SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The main directions of application and synthesis of lithium niobate (LiNbO{sub 3}) and the advantages and drawbacks of the synthesis techniques are considered. The results of structural and morphological characteristics appropriate for use in the creation of devices are shown. The tasks for successful implementation of LiNbO{sub 3} films into novel devices are formulated.
Self-propagating high-temperature synthesis without preheating has been realized in powder mixtures consisting of large spherical VT6 titanium alloy granules, small dendritic titanium particles, and black amorphous boron. Synthesis in a combustion wave involved a few steps: first, boron reacted with fine-particle titanium to form a boride matrix, which then reacted with molten VT6 titanium alloy granules. We have obtained a porous metal–ceramic material similar in structure to composites.
Technologically viable principles have been developed for the preparation of the MAX phase Ti{sub 2}AlC by self-propagating high-temperature synthesis (SHS) with a reduction step, using titanium dioxide. We have studied the influence of synthesis conditions (starting-mixture composition and ratio of reactants) on the composition, structure, and particle size of Ti{sub 2}AlC powders. The results demonstrate that an excess of magnesium in the starting mixture leads to a decrease in the percentage of MgAl{sub 2}O{sub 4} (spinel), and carbon deficiency in the starting mixture reduces the percentage of titanium carbide in the final product. The Ti{sub 2}AlC powders prepared by SHS consist of agglomerates of layered particles differing in size: from coarse (several microns) to ultrafine and nanometer-sized particles. The composition of the powders was confirmed by chemical analysis, microstructural examination, and X-ray diffraction.
All the new isotopes of superheavy elements in the reactions with {sup 48}Ca ions and actinide targets, synthesized at the Flerov Laboratory of Nuclear Reactions (FLNR), have been obtained at the Dubna Gas-Filled Recoil Separator (DGFRS). Success was achieved with the use of several techniques, algorithms and approaches with record performance in their area. The most sophisticated of them are rare event detection technology, methods of measuring the effective equilibrium charges of heavy ions and nuclei in hydrogen at low pressure, modified approaches to evaluation of probabilistic characteristics of detected multichain events, beam-free test methods of detection equipment, and some other ones. The author analyzes the approaches that have led ultimately to a real breakthrough and an advance in experiments on the synthesis of superheavy elements. The development of detection systems also attracts the authors’ attention. Contributions from some facilities—such as SHIP, TASCA, and GARIS (RIKEN)—to synthesis experiments are partially noted. Under consideration are methods of automation of similar experiments, including the development of control and shielding systems for operation with highly active actinide targets. Some techniques for detecting α decay of heavy nuclei that came before the current experiments with electromagnetic separators are reviewed briefly. The methods, algorithms and hardware presented cover a more than twenty-year period of commissioning and application in long-term experiments at FLNR DGFRS.
Luminescence, electron spin resonance, and X-ray diffraction (XRD) methods were used to investigate the features of ZnS-powder doped by Mn impurity during self-propagating high-temperature synthesis and subsequent annealing. The obtained powder consists of ZnS microcrystals with mainly hexagonal phase (80 {+-} 5)%. It was found, that after synthesis Mn presents not only in the form of non-uniformly distributed microscopic impurities in ZnS, but also in the form of Mn metal nanocrystals. Thermal annealing at 800 Degree-Sign C leads to the additional doping of ZnS from metallic Mn, to the redistribution of the embedded Mn in the volume of microcrystals, and to the ZnS oxidation. At the same time, the ratio between the cubic and hexagonal phases does not change. It was shown that annealing causes a decrease in the concentration of the defects responsible for the luminescence-excitation bands, which correspond to transitions from the ground to the excited states of the Mn{sup 2+} ion. As a result of annealing, there is also a change in XRD coherent domain size. Simultaneously, the intensity of peaks in the luminescence-excitation spectrum with wavelengths of 375 and 395 nm was changed. The causes of these changes and the nature of the corresponding bands are discussed.
Abstract—Samples of arrays of nanowires are produced from iron, iron–cobalt and iron–nickel alloys via matrix synthesis based on polymer track membranes with pore diameters ranging from 30 to 300 nm. The influence of stress and pore diameter on the galvanic process and structure of nanowires is studied. The arrays of nanowires are examined by microscopy and X-ray diffraction. The magnetic properties are inspected via magnetometry and Mössbauer spectroscopy. The angular dependences of hysteresis loop shape are obtained and comprehensively discussed. As shown, decreasing the growth stress and/or increasing the pore diameter make the Mössbauer spectra of nanowires similar to those of bulk materials. Furthermore, the higher the growth stress is, the larger is the coercive force of nanowires. For the studied species of nanomaterials, the ability to control the magnetic properties during the synthesis is shown, as well.
Iron nanowires (NWs) were obtained by template synthesis using polymer track membranes in the framework of development of a general method for the synthesis of regular metal nanostructures. The surface topography of NWs was studied by scanning electron microscopy, and the local state of iron atoms was determined by Mössbauer spectrometry.
