Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Phase evolution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,639 records · Page 91

Evolution of the electronic structure in Ta 2 NiSe 5 across the structural transition revealed by resonant inelastic x-ray scattering

We utilized high-energy-resolution resonant inelastic X-ray scattering (RIXS) at both the Ta and Ni L 3 -edges to map out element-specific particle-hole excitations in Ta 2 NiSe 5 across the phase transition. Our results reveal a momentum dependent gap-like feature in the low energy spectrum, which agrees well with the band gap in element-specific joint density of states calculations based on ab initio estimates of the electronic structure in both the low temperature monoclinic and the high temperature orthorhombic structure. Below T c , the RIXS energy-momentum map shows a minimal gap at the Brillouin zone center (~0.16 eV), conforming that Ta 2 NiSe 5 possesses a direct band gap in its low temperature ground state. However, inside the gap, no signature of anticipated collective modes with an energy scale comparable to the gap size can be identified. Upon increasing the temperature to above T c , whereas the gap at the zone center closes, the RIXS map at finite momenta still possesses the gross features of the low temperature map, suggesting a substantial mixing between the Ta and Ni orbits in the conduction and valence bands, which does not change substantially across the phase transition. Our experimental observations and comparison to the theoretical calculations lend further support that the phase transition and the corresponding gap opening in Ta 2 NiSe 5 is largely structural by nature with possible minor contribution from the putative exciton condensate.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The Evolution of Randomized Clinical Trial Designs to Assess Therapeutics in Alzheimer Disease

Importance The success of recent randomized clinical trials (RCTs) for Alzheimer disease (AD), particularly those focusing on anti-amyloid therapies, has been discussed at length. However, the evolution of RCT design features for AD that preceded this success remain underexplored. Objective To describe temporal changes in the features of RCT design for interventions in AD. Evidence Review PubMed, Scopus, and Web of Science databases were searched in January 2025 for phase 2 and 3 AD RCTs published between January 1992 and December 2024. RCTs that investigated an intervention for AD, with a placebo or standard-of-care control group, were included. Four assessors independently reviewed full-text articles to capture study characteristics. Main Outcomes and Measures The number of participants and the duration of RCTs as well as the target population, outcomes, and funding were extracted from published reports. These features were analyzed with respect to time using linear regression and χ 2 analyses. Results The study included 203 RCTs with 79 589 participants testing interventions in AD. From 1992 to 2024, the mean sample size increased by 464% for phase 2 RCTs (from 42 to 237), and 50% for phase 3 RCTs (from 632 to 951), while the mean trial duration increased by 188% (from 16 to 46 weeks) for phase 2, and 256% (from 20 to 71 weeks) for phase 3 RCTs. This longer duration of RCTs may be partially attributed by a greater share of disease-modifying rather than symptomatic treatments. Similarly, more recent trials required AD biomarker evidence for enrollment (from 1 of 36 [2.7%] before 2006 to 40 of 76 [52.6%] since 2019). A substantial difference in the type of therapeutics researched was observed, with anti-amyloid and anti-tau RCTs being more likely to be funded by the pharmaceutical industry compared with neurotransmitter or other RCTs (anti-amyloid or anti-tau, 68 of 71 [95.8%]; neurotransmitter, 52 of 69 [77.6%]; other, 33 of 52 [63.5%]). RCT transparency improved, with more frequent data accessibility statements, registered reports, and better reporting on race and ethnicity. Conclusions and Relevance This methodology research of AD RCTs highlights substantial changes in key features of AD clinical trials from 1992 to 2024. AD RCTs have become larger and longer, such that they are powered to detect smaller clinical differences. The increased sample sizes and duration should enable the detection of smaller and more slowly occurring outcomes, which may lead to successful RCTs of therapies with slower and more subtle efficacy.

