Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “RAMAN EFFECT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,639 records · Page 91

Temperature-induced hexagonal–orthorhombic phase transition in lutetium ferrite nanoparticles

The x-ray diffraction, Raman, and infrared spectroscopies and magnetic measurements were used to explore the correlated changes of the structure, lattice dynamics, and magnetic properties of the LuFeO3 nanoparticles, which appear in dependence on their sintering temperature. We revealed a gradual substitution of the hexagonal phase by the orthorhombic phase in the nanoparticles, with sintering temperature increasing from 700 to 1100 °C. The origin and stability of the hexagonal phase in the LuFeO3 nanoparticles are of the special interest, because the nanoparticles in the phase can be a room-temperature multiferroic with a weak ferromagnetic and pronounced structural and ferroelectric long-range ordering. The antiferromagnetic and nonpolar orthorhombic phase is more stable in the bulk LuFeO3. To define the ranges of the hexagonal phase stability, we determine the bulk and interface energy densities of different phases from the comparison of the Gibbs model with experimental results. Using effective parameters of the Gibbs model, we predict the influence of size effects and temperature on the structural and polar properties of the LuFeO3 nanoparticles. Analysis of the obtained results shows that the combination of the x-ray diffraction, Raman and infrared spectroscopies, magnetic measurements, and theoretical modeling of structural and polar properties allows us to establish the interplay between the phase composition, lattice dynamics, and multiferroic properties of the LuFeO3 nanoparticles prepared under different conditions.

Materials Science↗

Local Oscillations of Silicon–Silicon Bonds in Silicon Nitride

Raman spectra of films of nearly stoichiometric amorphous silicon nitride (a-Si{sub 3}N{sub 4}) reveal a contribution due to local oscillations of silicon–silicon (Si–Si) bonds. This observation directly confirms that the almost stoichiometric a-Si{sub 3}N{sub 4} contains Si–Si bonds, which, according to theoretical predictions, act as electron and hole traps that are responsible for the memory effect in Si{sub 3}N{sub 4}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ion irradiation induced strain and structural changes in LiTaO 3 perovskite

LiTaO 3 crystals irradiated with 3 MeV and 1.162 GeV Au ions were studied by single crystal x-ray diffraction and Raman scattering measurements. The maximum lattice strains after 3 MeV Au ion irradiation to a fluence of 1.2 × 10 13 cm -2 were 1.2% and 0.6% along the c- and a-/b-axes, respectively. Two effects were observed in 1.162 GeV Au ion irradiated samples: (i) the (0006) and (1120) Bragg peaks were split into doublets, which suggested a subtle structural change due to slight modification of chemical composition; and (ii) the pre-damaged 1.2% lattice strain along the c-axis was relaxed to 0.9% after subsequent irradiation with 1.162 GeV Au ions, while relaxation along the a- or b-axis was not obvious. A distinct change in the Raman spectrum of the <0001> oriented LiTaO 3 crystals was observed after 1.162 GeV Au ion irradiation, but no obvious change was observed in the <1120> oriented samples or in 3 MeV Au ion irradiated samples. Strain and structural changes in crystalline LiTaO3, with or without pre-existing defects, upon ion irradiation are delineated in its responding to inelastic ionization and elastic nuclear collisions.

36 MATERIALS SCIENCE↗

Effects of B{sub 2}O{sub 3} on Crystallization, Structure, and Heat Transfer of CaO-Al{sub 2}O{sub 3}-Based Mold Fluxes

