Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “cable”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,639 records · Page 91
All sourcesNASA NTRSDOE OSTI
NASA NTRS1977

Selected developments in laser wire stripping

The operation of mechanical and thermal strippers and the early development of laser wire strippers are reviewed. NASA sponsored development of laser wire stripping for space shuttle includes bench-type strippers as well as an advanced portable hand-held stripper which incorporates a miniaturized carbon dioxide laser and a rotating optics unit with a gas-jet assist and debris exhaust. Drives and controls girdle the wire and slit the remaining slug without manual assistance. This unit can strip wire sizes 26 through 12 gage. A larger-capacity hand-held unit for wire sizes through 1/0 gage was built using a neodynium-doped yttrium aluminum garnet (Nd:YAG) laser. The hand-held units have a flexible umbilical cable to an accompanying cart that carries the power supply, gas supply, cooling unit, and the controls.

Source record↗
NASA NTRS1977

A space necklace about the earth

A space elevator is forecasted for the first quarter of the 21st century, that will consist of a cable attached at the earth's equator, suspended in space by an artificial satellite in geosynchronous orbit. It is stated that such a transport system will supplement rockets as the railway supplements aircraft. Specific aspects of the system are examined, including provisions for artificial gravity, the development special composite construction materials exhibiting high strength and low mass, and spacecraft launching from the elevator.

Polyakov, G.↗
NASA NTRS1978

Baykonur

The 'Baykonur' cosmodrome, its functions, operations, and services are described in considerable detail. The launch complex, launching pads, launch structures, launchers with cable masts and propellant loading towers, are included. The sequence of all phases of rocket assembly and preparations for launch are depicted. Prelaunch procedures and the launch itself are described.

Vladimirov, B. P.↗
NASA NTRS1978

Low loss, flexible, lightweight corporate RF feed system for SAR antenna application

Mechanical and electrical efficiency constraints imposed by the SEASAT-A synthetic aperture radar antenna posed difficult design problems. After consideration of available standard cable and waveguide systems, it was determined that an optimum design could be obtained from a suspended substrate RF feed system. Size and mechanical flexibility constraints forced the design of a flexible, suspended substrate section capable of 180-degree flexure. Original design goal for insertion loss over power division was 1 db; measured results indicated 0.6 db maximum across the band. Multipactor testing of system components indicated system breakdown capability in excess of 4 kW compared to a specification input maximum of 1500 W.

Schiavone, F.↗
NASA NTRS1978

In orbit manufacture of solar reflector satellites

The implementation of an idea reported by Oberth (1929) is discussed. This idea is concerned with the reflection of sunlight to the ground by means of orbiting metal mirrors. The approach used for implementing Oberth's idea makes use of aluminized Mylar as a reflecting material which is supported with the aid of a structure which includes six booms and a peripheral mirror cable. Four low resistance one turn coils are formed by the structure. Magnetic forces for attitude maneuvers are obtained by energizing the coils. A bipropellant propulsion system is to be used to raise the initial 330 km circular parking orbit to a 330 by 1000 km elliptic orbit. Two thrusters are employed. They are oriented parallel to each other and the mirror surface. The mirror satellite can be completely folded so as to maximize the launch capability of the Shuttle.

Muller, R. M.↗
NASA NTRS1979

Antenna deployment mechanism

All-mechanical antenna deployment system operates by single cable tensioned by electrically driven drum. Device is comprised of set of pulleys fixed to telescoping antenna mast, ratchet which prevents premature antenna retraction, and special latch which holds antenna in retracted position.

Griffin, C. R.↗
NASA NTRS1980

Measuring signal-to-noise ratio automatically

Automated method of measuring signal-to-noise ratio in digital communication channels is more precise and 100 times faster than previous methods used. Method based on bit-error-rate (B&R) measurement can be used with cable, microwave radio, or optical links.

Bergman, L. A.↗
NASA NTRS1980

Fiber-optic proximity sensor

Proximity sensor for mechanical hand of remote manipulator incorporates fiber optics to conduct signals between light source and light detector. Fiber optics are not prone to noise from electromagnetic interference and radio-frequency interference as are sensors using long electrical cables.

Bejczy, A. K.↗
NASA NTRS1978

Post LANDSAT D advanced concept evaluation

Preliminary results of a past LANDSAT D advanced concept evaluation study to forecast and identify key technologies required for earth resources satellite systems in the 1985 to 2000 time period are presented. Mission categories discussed include agriculture, range management, forestry, geological resources, land use, water resources, environmental quality, and disaster assessment. Sensor and system concepts are described for a passive L-band radiometer (microsat), a texturometer to measure ground surface texture, and a ferris wheel radar configuration that relies on cable tension for support.

Flatow, F. S.↗
NASA NTRS1978

Vehicular impact absorption system

An improved vehicular impact absorption system characterized by a plurality of aligned crash cushions of substantially cubic configuration is described. Each consists of a plurality of voided aluminum beverage cans arranged in substantial parallelism within a plurality of superimposed tiers and a covering envelope formed of metal hardware cloth. A plurality of cables is extended through the cushions in substantial parallelism with an axis of alignment for the cushions adapted to be anchored at each of the opposite end thereof.