General & Internal Medicine↗

A theoretical study of the upper bound of surface elevation variance in the Phillips initial stage during wind-wave generation

The resonance mechanism in the initial of wind-wave generation proposed by Phillips is a foundation of wind-wave generation theory, but a precise theoretical quantification of wave energy growth in this initial stage has not been obtained yet after more than six decades of research. In this study, we aim to address this knowledge gap by developing an analytical approach based on a novel complex analysis method to theoretically investigate the temporal evolution of the wave energy in the Phillips initial stage. We quantitatively derive and analyse the growth behaviour of the surface wave energy and obtain an analytical solution for its upper bound. Our result highlights the crucial effects of surface tension. Because the phase velocity of gravity–capillary waves has a minimal value at a critical wavenumber, gravity–capillary waves and gravity waves (which neglect surface tension) exhibit distinct resonance curve properties and wave energy growth behaviours. For gravity waves, the resonance curve extends indefinitely; for gravity–capillary waves, it either forms a finite-length curve or does not exist, depending on the wind speed. The leading-order term of the upper-bound solution of the energy of gravity waves increases linearly over time, while for gravity–capillary waves, the term increases linearly over time under strong wind conditions but remains finite under weak wind conditions. This theoretical study provides an analytical framework for the generation of wind-waves in the Phillips initial stage, which may inspire further theoretical, numerical and experimental research.

58 GEOSCIENCES↗

Neural network kinetics for exploring diffusion multiplicity and chemical ordering in compositionally complex materials

Diffusion involving atom transport from one location to another governs many important processes and behaviors such as precipitation and phase nucleation. The inherent chemical complexity in compositionally complex materials poses challenges for modeling atomic diffusion and the resulting formation of chemically ordered structures. Here, we introduce a neural network kinetics (NNK) scheme that predicts and simulates diffusion-induced chemical and structural evolution in complex concentrated chemical environments. The framework is grounded on efficient on-lattice structure and chemistry representation combined with artificial neural networks, enabling precise prediction of all path-dependent migration barriers and individual atom jumps. To demonstrate the method, we study the temperature-dependent local chemical ordering in a refractory NbMoTa alloy and reveal a critical temperature at which the B2 order reaches a maximum. The atomic jump randomness map exhibits the highest diffusion heterogeneity (multiplicity) in the vicinity of this characteristic temperature, which is closely related to chemical ordering and B2 structure formation. The scalable NNK framework provides a promising new avenue to exploring diffusion-related properties in the vast compositional space within which extraordinary properties are hidden.

36 MATERIALS SCIENCE↗

Determining population densities in bimodal micellar solutions using contrast-variation small angle neutron scattering

Self-assembly of amphiphilic polymers in water is of fundamental and practical importance. Significant amounts of free unimers and associated micellar aggregates often coexist over a wide range of phase regions. The thermodynamic and kinetic properties of the microphase separation are closely related to the relative population density of unimers and micelles. Although the scattering technique has been employed to identify the structure of micellar aggregates as well as their time-evolution, the determination of the population ratio of micelles to unimers remains a challenging problem due to their difference in scattering power. In this work, using small-angle neutron scattering (SANS), we present a comprehensive structural study of amphiphilic n-dodecyl-PNIPAm polymers, which shows a bimodal size distribution in water. By adjusting the deuterium/hydrogen ratio of water, the intra-micellar polymer and water distributions are obtained from the SANS spectra. The micellar size and number density are further determined, and the population densities of micelles and unimers are calculated to quantitatively address the degree of micellization at different temperatures. Our method can be used to provide an in-depth insight into the solution properties of microphase separation, which are present in many amphiphilic systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Advancements in modeling fuel pulverization and cladding behavior during a LOCA

During a loss-of-coolant accident (LOCA), it is possible for nuclear fuel rods to undergo a three-step process known as fuel fragmentation, relocation, and dispersal (FFRD). The chance of FFRD occurring increases as the fuel burnup increases. To support the nuclear industry's desire to increase the discharge burnup of nuclear fuels in light-water reactors (LWRs), it is imperative to understand the mechanisms driving the evolution of FFRD. In this work, a multiscale modeling approach is used to garner insight into underlying mechanisms leading to the fine fragmentation (also known as pulverization) of nuclear fuel during a LOCA. This report includes a summary of the atomistic and phase-field studies to develop a new pulverization criterion for use in the engineering-scale Bison fuel performance code. Details are also provided on cladding model improvements related to hydrogen/hydride embrittlement and damage and anisotropic thermal creep. The new models are used on the existing integral and separate effects LOCA validation cases available in Bison.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Topological terms with qubit regularization and relativistic quantum circuits