The reaction between traditional CaO-SiO{sub 2}-based mold fluxes and high-Al steel inevitably changes flux composition, and, consequently, flux properties. This problem can be mitigated by using CaO-Al{sub 2}O{sub 3}-based mold fluxes. To maintain appropriate melting properties, CaO-Al{sub 2}O{sub 3}-based mold fluxes contain B{sub 2}O{sub 3}, which is an effective fluxing agent that decreases the liquidus temperature. In this article, the effects of B{sub 2}O{sub 3} on crystallization behavior, structure, and heat transfer of CaO-Al{sub 2}O{sub 3}-based mold fluxes were studied using single/double hot thermocouple technique, Raman spectroscopy, and infrared emitter technique. The increase of B{sub 2}O{sub 3} content from 7.6 to 13.1 mass pct suppressed the crystallization tendency of mold fluxes in continuous cooling experiments and isothermal experiments conducted over 1273 K (1000 °C). The isothermal crystallization below 1273 K (1000 °C) was also inhibited when B{sub 2}O{sub 3} content increased from 7.6 to 9.6 mass pct; but a further increase of B{sub 2}O{sub 3} content to 13.1 mass pct did not show a visible effect on the crystallization tendency. The increase of B{sub 2}O{sub 3} content from 9.6 to 13.1 mass pct improved the heat fluxes under an incident thermal radiation of 1.6 MW/m{sup 2}; however, the increase of B{sub 2}O{sub 3} content from 7.6 to 9.6 mass pct slightly decreased the heat transfer rate. Crystallization of fluxes and heat transfer were discussed in relation to flux structure.

36 MATERIALS SCIENCE↗

Facile synthesis of ZnO nanostructures and investigation of structural and optical properties

ZnO nanostructures were synthesized by chemical bath deposition method, using zinc nitrate [Zn(NO{sub 3}){sub 2}] and hexa-methylene-tetra-amine [(HMT),C(H{sub 2}){sub 6}N{sub 4}] as precursors. Controlled size and shape evolution of ZnO nanostructures were achieved by changing the HMT concentration from 0.025 M to 0.1 M, whereas Zn(NO{sub 3}){sub 2} concentration kept constant. X-ray diffraction (XRD) and Raman study confirmed the formation of single crystalline, hexagonal wurtzite ZnO structure. Sharp peaks in Raman spectra, corresponding to E{sub 2}(low) and E{sub 2}(high) referred to wurtzite structure with higher order of crystallinity. Transmission electron microscopy (TEM) revealed that the shape and size of the nanostructures reduced, with increasing concentration of HMT. Further, effect of structure's size was observed in the band gap (shift). Photoluminescence study showed two peaks at ∼ 380 nm and ∼ 540 nm corresponding to the band to band transition and defect transitions. Modifications of properties are explained in detail on the basis of shape and size change of the structures and possible mechanism is discussed. - Highlights: • ZnO nanostructures were synthesized by chemical bath deposition method. • Particle’s shape and sizes were controlled by varying the HMT concentrations. • Effect of particle’s sizes was observed in the band gap (shift) and photoluminescence. • HMT is an effective suppressor of ZnO directional growth. • Shape evolution of ZnO particles can be tailored by varying the HMT concentrations.

36 MATERIALS SCIENCE↗

Nonlinear post-compression to sub-20 fs using a single-stage multipass cell filled with ambient air

Noble gas-filled multipass cells have proven to be very effective in compressing high-energy, hundreds-of-femtoseconds pulses down to tens of femtoseconds. Molecular gases can be an attractive alternative to noble gases since they provide additional Raman nonlinearities that can be much stronger than the electronic Kerr nonlinearity and can therefore enable more spectral broadening and shorter compressed pulses. Air at atmospheric pressure offers molecular gases in their simplest format, with both easy access and no costs for implementing a gas chamber. Here we demonstrate a single-stage, air-filled multipass cell that spectrally broadens 145- μ J, 185-fs pulses with >90% throughput, with a small fraction of the output compressed to sub-20 fs using a prism-pair compressor. The multipass cell uses standard broadband mirrors without dispersion engineering and ambient air as the nonlinear medium, making it the simplest and most cost-effective solution for generating few-cycle femtosecond pulses.

