Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Stress Modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,639 records · Page 91

Application of Probability Methods to Assess Crash Modeling Uncertainty

Full-scale aircraft crash simulations performed with nonlinear, transient dynamic, finite element codes can incorporate structural complexities such as: geometrically accurate models; human occupant models; and advanced material models to include nonlinear stress-strain behaviors, and material failure. Validation of these crash simulations is difficult due to a lack of sufficient information to adequately determine the uncertainty in the experimental data and the appropriateness of modeling assumptions. This paper evaluates probabilistic approaches to quantify the effects of finite element modeling assumptions on the predicted responses. The vertical drop test of a Fokker F28 fuselage section will be the focus of this paper. The results of a probabilistic analysis using finite element simulations will be compared with experimental data.

Lyle, Karen H.↗

The effects of uneven fiber spacing on thermal residual stresses in a unidirectional SCS-6Ti-15-3 laminate

High residual stresses develop in SCS-6/Ti-15-3 composites during cooldown from the fabrication temperature; these residual stresses can effect the mechanical and physical properties of the composite. Discrete fiber-matrix finite element models were used to study the residual stresses due to the temperature change during the fabrication process, including the effects of uneven fiber spacing, the free surface, and increased fiber volume fractions. To accurately model the effects of the free surface, it is only necessary to model one fiber through the thickness. Below the first ply, the analysis predicts stress distributions that are identical to the infinite array predictions. For uneven fiber space less then 0.042 mm in an interior ply, the maximum hoop stress was predicted to occur between fibers within a ply and to increase as the fiber spacing decreased. The maximum hoop stress correlated well with the observed radial cracking between fibers. For the case of touching fibers, the analysis predicted tensile radial stresses at the fiber-matrix debonding during the fabrication cooldown. Identical trends were predicted for uneven fiber spacing in surface plies with slightly greater values of maximum stresses. The analysis predicted matrix yielding to occur upon cooldown when the edge-to-edge fiber spacing was less than or equal to 0.022 mm. The stress distributions predicted for increasing fiber volume fractions were similar to those predicted for decreasing the fiber spacing for two adjacent fibers within a ply.

Bigelow, C. A.↗

The effects of uneven fiber spacing on thermal residual stresses in a unidirectional SCS-6/Ti-15-3 laminate

High residual stresses develop in SCS-6/Ti-15-3 composites during cooldown from the fabrication temperature; these residual stresses can effect the mechanical and physical properties of the composite. Discrete fiber-matrix finite element models were used to study the residual stresses due to the temperature change during the fabrication process, including the effects of uneven fiber spacing, the free surface, and increased fiber volume fractions. To accurately model the effects of the free surface, it is only necessary to model one fiber through the thickness. Below the first ply, the analysis predicts stress distributions that are identical to the infinite array predictions. For uneven fiber space less than 0.042 mm in an interior ply, the maximum hoop stress was predicted to occur between fibers within a ply and to increase as the fiber spacing decreased. The maximum hoop stress correlated well with the observed radial cracking between fibers. For the case of touching fibers, the analysis predicted tensile radial stresses at the fiber-matrix debonding during the fabrication cooldown. Identical trends were predicted for uneven fiber spacing in surface plies with slightly greater values of maximum stresses. The analysis predicted matrix yielding to occur upon cooldown when the edge-to-edge fiber spacing was less than or equal to 0.022 mm. The stress distributions preidcted for increasing fiber volume fractions were similar to those predicted for decreasing the fiber spacing for two adjacent fibers within a ply.

Bigelow, Catherine A.↗

Caloric Effects Induced by Uniform and Non-uniform Stress in Shape-Memory Materials

A Ginzburg–Landau model is developed that is adequate to describe a square-to-rectangle martensitic transition with associated shape-memory and superelastic properties. Using this model we study caloric effects in the vicinity of the martensitic transition induced by stress and we compare the case of a uniform uniaxial stress and the case of a non-uniform continuous distribution of stresses that produce bending of the material. The former case corresponds to an elastocaloric effect and the latter corresponds to a flexocaloric effect. The aim of the work is to quantitatively compare both cases, which we show must be accomplished in terms of equal amounts of exchanged mechanical work. It is then obtained that the flexocaloric effect is more efficient for low exchanged work but less efficient for large exchanged work.