Qubit regularization provides a rich framework to explore quantum field theories. The freedom to choose how the important symmetries of the theory are embedded in the qubit regularization scheme allows us to construct new lattice models with rich phase diagrams. Some of the phases can contain topological terms which lead to critical phases. In this work we introduce and study the SU(3)-F qubit regularization scheme to embed the SO(3) spin-symmetry. We argue that qubit models in this regularization scheme contain several phases including a critical phase which describes the k = 1 Wess-Zumino-Witten (WZW) conformal field theory (CFT) at long distances, and two massive phases one of which is trvially gapped and the other which breaks the lattice translation symmetry. We construct a simple space-time Euclidean lattice model with a single coupling U and study it using the Monte Carlo method. We show the model has a critical phase at small U and a trivially massive phase at large U with a first order transition separating the two. Another feature of our model is that it is symmetric under space-time rotations, which means the temporal and spatial lattice spacing are connected to each other. The unitary time evolution operator obtained by a Wick rotation of the transfer matrix of our model can help us compute the physics of the k = 1 WZW CFT in real time without the need for tuning the temporal lattice spacing to zero. We use this idea to introduce the concept of a relativistic quantum circuit on a discrete space-time lattice.

Bhattacharya, Tanmoy↗

An extended/generalized phase-field finite element method for crack growth with global-local enrichment

In this paper, an extended/generalized finite element method (XFEM/GFEM) for simulating quasistatic crack growth based on a phase-field method is presented. The method relies on approximations to solutions associated with two different scales: a global scale, that is, structural and discretized with a coarse mesh, and a local scale encapsulating the fractured region, that is, discretized with a fine mesh. A stable XFEM/GFEM is employed to embed the displacement and damage fields at the global scale. The proposed method accommodates approximation spaces that evolve between load steps, while preserving a fixed background mesh for the structural problem. In addition, a prediction-correction algorithm is employed to facilitate the dynamic evolution of the confined crack regions within a load step. Several numerical examples of benchmark problems in two- and three-dimensional quasistatic fracture are provided to demonstrate the approach.

multiscale↗

Segregation behavior and phase instability of Eurofer97 after neutron irradiation to 72 dpa

Here, a reduced activation ferritic/martensitic steel, Eurofer97, was neutron irradiated in the vicinity of 300 °C in the High Flux Isotope Reactor (HFIR) up to 72 dpa. Advanced analytical scanning transmission electron microscopy and conventional transmission electron microscopy were applied to investigate the radiation-induced segregation and phase instability behavior after neutron irradiation. Amorphization was observed in M 23 C 6 carbides. Cr-rich clusters were seen within the matrix, near the lath boundaries and close to the M 23 C 6 carbides. Cr enrichment and Fe depletion were detected at both prior austenite grain boundaries and lath boundaries, despite different segregation magnitude. In addition, the enrichment of Ni, the depletion of V, and tiny cavities (presumably helium bubbles) are also found at lath boundaries. This work interrogates the evolution of microstructures after neutron irradiation, which provides detailed understanding on the microstructural aspects controlling the mechanical integrity of Eurofer97 under high-dose neutron damage.

36 MATERIALS SCIENCE↗

Evolution of magnetic bubble domains in the uniaxial ferromaget CeRu 2 Ga 2 B inferred from the Hall effect and ac magnetic susceptibility

We study the Hall effect, AC magnetic susceptibility (χ ac ), and magnetic force microscopy of the uniaxial ferromagnet CeRu 2 Ga 2 B with a centrosymmetric crystal structure. We observe a finite topological Hall effect (THE) within the ordered phase, before the magnetization is polarized by applied field. By comparing the field dependences of the area fraction of the magnetic bubbles, the derivative of χ ac , and the THE signal, we deduce that the magnetic bubbles in CeRu 2 Ga 2 B evolve from the trivial to topological spin texture with field. Our findings enable the expansion of the search for magnetic materials hosting topological spin textures to include uniaxial ferromagnets and open a new possibility to tailor the topological spin texture.

