Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “POINT DEFECTS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,639 records · Page 91

Multistability of isolated and hydrogenated Ga–O divacancies in β–Ga 2 O 3

This work systematically explores 19 unique configurations of the close-associate Ga–O divacancies (V Ga V O ) in β–Ga 2 O 3 , including their complexes with H impurities, using hybrid functional calculations. Interestingly, most configurations are found to retain the negative-U behavior of V O , as they exhibit a thermodynamic (–/3–) charge-state transition level energetically located in the upper part of the band gap, where the 3– charge state is associated with the formation of a Ga–Ga dimer. The energy positions of the thermodynamic (–/3–) charge-state transition levels divide the divacancy configurations into three different groups, which can be understood from the three possible Ga–Ga dimerizations resulting from the tetrahedral and octahedral Ga sites. The relative formation energies of the different divacancy configurations, and hence the electrical activity of the divacancies, is found to depend on the Fermi-level position, and the energy barriers for transformation between different divacancy configurations are explored from nudged elastic band calculations. Hydrogenation of the divacancies is found to either passivate their negative-U charge-state transition levels or shift them down in Fermi level position, depending on whether the H resides at V O or forms an O–H bond at V Ga , respectively. Finally, the divacancy is discussed as a potential origin of the so-called E$^{*}_{2}$ center previously observed by deep-level transient spectroscopy.

36 MATERIALS SCIENCE↗

Thermodynamics of boron incorporation in BGaN

We study the thermodynamics of boron (B) incorporation into gallium nitride (GaN) using first-principles calculations. In the dilute limit, we have calculated the formation energies of different configurations of the B impurity in GaN and found that substitution on the cation site is favored over substitution on the anion site. Furthermore, under p-type conditions, interstitial boron can become the more favorable configuration and will ultimately limit the p-type conductivity. At higher B concentrations we use the generalized quasi-chemical approximation to elucidate the thermodynamic stability of boron gallium nitride (BGaN) alloys. We also investigate the effects of strain, which will be present if BGaN alloys are grown pseudomorphically on a GaN substrate.Without strain, B incorporation at typical growth conditions is limited to about 1.4% at 800 °C. Pseudomorphic strain raises the limit to 3.0% at the same temperature, close to experimentally observed levels of B incorporation.

36 MATERIALS SCIENCE↗

Iodine Vacancies do not Cause Nonradiative Recombination in Halide Perovskites

The iodine vacancy (V I ) has frequently been discussed as a strong nonradiative recombination center in halide perovskites. This proposition was mainly based on the presence of charge-state transition levels in the band gap, as found in early first-principles calculations. In this work, we perform accurate hybrid-density-functional calculations for V I in CsPbI 3 , CsSnI 3 , and CsGeI 3 and find that V I does not have any transition levels in the band gap in CsPbI 3 , in contrast to the results from calculations based on semilocal functionals. The iodine vacancy V I does introduce levels in the band gap in CsSnI 3 and CsGeI 3 , but our explicitly computed nonradiative capture coefficients demonstrate that V I has a negligible impact on nonradiative recombination. Our study corrects a misunderstanding of the role of V I in the iodide-based perovskites, and shifts the focus toward identifying and mitigating actual recombination centers in order to further improve the optoelectronic performance.

14 SOLAR ENERGY↗

Energy gap evolution across the superconductivity dome in single crystals of (Ba 1-x K x )Fe 2 As 2

The mechanism of unconventional superconductivity in iron-based superconductors (IBSs) is one of the most intriguing questions in current materials research. Among non-oxide IBSs, (Ba 1$-$x K x )Fe 2 As 2 has been intensively studied because of its high superconducting transition temperature and fascinating evolution of the superconducting gap structure from being fully isotropic at optimal doping (x ≈ 0.4) to becoming nodal at x > 0.8. Although this marked evolution was identified in several independent experiments, there are no details of the gap evolution to date because of the lack of high-quality single crystals covering the entire K-doping range of the superconducting dome. In this work, we conducted a systematic study of the London penetration depth, λ(T), across the full phase diagram for different concentrations of point-like defects introduced by 2.5-MeV electron irradiation. Fitting the low-temperature variation with the power law, Δλ ~ T n , we find that the exponent n is the highest and the Tc suppression rate with disorder is the smallest at optimal doping, and they evolve with doping being away from optimal, which is consistent with increasing gap anisotropy, including an abrupt change around x ≃ 0.8, indicating the onset of nodal behavior. Our analysis using a self-consistent t-matrix approach suggests the ubiquitous and robust nature of s ± pairing in IBSs and argues against a previously suggested transition to a d-wave state near x = 1 in this system.

