SEARCH · Engineering Papers

Results for “Yield function”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,639 records · Page 91

All sources NASA NTRS DOE OSTI

NASA NTRS1989

Theoretical predictions of volatile bearing phases and volatile resources in some carbonaceous chondrites

Carbonaceous chondrites are usually believed to be the primary constituents of near-Earth asteroids and Phobos and Diemos, and are potential resources of fuels which may be exploited for future planetary missions. The nature and abundances are calculated of the major volatile bearing and other phases, including the vapor phase that should form in C1 and C2 type carbonaceous chondrites as functions of pressure and temperature. The results suggest that talc, antigorite plus or minus magnesite are the major volatile bearing phases and are stable below 400 C at 1 bar in these chondritic compositions. Simulated heating of a kilogram of C2 chondrite at fixed bulk composition between 400 and 800 C at 1 bar yields about 135 gm of volatile, which is made primarily of H2O, H2, CH4, CO2 and CO. The relative abundances of these volatile species change as functions of temperature, and on a molar basis, H2 becomes the most dominant species above 500 C. In contrast, Cl chondrites yield about 306 gm of volatile under the same condition, which consist almost completely of 60 wt percent H2O and 40 wt percent CO2. Preliminary kinetic considerations suggest that equilibrium dehydration of hydrous phyllosilicates should be attainable within a few hours at 600 C. These results provide the framework for further analyses of the volatile and economic resource potentials of carbonaceous chondrites.

Ganguly, Jibamitra↗

DOE OSTI2019

Diverse Bilayer Morphologies Achieved via α-Helix-to-β-Sheet Transitions in a Short Amphiphilic Peptide

Transmembrane proteins are functional macromolecules that direct the flow of small molecules and ions across a lipid bilayer. Here, we propose the development of helical peptide amphiphiles that will serve as both the bilayer and the functional unit of a self-assembled peptide bilayer membrane. The peptide, K 3 L 12 , was designed not only to possess dimensions similar to that of a lipid bilayer but also to yield a structurally robust, alpha-helical bilayer. The formation of alpha-helices is pH-dependent, and upon annealing the sample, a transition from alpha-helices to $\beta$-sheets can be controlled, as indicated by optical and vibrational spectroscopies. Imaging the materials confirms morphologies similar to that of a lipid bilayer but rich in $\alpha$-helices. Annealing the samples yields a shift in the morphology from bilayers to curled disks, fibers, and sheets. The structural robustness of the material can facilitate the incorporation of many functions into the bilayer assembly.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

NASA NTRS1989

Online submicron particle sizing by dynamic light scattering using autodilution

Efficient production of a wide range of commercial products based on submicron colloidal dispersions would benefit from instrumentation for online particle sizing, permitting real time monitoring and control of the particle size distribution. Recent advances in the technology of dynamic light scattering (DLS), especially improvements in algorithms for inversion of the intensity autocorrelation function, have made it ideally suited to the measurement of simple particle size distributions in the difficult submicron region. Crucial to the success of an online DSL based instrument is a simple mechanism for automatically sampling and diluting the starting concentrated sample suspension, yielding a final concentration which is optimal for the light scattering measurement. A proprietary method and apparatus was developed for performing this function, designed to be used with a DLS based particle sizing instrument. A PC/AT computer is used as a smart controller for the valves in the sampler diluter, as well as an input-output communicator, video display and data storage device. Quantitative results are presented for a latex suspension and an oil-in-water emulsion.

Nicoli, David F.↗

DOE OSTI2020

SNPeffect: identifying functional roles of SNPs using metabolic networks

Genetic sources of phenotypic variation have been a focus of plant studies aimed at improving agricultural yield and understanding adaptive processes. Genome-wide association studies identify the genetic background behind a trait by examining associations between phenotypes and single-nucleotide polymorphisms (SNPs). Although such studies are common, biological interpretation of the results remains a challenge; especially due to the confounding nature of population structure and the systematic biases thus introduced. Here, we propose a complementary analysis (SNPeffect) that offers putative genotype-to-phenotype mechanistic interpretations by integrating biochemical knowledge encoded in metabolic models. SNPeffect is used to explain differential growth rate and metabolite accumulation in A. thaliana and P. trichocarpa accessions as the outcome of SNPs in enzyme-coding genes. To this end, we also constructed a genome-scale metabolic model for Populus trichocarpa, the first for a perennial woody tree. As expected, our results indicate that growth is a complex polygenic trait governed by carbon and energy partitioning. The predicted set of functional SNPs in both species are associated with experimentally characterized growth-determining genes and also suggest putative ones. Functional SNPs were found in pathways such as amino acid metabolism, nucleotide biosynthesis, and cellulose and lignin biosynthesis, in line with breeding strategies that target pathways governing carbon and energy partition.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2018