AC magnetic susceptibility↗

Radiation-induced vacancy injection in heterogeneous multiphase materials

Understanding the synergy between corrosion and defect dynamics is a key consideration in the development of advanced materials for extreme environments. Here, we reveal a surprising phenomenon for the transport of point defects induced by irradiation in a heterogeneous multiphase structure of a metal and an oxide, similar to that formed under metal corrosion that takes place in most environments. Despite the confinement of the produced damage within the oxide, vacancies were injected into the unirradiated metal and coarsened with dose. Furthermore, the results show that the nature of the oxide layer dictates the defect evolution in the metal layer. This work reveals an interesting mechanism for point defect interactions in multiphase materials, with broad implications in many fields, while also emphasizing the complex coupling between corrosion and irradiation. Corrosion leads to the formation of multiphase materials, while irradiation enhances diffusion within the heterogeneous phases, which can impact corrosion rates.

36 MATERIALS SCIENCE↗

Sequence2Self: Self-supervised image sequence denoising of pixel-level spray breakup morphology

Optical imaging of fast and transient phenomena such as the turbulent breakup of liquid sprays exhibit low signal-to-noise ratios due to the limited illumination intensity relative to the short exposure time. Image denoising is required to facilitate physical studies over these data but is challenging due to the absence of clean ground-truths and the stringency of the denoising task (e.g., strong and complex noise, limited resolution, preserving physical fidelity), preventing supervised and existing un-/self-supervised deep learning methods. To this end, Sequence2Self (Seq2S) is proposed, an extension of Self2Self (S2S) to image sequences that leverages both the signal’s spatial and temporal correlation. Seq2S is demonstrated on time-resolved x-ray phase contrast imaging of liquid jet fuel sprays in a gas turbine combustor, which possesses all of challenges detailed above. Experiments are conducted across four fuels with different breakup morphology using various state-of-the-art methods. Overall, many of the methods failed and Seq2S was most successful: (1) Accurate spray structures were reconstructed with consistent evolution across frames void of artifacts. (2) The performance was robust, invariant to the hyperparameter choice. (3) Computational time is short and can be made eligible for real-time denoising. In particular, the images denoised by Seq2S showed spray droplet diameter distributions with near-zero Kullback–Leibler divergence (0.01 ± 0.01) to a cleaner reference, whereas the second best method yielded 0.06 ± 0.03. In conclusion, this suggests that Seq2S can be reliably used prior to subsequent quantitative spray analyses as it retains (if not, improves) the statistical physical properties of the data.

97 MATHEMATICS AND COMPUTING↗

Atomistic Insights of Irreversible Li + Intercalation in MnO 2 Electrode

Tunnel-structured MnO 2 represents open-framed electrode materials for reversible energy storage. Its wide application is limited by its poor cycling stability, whose structural origin is unclear. We tracked the structure evolution of β-MnO 2 upon Li + ion insertion/extraction by combining advanced in situ diagnostic tools at both electrode level (synchrotron X-ray scattering) and single-particle level (transmission electron microscopy). The instability is found to originate from a partially reversible phase transition between β-MnO 2 and orthorhombic LiMnO 2 upon lithiation, causing cycling capacity decay. Moreover, the MnO 2 /LiMnO 2 interface exhibits multiple arrow-headed disordered regions, which severely chop into the host and undermine its structural integrity. Our findings could account for the cycling instability of tunnel-structured materials, based on which future strategies should focus on tuning the charge transport kinetics toward performance enhancement.

