Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “TARGET”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,639 records · Page 91

Crater Morphometry and Scaling in Coarse, Rubble-Like Targets: Insights from Impact Experiments

Spacecraft images reveal that the asteroids Itokawa, Ryugu, and Bennu are covered with coarse, boulder-rich material [1–3]. Impactors that collide with these bodies encounter a target with extreme physical heterogeneity. Other bodies can also possess significant physical heterogeneity (e.g., megaregolith, layering, etc.). Such heterogeneities establish free surfaces and impedance contrasts that can affect shock propagation and attenuation. Therefore, such heterogeneities may also affect crater formation and excavation [4], melt generation [5–7] and crater scaling [4]. As described by [8,9], the extent to which target heterogeneity affects crater formation likely depends on how the length scale, d, of the heterogeneity (e.g., boulder size on a rubble-pile asteroid) compares to the width of the shock, w, generated by impact. Here we further test this hypothesis using impact experiments across a broad range of impact velocities and target grain sizes to systematically vary the ratio between the width of the shock and the diameter of target grains.

Daly, R. T.↗

The Dark Target Algorithm for Observing the Global Aerosol System: Past, Present and Future

The Dark Target aerosol algorithm was developed to exploit the information content available from the observations of Moderate-Resolution Imaging Spectroradiometers (MODIS), to better characterize the global aerosol system. The algorithm is based on measurements of the light scattered by aerosols toward a space-borne sensor against the backdrop of relatively dark Earth scenes, thus giving rise to the name “Dark Target”. Development required nearly a decade of research that included application of MODIS airborne simulators to provide test beds for proto-algorithms and analysis of existing data to form realistic assumptions to constrain surface reflectance and aerosol optical properties. This research in itself played a significant role in expanding our understanding of aerosol properties, even before Terra MODIS launch. Contributing to that understanding were the observations and retrievals of the growing Aerosol Robotic Network (AERONET) of sun-sky radiometers, which has walked hand-in-hand with MODIS and the development of other aerosol algorithms, providing validation of the satellite-retrieved products after launch. The MODIS Dark Target products prompted advances in Earth science and applications across subdisciplines such as climate, transport of aerosols, air quality, and data assimilation systems. Then, as the Terra and Aqua MODIS sensors aged, the challenge was to monitor the effects of calibration drifts on the aerosol products and to differentiate physical trends in the aerosol system from artefacts introduced by instrument characterization. Our intention is to continue to adapt and apply the well-vetted Dark Target algorithms to new instruments, including both polar-orbiting and geosynchronous sensors. The goal is to produce an uninterrupted time series of an aerosol climate data record that begins at the dawn of the 21st century and continues indefinitely into the future.

Aerosol↗

Autonomous target tracking of small bodies during flybys

Spacecraft flybys of small solar system bodies provide important science return in the form of images of the target body taken around closest approach. In order to maximize the number of images taken of the target, an autonomous closed-loop tracking system has been developed to maintain lock on the target during the flyby. The system uses images to estimate the spacecrafts target-relative position and attitude, which is then used to point the camera. The system has been successfully used twice: the Deep Space 1 flyby of comet Borrelly and the Stardust flyby of asteroid Annefrank. This paper describes in detail the tracking algorithms and flight results.

Synnott, Stephen P.↗

Mars Target Encyclopedia: Information Extraction for Planetary Science

We created a new reference database called the Mars Target Encyclopedia (MTE) that contains compositional information about science targets (usually rocks or soils) on Mars. Users can search for all targets that contain an element (e.g., “calcium”) or mineral (e.g., “hematite”) and see a map view of their spatial locations (see Fig. 1). Clicking on a search result or searching for a specific target of interest (e.g., “Dillinger”) brings up a page that compiles previous findings about its composition (see Fig. 2). The information that populates the MTE was mined from the planetary science literature using information extraction technology. All information in the MTE is linked to the source publication from which it was extracted, so users can easily browse the full context in the original document (Fig. 2).

Singh, K.↗

Mars 2020 Perseverance Edl Gnc Safe Target Selection Reconstruction

On February 18th, 2021, NASA landed Perseverance on the Jezero crater (on Mars) using a new Terrain Relative Navigation (TRN) capability. TRN is com-prised of a new sensor, the Lander Vision System (LVS), and a new GNC algo-rithm, the Safe Target Selection (STS). LVS localized the descent vehicle with respect to a map. STS selected the safe landing target within a reachable region from the on-board Safe Targets Map (STM). The landing target was then handed to the Mars Science Laboratory (MSL) heritage powered descent GNC system to execute the landing. This paper describes the design and the as-flown performance of the STS algorithm.