36 MATERIALS SCIENCE↗

Some challenging points in the identification of defects in floating-zone n-type silicon irradiated with 8 and 15 MeV protons

Electrical properties of defects formed in n-Si(FZ) following 8 and 15 MeV proton irradiation are investigated by Hall effect measurements over the wide temperature range of T ≈ 25 to 300 K. Close attention is paid to the damaging factor of proton irradiation, leaving aside passivation effects by hydrogen. The concept of defect production and annealing processes being accepted in the literature so far needs to be reconsidered. Contrary to expectations the dominant impurity-related defects produced by MeV protons turn out to be electrically neutral in n-type material. Surprisingly, radiation acceptors appear to play a minor role. Annealing studies of irradiated samples of such complex defects as a divacancy tied to a phosphorus atom and a vacancy tied to two phosphorus atoms. The latter defect features high thermal stability. Identification of the dominant neutral donors, however, remains unclear and will require further, more detailed, studies. The electric properties of the material after proton irradiation can be completely restored at T = 800°C.

36 MATERIALS SCIENCE↗

Shear Pleasure: The Structure, Formation, and Thermodynamics of Crystallographic Shear Phases

A renaissance of interest in crystallographic shear structures and our recent work in this remarkable class of materials inspired this review. We first summarize the geometrical aspects of shear plane formation and possible transformations in ReO 3 , rutile, and perovskite-based structures. Then we provide a mechanistic overview of crystallographic shear formation, plane ordering, and propagation. Next we describe the energetics of planar defect formation and interaction, equilibria between point and extended defect structures, and thermodynamic stability of shear compounds. Finally, we emphasize the remaining challenges and propose future directions in this exciting area.

Materials Science↗

First-Cycle Simulation for Li-Rich Layered Oxide Cathode Material x Li 2 MnO 3 • (1- x )Li M O 2 ( x = 0.4)

Here, lithium-rich layered oxides (LRLO) x Li 2 MnO 3 • (1- x )Li M O 2 continue to attract attention owing to their promise of high capacity and energy density as lithium-ion battery cathodes, despite the degradation of atomic structure and energy density (voltage fade) with cycling. First-principles DFT calculations for the model systems M = Co and M = Mn 0.5 Ni 0.5 provide insights into the atomic-scale transformations in the bulk during the first charge and discharge of LRLO. The simulations were performed with the VASP code at the GGA+ U level. Molecular dynamics simulations were conducted at T = 1000 K (charge) and 2000 K (discharge) to accelerate the dynamics. Considerable Co migration to the Li layer occurs during the first charge for the system with M = Co, but the Li M O 2 component remains substantially intact for the system with M = Mn 0.5 Ni 0.5 . First-charge oxygen dimerization in the M = Co system occurs in both the Li M O 2 and the Li 2 MnO 3 components of the material, and exceeds than for M = Mn 0.5 Ni 0.5 , where dimerization is essentially confined to the Li 2 MnO 3 component. About half of the oxygen dimers created during the voltage plateau dissociate during the first discharge. Analysis of the redox suggests that some Mn 3+ is generated during the first charge for the system M = Co.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Seeing Inside Materials by Aberration-Corrected Electron Microscopy

The recent successful correction of lens aberrations in the electron microscope has improved resolution by more than a factor of two in just a few years, bringing many benefits for the study of materials. These benefits extend significantly beyond enhanced resolution alone. Aberration correction gives higher resolution by allowing the objective lens to have a wider aperture, which also results in a reduced depth of field. This effect can be used to only focus specific sections inside materials for the first time. In this contribution we describe recent results exploiting this capability. Additionally, we show how combining the microscopy data with first-principles theory gives new insights into materials properties. We cover two applications, both involving heavy atoms in a lighter host. The first shows how single Hf atoms can be mapped in three dimensions inside the 1 nm-wide SiO2 region of a high dielectric constant device structure, and how a link to macroscopic device properties results through theoretical calculations. The second example is from the field of nanoscience, where individual Au atoms are imaged inside Si nanowires grown by a vapor-liquid-solid mechanism. The majority of Au atoms are probably injected by the highly energetic electron beam. However, their observed sites and atomic configurations represent at least meta-stable configurations and match well to results from density functional calculations.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Solution for Predictive Physical Modeling in CdTe and Other Thin-Film PV Technologies

The main goal of this work was to eliminate the ambiguity between the observed performance changes under stress and their physical root cause by enabling a depth of modeling that takes account of diffusion and drift at the atomistic level coupled to the electronic subsystem responsible for a PV device’s function. Development of advanced physical models describing capture/emission/ recombination phenomena relevant to multivalent dopants, amphoteric centers, and donor-acceptor pairs was also accomplished. These models, incorporating grain bulk, grain boundaries, and hetero-interface properties, were implemented in a self-contained simulation tool that drastically reduces interpretation ambiguity and, for the first time, allows for predictive design of thin-film PV devices.

