Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “WHITE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,639 records · Page 91
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Sodium-Cooled Fast Reactor Proliferation Resistance and Physical Protection White Paper

The Sodium-Cooled Fast Reactor (SFR) system was identified during the Generation IV Technology Roadmap as a promising technology to perform the actinide management mission and, if enhanced economics for the system could be realized, also the electricity and heat production missions. The main characteristics of the SFR that make it especially suitable for the actinide management mission are: Consumption of transuranics in a closed fuel cycle, thus reducing the radiotoxicity and heat load which facilitates waste disposal and geologic isolation; Enhanced utilization of uranium resources through efficient management of fissile materials and multi-recycle; and, High level of safety achieved through inherent and passive means that accommodate transients and bounding events with significant safety margins.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2020

MSR Proliferation Resistance and Physical Protection White Paper

Molten Salt Reactors (MSRs) have seen a resurgence of interest in the past decade around the world. Support for these activities is provided from both national and private sources. The largest difference from the 2011 GIF MSR PR&PP evaluation consequently is the transition from evaluating academic systems focused on exploring the technical potential of MSRs to those of companies and countries focusing on near-term deployment. A wide variety of designs currently exist ranging from solid to liquid-fueled designs, with salt processing on-site or off-site, and a variety of fuel choices. As such, the proliferation resistance and physical protection aspects will have significantly more variation depending on reactor design than the other advanced reactors. The rapid introduction and evolution of innovative MSR designs inevitably means that technology specific details of overview reports, such as this one, become rapidly outdated. Consequently, this report focuses on essential features required for any MSR rather than specific design aspects.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2018

Rediscovering the Economics of Nuclear Power. White paper

Energy policy can often be narrow and take a short-term view as well as beholden to public opinion as demonstrated by the early decommissioning of nuclear power plants (NPPs) in Germany and Belgium after the Fukushima Daiichi event. The subsequent pursuit of renewable electric power generating capacity should not lose sight of the value of technological diversity in an energy portfolio. Domestic market incentives have failed to maintain the U.S.'s technological diversity as demonstrated by the dwindling state of the nuclear power industry. The nuclear power industry faces many challenges, such as aging infrastructure, policy driven production disincentives, and licensing delays, which leave the nuclear power industry at a cross roads. However, there is an opportunity to identify both a socially beneficial technology mix which includes NPPs and corresponding strategies for retaining NPPs in the U.S. energy portfolio. This paper proposes three technical approach options to identify strategies to assist NPPs that will hopefully prove publicly unobtrusive, economically affordable, and potentially profitable.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2019

Stable White Organic Light-emitting Diodes Enabled by New Materials with Reduced Excited State Lifetime (Final Report)

The Georgia Institute of Technology assembled a multidisciplinary team with complementary expertise in the areas of multi-level molecular simulations (Brédas), chemical synthesis and material characterization (Marder), and device physics and engineering (Kippelen). The team engaged in a two-year integrated theoretical and experimental program to develop blue-emissive layers that can yield simultaneously near 100% internal quantum efficiency (IQE) and short excited-state lifetimes to overcome the existing efficiency vs. stability tradeoff displayed by blue-emitting OLEDs and by WOLEDs, and to demonstrate stable WOLEDs that fulfill or exceed the 2020 target metrics (RDP 2016 section C.1.2) ahead of schedule. In this program, we investigated two general approaches involving the development of wide-bandgap ambipolar hosts with a low ΔEST. Ambipolar host achieved by intermolecular through-space D:A interactions and by intramolecular through-bond interactions between covalently linked D and A segments. Novel hosts were incorporated in to blue-emissive layers (EML) by combining them with suitable fluorescent guest emitters having high quantum yields of emission (Φem) to demonstrate blue-emitting OLEDs with high EQE and low roll-off. This final report describes the most important results achieved during this program

36 MATERIALS SCIENCE↗
DOE OSTI2019

Tuning Singlet and Triplet Excited State Energies and Frontier Orbitals of Imidazole Host/Emitter for Hybrid White OLEDs

In this work, we report hybrid fluorescent/phosphorescent WOLEDs employing blue fluorescent and green and red phosphorescent emitters doped into a host matrix. The fluorescent emitting dopant harnesses all electrically generated high energy singlet excitons for blue emission, and the phosphorescent dopants harvest the remainder of lower-energy triplet excitons for green and red emission. This design requires the singlet state (S1) of the host to be higher than the S1 of the fluorescent dopant so that the singlet excitons generated on the host are transferred to the fluorescent dopant. Furthermore, the triplet state (T1) of the host matrix should be lower than the T1 of the fluorescent dopant so the triplet excitons generated on the fluorescent dopant can be transferred to the host matrix which will then be transferred to the green and red phosphors. To develop a host material that can serve this purpose, we tune the electronic properties of phenanthro[9,10-d]imidazole by incorporating phenyl and/or pyridyl moieties at the N1 and C2 positions of phenanthro[9,10-d]imidazole. This substitution resulted in variety of host materials with different singlet/triplet energies, quantum efficiency and redox values. The resulting phenanthro[9,10-d]imidazoles are employed as host materials for fluorescent and phosphorescent dopants and as neat fluorescent emitters. Monochromatic devices with a fluorescent emitter and the phenanthro[9,10-d]imidazoles as host materials or as neat fluorescent emitter achieved near theoretical maximum efficiency. Finally, efficient three-color hybrid WOLEDs were fabricated using the phenanthro[9,10-d]imidazoles as hosts for a fluorescent dopant or as neat fluorescent emitters and host for green and red phosphors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Rapid Quality Assessment in Additive Manufacturing: New Procedure Accelerates Build Quality Assessment. White paper