47 OTHER INSTRUMENTATION↗

Residual stress and damage-induced critical fracture on CO2 laser treated fused silica

Localized damage repair and polishing of silica-based optics using mid- and far-IR CO{sub 2} lasers has been shown to be an effective method for increasing optical damage threshold in the UV. However, it is known that CO{sub 2} laser heating of silicate surfaces can lead to a level of residual stress capable of causing critical fracture either during or after laser treatment. Sufficient control of the surface temperature as a function of time and position is therefore required to limit this residual stress to an acceptable level to avoid critical fracture. In this work they present the results of 351 nm, 3 ns Gaussian damage growth experiments within regions of varying residual stress caused by prior CO{sub 2} laser exposures. Thermally stressed regions were non-destructively characterized using polarimetry and confocal Raman microscopy to measure the stress induced birefringence and fictive temperature respectively. For 1 {approx} 40s square pulse CO{sub 2} laser exposures created over 0.5-1.25 kW/cm{sup 2} with a 1-3 mm 1/e{sup 2} diameter beam (T{sub max} {approx} 1500-3000 K), the critical damage site size leading to fracture increases weakly with peak temperature, but shows a stronger dependence on cooling rate, as predicted by finite element hydrodynamics simulations. Confocal micro-Raman was used to probe structural changes to the glass over different thermal histories and indicated a maximum fictive temperature of 1900K for T{sub max} {ge} 2000 K. The effect of cooling rate on fictive temperature caused by CO{sub 2} laser heating are consistent with finite element calculations based on a Tool-Narayanaswamy relaxation model.

42 ENGINEERING↗

Cation distribution in the Bi{sub 4-x}RE{sub x}Ti{sub 3}O{sub 12} (RE = La, Nd) solid solution and Curie temperature dependence

Bi{sub 4-x}RE{sub x}Ti{sub 3}O{sub 12} (RE = La, Nd) ferroelectric powders were prepared by a co-precipitation route. Raman spectroscopy and X-ray diffraction were employed to determine the crystal site of La{sup 3+} and Nd{sup 3+} as well as the effect of their addition on the crystal structure. It was found that La atoms were not only placed preferentially in pseudo-perovskite A sites for concentrations x {<=} 1.2 but also substituted for Bi{sup 3+} in (Bi{sub 2}O{sub 2}){sup 2+} layers for greater concentrations. A similar behavior was observed with the limit value x = 0.8 in case of Nd{sup 3+}. In solid solution La or Nd{sup 3+} ions diminish the distortions in the octahedron formed by oxygen atoms, so there is a tendency to undergo a transition in crystal symmetry from orthorhombic to tetragonal. Finally differential scanning calorimetry (DSC) shows a linear dependence of the Curie temperature (T{sub c}) when the amount of La{sup 3+} or Nd{sup 3+} was increased.

36 MATERIALS SCIENCE↗

Excited Rydberg states in MoSe 2 /WSe 2 heterostructures

The functional form of Coulomb interactions in the transition metal dichalcogenides (TDMs) and other van der Waals solids is critical to many of their unique properties, e.g. strongly-correlated electron states, superconductivity and emergent ferromagnetism. This paper presents measurements of key excitonic energy levels in MoSe 2 /WSe 2 heterostructures. These measurements are obtained from resonance Raman experiments on specific Raman peaks only observed at excited states of the excitons. This data is used to validate a model of the Coulomb potential in these structures which predicts the exciton energies to within ~5 meV. This model is used to determine the effect of heterostructure formation on the single-particle band gaps of the layers and will have a wide applicability in designing the next generation of more complex TDM structures.

Materials Science↗

Experimental evidence of zone-center optical phonon softening by accumulating holes in thin Ge

We discuss the impact of free carriers on the zone-center optical phonon frequency in germanium (Ge). By taking advantage of the Ge-on-insulator structure, we measured the Raman spectroscopy by applying back-gate bias. Phonon softening by accumulating holes in Ge film was clearly observed. This fact strongly suggests that the phonon softening in heavily-doped Ge is mainly attributed to the free carrier effect rather than the dopant atom counterpart. Furthermore, we propose that the free carrier effect on phonon softening is simply understandable from the viewpoint of covalent bonding modification by free carriers.