14 SOLAR ENERGY↗

Emerging Functionality in Transition-Metal Compounds Driven by Spatial Confinement and Broken Symmetry

This research project investigates the emerging functionality in transition-metal-compounds (TMCs) driven by spatial confinement and broken symmetry. It combines advanced growth capabilities with cutting-edge characterization and first principles theory to probe and control the properties of TMC interfaces, including the utilization and development of state-of-the-art atomically resolved electron microscopy and spectroscopy to determine the structure, composition, and bonding at TMC interfaces. The proposed research will focus on four challenging areas: 1) manipulate interfaces to design new material phases such as magnetic metals with unique polar structure (net dipole) to achieve multiple functionality; 2) explore electronic mismatch or screening at interfaces of insulating/poor metal TMCs to produce novel electronic and magnetic properties; 3) elucidate and exploit the role of defects, both point and extended, on the functionality of interfaces; 4) develop advanced electron microscopy/spectroscopy techniques to explore temperature dependent phase transitions and couple these structural tools with new nonlinear optical probes of the electronic structure. The research team aims to close the materials-by-design loop of make, measure, model, and modify. The program promises to enhance our ability to engineer the desired physical properties at interfaces, superlattices (periodic arrays of films of different compounds), and heterostructures of TMCs.

36 MATERIALS SCIENCE↗

20A44-121: Modeling and characterization of α-U to accelerate metallic fuels development [Slides]

This presentation contains a high-level description of the Idaho National Laboratory Laboratory Directed Research and Development (LDRD) project, 20A44-121: Modeling and characterization of α-U to accelerate metallic fuels development. It frames the problem, describes a motivation, outlines the research plan involving multiscale modeling and experiments, discusses impact and details research developments.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Effects of plasma hydrogenation on trapping properties of dislocations in heteroepitaxial InP/GaAs

In previous work, we have demonstrated the effectiveness of a post-growth hydrogen plasma treatment for passivating the electrical activity of dislocations in metalorganic chemical vapor deposition (MOCVD) grown InP on GaAs substrates by a more than two order of magnitude reduction in deep level concentration and an improvement in reverse bias leakage current by a factor of approximately 20. These results make plasma hydrogenation an extremely promising technique for achieving high efficiency large area and light weight heteroepitaxial InP solar cells for space applications. In this work we investigate the carrier trapping process by dislocations in heteroepitaxial InP/GaAs and the role of hydrogen passivation on this process. It is shown that the charge trapping kinetics of dislocations after hydrogen passivation are significantly altered, approaching point defect-like behavior consistent with a transformation from a high concentration of dislocation-related defect bands within the InP bandgap to a low concentration of individual dislocation related deep levels, before and after passivation. It is further shown that the 'apparent' activation energies of dislocation related deep levels, before and after passivation, reduce by approximately 70 meV as DLTS fill pulse times are increased from 1 microsecond to 1 millisecond. A model is proposed which explains these effects based on a reduction of Coulombic interaction between individual core sites along the dislocation cores by hydrogen incorporation. Knowledge of the trapping properties in these specific structures is important to develop optimum, low loss heteroepitaxial InP cells.

Ringel, S. A.↗

Effects of Plasma Hydrogenation on Trapping Properties of Dislocations in Heteroepitaxial InP/GaAs

In previous work, we have demonstrated the effectiveness of a post-growth hydrogen plasma treatment for passivating the electrical activity of dislocations in metalorganic chemical vapor deposition (MOCVD) grown InP on GaAs substrates by a more than two order of magnitude reduction in deep level concentration and an improvement in reverse bias leakage current by a factor of approx. 20. These results make plasma hydrogenation an extremely promising technique for achieving high efficiency large area and light weight heteroepitaxial InP solar cells for space applications. In this work we investigate the carrier trapping process by dislocations in heteroepitaxial InP/GaAs and the role of hydrogen passivation on this process. It is shown that the charge trapping kinetics of dislocations after hydrogen passivation are significantly altered, approaching point defect-like behavior consistent with a transformation from a high concentration of dislocation-related defect bands within the InP bandgap to a low concentration of individual deep levels after hydrogen passivation. It is further shown that the "apparent" activation energies of dislocation related deep levels, before and after passivation, reduce by approx. 70 meV as DLTS fill pulse times are increased from 1 usec. to 1 msec. A model is proposed which explains these effects based on a reduction of Coulombic interaction between individual core sites along the dislocation cores by hydrogen incorporation. Knowledge of the trapping properties in these specific structures is important to develop optimum, low loss heteroepitaxial InP cells.