Accelerated growth of the additive manufacturing (AM) industry in recent years is accompanied by a rising need for methods to quickly assess quality at-scale. Current practices for quality inspection include nondestructive test methods and destructive testing of witness coupons, which are artifacts built alongside the actual part. However, these methods can be costly and time-consuming. Recognizing this need, the Additive Manufacturing Center of Excellence (AM CoE) initiated a project led by its partner, Auburn University, to develop rapid testing procedure using asbuilt samples tested in torsion to quantitatively assess build quality. The presented work developed a rapid testing procedure using as-built samples tested in torsion to quantify small variances for assessing build quality.

42 ENGINEERING↗
DOE OSTI2020

Considerations for a New Solution Reactor for Nuclear Criticality Safety Applications-a White Paper

This document presents considerations for a new solution reactor as noted in the United States (US) Department of Energy (DOE) Nuclear Criticality Safety Program (NCSP) Five Year Plan. The solution reactor tasking is noted in collaboration with the French Institut de Radioprotection et de Sûreté Nucléaire (IRSN). This document presents General Considerations (GC) and Specific Considerations (SC) that support the GCs.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2021

A White Paper on Design and Fabrication of SRF Deflecting Cavities for Elletra-2

Synchrotron Trieste (ST) operates an X-ray light source Elettra and plans to upgrade it to a low-emittance high-brightness X-ray source Elettra-2.0 based on a multi-bend achromat lattice. There is also a significant interest among Elettra users to pursue time-resolved studies of matter choosing the appropriate X-ray pulse duration in the range from 20 picoseconds to a few picoseconds FWHM. Recently, X. Huang (SLAC) and A. Zholents (ANL) performed a study sponsored by ST and proposed modifications to the Elettra-2.0 design that will allow production of picosecond x-ray pulses on many beamlines. They showed that two radio frequency deflecting cavities with slightly different frequencies can be installed in the ring’s sector 8 and produce time-dependent orbit deflection to a few dedicated electron bunches without affecting other regular bunches. These special bunches produce X-ray pulses in which transverse position or angle, or both, are correlated with time. The short X-ray pulse is then obtained by using a narrow slit positioned downstream in the beamline. Many technical details of the proposed modification to Elettra-2.0 are discussed in the supplemental report. We present here the design of a multicell superconducting deflecting cavity for the purpose of the ST Short Pulse X-ray (SPX) project.

43 PARTICLE ACCELERATORS↗
DOE OSTI2021

White paper on Verification and Validation for Cyber Emulation Models

All disciplines that use models to predict the behavior of real-world systems need to determine the accuracy of the models’ results. Techniques for verification, validation, and uncertainty quantification (VVUQ) focus on improving the credibility of computational models and assessing their predictive capability. VVUQ emphasizes rigorous evaluation of models and how they are applied to improve understanding of model limitations and quantify the accuracy of model predictions.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2022

Cumulative Effects Analysis for Wind Energy Development: Current Practices, Challenges, and Opportunities (IEA Wind White Paper)

The increasing global deployment of wind energy has given rise to concerns about potential adverse effects on certain wildlife species and habitats. The United States and European nations use environmental impact assessments (EIAs) to evaluate the environmental effects of wind energy and inform wind energy planning, siting, and operational processes. A key component of the EIA is the cumulative effects analysis/assessment (CEA). CEAs consider the effects of a proposed development in the context of past, present, and future developments, as well as other (non-wind) activities. However, practitioners worldwide have struggled to implement cost-effective and consistent processes for CEAs. Further, there is no widely accepted scientific methodology to assess cumulative effects. As wind energy deployment continues to expand, developing a consistent and scientifically based approach to CEAs may provide a more comparable across assessments and cost-effective means of reducing risk during siting, operations, and decommissioning/repowering, while minimizing regulatory hurdles. This technical report evaluates the current state of CEA practices, covering both land-based and offshore wind energy development. It focuses on impacts from the preconstruction, construction, and operational phases of the wind farm, which are the phases where most research currently exists. Emerging research addresses impacts from the perspective of life cycle assessments (LCAs), including the impacts of manufacturing and preconstruction (May et al. 2020). The technical report also summarizes CEA processes and guidelines, analysis approaches, and current challenges. Finally, it highlights opportunities for further research and coordination, and includes a geographically organized CEA information resource bank.