Quantum Chemical Calculation of p K a s of Environmentally Relevant Functional Groups: Carboxylic Acids, Amines, and Thiols in Aqueous Solution

Developing accurate quantum chemical approaches for calculating p K a s is of broad interest. Useful accuracy can be obtained by using density functional theory (DFT) in combination with a polarizable continuum solvent model. However, some classes of molecules present problems for this approach, yielding errors greater than 5 p K units. Various methods have been developed to improve the accuracy of the combined strategy. These methods perform well but either do not generalize or introduce additional degrees of freedom, increasing the computational cost. The Solvation Model based on Density (SMD) has emerged as one of the most commonly used continuum solvent models. Nevertheless, for some classes of organic compounds, e.g., thiols, the p K a s calculated with the original SMD model show errors of 6–10 p K units, and we traced these errors to inaccuracies in the solvation free energies of the anions. To improve the accuracy of p K a s calculated with DFT and the SMD model, we developed a scaled solvent-accessible surface approach for constructing the solute–solvent boundary. By using a “direct” approach, in which all quantities are computed in the presence of the continuum solvent, the use of thermodynamic cycles is avoided. Furthermore, no explicit water molecules are required. Three benchmark data sets of experimentally measured p K a values, including 28 carboxylic acids, 10 aliphatic amines, and 45 thiols, were used to assess the optimized SMD model, which we call SMD with a scaled solvent-accessible surface (SMD sSAS ). Of the methods tested, the M06-2X density functional approximation, 6-31+G(d,p) basis set, and SMD sSAS solvent model provided the most accurate p K a s for each set, yielding mean unsigned errors of 0.9, 0.4, and 0.5 p K units, respectively, for carboxylic acids, aliphatic amines, and thiols. As a result, this approach is therefore useful for efficiently calculating the p K a s of environmentally relevant functional groups.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

NASA NTRS2015

Performance of a Discrete Wavelet Transform for Compressing Plasma Count Data and its Application to the Fast Plasma Investigation on NASA's Magnetospheric Multiscale Mission

Plasma measurements in space are becoming increasingly faster, higher resolution, and distributed over multiple instruments. As raw data generation rates can exceed available data transfer bandwidth, data compression is becoming a critical design component. Data compression has been a staple of imaging instruments for years, but only recently have plasma measurement designers become interested in high performance data compression. Missions will often use a simple lossless compression technique yielding compression ratios of approximately 2:1, however future missions may require compression ratios upwards of 10:1. This study aims to explore how a Discrete Wavelet Transform combined with a Bit Plane Encoder (DWT/BPE), implemented via a CCSDS standard, can be used effectively to compress count information common to plasma measurements to high compression ratios while maintaining little or no compression error. The compression ASIC used for the Fast Plasma Investigation (FPI) on board the Magnetospheric Multiscale mission (MMS) is used for this study. Plasma count data from multiple sources is examined: resampled data from previous missions, randomly generated data from distribution functions, and simulations of expected regimes. These are run through the compression routines with various parameters to yield the greatest possible compression ratio while maintaining little or no error, the latter indicates that fully lossless compression is obtained. Finally, recommendations are made for future missions as to what can be achieved when compressing plasma count data and how best to do so.

Particles↗

DOE OSTI2020

Real-time coupled-cluster approach for the cumulant Green's function

Green’s function methods within many-body perturbation theory provide a general framework for treating electronic correlations in excited states. Here we investigate the cumulant form of the one-electron Green’s function based on the coupled-cluster equation of motion approach in an extension of our previous study. The approach yields a non-perturbative expression for the cumulant in terms of the solution to a set of coupled first order, non-linear differential equations. The method thereby adds non-linear corrections to traditional cumulant methods linear in the self energy. The approach is applied to the core-hole Green’s function and illustrated for a number of small molecular systems. For these systems we find that the non-linear contributions lead to significant improvements both for quasiparticle properties such as core-level binding energies, as well as the satellites corresponding to inelastic losses observed in photoemission spectra.

