Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PASSENGER”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,639 records · Page 91
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

Analysis of Handling Qualities and Power Consumption for Urban Air Mobility (UAM) eVTOL Quadrotors with Degraded Heave Disturbance Rejection and Control Response

A piloted handling qualities study of urban air mobility (UAM) electric vertical take-off and landing (eVTOL) quadrotors was performed utilizing the Vertical Motion Simulator (VMS) facility at NASA Ames Research Center. Rotor speed and variable pitch-controlled variants of a six-passenger conceptual design vehicle were assessed with different levels of degradation to control response and disturbance rejection bandwidth (DRB) in the heave axis. In previous work, preliminary trends across several handling quality rating categories reflected the effects of these degradations. Additionally, the impact of using different test standards and turbulence on the ratings were discussed. This paper elaborates on those results, but also provides insight into unexpected trends observed during the study including: a disharmony in attitude response, subpar ratings for the baseline Level 1 performance vehicle, and excessive drift and yaw couplings observed in a lateral reposition maneuver. Moreover, shortcomings of the handling quality scales and comparisons of power consumption among the vehicles in the various test conditions are presented.

Handling Qualities↗
NASA NTRSDate not supplied

Simulation Studies for an Urban Air Mobility Aircraft using Hardware-In-Loop Experiments

Urban Air Mobility seeks to transport passengers, deliver cargo, and provide emergency medical transportation in major metropolitan areas. This will be accomplished with distributed electric powered vertical takeoff and landing aircraft vehicles. The low specific energy of the current generation lithium-ion battery packs limit the operational range of the electric aircraft. Limited range impacts safety by reducing the amount of time available for analyzing the potential impact of errors and failures and responding to them, and for flying to an alternative landing area or returning to the base. It is therefore critical to understand the impact of flight and environmental conditions on the onboard lithium-ion battery pack’s health. With this as the motivation, the procedure for evaluating the performance of battery packs in a laboratory setting and the results obtained using this procedure on battery packs subject to power draw characteristics of a simulated flight of a NASA conceptual quadrotor aircraft model are described. The fully charged battery is allowed to discharge at specific C-rates based on the power draw profile during the experiment, and the current and voltages are recorded as a function of time. Observed results under different operating conditions and mission profiles are discussed.

UAM↗
NASA NTRSDate not supplied

Acoustic Flight Test of the Joby Aviation Advanced Air Mobility Prototype Vehicle

An extensive acoustic flight test was performed on the Joby Aviation pre-production all-electric vertical takeoff and landing prototype. With the design intent of carrying a pilot and four passengers a maximum range of 150 miles, this vehicle utilizes distributed propulsion and vectored thrust via six tilting propellers. As part of the Advanced Air Mobility (AAM) National Campaign, this is the first full-scale AAM aircraft tested by NASA over representative conditions for all phases of a typical mission profile. A 58- channel distributed microphone array was used to acquire acoustic measurements on more than 100 test points (31 unique conditions). The measurements were postprocessed with synchronously sampled vehicle position and state data to form ground noise contours of departures and approaches at various flight path angles and accelerations. Comparing ground areas of 75 dBA isolines, approaches consistently exhibit higher noise levels rela- tive to departures. Directivity maps were generated for constant airspeed level flyovers. Examples comparing the differences in a semi-thrust borne and full wing-borne mode are given, with full wing-borne mode representing the quietest phase of the flight envelope tested. Measurements for hover in and out of ground effect are given and found to have 2 to 5 dB variation over a single run, and more significant variation between back-to-back runs. Finally, initial analysis of acoustic symmetry about the longitudinal vehicle axis and repeatability over several test days are presented.