Knoell, A. C.↗
NASA NTRS1978

Remote lightning monitor system

An apparatus for monitoring, analyzing and accurately determining the value of peak current, the peak rate of change in current with respect to time and the rise time of the electrical currents generated in an electrical conductive mast that is located in the vicinity where lightning is to be monitored is described. The apparatus includes an electrical coil for sensing the change in current flowing through the mast and generating a voltage responsive. An on-site recorder and a recorder control system records the voltages produced responsive to lightning strikes and converts the voltage to digital signals for being transmitted back to the remote command station responsive to command signals. The recorder and the recorder control system are carried within an RFI proof environmental housing into which the command signals are fed by means of a fiber optic cable so as to minimize electrical interference.

Lennon, C. L.↗
NASA NTRS1978

Automatic phase control in solar power satellite systems

Various approaches to the problem of generating, maintaining and distributing a coherent, reference phase signal over a large area are suggested, mathematically modeled and analyzed with respect to their ability to minimize: phase build-up, beam diffusion and beam steering phase jitter, cable length, and maximize power transfer efficiency. In addition, phase control configurations are suggested which alleviate the need for layout symmetry.

Lindsey, W. C.↗
NASA NTRS1978

An electro-optic, high-voltage, transient probe

A newly developed electro-optic voltage transducer is described. It is capable of measuring 30 ns rise time, floating or single-ended, 0 to 20 kV transients in a high noise environment such as a fast discharge laser or energetic switch system. The voltage transient is detected by a specially developed resistor in series with a light emitting diode. The light output (proportional to voltage) is transmitted remotely via a fiber-optic cable to a detector and recorder. Typical signals and comparison with commercial probe system signals are described.

Posta, S. J.↗
NASA NTRS1978

Test procedures

The test procedures required to evaluate the performance of the Space Lab Bus Interface Unit (SL/BIU) are described. This level of testing involves the design evaluation of signal levels, timing, and signal-to-noise (S/N) performance. The tests are to be comprehensive in order to provide data on the operational characteristics of the SL/BIU. The evluation tests are designed to accomplish the following determinations as a minimum for component level testing of the SL/BIU: (1) the baseline operation parameters for comparison to ICD 2-05301 requirements; (2) the influence of serial data line parameter variation on the operation of SL/BIU; (3) the effects of noise on discrete and serial data lines (S/N ratio); and (4) the effects of cable length variation.

Source record↗
NASA NTRS1978

Sun tracking solar energy collector

A parabolic reflector is supported so that it can track the sun. The support for this reflector comprises an azimuth frame supported on two wheels and a central pivotal point which are positioned in a substantially triangular configuration. On top of the azimuth frame, there is provided an elevation frame. The reflector rides on wheels captured within curved rails. The wheels of the azimuth frame are driven by an azimuth actuator. The reflector structure is counterbalanced about its elevation axis by a pendulum cable system which is driven by a motor. At the focal point of the parabolic reflector, a heat engine or receiver is mounted independently on the reflector. Suitable means are provided for moving the reflector about its two axes.

Perkins, G. S.↗
NASA NTRS1977

Two measures of performance in a peg-in-hole manipulation task with force feedback

The results are described from two manipulators on a peg-in-hole task, which is part of a continued effort to develop models for human performance with remote manipulators. Task difficulty is varied by changing the diameter of the peg to be inserted in a 50 mm diameter hole. An automatic measuring system records the distance between the tool being held by the manipulator and the receptacle into which it is to be inserted. The data from repeated insertions are processed by computer to determine task times, accumulated distances, and trajectories. Experiments with both the MA-11 cable-connected master-slave manipulator common to hot cell work and the MA-23 servo-controlled manipulator (with and without force feedback) are described. Comparison of these results with previous results of the Ames Manipulator shows that force feedback provides a consistent advantage.

Hill, J. W.↗
NASA NTRS1979

FTS maintenance and calibration at DSS 42/43

An FTS maintenance and calibration task was conducted at DSS 42/43 during August 1978. The objectives of this effort were (1) the routine maintenance and calibration of hydrogen masers, (2) installation and calibration of cesium standards, (3) installation of test equipment for frequency measurement, (4) CRG testing, (5) cabling inspection and repair, (6) check thermal and magnetic environment of H-maser/cesium room, and (7) calibration of frequency and timing subsystem.

Dachel, P. R.↗
NASA NTRS1979

Active Antenna for the VLF to HF Observer

A simple and low cost method of fabricating an active antenna preamplifier system covering the range of 10 KHz to 10 MHz for use with tunable communications receivers is described. The same type of system can be used with airborne VLF navigation receivers. By operating a high impedance preamplifier as a wide band device directly at the base of a short vertical antenna, the signal can be driven back to the receiver on a length of coaxial cable. The antenna can be as short as I meter and still give excellent results when the capacity to ground at the antenna is low.

Burhans, R. W.↗