Vila, Fernando D.↗

DOE OSTI2015

Path optimization by a variational reaction coordinate method. I. Development of formalism and algorithms

The development of algorithms to optimize reaction pathways between reactants and products is an active area of study. Existing algorithms typically describe the path as a discrete series of images (chain of states) which are moved downhill toward the path, using various reparameterization schemes, constraints, or fictitious forces to maintain a uniform description of the reaction path. The Variational Reaction Coordinate (VRC) method is a novel approach that finds the reaction path by minimizing the variational reaction energy (VRE) of Quapp and Bofill. The VRE is the line integral of the gradient norm along a path between reactants and products and minimization of VRE has been shown to yield the steepest descent reaction path. In the VRC method, we represent the reaction path by a linear expansion in a set of continuous basis functions and find the optimized path by minimizing the VRE with respect to the linear expansion coefficients. Improved convergence is obtained by applying constraints to the spacing of the basis functions and coupling the minimization of the VRE to the minimization of one or more points along the path that correspond to intermediates and transition states. The VRC method is demonstrated by optimizing the reaction path for the Müller-Brown surface and by finding a reaction path passing through 5 transition states and 4 intermediates for a 10 atom Lennard-Jones cluster.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

NASA NTRS2014

Modeling Sound Propagation Through Non-Axisymmetric Jets

A method for computing the far-field adjoint Green's function of the generalized acoustic analogy equations under a locally parallel mean flow approximation is presented. The method is based on expanding the mean-flow-dependent coefficients in the governing equation and the scalar Green's function in truncated Fourier series in the azimuthal direction and a finite difference approximation in the radial direction in circular cylindrical coordinates. The combined spectral/finite difference method yields a highly banded system of algebraic equations that can be efficiently solved using a standard sparse system solver. The method is applied to test cases, with mean flow specified by analytical functions, corresponding to two noise reduction concepts of current interest: the offset jet and the fluid shield. Sample results for the Green's function are given for these two test cases and recommendations made as to the use of the method as part of a RANS-based jet noise prediction code.

Leib, Stewart J.↗

DOE OSTI2019

Europium concentration effects on the scintillation properties of Cs 4 SrI 6 :Eu and Cs 4 CaI 6 :Eu single crystals for use in gamma spectroscopy

Recently discovered scintillators Cs 4 SrI 6 :Eu and Cs 4 CaI 6 :Eu have shown promising properties for gamma-ray detection in homeland security applications, with <4% energy resolution (at 662 keV) and light yields above 50,000 ph/MeV. However, a thorough investigation of the effects of europium concentration has not yet been conducted. In this work, Eu 2+ concentration was varied from 0.5 mol% to 9 mol%, and Ø7 mm single crystals were grown from the melt via the vertical Bridgman method. Scintillation performance was evaluated as a function of Eu 2+ concentration to determine the optimal amount. The observed trend was improved energy resolution and higher light yield with increasing Eu 2+ concentration up to 7 mol%. The best energy resolution achieved was 3.2% for Cs 4 SrI 6 :Eu 7% and 3.6% for Cs 4 CaI 6 :Eu 7%. Their respective light yields were 71,000 ph/MeV and 69,000 ph/MeV.

36 MATERIALS SCIENCE↗

NASA NTRS1976

Planetary spectra for anisotropic scattering

Some effects on planetary spectra that would be produced by departures from isotropic scattering are examined. The phase function is the simplest departure to handle analytically and the only phase function, other than the isotropic one, that can be incorporated into a Chandrasekhar first approximation. This approach has the advantage of illustrating effects resulting from anisotropies while retaining the simplicity that yields analytic solutions. The curve of growth is the sine qua non of planetary spectroscopy. The discussion emphasizes the difficulties and importance of ascertaining curves of growth as functions of observing geometry. A plea is made to observers to analyze their empirical curves of growth, whenever it seems feasible, in terms of coefficients of which are the leading terms in radiative-transfer analysis. An algebraic solution to the two sets of anisotropic H functions is developed which gives emergent intensities accurate to 0.3%.