Acoustics↗
NASA NTRS2022

Low-Speed Performance Enhancement using Localized Active Flow Control: Integration Study of Localized Active Flow Control on a Performance Reference Aircraft (3/4)

A study of conceptual integration and performance aspects of localized active flow control (AFC) technology onto wings of short-to-medium-range project passenger airplanes is summarized. Using predicted aerodynamic performance improvement opportunities on the CFD Reference Aircraft, estimated benefit opportunities for conceptual implementation of studied wing localized active flow control (AFC) technology for low-speed (take-off and landing) application on a Performance Reference Aircraft configuration are presented. Using conceptual AFC systems and structural integration weight penalties for studied concepts, potential relevant net performance benefits can be obtained with reliable AFC in takeoff and landing. The conceptual integration study identifies potential promising localized wing AFC application opportunities for high-lift conditions using energy sources for modern aircraft. Material benefits are estimated for take-off and landing configurations for selected localized AFC applications. Next steps to refine and expand results of investigated topics, as well as possible other local AFC wing applications, are suggested.

AFC↗
NASA NTRSDate not supplied

Quantifying Uncertainty of Landing and Takeoff Noise for Commercial Supersonic Aircraft

Of the many challenges faced by manufacturers attempting to offer supersonic travel to the public, the uncertainty in predicting the noise of these aircraft in airport operations has an immediate impact. No noise regulation exists in FAA or ICAO for certifying such aircraft, as these organization require solid data, usually from existing aircraft. Manufacturers are taking large risks to design a vehicle not knowing whether it will be allowed to fly. A partial solution to this conundrum is to use physics-based simulations to provide the “data” used to calibrate system-level prediction methods, carefully documenting the uncertainty of the method for application to supersonic aircraft. A close look at the accuracy of empirical prediction methods points to areas where improvements need to be made if noise studies of supersonic aircraft are to be useful. As NASA embarks on a focused research program to improve predictions of noise from the noise-dominant propulsion noise of commercial supersonic aircraft, this paper documents the work done to baseline the uncertainties found in today’s noise prediction methods. A relatively simplistic method was developed, summarizing the error of the empirical methods on a component basis and following their impact on the total aircraft during landing and takeoff operations using Monte Carlo analysis. By this method it is found that current empirical noise prediction methods have an uncertainty of 1.5 EPNdB cumulative for propulsion noise of a representative conventional subsonic passenger aircraft. When applied to likely near-term supersonic commercial aircraft, the uncertainty is 7.6 EPNdB cumulative, a difference that must be reduced if the prediction methods are to guide decision makers.

Airport noise↗
NASA NTRSDate not supplied

An Initial Assessment of Variable Depth Liner Optimization for Ducted Proprotor Applications

The rise of the Urban Air Mobility market has spurred the design of a new generation of novel aircraft. To aid industry and researchers interested in these types of aircraft, the Revolutionary Vertical Lift Technology project at NASA has developed a fleet of reference vehicles for system studies. A new six-passenger reference vehicle has recently been added to the research portfolio that has ducted proprotors for propulsors. The ducts present an opportunity to apply acoustic treatment to the interior of the duct that could target both tonal and broadband noise, representative of the sound produced by this type of propulsor. In this paper, design methodologies are presented to design a variable depth liner for this application. An optimizer is used to design multiple liners with variable chamber depths. Experimental results from normal impedance testing are compared to numerical predictions using the optimizer model and a finite element model. Results show that an optimizer can be used to design an acoustic liner with favorable performance for a broad range of frequencies, which could be appropriate for a ducted proprotor application.

Matthew B Galles↗
NASA NTRS2022

Greenhouse Gas Emission Estimations for 2016-2020 using the Sherlock Air Traffic Data Warehouse

Data and analyses are presented on the utilization of aircraft in the U.S. and the greenhouse gas emissions that they create. Commercial passenger and cargo aviation flight data, captured in the Sherlock data warehouse at NASA Ames over the five years from 2016 to 2020, is used to estimate the miles flown by major aircraft models. The estimates for aggregate annual number of flights are validated against data published by the Bureau of Transportation Statistics. The corresponding fuel usage is estimated using the International Civilian Aviation Organization (ICAO) fuel use tables and carbon dioxide emissions are calculated using a fuel-use multiplicative factor. A key conclusion of this analysis is that a small number of long-haul flights (with ranges greater than 2485 statute miles) create a disproportionately large fraction (30%) of annual total U.S. aviation-related carbon dioxide emissions, while a relatively large number of short flights (less than 311 statute miles) contribute a small net amount (less than 5%) of U.S. aviation-related carbon dioxide emissions. These U.S. results are consistent with a similar recent 2020 emissions study conducted by EUROCONTROL.