36 MATERIALS SCIENCE↗

Impact of Individual Structural Defects in GaAs Solar Cells: A Correlative and In Operando Investigation of Signatures, Structures, and Effects

Defects usually degrade device performance. Thus, many techniques and effort are devoted to studying semiconductor defects. However, it is rarely known: i) how individual defects affect device performance; ii) how the impact depends on the device operating conditions; iii) how the impact varies from one defect to another; and iv) how these variations are correlated to the microscopic-scale defect structure. To address these crucial questions, an array of correlative and spatially resolved techniques, including electroluminescence, photoluminescence, Raman, I–V characteristics, and high-resolution electron microscopy, are used to characterize dislocation defects in GaAs solar cells. Significantly, the study is carried out in a series mode and in operando. This approach provides quantitative and definitive correlation between the atomistic structure of defects and their explicit effects on device performance, thus giving unprecedented insight into defect physics.

dislocation defects↗

Vertically aligned crystalline silicon nanowires with controlled diameters for energy conversion applications: Experimental and theoretical insights

Vertically orientated single crystalline silicon nanowire (SiNW) arrays with controlled diameters are fabricated via a metal-assisted chemical etching method. The diameter of the fabricated nanowires is controlled by simply varying the etching time in HF/H{sub 2}O{sub 2} electrolytes. The fabricated SiNWs have diameters ranging from 117 to 650 nm and lengths from 8 to 18 μm. The optical measurements showed a significant difference in the reflectance/absorption of the SiNWs with different diameters, where the reflectance increases with increasing the diameter of the SiNWs. The SiNWs showed significant photoluminescence (PL) emission spectra with peaks lying between 380 and 670 nm. The PL intensity increases as the diameter increases and shows red shift for peaks at ∼670 nm. The increase or decrease of reflectivity is coincident with PL intensity at wavelength ∼660 nm. The x-ray diffraction patterns confirm the high crystallinity of the fabricated SiNWs. In addition, the Raman spectra showed a shift in the first order transverse band toward lower frequencies compared to that usually seen for c-Si. Finite difference time domain simulations have been performed to confirm the effect of change of diameter on the optical properties of the nanowires. The simulation results showed good agreement with the experimental results for the SiNWs of different diameters.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Enhanced Exciton-to-Trion Conversion by Proton Irradiation of Atomically Thin WS 2

Defect engineering of van der Waals semiconductors has been demonstrated as an effective approach to manipulate the structural and functional characteristics toward dynamic device controls, yet correlations between physical properties with defect evolution remain underexplored. Here, using proton irradiation, we observe an enhanced exciton-to-trion conversion of the atomically thin WS 2 . The altered excitonic states are closely correlated with nanopore induced atomic displacement, W nanoclusters, and zigzag edge terminations, verified by scanning transmission electron microscopy, photoluminescence, and Raman spectroscopy. Density functional theory calculation suggests that nanopores facilitate formation of in-gap states that act as sinks for free electrons to couple with excitons. The ion energy loss simulation predicts a dominating electron ionization effect upon proton irradiation, providing further evidence on band perturbations and nanopore formation without destroying the overall crystallinity. This study provides a route in tuning the excitonic properties of van der Waals semiconductors using an irradiation-based defect engineering approach.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

De Sitter diagrammar and the resummation of time

Light scalars in inflationary spacetimes suffer from logarithmic infrared divergences at every order in perturbation theory. This corresponds to the scalar field values in different Hubble patches undergoing a random walk of quantum fluctuations, leading to a simple toy “landscape” on superhorizon scales, in which we can explore questions relevant to eternal inflation. However, for a sufficiently long period of inflation, the infrared divergences appear to spoil computability. Some form of renormalization group approach is thus motivated to resum the log divergences of conformal time. Such a resummation may provide insight into De Sitter holography. We present here a novel diagrammatic analysis of these infrared divergences and their resummation. Basic graph theory observations and momen- tum power counting for the in-in propagators allow a simple and insightful determination of the leading-log contributions. One thus sees diagrammatically how the superhorizon sector consists of a semiclassical theory with quantum noise evolved by a first-order, interacting classical equation of motion. This rigorously leads to the “Stochastic Inflation” ansatz developed by Starobinsky to cure the scalar infrared pathology nonperturbatively. Our approach is a controlled approximation of the underlying quantum field theory and is systematically improvable.

