Coordination and establishment of centralized facilities and services for the University of Alaska ERTS survey of the Alaskan environment
There are no author-identified significant results in this report.
SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
There are no author-identified significant results in this report.
A comparison of prints from ERTS photography revealed significant differences in the image quality produced at GSFC, the EROS facility at Sioux Falls, and Eastman Kodak in Rochester. Based on this survey photographic quality was improved significantly at Sioux Falls, and improvements were suggested for optical and contact printers at the GSFC. Based on a test in which 365 meters of Eastman Electron Recording Film (ESTAR Base) SO-438 were processed the 1-sigma variation in process control from all sources is about + or - 0.04 at a density of 1.0. Variations from film and from processing were approximately equal contributors to the overall tolerance. Distortion produced by the Kodak Colorado printer at GSFC covers a range of about 0.04%, a small value compared to that caused by other factors in the ERTS system. The edge fringing inherent in the color film materials used at GSFC also seems to be a small factor in the unsharpness of ERTS color prints. MTF and granularity measurements were made on processed film samples supplied by GSFC. MTF values were above 0.70 out to 42 cycles/mm for all stages of contact printing in the ERTS system.
Proposed supporting studies for the Apollo 17 UV spectrometer include analyses of existing data and theories to construct lunar atmosphere models; acquisition of information on UV albedo of moon; engineering performance data for prototype Apollo 17 UV spectrometer; UV absolute calibration; and data reduction program interface with lunar atmosphere analysis program.
Forty-three compounds were formulated and tested for physical properties and hydrazine compatibility. Variables introduced include silicon dioxide filler loading level and particle size. Both butyl and ethylene-propylene rubbers were employed as well as various vulcanization systems. The data showed that compounds containing butyl and butyl blended with ethylene propylene could not be distinguished from ethylene propylene alone as far as chemical properties were concerned. A trend noted was that a filler level with higher silicon dioxide loading exhibited better hydrazine compatibility. Particle size variation did not show any consistent trends. Any of the vulcanization systems employed appeared to be satisfactory. A refined technique for dissolving aluminum cores from EPT-10 bladders was also tested.
The work performed for 12 tasks in the development of planetary quarantine measures is reported. P(st) analysis is discussed along with the early Teflon strip experiment analysis.
There are no author-identified significant results in this report.
The author has identified the following significant results. The objective of this project is to provide a focus for the entire University of Alaska ERTS-1 effort (12 projects covering 10 disciplines and involving 8 research institutes and science departments). Activities have been concentrated on the implementation of the project's three primary functions: (1) coordination and management of the U of A ERTS-1 program, including management of the flow of data and data products; (2) acquisition, installation, test, operation, and maintanence of centralized facilities for processing ERTS-1, aircraft, and ground truth data; and (3) development of photographic and digital techniques for processing and interpreting ERTS-1 and aircraft data. With minor exceptions these three functions are now well-established and working smoothly.
The project to evaluate thermal sterilization for unmanned landers is reported. A temperature controlled oven with a nitrogen gas supply containing a known concentration of water is discussed. The studies show that bacillus lentus, bacillus brevis, bacillus coagulans, atypical bacillus spp., and actinomycete are isolated heat survivors. The thermal resistance is given for naturally occurring airborne bacterial spores collected on exposed teflon ribbons.
There are no author-identified significant results in this report.
Planetary quarantine requirements and parameters are evaluated for their effects upon automated spacecraft flights data describing the heat resistance of naturally occuring microorganisms and sterilization requirements are analyzed and a possible method for assessment of these data is developed. Pertinent data from planetary mission microbial contamination logs are compiled and maintained in the quarantine document system.
There are no author-identified significant results in this report.
There are no author-identified significant results in this report.
Evaluations of several sets of test data which show a normal amount of variability in gamma and Dmax on KODAK Aerial Duplicating Film (ESTAR Base) SO-467 are reported. Kodak is now furnishing to engineers at GSFC a full set of test data for each coating of SO-467 film. Glass-enclosed sensitometer step tablets which are being made for the Herrnfeld instrument at GSFC are discussed. These tablets include a gray scale and uniformity check areas as well as tribar resolution patterns imaged in a durable chromium layer. It is recommended that the Sioux Falls EDC procure four new enlarging printers and study the value and economics of a system for printer automation based on edge coding.
The selection of a material for high volume, low cost gears requires careful consideration of all the requirements and the processes used to manufacture the gears. The wrong choice in material selection could very well mean the difference between success and failure. A summary of the cost that might be expected for different materials and processes is presented; it can be seen that the cost can span nearly three order of magnitudes from the molded plastic gear to the machined gear with stamped and powder metal gears falling in between these extremes.
An exercise program was initiated in a federal agency to assess the feasibility of such a program, and to identify the factors that influenced joining, adherence to, and effectiveness of the program. The program was utilized by 237 of the 998 eligible federal employees; mean attendance rate was 1.3 days/week. Those who volunteered perceived a need for increased physical activity, believed they had sufficient time to participate and derived subjective as well as objective benefits. Significant improvements were found in heart rate response to the standard exercise test, body weight, skinfold measurements and triglyceride levels.
In a preliminary investigation into the feasibility of establishing a data center for earth physics, 12 disciplines were considered for inclusion. Estimation of the size of the data base for each indicated a need for storage of approximately 10 to the 10th power characters. The computer-based system deemed most worthy of further investigation was the interactive concept with remote-terminal access. Users are divided into three classes according to how they would access information: with no terminal, with an interactive terminal, and with a multidevice terminal. All these users can be served by the same center without any particular difficulty, but the real benefactor is the user with an interactive terminal, because he can compile, debug, and run programs in one continuous session. Final points stressed are multiprogramming for dynamic resource sharing, hardware modularity for future expansion, and information protection for such a large community of users. It is concluded that a survey should be conducted to gather more information from the potential users of such a system, and that a pilot project should be developed at some location where both earth-physics research and data-processing capabilities already exist.
An overview of the state of the art in international space transportation systems, covering current launch vehicles, the space shuttle system, and the related aspects of IR astronomy, space physics, and space biology. A phase-over from expendable vehicles to a shuttle-based reusable space transportation system is visualized in 1980.
Discussion of cooperative arrangements and agreements among NASA, the Department of Commerce, and other governmental agencies in developing and operating meteorological satellite systems. The development of present interagency agreements and their conditions are discussed along with differences from the usual NASA program introduced by the supplier-client relationship between NASA and NOAA (National Oceanic and Atmospheric Administration).