Emissions↗
NASA NTRSDate not supplied

The In-time Aviation Safety Management System Concept for Part 135 Operators

Transformations of the National Airspace System, such as envisioned with Advanced Air Mobility, will enable improvements for managing and assuring safety for Part 135 transportation of passengers and cargo. The purpose of this paper is to describe the In-time Aviation Safety Management System (IASMS) Concept of Operations (ConOps) and how its innovations such as using predictive analytics could benefit operators for risk management and safety assurance. The National Academies recommended development of an IASMS ConOps to secure a safe future NAS. Part 135 operators are currently not required to have a formal safety management system.

Kyle K. Ellis↗
NASA NTRSDate not supplied

Design and Analysis of Corridors for UAM Operations

Urban Air Mobility (UAM) is predicted to provide alternate modes of transportation for cargo and passengers in the urban areas. Integration of UAM operations into the National Airspace System is a challenge especially around large airport. The Federal Aviation Administration’s (FAA) UAM Concept of Operations (ConOps) suggests new airspace structures for UAM operations such as corridors where FAA air traffic control (ATC) will not be expected to provide services. This paper presents a design for corridors in the Dallas Fort Worth (DFW) area that attempts to minimize air traffic controller interactions with UAM pilots and operators. The corridor and vertiports are then analyzed with respect to Class B separation criteria and wake advisory criteria. The results show that for the corridors designed for the DFW area and presented in this research, in some cases Class B separation criteria are not available between UAM corridors and legacy traffic due to the geometry of the airport. It shows that wake advisory criteria were not met for some segments in North Flow traffic but were generally met in South Flow. This means that some corridor segments at DFW airport will not be available for a given airport flow and may need new placements, which need further investigation.

Urban Air Mobility↗
NASA NTRSDate not supplied

Conceptual Exploration of Aircraft Configurations for the SUSAN Electrofan

Summary of Work - Explored the aircraft configuration trade space for NASA’s Subsonic Single Aft Engine (SUSAN) Electrofan concept – a 180 passenger regional jet aircraft that features advanced electrified aircraft propulsion (EAP) and propulsion-airframe integration (PAI) technologies - Evaluated concepts through a low-order multidisciplinary design and analysis framework

Timothy Chau↗
NASA NTRSDate not supplied

Visualizing Corridors in Terminal Airspace using Trajectory Clustering

Context: Advances in battery and automation technology have made routine air taxi and cargo transport in urban areas a business model that can be attained by emerging aviation innovators. The community vision and work to enable these novel operations is discussed using the term ‘Urban Air Mobility’ or UAM. Small, piloted, airspace vehicles that fly with a few passengers do operate in urban areas today, and these vehicles can be studied as an early proxy for this future UAM traffic. Aim: We seek to identify corridors already in daily operation and their properties. Method: We applied DBSCAN and HDBSCAN to Dallas Forth-Worth TRACON flight data to identify corridors in use, their density, and devised a method to annotate landing sites used in these corridors with site metadata. Results: While DBSCAN was unable to group similar trajectories, we we were able to successfully identify corridors using HDBSCAN, measure their density and annotate them. Conclusion: The applied method can successfully identify corridors in daily operation with additional metadata to help domain expert understand the intent of UAM corridors.