79 ASTRONOMY AND ASTROPHYSICS↗

Effects of hydrogen atmosphere on pulsed-DC sputtered nanocrystalline Si:H films

Highlights: ► Nanocrystalline silicon films were made by pulsed-DC magnetron sputtering. ► A threshold hydrogen concentration was required. ► High defect density due to ion bombardment and oxygen contamination caused low conductivity. -- Abstract: Hydrogenated nanocrystalline silicon (nc-Si:H) films were prepared by a pulsed-DC magnetron sputtering method under an atmosphere of hydrogen/argon mixture. The effects of hydrogen concentration on the structural and electrical properties of the films were systematically investigated using grazing incidence X-ray diffraction (GIXRD), Raman spectroscopy, and conductivity measurement. A threshold hydrogen concentration of about 70% was found necessary before any crystallinity was detectable. The deposition rate decreased monotonically with increasing hydrogen concentration, while the conductivity varied with crystallite size. The abnormally low conductivity level of these nc-Si:H films was due to the extraordinarily high defect density, which was attributed both to the enhanced ion bombardment from the pulsed-DC plasma and to the oxygen contamination from the target.

36 MATERIALS SCIENCE↗

Optical-Vibrational Properties of the Cs 2 SnX 6 (X = Cl, Br, I) Defect Perovskites and Hole-Transport Efficiency in Dye-Sensitized Solar Cells

We report the vibrational and optical properties of the ‘defect’ perovskites Cs 2 SnX 6 (X = Cl, Br, I) as well as their use as hole-transporting materials (HTMs) in solar cells. All three air-stable compounds were characterized using powder X-ray diffraction and Rietveld refinement. Far-IR reflectance, Raman, and UV–vis spectroscopy as well as electronic band structure calculations show that the compounds are direct band gap semiconductors with a pronounced effect of the halogen atom on the size of the energy gap and the vibrational frequencies. Scanning electron microscopy and atomic force microscopy confirmed that the morphology of the perovskite films deposited from $N,N$-dimethylformamide solutions on TiO 2 substrates also strongly depends on the chemical composition of the materials. The Cs 2 SnX 6 perovskites were introduced as hole-transporting materials in dye-sensitized solar cells, based on mesoporous titania electrodes sensitized with various organic and metal–organic dyes. The solar cells based on Cs 2 SnI 6 HTM and the Z907 dye performed best with a maximum power conversion efficiency of 4.23% at 1 sun illumination. The higher performance of Cs 2 SnI 6 is attributed to efficient charge transport in the bulk material and hole extraction at the perovskite-Pt interface, as evidenced by electrochemical impedance spectroscopy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Phase separation in SiGe nanocrystals embedded in SiO{sub 2} matrix during high temperature annealing

SiGe nanocrystals have been formed in SiO{sub 2} matrix by cosputtering Si, Ge, and SiO{sub 2} independently on Si substrate. Effects of the annealing time and temperature on structural and compositional properties are studied by transmission electron microscopy, x-ray diffraction (XRD), and Raman spectroscopy measurements. It is observed that Ge-rich Si{sub (1-x)}Ge{sub x} nanocrystals do not hold their compositional uniformity when annealed at high temperatures for enough long time. A segregation process leading to separation of Ge and Si atoms from each other takes place. This process has been evidenced by a double peak formation in the XRD and Raman spectra. We attributed this phase separation to the differences in atomic size, surface energy, and surface diffusion disparity between Si and Ge atoms leading to the formation of nonhomogenous structure consist of a Si-rich SiGe core covered by a Ge-rich SiGe shell. This experimental observation is consistent with the result of reported theoretical and simulation methods.

36 MATERIALS SCIENCE↗