36 MATERIALS SCIENCE↗

The effect of adhesive layers on the fracture of laminated structures

The effect of the thickness and the elastic properties of the adhesive layers in laminated structures is considered. The structure is assumed to consist of two sets of periodically arranged dissimilar layers which may contain cracks perpendicular to the interfaces. The crack problem is solved under the assumption of plane strain or generalized plane stress and by using two different models for the adhesive layers. In the first model the adhesive layer is approximated by a combination of tensile and shear springs. In the second the adhesive layer is considered to be an elastic continuum, hence involving no approximating assumptions. The results regarding the stress intensity and stress concentration factors obtained from these two models and that found by ignoring the adhesive layers are presented and some comparisons are made.

Gecit, M. R.↗

Coupled Hydromechanical Modeling and Assessment of Induced Seismicity at FWU: Utilizing Time-Lapse VSP and Microseismic Data

The objective of this work is to utilize integrated geomechanics, field vertical seismic profile (VSP) and microseismic data to characterize the complex subsurface stress conditions at the Farnsworth Unit (FWU). The model is based on a five-spot sector model extracted from a primary geomechanical model. The five-spot well injection pattern is characterized by extensive reservoir characterization data, such well logs, extracted cores and borehole geophone data, to facilitate the detailed examination of stress changes and microseismic event occurrences. The study utilizes field vertical seismic volumes acquired from the injection well 13-10A. The seismic volumes successfully provided snapshots of the behavior of the reservoir at distinct times. The use of VSP and microseismic data provided direct and indirect estimates of the dynamic stress changes occurring in the overburden, reservoir and underburden rock formations. In order to illuminate the stress regions and identify rocks that have undergone inelastic failure, microseismic event occurrences were utilized. Microseismic activity has been detected at the FWU; further study of its locations, timing, and magnitude was needed to deduce the nature of the changing stress state. The results of the study revealed that microseismic events were successfully modeled within the Morrow B formation. Moment magnitudes of seismic events were within the same magnitudes for events in the reservoir, suggesting the suitability of the model. The results of the study showed that the computed moment magnitudes for seismic events were insignificant to warrant safety concerns. The study findings showed the usefulness of coupled hydromechanical models in predicting the subsurface stress changes associated with CO 2 injection. The knowledge gained from this study will serve as a guideline for industries planning to undertake underground CO 2 storage, and characterize the subsurface stress changes.

02 PETROLEUM↗

Residual Strength Prediction of Fuselage Structures with Multiple Site Damage

This paper summarizes recent results on simulating full-scale pressure tests of wide body, lap-jointed fuselage panels with multiple site damage (MSD). The crack tip opening angle (CTOA) fracture criterion and the FRANC3D/STAGS software program were used to analyze stable crack growth under conditions of general yielding. The link-up of multiple cracks and residual strength of damaged structures were predicted. Elastic-plastic finite element analysis based on the von Mises yield criterion and incremental flow theory with small strain assumption was used. A global-local modeling procedure was employed in the numerical analyses. Stress distributions from the numerical simulations are compared with strain gage measurements. Analysis results show that accurate representation of the load transfer through the rivets is crucial for the model to predict the stress distribution accurately. Predicted crack growth and residual strength are compared with test data. Observed and predicted results both indicate that the occurrence of small MSD cracks substantially reduces the residual strength. Modeling fatigue closure is essential to capture the fracture behavior during the early stable crack growth. Breakage of a tear strap can have a major influence on residual strength prediction.

Chen, Chuin-Shan↗

Second-order near-wall turbulence closures - A review

Advances in second-order near-wall turbulence closures are summarized. All closures under consideration are based on high-Reynolds-number models. Most near-wall closures proposed to date attempt to modify the high-Reynolds-number models for the dissipation function and the pressure redistribution term so that the resultant models are applicable all the way to the wall. The asymptotic behavior of the near-wall closures is examined and compared with the proper near-wall behavior of the exact Reynolds-stress equations. It is found that three second-order near-wall closures give the best correlations with simulated turbulence statistics. However, their predictions of near-wall Reynolds-stress budgets are considered to be incorrect. A proposed modification to the dissipitation-rate equation remedies part of those predictions. It is concluded that further improvements are required if a complete replication of all the turbulence properties and Reynolds-stress budgets by a statistical model of turbulence is desirable.