Chamberlain, J. W.↗

DOE OSTI2016

The roles of 4f- and 5f-orbitals in bonding: A magnetochemical, crystal field, density functional theory, and multi-reference wavefunction study

The electronic structures of 4f 3 /5f 3 Cp" 3 M and Cp" 3 M·alkylisocyanide complexes, where Cp" is 1,3-bis-(trimethylsilyl)cyclopentadienyl, are explored with a focus on the splitting of the f-orbitals, which provides information about the strengths of the metal–ligand interactions. While the f-orbital splitting in many lanthanide complexes has been reported in detail, experimental determination of the f-orbital splitting in actinide complexes remains rare in systems other than halide and oxide compounds, since the experimental approach, crystal field analysis, is generally significantly more difficult for actinide complexes than for lanthanide complexes. In this study, a set of analogous neodymium(III) and uranium(III) tris-cyclopentadienyl complexes and their isocyanide adducts was characterized by electron paramagnetic resonance (EPR) spectroscopy and magnetic susceptibility. The crystal field model was parameterized by combined fitting of EPR and susceptibility data, yielding an accurate description of f-orbital splitting. The isocyanide derivatives were also studied using density functional theory, resulting in f-orbital splitting that is consistent with crystal field fitting, and by multi-reference wavefunction calculations that support the electronic structure analysis derived from the crystal-field calculations. The results highlight that the 5f-orbitals, but not the 4f-orbitals, are significantly involved in bonding to the isocyanide ligands. The main interaction between isocyanide ligand and the metal center is a σ-bond, with additional 5f to π* donation for the uranium complexes. As a result, while interaction with the isocyanide π*-orbitals lowers the energies of the 5f xz 2 and 5f yz 2- orbitals, spin–orbit coupling greatly reduces the population of 5f xz 2 and 5f yz 2 in the ground state.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2015

SU-C-204-01: A Fast Analytical Approach for Prompt Gamma and PET Predictions in a TPS for Proton Range Verification

Purpose: We describe and demonstrate a fast analytical tool for prompt-gamma emission prediction based on filter functions applied on the depth dose profile. We present the implementation in a treatment planning system (TPS) of the same algorithm for positron emitter distributions. Methods: The prediction of the desired observable is based on the convolution of filter functions with the depth dose profile. For both prompt-gammas and positron emitters, the results of Monte Carlo simulations (MC) are compared with those of the analytical tool. For prompt-gamma emission from inelastic proton-induced reactions, homogeneous and inhomogeneous phantoms alongside with patient data are used as irradiation targets of mono-energetic proton pencil beams. The accuracy of the tool is assessed in terms of the shape of the analytically calculated depth profiles and their absolute yields, compared to MC. For the positron emitters, the method is implemented in a research RayStation TPS and compared to MC predictions. Digital phantoms and patient data are used and positron emitter spatial density distributions are analyzed. Results: Calculated prompt-gamma profiles agree with MC within 3 % in terms of absolute yield and reproduce the correct shape. Based on an arbitrary reference material and by means of 6 filter functions (one per chemical element), profiles in any other material composed of those elements can be predicted. The TPS implemented algorithm is accurate enough to enable, via the analytically calculated positron emitters profiles, detection of range differences between the TPS and MC with errors of the order of 1–2 mm. Conclusion: The proposed analytical method predicts prompt-gamma and positron emitter profiles which generally agree with the distributions obtained by a full MC. The implementation of the tool in a TPS shows that reliable profiles can be obtained directly from the dose calculated by the TPS, without the need of full MC simulation.

60 APPLIED LIFE SCIENCES↗

DOE OSTI2020

Impacts of nitrogen addition on switchgrass root-associated diazotrophic community structure and function

ABSTRACT Cellulosic bioenergy crops, like switchgrass (Panicum virgatum), have potential for growth on lands unsuitable for food production coupled with potential for climate mitigation. Sustainability of these systems lies in identifying conditions that promote high biomass yields on marginal lands under low-input agricultural practices. Associative nitrogen fixation (ANF) is a potentially important nitrogen (N) source for these crops, yet ANF contributions to plant N, especially under fertilizer N addition are unclear. In this study, we assess structure (nifH) and function (ANF) of switchgrass root-associated diazotrophic communities to long-term and short-term N additions using soil from three marginal land sites. ANF rates were variable and often unexpectedly high, sometimes 10× greater than reported in the literature, and did not respond in repeatable ways to long-term or short-term N. We found few impacts of N addition on root-associated diazotrophic community structure or membership. Instead, we found a very consistent root-associated diazotrophic community even though switchgrass seeds were germinated in soil from field sites with distinct diazotrophic communities. Ultimately, this work demonstrates that root-associated diazotrophic communities have the potential to contribute to switchgrass N demands, independent of N addition, and this may be driven by selection of the diazotrophic community by switchgrass roots.