17 WIND ENERGY↗
DOE OSTI2022

Optimism is not a strategy: A white paper on how to give IFE a fighting chance to be real

With NIF shot N210808, we now have an existence proof of ignition (i.e. Lawson-like criteria exceeded and capsule gain well exceeding unity) in the laboratory and it has generated renewed interest in IFE. However, it is important to recognize that ignition on the NIF has been much more difficult than what was originally envisioned. Moreover, the design for the target that actually obtained burning plasma (Kritcher, Young, Robey, et al., Nature Phys. 2022; Zylstra, Hurricane, Callahan, et al., Nature, 601, 542, 2022) and ignition conditions is much different than the high gain design originally planned in the National Ignition Campaign (NIC; e.g. Lindl, Phys. Plasmas, 2, 3933, 1995; Lindl, Amendt, Berger, et al., Phys. Plasmas, 11, 339, 2004). In order to avoid squandering time and resources, the IFE community must learn the lessons of what happened on the NIF over the past decade.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

A Call to Arms Control: Synergies between Nonproliferation Applications of Neutrino Detectors and Large-Scale Fundamental Neutrino Physics Experiments (A Snowmass White Paper)

The High Energy Physics community can benefit from a natural synergy in research activities into next-generation large-scale water and scintillator neutrino detectors, now being studied for remote reactor monitoring, discovery and exclusion applications in cooperative nonproliferation contexts. Since approximately 2010, US nonproliferation researchers, supported by the National Nuclear Security Administration (NNSA), have been studying a range of possible applications of relatively large (100 ton) to very large (hundreds of kiloton) water and scintillator neutrino detectors. In parallel, the fundamental physics community has been developing detectors at similar scales and with similar design features for a range of high-priority physics topics, primarily in fundamental neutrino physics. These topics include neutrino oscillation studies at beams and reactors, solar, and geological neutrino measurements, supernova studies, and others. Examples of ongoing synergistic work at U.S. national laboratories and universities include prototype gadolinium-doped water and water-based and opaque scintillator test-beds and demonstrators, extensive testing and industry partnerships related to large area fast position-sensitive photomultiplier tubes, and the development of concepts for a possible underground kiloton-scale water-based detector for reactor monitoring and technology demonstrations. Some opportunities for engagement between the two communities include bi-annual Applied Antineutrino Physics conferences, collaboration with U.S. National Laboratories engaging in this research, and occasional NNSA funding opportunities supporting a blend of nonproliferation and basic science R&D, directed at the U.S. academic community.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2022

Performance Testing of a Moving-Bed Gasifier Using Coal, Biomass, and Waste Plastic Blends to Generate White Hydrogen

The objective of this DOE-funded project by the Electric Power Research Institute, Inc. (EPRI), Hamilton Maurer International (HMI) and Sotacarbo S.p.A. (Sotacarbo), is to qualify coal, biomass, and plastic waste blends based on performance testing of selected pellet recipes in a pilot-scale updraft moving-bed gasifier. The testing will provide relevant data to advance the commercial-scale design of the moving-bed gasifier to be able to successfully use these feedstocks to produce hydrogen. In particular, the effects of the waste plastics on feedstock development (i.e., blending and pelletizing) and the resulting products (i.e., syngas compositions, organic condensate production, and ash characteristics) are a focus. The gasifier is Hamilton Mauer International, Inc. (HMI)’s moving-bed gasifier, which has been proven capable of gasifying nearly all coal ranks. It has also shown the ability in prior testing work to gasify wood chips. However, mixtures of these fuels with plastic wastes have not been prepared and gasified together. The feedstocks will be prepared by California Pellet Mill (CPM) under contract to HMI. The technical tasks and current status for this two-year research project are: Feed Procurement and Preparation: Nine different feedstocks were prepared from varying compositions of PRB coal, corn stover biomass, and car fluff waste plastics. Fuel pellets were produced by California Pellet Mill and shipped to Sotacarbo’s test facility in Italy. Test Plan Development: A test plan was created to define the test runs to be performed. The test plan detailed the different tests that were run, instrumentation used, extractive samples taken, and relevant figures of merit. Gasifier Testing: Tests are currently being performed in the pilot-scale gasifier at Sotacarbo using nine different fuel feedstocks generated from varying mixtures of coal, biomass, and plastic wastes. The testing will provide information on gasification reaction efficiency/performance, yielding relevant data for models used to scale up the gasifier design. This task will also include work to reassemble the gasifier at Sotacarbo and perform a baseline 100% coal run. Data Analysis and Reporting: Review of the data, determination of figures of merit, and interpretation of the results to be reported. The results will be used to specify the range of feedstock blends that can be successfully gasified as well as quantify gasifier outputs based on specific blends. This paper will be summarize the pelletizing procedure that insures the viability of the tri-fuel pellets for the gasification runs that are being performed at Sotacarbo’s 30mm up draft moving bed gasifier. Initial gasification tests have been conducted, and all the lab scale tri-fuel pellet gasification runs will be completed by the fall of 2022. Performance data will enable modeling of a full-scale HMI industrial scale gasifier supporting both CHP and Hydrogen production.

01 COAL, LIGNITE, AND PEAT↗