Dutta, Soumyo↗

Impact Cratering Experiments Using Lunar Highland Simulant as Target Material

The properties of a target material have long been known to influence the cratering process for relatively small impact events, where the material “strength” is more dominant than the local gravitational force[1]. Strength in granular materials, however, is dependent on the interactions among packing fraction, grain size, and cohesion[2], and can thus vary for the same bulk material at different porosities. Experimentally, this relationship has been demonstrated for the most commonly used target material in impact cratering studies, unconsolidated sand, where [3] observed a notable decrease in depth-diameter ratios(d/D)for more densely packed (higher packing fraction, or lower porosity) targets. In order to extend the applicability, or properly scale, those findings to relatively small lunar craters, for example, a more realistic analog material(in terms of physical properties) should be interrogated for use as a target medium. To this end, we have conducted a series of impact cratering experiments using a lunar-highlands regolith simulant to investigate the relationship between packing fraction and crater morphology/morphometry.

impact cratering↗

Controlling data transfers from an origin compute node to a target compute node

Methods, apparatus, and products are disclosed for controlling data transfers from an origin compute node to a target compute node that include: receiving, by an application messaging module on the target compute node, an indication of a data transfer from an origin compute node to the target compute node; and administering, by the application messaging module on the target compute node, the data transfer using one or more messaging primitives of a system messaging module in dependence upon the indication.

97 MATHEMATICS AND COMPUTING↗

SNS second target station moderator performance update

In its first years of operations of its first target station, the Spallation Neutron Source (SNS) is working towards a facility upgrade by a megawatt-class second target station operated at 20 Hz repetition rate, which is intended to complement the existing ORNL neutron sources, the first SNS target station and the HFIR reactor, with high-intensity cold neutron beams.The first round of optimization calculations converged on larger-volume cylindrical para-hydrogen moderators placed in wing configuration on top and bottom of a flat mercury target, pre-moderated by layers of ambient water and surrounded by beryllium reflector. The metric of these optimization calculations was time-averaged and energy-integrated neutron brightness below 5 meV with the requirement to be able to serve 20 ports with neutrons. A summary of these calculations will be given including lessons learned from the variety of simulated configurations and detailed neutron performance characteristics like spectral intensities, emission time distributions, local variations of moderator brightness at the viewed areas, and sensitivity of the optimization metric to optimized parameters for the most promising configuration.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Renaissance of the ~ 1-TeV Fixed-Target Program

This document describes the physics potential of a new fixed-target program based on a {approx}1 TeV proton source. Two proton sources are potentially available in the future: the existing Tevatron at Fermilab, which can provide 800 GeV protons for fixed-target physics, and a possible upgrade to the SPS at CERN, called SPS+, which would produce 1 TeV protons on target. In this paper we use an example Tevatron fixed-target program to illustrate the high discovery potential possible in the charm and neutrino sectors. We highlight examples which are either unique to the program or difficult to accomplish at other venues.

43 PARTICLE ACCELERATORS↗

Prototype Spallation Neutron Source Rotating Target Assembly Final Test Report

A full-scale prototype of an extended vertical shaft, rotating target assembly based on a conceptual target design for a 1 to 3-MW spallation facility was built and tested. Key elements of the drive/coupling assembly implemented in the prototype include high integrity dynamic face seals, commercially available bearings, realistic manufacturing tolerances, effective monitoring and controls, and fail-safe shutdown features. A representative target disk suspended on a 3.5 meter prototypical shaft was coupled with the drive to complete the mechanical tests. Successful operation for 5400 hours confirmed the overall mechanical feasibility of the extended vertical shaft rotating target concept. The prototype system showed no indications of performance deterioration and the equipment did not require maintenance or relubrication.

McManamy, Thomas J↗

Electrons on the HDice target: Results and analysis of test runs at JLab in 2012

During the Jefferson Labaratory E06-101 (g14) experiment \cite{g14} utilizing photons on solid HD and performed in Hall B, two opportunities arose for targets to be subjected to multi-GeV electron beams in week-long campaigns of dose accumulation and NMR polarization measurements. This was in preparation for conditionally approved electron experiments after the 12 GeV JLab upgrade\cite{trans}. Besides the important thermal effects, evidence consistent with screening of the NMR and with decay of the target polarization was observed during bombardment and for a time afterwards. The solid hydrogens have been the subject of previous radiation damage studies, both for possible polarized DT fusion\cite{Forrest97} and for production of dynamically polarized nuclear targets\cite{Radtke04}. We synthesize all this information into an overall picture that can guide on-going development of the HDice target system for future use.

