)(AlSi2)O14. A Ti-free analog with a formula of Ca3Al2Si4O14 synthesized by Paque et al. (1994) is thought to be related structurally but with the octahedral site being occupied by Al, that is, Ca(sub 3)(sup VIII)Al(sup VI)(Al,Si)(sub 2)(sup IV)(Si)(sub 3)(sup IV)O14.

Barber, David J.↗

Systematic parameter estimation and sensitivity analysis using a multidimensional PEMFC model coupled with DAKOTA.

Current computational models for proton exchange membrane fuel cells (PEMFCs) include a large number of parameters such as boundary conditions, material properties, and numerous parameters used in sub-models for membrane transport, two-phase flow and electrochemistry. In order to successfully use a computational PEMFC model in design and optimization, it is important to identify critical parameters under a wide variety of operating conditions, such as relative humidity, current load, temperature, etc. Moreover, when experimental data is available in the form of polarization curves or local distribution of current and reactant/product species (e.g., O2, H2O concentrations), critical parameters can be estimated in order to enable the model to better fit the data. Sensitivity analysis and parameter estimation are typically performed using manual adjustment of parameters, which is also common in parameter studies. We present work to demonstrate a systematic approach based on using a widely available toolkit developed at Sandia called DAKOTA that supports many kinds of design studies, such as sensitivity analysis as well as optimization and uncertainty quantification. In the present work, we couple a multidimensional PEMFC model (which is being developed, tested and later validated in a joint effort by a team from Penn State Univ. and Sandia National Laboratories) with DAKOTA through the mapping of model parameters to system responses. Using this interface, we demonstrate the efficiency of performing simple parameter studies as well as identifying critical parameters using sensitivity analysis. Finally, we show examples of optimization and parameter estimation using the automated capability in DAKOTA.

30 DIRECT ENERGY CONVERSION↗

Semi-Transparent Perovskite Solar Cells in a Stacked Tandem Module: Cooperative Research and Development Final Report, CRADA Number CRD-19-00810

This project seeks to develop device design, materials composition, and processing tools and parameters to fabricate semi-transparent perovskite solar cells and modules for application in stand-alone products or added to other solar cells in a mechanically stacked tandem configuration. This technology presents significant advanced manufacturing challenges and opportunities in getting to scale, including development of perovskite inks, scalable perovskite and heterojunction deposition and annealing processes, heterojunction composition, transparent electrode composition and deposition process, anti-reflection layer composition and deposition process, and cell to module integration processes. Modification 5: The proposed project seeks to develop device design, materials composition, and processing tools and parameters to fabricate semi-transparent perovskite solar cells and modules for application in stand-alone products or added to other solar cells in a mechanically-stacked tandem configuration. This technology presents significant advanced manufacturing challenges and opportunities in getting to scale, including development of perovskite inks, scalable perovskite and heterojunction deposition and annealing processes, heterojunction composition, transparent electrode composition and deposition process, passivation layers including in module scribes, anti-reflection layer composition and deposition process, and cell to module integration processes. Advanced metrology and characterization will be performed on perovskite films, cells and module. Furthermore, we will examine module or materials recycling for circular economy considerations. Modifcation 6: Gigahertz frequency microwave pump-probe spectroscopies are highly sensitive to thin film semiconductor photoconductivity of individual and stacks of layers that comprise perovskite solar cells. As such, these techniques will be used to qualify reproducibility and quality correlations during the manufacturing process. Modification 7: Mechanical adhesion of top contacts within perovskite modules significantly impacts the durability of the module when exposed to accelerated degradation testing. The adhesion between the perovskite/transport layer interface and the transport layer/top contact interface are both very sensitive small changes in processing. ALD processing conditions of the transport layer will be tuned to optimize the mechanical adhesion within the perovskite module stack.

14 SOLAR ENERGY↗