UAM, Trajectory, TRACON, Clustering, DBSCAN, HDBSC↗
NASA NTRSDate not supplied

Update on Subsonic Single Aft Engine (SUSAN) Electrofan Trade Space Exploration

NASA is conducting an ongoing trade study analysis of the SUSAN Electrofan aircraft concept, which utilizes 20-MW-class electrified aircraft propulsion to enable propulsive, aerodynamic, and control benefits while retaining the range, speed, and size of typical narrow-body regional aircraft. The study is constrained by the ground rules of operating within the current airport and airspace infrastructure. This ongoing study seeks to find a configuration and combination of technologies that yield significant fuel burn and emissions benefits. Another key goal is to reduce cost per passenger mile. Currently, the study is focused on a configuration that utilizes jet A or sustainable aviation fuels, however, we plan to consider other fuel alternatives in the future. This paper describes the progress in defining the architecture of the aircraft, engine, power system, control system, and initial understandings of the sensitivity of the potential configurations to technology assumptions based on key performance parameters. Additionally, progress towards definition and refinement of driving operational, economic, infrastructure, certification, and technical requirements is discussed.

aircraft concept↗
NASA NTRSDate not supplied

Update on Subsonic Single Aft Engine (SUSAN) Electrofan Trade Space Exploration

NASA is conducting an ongoing trade study analysis of the SUSAN Electrofan aircraft concept, which utilizes 20-MW-class electrified aircraft propulsion to enable propulsive, aerodynamic, and control benefits while retaining the range, speed, and size of typical narrow-body regional aircraft. The study is constrained by the ground rules of operating within the current airport and airspace infrastructure. This ongoing study seeks to find a configuration and combination of technologies that yield significant fuel burn and emissions benefits. Another key goal is to reduce cost per passenger mile. Currently, the study is focused on a configuration that utilizes jet A or sustainable aviation fuels, however, we plan to consider other fuel alternatives in the future. This presentation describes the progress in defining the architecture of the aircraft, engine, power system, control system, and initial understandings of the sensitivity of the potential configurations to technology assumptions based on key performance parameters. Additionally, progress towards definition and refinement of driving operational, economic, infrastructure, certification, and technical requirements is discussed.

Ralph H. Jansen↗
NASA NTRSDate not supplied

Visualizing Corridors in Terminal Airspace Using Trajectory Clustering

Context: Advances in battery and automation technology have made routine air taxi and cargo transport in urban areas a business model that can be attained by emerging aviation innovators. The community vision and work to enable these novel operations is discussed using the term ‘Urban Air Mobility’ or UAM. Small, piloted, airspace vehicles that fly with a few passengers do operate in urban areas today, and these vehicles can be studied as an early proxy for this future UAM traffic. Aim: We seek to identify corridors already in daily operation and their properties. Method: We applied DBSCAN and HDBSCAN to Dallas Forth-Worth TRACON flight data to identify corridors in use, their density, and devised a method to annotate landing sites used in these corridors with site metadata. Results: While DBSCAN was unable to group similar trajectories, we we were able to successfully identify corridors using HDBSCAN, measure their density and annotate them. Conclusion: The applied method can successfully identify corridors in daily operation with additional metadata to help domain expert understand the intent of UAM corridors.

UAM Trajectory, TRACON, Clustering, DBSCAN, HDBSCA↗
NASA NTRSDate not supplied

Local Analysis-Test Correlation Of Tow-Steered Composite Shells With Small Cutouts

The prebuckling and postbuckling behavior of two composite tow-steered shells with small cutouts is assessed using nonlinear dynamic finite element analyses and compared in detail with experimental measurements. The cylindrical shells were manufactured without cutouts using an automated fiber placement system, where the shells’ fiber orientation angles vary continuously around the shell circumference from ±10 degrees on the axially stiff crown and keel, to ±45 degrees on the shear-stiff sides. The first shell with overlaps has laminate thickness variations on the crown and keel that result from application of all 24 tows during each pass of the fiber placement system. The second shell without overlaps uses the fiber placement system’s tow drop/add capability to achieve a more uniform shell wall thickness. An unreinforced cutout representing a passenger door on a commercial aircraft fuselage is machined into the side of each of the two shells. These shells with cutouts were tested in axial compression and buckled elastically in previous work. Detailed nonlinear finite element analysis results are compared with their corresponding measured local load-displacement and load-strain responses in prebuckling, at global buckling, and into a stable postbuckled state. Test data from displacement transducers, strain gages, and digital image correlation are extracted at the centers of the crown and keel, and at the middles of the top and left edges of the cutout. The overall agreement between these measured and analytical responses is excellent in prebuckling through global buckling, and very good from global buckling through postbuckling. As such, the excellent correlation observed here increases confidence in applying tow-steered composites in operational vehicles.