Lowry, Michael↗

Ion beam sputter target and method of manufacture

A target for use in an ion beam sputtering apparatus made of at least two target tiles where at least two of the target tiles are made of different chemical compositions and are mounted on a main tile and geometrically arranged on the main tile to yield a desired chemical composition on a sputtered substrate. In an alternate embodiment, the tiles are of varied thickness according to the desired chemical properties of the sputtered film. In yet another alternate embodiment, the target is comprised of plugs pressed in a green state which are disposed in cavities formed in a main tile also formed in a green state and the assembly can then be compacted and then sintered.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Protocells and their use for targeted delivery of multicomponent cargos to cancer cells

Various embodiments provide materials and methods for synthesizing protocells for use in targeted delivery of cargo components to cancer cells. In one embodiment, the lipid bilayer can be fused to the porous particle core to form a protocell. The lipid bilayer can be modified with targeting ligands or other ligands to achieve targeted delivery of cargo components that are loaded within the protocell to a target cell, e.g., a type of cancer. Shielding materials can be conjugated to the surface of the lipid bilayer to reduce undesired non-specific binding.

59 BASIC BIOLOGICAL SCIENCES↗

HIGH POWER BEAM DUMP AND TARGET / ACCELERATOR INTERFACE PROCEDURES

Satisfying operational procedures and limits for the beam target interface is a critical concern for high power operation at spallation neutron sources. At the Oak Ridge Spallation Neutron Source (SNS) a number of protective measures are instituted to ensure that the beam position, beam size and peak intensity are within acceptable limits at the target and high power Ring Injection Dump (RID). The high power beam dump typically handles up to 50 100 kW of beam power and its setup is complicated by the fact that there are two separate beam components simultaneously directed to the dump. The beam on target is typically in the 800-1000 kW average power level, delivered in sub- s 60 Hz pulses. Setup techniques using beam measurements to quantify the beam parameters at the target and dump will be described. However, not all the instrumentation used for the setup and initial qualification is available during high power operation. Additional techniques are used to monitor the beam during high power operation to ensure the setup conditions are maintained, and these are also described.

Blokland, Willem↗

Enhancing proton acceleration by using composite targets

Efficient laser ion acceleration requires high laser intensities, which can only be obtained by tightly focusing laser radiation. In the radiation pressure acceleration regime, where the tightly focused laser driver leads to the appearance of the fundamental limit for the maximum attainable ion energy, this limit corresponds to the laser pulse group velocity as well as to another limit connected with the transverse expansion of the accelerated foil and consequent onset of the foil transparency. These limits can be relaxed by using composite targets, consisting of a thin foil followed by a near critical density slab. Such targets provide guiding of a laser pulse inside a self-generated channel and background electrons, being snowplowed by the pulse, compensate for the transverse expansion. The use of composite targets results in a significant increase in maximum ion energy, compared to a single foil target case.

PACS numbers: 52.25.Os, 52.38.Kd, 52.27.Ny↗

Search for Hidden Sector and Dark Matter Particles Produced at Fermilab's NuMI Target

In the long tradition of exotic searches at fixed-target experiments, we plan to use the NuMI beam-target and the NOvA Near Detector to observe potential signatures of Hidden Sector or Dark Matter particles, either directly produced within the target or through theoretically postulated mediators. Expecting mostly scattering events on electrons or nucleons as their signatures, an example of a mediator generated scalar dark matter particles is used to discuss the target production profile of a dark matter beam. This channel explores the capabilities of the detector to observe neutral-current events from electron-neutrino scattering interactions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Protocells and their use for targeted delivery of multicomponent cargos to cancer cells

Various embodiments provide materials and methods for synthesizing protocells for use in targeted delivery of cargo components to cancer cells. In one embodiment, the lipid bilayer can be fused to the porous particle core to form a protocell. The lipid bilayer can be modified with targeting ligands or other ligands to achieve targeted delivery of cargo components that are loaded within the protocell to a target cell, e.g., a type of cancer. Shielding materials can be conjugated to the surface of the lipid bilayer to reduce undesired non-specific binding.

59 BASIC BIOLOGICAL SCIENCES↗

Porous nanoparticle-supported lipid bilayers (protocells) for targeted delivery and methods of using same

The present invention is directed to protocells for specific targeting of hepatocellular and other cancer cells which comprise a nanoporous silica core with a supported lipid bilayer; at least one agent which facilitates cancer cell death (such as a traditional small molecule, a macromolecular cargo (e.g. siRNA or a protein toxin such as ricin toxin A-chain or diphtheria toxin A-chain) and/or a histone-packaged plasmid DNA disposed within the nanoporous silica core (preferably supercoiled in order to more efficiently package the DNA into protocells) which is optionally modified with a nuclear localization sequence to assist in localizing protocells within the nucleus of the cancer cell and the ability to express peptides involved in therapy (apoptosis/cell death) of the cancer cell or as a reporter, a targeting peptide which targets cancer cells in tissue to be treated such that binding of the protocell to the targeted cells is specific and enhanced and a fusogenic peptide that promotes endosomal escape of protocells and encapsulated DNA. Protocells according to the present invention may be used to treat cancer, especially including hepatocellular (liver) cancer using novel binding peptides (c-MET peptides) which selectively bind to hepatocellular tissue or to function in diagnosis of cancer, including cancer treatment and drug discovery.

59 BASIC BIOLOGICAL SCIENCES↗