So, R. M. C.↗

Numerical Analysis of Cavitation-Induced Two-Phase Fluid Transients in Cryogenic Feedlines Using Finite Volume Procedure

This article presents a numerical investigation of the cavitation induced fluid transient in cryogenic feedline due to sudden closure of the valve A one dimensional numerical model based on finite volume procedure consisting of nodes and branches using Generalized Fluid System Simulation Program ( has been employed for the prediction of pressure variations The unsteady friction formulation accurately determines wall shear stress, and a homogeneous mixture model is used for two phase flow modeling Numerical results obtained with the present formulation are compared with experimental results and Method of Characteristic ( based results It is observed that low residual in flow variable calculation improves the solution providing numerically stable results GFSSP is able to reproduce the fluid transient peak due to vapor collapse Subsequently, it can retain the shape of pressure wave for two phase fluid transients, but it is dampening faster compared to experiments Further investigation is required with set of experiments to validate the present numerical approach for different experimental data.

Fluid Transient↗

LACIE: Wheat yield models for the USSR

A quantitative model determining the relationship between weather conditions and wheat yield in the U.S.S.R. was studied to provide early reliable forecasts on the size of the U.S.S.R. wheat harvest. Separate models are developed for spring wheat and for winter. Differences in yield potential and responses to stress conditions and cultural improvements necessitate models for each class.

Sakamoto, C. M.↗

Investigations of lubricant rheology as applied to elastohydrodynamic lubrication

Measurements of lubricant shear rheological behavior in the amorphous solid region and near the liquid-solid transition are reported. Elastic, plastic and viscous behavior was observed. A shear rheological model based on primary laboratory data is proposed for concentrated contact lubrication. The model is a Maxwell model modified with a limiting shear stress. Three material properties are required: low shear stress viscosity, limiting elastic shear modulus, and the limiting shear stress the material can withstand. All three are functions of temperature and pressure. In applying the model to EHD contacts the predicted response possesses the characteristics expected from several experiments reported in the literature.

Bair, S.↗

A rheological model for elastohydrodynamic contacts based on primary laboratory data

A shear rheological model based on primary laboratory data is proposed for concentrated contact lubrication. The model is a Maxwell model modified with a limiting shear stress. Three material properties are required: Low shear stress viscosity, limiting elastic shear modulus, and the limiting shear stress the material can withstand. All three are functions of temperature and pressure. In applying the model to EHD contacts the predicted response possesses the characteristics expected from several experiments reported in the literature and, in one specific case where direct comparison could be made, good numerical agreement is shown.

Bair, S.↗

Direction of crack growth in fibrous composites

A model for predicting the direction of crack growth in resin matrix composite materials is presented. The model is based upon the normal stress and the anisotropic tensile strength on arbitrary planes about the tip of a crack. The model is incorporated into a finite element solution which predicts energy release rates in addition to the direction of crack growth. Results are obtained for cracks in unidirectional off-axis slotted tensile coupons. Comparisons are made with other theories and experimental results.

Buczek, M. B.↗

The Effect of Grain Boundary Facet Junctions on Segregation and Embrittlement

Junctions are discontinuities in flat grain boundaries that arise in all polycrystalline materials and are thought to play important roles in the response of a grain boundary network to thermal and mechanical loads. A key open question concerns the mechanisms by which solute segregation to junctions impacts properties of the grain boundary. Here, in this work, we investigate the influence of grain boundary facet junctions on solute embrittlement, and we present an analytical model that uses the hydrostatic stress field contributed by dislocations at multiple junctions to describe these effects. Specifically, we study junctions between {112} facets of various lengths in Au $\langle111\rangle$ Σ3 tilt grain boundaries. Copper and silver solutes are employed to determine if the effect of junctions on solute segregation and embrittlement is dependent on size relative to the host. Combined, atomistic simulation data and the analytical model show that Cu and Ag have opposite segregation responses to junctions due to the sign of the hydrostatic stress field induced by junctions. However, a positive shift in the embrittling potency is computed near junctions regardless of solute type or the stress state of the segregation site. Hence, for the conditions studied, junctions consistently shift the energetic landscape towards embrittlement.