Ringel, S. A.↗

Using Microscopy and Magnetization Measurements to Characterize Electron Irradiation of Nb and Nb3Sn

Recently, high-energy irradiation experiments on industrial multilamentary Nb3Sn wires have been performed; previous work showed an enhancement in Jc with 24 GeV proton irradiation with uences up to t 1:381021p/m2 [Spina, 2015] and an enhancement in Jc with 1 MeV neutron irradiation with uences up to t 1 1022n/m2 [Baumgartner et al., 2013]. This enhancement is explained by an enhancement of the pinning force due to radiationinduced point pinning defects, in addition to the grain boundary pinning. However, this created a large amount of radioactivity, with 1{2 on the order of magnitude of years. Thus, electron irradiation is a promising technique for creating articial pinning centers, while minimizing the amount of radioactivity present. We present preliminary results for electron irradiation on Nb3Sn wires and give upper bounds on eective uences for Jc enhancement. Furthermore, creating vacancies via electron irradiation is useful in the realm of SRF cavities, as vacancies can trap Hydrogen, preventing the formation of degradatory Nb-H compounds during cryogenic cooling. We present computer-aided microscopy analysis comparing hydride formation on Nb platelets before and after irradiation.

43 PARTICLE ACCELERATORS↗

First-Principles Analysis of Defect-Mediated Li Adsorption on Graphene

To evaluate the possible utility of single layer graphene for applications in Li ion batteries, an extensive series of periodic density functional theory (DFT) calculations are performed on graphene sheets with both point and extended defects for a wide range of lithium coverages. Consistent with recent reports, it is found that Li adsorption on defect-free single layer graphene is not thermodynamically favorable compared to bulk metallic Li. However, graphene surfaces activated by defects are generally found to bind Li more strongly, and the interaction strength is sensitive to both the nature of the defects and their densities. Double vacancy defects are found to have much stronger interactions with Li as compared to Stone–Wales defects, and increasing defect density also enhances the interaction of the Stone–Wales defects with Li. Li interaction with one-dimensional extended defects on graphene is additionally found to be strong and leads to increased Li adsorption. A rigorous thermodynamic analysis of these data establishes the theoretical Li storage capacities of the defected graphene structures. In some cases, these capacities are found to approach, although not exceed, those of graphite. The results provide new insights into the fundamental physics of adsorbate interactions with graphene defects and suggest that careful defect engineering of graphene might, ultimately, provide anode electrodes of suitable capacity for lithium ion battery applications.

36 MATERIALS SCIENCE↗

Restart File Improvements for MPACT

This report documents the work performed to address several defects and features request related to the restart capability in MPACT. The following defects were fixed as a part of this milestone: • #3616 (Defect) Error in MPACT Restart Files with BPRs, • #3637 (Defect) Restart with Semi-PC Yields Inconsistent Results, • #3652 (Defect) Fix Incorrect Exposure Value on HDF File After Restart, • #3777 (Defect) Fix State Point Number when Using Restart File, • #3986 (Defect) Pin Exposures are Incorrect, • #4106 (Defect) Pin Exposures Equal to Zero After Restart, and • #4288 (Defect) Core Average Exposure Wrong when Reading Restart Files. The new features that were added are: • Axial Re-meshing capability, • Incorporation of MAMBA-1D data necessary to restart coupled MPACT/CTF/MAMBA calculations, and • Addition of state variables to the restart file. Numerous tests were also implemented to verify and protect these features and this report was prepared to document the work performed.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

The Era of Gravitational Astronomy and Gravitational Field of Non-Rotating Single Point Particle in General Relativity

Utilizing various gauges of the radial coordinate, we give a General Relativistic (GR) description of static spherically symmetric spacetimes with a massive point source and vacuum outside this singularity. We show that in GR there exists a two-parameter family of such solutions to the Einstein equations which are physically distinguishable and describe the gravitational field of a single massive point particle with positive proper mass M{sub 0} and positive Keplerian mass M < M{sub 0}. In particular, we show that the widespread Hilbert form of the Schwarzschild solution, which depends only on the Keplerian mass M and describes Black Holes (BH), does not solve the Einstein equations with a massive point particle stress-energy tensor. Novel normal coordinates for the gravitational field and a new physical class of gauges are proposed, thus achieving a correct description of a point mass source in GR. We also introduce a gravitational mass defect of a point particle and determine the dependence of the solutions on this mass defect. The result can be described as a change of the Newton potential φ{sub N} = – G{sub N} M / r to a modified one φ{sub G} = – G{sub N} M / (r+G{sub N}M/ c{sup 2}ln ((M{sub 0})/M)) and the corresponding modification of the four-interval. We show that the proper 3D flat space, where these two potentials can be compared, is the tangent space above the position of the massive point source. In addition, we present invariant characteristics of the physically and geometrically different classes of spherically symmetric static spacetimes created by a point mass. Our findings are important for description of Extremely Compact Objects (ECOs) studied in relation with possible echoes in Gravitational Waves (GW) recently discovered by the LIGO/VIRGO collaboration.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