25 ENERGY STORAGE↗

Implications of Underground Nuclear Explosion Cavity Evolution for Radioxenon Isotopic Composition

Abstract Isotopic ratios of radioxenons sampled in the atmosphere or subsurface can be used to verify the occurrence of an underground nuclear explosion (UNE). Differences in the half-lives of radioactive xenon precursors and their decay-chain networks produce different time-dependent concentration profiles of xenon isotopes allowing isotopic ratios to be used for tracking UNE histories including estimating the time of detonation. In this study, we explore the potential effects of post-detonation cavity processes: precipitation of iodine precursors, gas seepage, and prompt venting on radioxenon isotopic evolution which influences UNE histories. Simplified analytical models and closed-form solutions yielding a potentially idealized radioactive decay/ingrowth chain in a closed and well-mixed system typically have limited application by not including the partitioning of the radionuclide inventory between a gas phase and rock melt created by the detonation and by ignoring gas transport from the cavity to host rock or ground surface. In reality, either subsurface transport or prompt release that is principally responsible for gas signatures violates the closed-system (or batch-mode) assumption. A closed-form solution representing time-dependent source-term activities is extended by considering the cavity partitioning process, slow seepage, and/or prompt release of gases from the cavity and applied to realistic systems.

Sun, Yunwei (ORCID:0000000194801439)↗

Assessment of effective elastic constants of U-10Mo fuel: A multiscale modeling and homogenization study

The significant microstructural changes that U-Mo fuel undergoes during operation degrades its mechanical properties and structural integrity. Microstructural evolution entails the formation, evolution, and redistribution of porosity in conjunction with grain refinement. In the present paper, we employ numerical approaches to assess the impact of the various microstructural features—grains, nanoscale intragranular fission gas bubbles, and mesoscale intergranular voids—on the degradation of elastic constants. Phase-field microstructure models are combined with the asymptotic expansion homogenization technique in order to derive the effective elastic constants as a function of porosity and fission density. Here the results are verified and compared against theoretical bounds. Using this approach, elastic degradation in operating nuclear fuels can be quantified when the distributions of microstructural features are known.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

The complex circumstellar environment of supernova 2023ixf

The early evolution of a supernova (SN) can reveal information about the environment and the progenitor star. When a star explodes in vacuum, the first photons to escape from its surface appear as a brief, hours-long shock-breakout flare, followed by a cooling phase of emission. However, for stars exploding within a distribution of dense, optically thick circumstellar material (CSM), the first photons escape from the material beyond the stellar edge and the duration of the initial flare can extend to several days, during which the escaping emission indicates photospheric heating. Early serendipitous observations that lacked ultraviolet (UV) data were unable to determine whether the early emission is heating or cooling and hence the nature of the early explosion event. Here, in this study, we report UV spectra of the nearby SN 2023ixf in the galaxy Messier 101 (M101). Using the UV data as well as a comprehensive set of further multiwavelength observations, we temporally resolve the emergence of the explosion shock from a thick medium heated by the SN emission. We derive a reliable bolometric light curve that indicates that the shock breaks out from a dense layer with a radius substantially larger than typical supergiants.

79 ASTRONOMY AND ASTROPHYSICS↗

Understanding the evolution of liquid and solid microjets from grooved Sn and Cu samples using radiography

Experiments were performed on grooved Sn and Cu samples to study the temporal evolution of microjets. Jets were generated by the impact of gun-launched flyer plates against the back of grooved targets made from either Cu or Sn (groove depth of ~250 μm). The Hugoniot states in the various Sn targets encompassed conditions where solid phases are maintained throughout (7 and 16 GPa) and also conditions where melting occurs upon the release of compression (25 and 34 GPa); the transition occurs near a Hugoniot pressure of 23 GPa. Cu targets at 27 and 56 GPa provide comparisons in which the jets move at similar speeds but remain solid. In all cases, the spatial distribution of mass within the microjets was measured using high-speed synchrotron radiography. The result is a time history of the jet thickness profile from which quantities like total jet mass and jet velocity can be derived. In both the solid and liquid states, we generally observe that an increase in the shock strength leads to an increase in jet mass. However, this trend breaks down for Hugoniot states near the transition from continuously solid to melted-on-release. This is evidenced by the observation that there was no difference in the rate of mass flow in Sn jets at 16 and 25 GPa, while similar pressure jumps on either side of this range caused substantial changes in the jet mass. This contrasts with the behavior of smaller polishing defects that were present on the same samples (~1 μm deep). From these, no ejecta mass was detected below the melt boundary, but obvious microjets were generated once melting occurred. This indicates that crossing the bulk melt-on-release threshold can alternately promote or inhibit the flow of mass into microjets based on the amplitude of the initial perturbation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