36 MATERIALS SCIENCE↗

A review of fracture mechanics life technology

Lifetime prediction technology for structural components subjected to cyclic loads is examined. The central objectives of the project are: (1) to report the current state of the art, and (2) recommend future development of fracture mechanics-based analytical tools for modeling subcritical fatigue crack growth in structures. Of special interest is the ability to apply these tools to practical engineering problems and the developmental steps necessary to bring vital technologies to this stage. The authors conducted a survey of published literature and numerous discussions with experts in the field of fracture mechanics life technology. One of the key points made is that fracture mechanics analyses of crack growth often involve consideration of fatigue and fracture under extreme conditions. Therefore, inaccuracies in predicting component lifetime will be dominated by inaccuracies in environment and fatigue crack growth relations, stress intensity factor solutions, and methods used to model given loads and stresses. Suggestions made for reducing these inaccuracies include development of improved models of subcritical crack growth, research efforts aimed at better characterizing residual and assembly stresses that can be introduced during fabrication, and more widespread and uniform use of the best existing methods.

Besuner, P. M.↗

A multi-omic characterization of the physiological responses to salt stress in Scenedesmus obliquus UTEX393

Scenedesmus obliquus UTEX393 is a promising microalgal candidate for sustainable biomanufacturing but its limited halotolerance hinders large-scale cultivation in saline environments. To investigate the molecular basis of salt stress responses, we conducted a comprehensive multi-omic analysis integrating genomics, transcriptomics, proteomics, lipidomics, metabolomics, and DNA affinity purification sequencing (DAP-seq). An improved nuclear genome assembly and annotation yielded 19,017 gene models and a 97% BUSCO completeness score, enabling construction of a genome-scale metabolic model. Comparing 15 ppt salinity stress to 5 ppt control, growth and productivity were significantly reduced, accompanied by widespread transcriptomic and proteomic changes. Transcriptomic analysis revealed downregulation of photosynthetic machinery and energy conservation genes, and upregulation of stress-responsive elements such as expansins, flavodoxins, and osmoprotectants. Lipidomic profiling showed accumulation of triacylglycerols (TAGs) and degradation of galactosyl lipids, consistent with a shift toward lipid biosynthesis to mitigate redox imbalance. Depletion of key polar metabolites and branched-chain amino acids suggested a rerouting of central carbon metabolism under stress. DAP-seq identified key transcription factors, including LHY1 and SPL12, that target central metabolic enzymes involved in redox balancing, such as glyceraldehyde-3-phosphate dehydrogenase (GAPDH) and malate dehydrogenase (MDH). These findings establish a regulatory-metabolic framework linking redox stress to lipid accumulation and reveal potential engineering targets to enhance salt tolerance. Overall, the multi-omic analysis supports the “overflow” hypothesis, where impaired photosynthesis results in excess reducing equivalents being diverted into TAG synthesis and highlights transcriptional regulators as candidates for improving algal robustness in brackish environments.

09 BIOMASS FUELS↗

Kinetic study of strong shock waves in fully ionized plasmas

Fully kinetic simulations are used in this work to study strong shock waves in fully ionized plasmas for charge state 𝑍 ranging from 1 to 18. The ion stress tensor amplitude agrees well with classical predictions within the compression layer; however, its spatial structure is noticeably shaped by nonlocal transport effects. The electron stress tensor remains significantly smaller than that of the ions for all values of 𝑍 considered. Ion overheating in the compression layer is observed to scale approximately linearly with 𝑍. Both findings diverge from hydrodynamic models based on classical electron stress formulations. In conclusion, the electrons exhibit strong nonlocal behavior in the compression layer, with Knudsen numbers approaching unity for 𝑍 ≥ 6.

Physics - Plasma physics↗

Load distributions in photoeleastic bolted-joint models

An attempt is made to study the stresses in multiple-bolt connectors, focusing on the stress distribution in a two-pin connector, the two pins being in line and in parallel with the direction of the applied load. The photoelastic modeling approach with two-dimensional transmission photoelasticity is used. The joint models and model fringe patterns are discussed, with special attention given to the existence of a photoelastic isotropic point and to the separation of stresses.

Hyer, M. W.↗