Monodisperse carbon nanodots (CNDs) possessing photoluminescence in the visible spectral range have been obtained by means of template synthesis. An approach to the synthesis of CNDs with controlled position of the emission line is demonstrated by using of polyaromatic carbon-containing precursors with different conjugated systems of multiple bonds.
Ammonia is a critically important industrial chemical and is largely responsible for sustaining the growing global population. To provide ammonia to underdeveloped regions and/or regions far from industrial production hubs, modular systems have been targeted and often involve unconventional production methodologies. These novel approaches for ammonia production can tap renewable resources at smaller scales located at the point of use, while decreasing the CO 2 footprint. Plasma-assisted catalysis and electrochemical ammonia synthesis have promise owing to their atmospheric pressure and low-temperature operation conditions and the ability to construct units at scales desired for modularization. Fundamental and applied studies are underway to assess these processes, although many unknowns remain. In this review, we discuss recent developments and opportunities for unconventional ammonia synthesis with a focus on plasma-stimulated systems.
During the past decades, nanocrystals have attracted broad attention due to their unique shape- and size-dependent physical and chemical properties that differ drastically from their bulk counterparts. Hitherto, much effort has been dedicated to achieving rational controlling over the morphology, assembly, and related energy applications of the nanomaterials. Therefore, the ability to manipulate the morphology, size, and size distribution of inorganic nanomaterials is still an important goal in modern materials physics and chemistry. Especially, the world s demand for energy supply is causing a dramatic escalation of social and political unrest. Likewise, the environmental impact of the global climate change due to the combustion of fossil fuel is becoming increasingly alarming. These problems compel us to search for effective routes to build devices that can supply sustainable energy, with not only high efficiency but also environmental friendship. One of ways to relieve the energy crisis is to exploit devices based on renewable energy sources, such as solar energy and water power. Aiming at this exploration, the primary stage requires the design of appropriate strategies for the synthesis of high-quality nanocrystals with respect to size uniformity and superior electrochemical performances. As a consequence, we organize the current special issue for Journal of Nanomaterials to provide the authors with a platform and readers with the latest achievements of nanocrystals-related synthesis, assembly, and energy applications.
Undoped and indium (In)-doped lead telluride (PbTe) nanostructures were synthesized via solvothermal/hydrothermal route. The crystalline structure of the as-prepared undoped and In-doped PbTe samples was examined by X-ray diffraction (XRD) which indicated the formation of face-centered single-phase cubic crystal. A first principle calculation on indium doping shows that the indium atoms are more likely to replace lead (Pb) rather than to take the interstitial sites. Laser-induced breakdown spectroscopy (LIBS) analysis confirms that indium is incorporated into the PbTe matrix of the indium-doped PbTe samples. The effects of surfactant and synthesis temperature on the structure and morphology of the undoped PbTe were also investigated; it was found that PbTe nanostructures synthesized with the addition of surfactants exhibited uniform shapes and their size increased with the synthesis temperature.
Pacific Northwest National Laboratory has been conducting research to investigate the feasibility of producing mixed alcohols from biomass-derived synthesis gas (syngas). In recent years, this research has primarily involved the further development of catalysts containing rhodium and manganese based on the results of earlier catalyst screening tests. Testing continued in FY 2012 to further improve the Ir-promoted RhMn catalysts on both silica and carbon supports for producing mixed oxygenates from synthesis gas. This testing re-examined selected alternative silica and carbon supports to follow up on some uncertainties in the results with previous test results. Additional tests were conducted to further optimize the total and relative concentrations of Rh, Mn, and Ir, and to examine selected promoters and promoter combinations based on earlier results. To establish optimum operating conditions, the effects of the process pressure and the feed gas composition also were evaluated.
In this work, we have primarily utilized isothermal titration calorimetry (ITC) and complimentary catalyst characterization techniques to study and assess the impact of solution conditions (i.e., solid-liquid) interface on the synthesis of heterogeneous and electro-catalysts. Isothermal titration calorimetry is well-known technique from biochemistry/physics, but has been applied to a far lesser extent to characterize buried solid-liquid interfaces in materials science. We demonstrate the utility and unique information provided by ITC for two distinct catalytic systems. We explored the thermodynamics associated catalyst synthesis for two systems: (i) ion-exchange or strong electrostatic adsorption for Pt and Pd salts on silica and alumina materials (ii) adsorption to provide covalent attachment of metal and metal-oxo clusters to Dion-Jacobsen perovskite materials.
Microporous zeolite adsorbent materials are widely used as a medium for separating gases. Adsorbent gas separation systems can run at ambient temperature and require minimal pressure to flow the input gas stream across the adsorbent bed. This allows for low energy consumption relative to other types of separation systems. Specific zeolites also have a high capacity and selectivity for the gases of interest, leading to compact and efficient separation systems. These characteristics are particularly advantageous for the application of signatures detection for non-proliferation, which often requires portable systems with low power draw. Savannah River National Laboratory currently is the leader in using zeolites for noble gas sampling for non-proliferation detection platforms. However, there is a constant customer need for improved sampling capabilities. Development of improved zeolite materials will lead to improved sampling technology. Microwave-assisted and conventional hydrothermal synthesis have been used to make a variety of zeolites tailored for noble gas separation. Materials characterization data collected in this project has been used to help guide the synthesis of improved zeolite materials. Candidate materials have been down-selected based on highest available surface area, maximum overall capacity for gas adsorption and highest selectivity. The creation of improved adsorbent materials initiated in this project will lead to development of more compact, efficient and effective noble gas collectors and concentrators. The work performed in this project will be used as a foundation for funding proposals for further material development as well as possible industrial applications.