Microbiology↗

DOE OSTI2018

Convergence and Efficiency of Adaptive Importance Sampling Techniques with Partial Biasing

We propose a new Monte Carlo method to efficiently sample a multimodal distribution (known up to a normalization constant). We consider a generalization of the discrete-time Self Healing Umbrella Sampling method, which can also be seen as a generalization of well-tempered metadynamics. The dynamics is based on an adaptive importance technique. The importance function relies on the weights (namely the relative probabilities) of disjoint sets which form a partition of the space. These weights are unknown but are learnt on the fly yielding an adaptive algorithm. In the context of computational statistical physics, the logarithm of these weights is, up to an additive constant, the free-energy, and the discrete valued function defining the partition is called the collective variable. The algorithm falls into the general class of Wang–Landau type methods, and is a generalization of the original Self Healing Umbrella Sampling method in two ways: (i) the updating strategy leads to a larger penalization strength of already visited sets in order to escape more quickly from metastable states, and (ii) the target distribution is biased using only a fraction of the free-energy, in order to increase the effective sample size and reduce the variance of importance sampling estimators. We prove the convergence of the algorithm and analyze numerically its efficiency on a toy example.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

DOE OSTI2016

Random phase approximation with second-order screened exchange for current-carrying atomic states

The direct random phase approximation (RPA) and RPA with second-order screened exchange (SOSEX) have been implemented with complex orbitals as a basis for treating open-shell atoms. Both RPA and RPA+SOSEX are natural implicit current density functionals because the paramagnetic current density implicitly is included through the use of complex orbitals. We confirm that inclusion of the SOSEX correction improves the total energy accuracy substantially compared to RPA, especially for smaller-Z atoms. Computational complexity makes post self-consistent-field (post-SCF) evaluation of RPA-type expressions commonplace, so orbital basis origins and properties become important. Sizable differences are found in correlation energies, total atomic energies, and ionization energies for RPA-type functionals evaluated in the post-SCF fashion with orbital sets obtained from different schemes. Reference orbitals from Kohn-Sham calculations with semi-local functionals are more suitable for RPA+SOSEX to generate accurate total energies, but reference orbitals from exact exchange (non-local) yield essentially energetically degenerate open-shell atom ground states. RPA+SOSEX correlation combined with exact exchange calculated from a hybrid reference orbital set (half the exchange calculated from exact-exchange orbitals, the other half of the exchange from orbitals optimized for the Perdew-Burke-Ernzerhof (PBE) exchange functional) gives the best overall performance. Finally, numerical results show that the RPA-like functional with SOSEX correction can be used as a practical implicit current density functional when current effects should be included.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2015

Transcription yield of fully 2'-modified RNA can be increased by the addition of thermostabilizing mutations to T7 RNA polymerase mutants

On average, mutations are deleterious to proteins. Mutations conferring new function to a protein often come at the expense of protein folding or stability, reducing overall activity. Over the years, a panel of T7 RNA polymerases have been designed or evolved to accept nucleotides with modified ribose moieties. These modified RNAs have proven useful, especially in vivo, but the transcriptional yields tend to be quite low. Here we show that mutations previously shown to increase the thermal tolerance of T7 RNA polymerase can increase the activity of mutants with expanded substrate range. The resulting polymerase mutants can be used to generate 2'-O-methyl modified RNA with yields much higher than enzymes currently employed.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2025

RNA–Polymer Conjugates via Direct Incorporation of the Chain Transfer Agent and PET–RAFT Polymerization

Covalent conjugation of RNA with synthetic polymers has emerged as a powerful approach for creating bioconjugates with synergistically enhanced properties. However, conventional methods require solid-phase synthesis to preinstall functional groups in RNA, significantly limiting practical applications. Here, we present a novel approach for synthesizing RNA–polymer conjugates via direct incorporation of chain transfer agent (CTA) into RNA through acylation chemistry and reversible addition–fragmentation chain transfer (RAFT) polymerization. A CTA-functionalized acyl imidazole reagent was synthesized to facilitate direct and covalent modification of various RNAs by reacting with their 2′-hydroxyl groups. Subsequent RAFT polymerization using RNA–CTA as a macro-CTA enabled direct grafting-from RNA, yielding RNA conjugates with controlled molecular weight and low dispersity. Notably, this postsynthetic modification strategy was successfully extended to modify biomass RNA, yielding thermoresponsive conjugates and biodegradable hydrogels. Overall, this advance allowed for the direct modification of synthetic and biomass RNAs, significantly enhancing the accessibility of functional RNA–polymer materials.

biomass↗