Composites↗
NASA NTRSDate not supplied

Structures and Materials Research at NASA Langley Research Center

NASA explores the unknown in air and space, innovates for the benefit of humanity, and inspires the world through discovery. The Structures and Materials discipline at NASA Langley Research Center supports this mission through advanced materials and manufacturing approaches applied to innovative structural concepts. We start with synthesizing novel material systems and applying tools and methods to predict and validate their static, dynamic, durability and damage tolerance behavior. We mature materials from test tube to test flight by developing manufacturing techniques that enable the advancement of aerospace structures from concept to reality. We develop advanced measurement techniques for health management and nondestructive evaluation. We draw on our structures and materials core capabilities to enable safe, reliable lightweight aerospace structures for application in all environments. You will find the results of our work in the assembly of large structures in space and on other planets, vehicles that carry crew into space, vehicles that operate at high speeds and in extreme environments, and technology for passenger and crew safety in commercial aviation. This presentation will provide an overview of Langley Research Center’s role within the agency, then focus on how current Structures and Materials research areas support a variety of NASA missions in space operations, exploration, and aeronautics.

Structures↗
NASA NTRSDate not supplied

Local Analysis-Test Correlation Of Tow-Steered Composite Shells With Small Cutouts

The prebuckling and postbuckling behavior of two composite tow-steered shells with small cutouts is assessed using nonlinear dynamic finite element analyses and compared in detail with experimental measurements. The cylindrical shells were manufactured without cutouts using an automated fiber placement system, where the shells’ fiber orientation angles vary continuously around the shell circumference from ±10 degrees on the axially stiff crown and keel, to ±45 degrees on the shear-stiff sides. The first shell with overlaps has laminate thickness variations on the crown and keel that result from application of all 24 tows during each pass of the fiber placement system. The second shell without overlaps uses the fiber placement system’s tow drop/add capability to achieve a more uniform shell wall thickness. An unreinforced cutout representing a passenger door on a commercial aircraft fuselage is machined into the side of each of the two shells. These shells with cutouts were tested in axial compression and buckled elastically in previous work. Detailed nonlinear finite element analysis results are compared with their corresponding measured local load-displacement and load-strain responses in prebuckling, at global buckling, and into a stable postbuckled state. Test data from displacement transducers, strain gages, and digital image correlation are extracted at the centers of the crown and keel, and at the middles of the top and left edges of the cutout. The overall agreement between these measured and analytical responses is excellent in prebuckling through global buckling, and very good from global buckling through postbuckling. As such, the excellent correlation observed here increases confidence in applying tow-steered composites in operational vehicles.

Composites↗
NASA NTRS2022

Design of an Open Rotor, Braced-Wing Electric Transport

A notional, 19-passenger, battery-powered, fully electric airplane is investigated in this study. It is designed to serve the regional aviation market of the near future. Three strategies are used to reduce energy demands placed on its batteries: 1) a high aspect ratio, braced wing, 2) two efficient open rotor propellers, and 3) flying at comparatively low cruise speeds. It has an otherwise conventional airframe architecture. Parametric system weight, aerodynamic, propeller, and mission performance models are developed. Single-rotation and contra-rotation propellers are studied. Implementation of a novel selective noise reduction system is also investigated. During sizing and optimization of its design variables, battery cell specific energy is treated as a technology parameter that is varied to determine its influence on mission range. To achieve a minimum range success criterion of 250 nmi with reserves, it is found that battery cell specific energy must be at least 600 W-h/kg, more than twice the capability of today’s lithium-ion cells.

Electric Aircraft↗