Science Undergraduate Laboratory Internship (SULI) Program Report: Additive manufacturing (AM) based on direct-write technologies has emerged as the predominant method for the fabrication of passive sensors for the harsh operating environments seen in a nuclear reactor. Through the modification of previous methods, Idaho National Laboratory and Villanova University have improved the synthesis process for AM feedstock, which will allow for the improvement of advanced nuclear sensors and instrumentation. A major part of this work includes the synthesis process of relevant AM compatible feedstock to support the development, fabrication, and testing of AM sensors for peak temperature detection. For this report, bismuth, bismuth/platinum, tin, tin/silver, tin/zinc, indium, and indium/silver bi-metallic nanoparticles were synthesized using the polyol method, which will enhance temperature sensitivity and allow for miniaturization. To characterize the synthesized nanoparticles, we used x-ray fluorescence to evaluate the elemental composition of the nanoparticles and differential scanning calorimetry and thermogravimetric analysis to determine the melting point and mass loss of the samples. Results show that bi-metallic nanoparticles are a viable option for the fabrication of high-resolution AM melt wires. The temperature sensitivity can be brought to within 5°C and melt wires can be fabricated that are in the micrometer scale. This will expand the range of irradiation experiments melt wires can be used for and the measured temperature will be significantly more accurate.
Fatty acids can be produced biosynthetically in microbes and these compounds can serve as precursors to biodiesels and other high value oleochemicals. However, progress on engineering fatty acid biosynthesis, and biofuel synthesis more generally, has been hindered by current quantification methods that are either indirect or not amenable to high-throughput or single-cell resolution screening. In this project, we assembled an interdisciplinary team with complimentary expertise in synthetic biology and microscopy, metabolic engineering, and chemical imaging to address these challenges. We used chemical imaging to directly measure lipid biosynthesis in Escherichia coli engineered to produce fatty acids, obtaining detailed single-cell resolution measurements. We deployed stimulated Raman scattering (SRS) microscopy in concert with multiplexed genome engineering and gene circuit design strategies from synthetic biology to optimize production of fatty acids. These results provided novel insight into cell-to-cell heterogeneity present in biofuel production strains. In addition, we introduced new chemical imaging methods which are label-free and do not require fluorescent reporters. These efforts were complemented by other studied developing foundational tools for regulation and control, which offer excellent potential for advancing researchers’ ability to rapidly design, build, and test strains for enhanced biofuel synthesis.
In this study, we report the synthesis of a new cubic neodymium-rhenium metallic alloy NdRe 2 through the utilization of high pressure and laser heating in a diamond anvil cell. NdRe 2 crystallizes in the Fd$\overline{3}$m space group with a lattice parameter equal to 7.486 (2) Å and Z = 8 at 24 (1) GPa and 2,200 (100) K. It was studied using high-pressure single-crystal X-ray diffraction. The compound crystallizes in the cubic MgCu 2 structure type. Its successful synthesis further proves that high-pressure high-temperature conditions can be used to obtain alloys holding a Laves phase structure. Ab initio calculations were done to predict the mechanical properties of the material. We also discuss the usage of extreme conditions to synthesize and study materials present in the nuclear waste.
Despite intense interest in the catalytic potential of transition metal oxide heterostructures, originating from their large surface area and tunable chemistry, the fabrication of well-defined multicomponent oxide coatings with controlled architectures remains challenging. Here, we demonstrate a simple and effective swelling-assisted sequential infiltration synthesis (SIS) strategy to fabricate hierarchically porous multicomponent metal-oxide electrocatalysts with tunable bimetallic composition. A combination of solution-based infiltration (SBI) of transition metals, iron (Fe), nickel (Ni), and cobalt (Co), into a block copolymer (PS73-b-P4VP28) template, followed by vapor-phase infiltration of alumina using sequential infiltration synthesis (SIS), was employed to synthesize porous, robust, conformal and transparent multicomponent metal-oxide coatings like Fe/AlO x , Fe+Ni/AlO x , and Fe+Co/AlO x . Electrochemical assessments for the oxygen evolution reaction (OER) in a 0.1 M KOH electrolyte demonstrated that the Fe+Ni/AlO x composite exhibited markedly superior catalytic activity, achieving an impressive onset potential of 1.41 V and a peak current density of 3.29 mA/cm 2 . This superior activity reflects the well-known synergistic effect of alloying transition metals with a trace of Fe, which facilitates OER kinetics. Overall, our approach offers a versatile and scalable path towards the design of stable and efficient catalysts with tunable nanostructures, opening new possibilities for a wide range of electrochemical energy applications.