Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Numerical”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,639 records · Page 91
All sourcesNASA NTRSDOE OSTI
NASA NTRS1990

A numerical method for prediction of compressible turbulent flows with closure models

A new computer code to solve the time averaged Navier-Stokes equations is developed. Many of the state-of-the-art numerical techniques and algorithms have been tested and implemented in the program in order to achieve a better numerical accuracy and code efficiency. Various turbulence models are tested for a wide range of flows. The initial focus has been on two-equation eddy-viscosity models, which are the most advanced available in current compressible flow codes. The long term goal will be to test Reynolds-Stress models and to explore their performance in the high Mach number range. Although testing and improvement of turbulence models for supersonic and hypersonic flows is the primary objective of this research, part of the effort has been devoted to analyzing the vortex breakdown phenomena using new computer programs. Some preliminary results on the breakdown of a vortex flow in a tube are reported. Present calculations are restricted to two dimensional flow geometry.

Huang, P. G.↗
NASA NTRS1992

Validation of three-dimensional incompressible spatial direct numerical simulation code: A comparison with linear stability and parabolic stability equation theories for boundary-layer transition on a flat plate

Spatially evolving instabilities in a boundary layer on a flat plate are computed by direct numerical simulation (DNS) of the incompressible Navier-Stokes equations. In a truncated physical domain, a nonstaggered mesh is used for the grid. A Chebyshev-collocation method is used normal to the wall; finite difference and compact difference methods are used in the streamwise direction; and a Fourier series is used in the spanwise direction. For time stepping, implicit Crank-Nicolson and explicit Runge-Kutta schemes are used to the time-splitting method. The influence-matrix technique is used to solve the pressure equation. At the outflow boundary, the buffer-domain technique is used to prevent convective wave reflection or upstream propagation of information from the boundary. Results of the DNS are compared with those from both linear stability theory (LST) and parabolized stability equation (PSE) theory. Computed disturbance amplitudes and phases are in very good agreement with those of LST (for small inflow disturbance amplitudes). A measure of the sensitivity of the inflow condition is demonstrated with both LST and PSE theory used to approximate inflows. Although the DNS numerics are very different than those of PSE theory, the results are in good agreement. A small discrepancy in the results that does occur is likely a result of the variation in PSE boundary condition treatment in the far field. Finally, a small-amplitude wave triad is forced at the inflow, and simulation results are compared with those of LST. Again, very good agreement is found between DNS and LST results for the 3-D simulations, the implication being that the disturbance amplitudes are sufficiently small that nonlinear interactions are negligible.

Joslin, Ronald D.↗
NASA NTRS1992

Direct numerical simulation of a combusting droplet with convection

The evaporation and combustion of a single droplet under forced and natural convection was studied numerically from first principles using a numerical scheme that solves the time-dependent multiphase and multispecies Navier-Stokes equations and tracks the sharp gas-liquid interface cutting across an arbitrary Eulerian grid. The flow fields both inside and outside of the droplet are resolved in a unified fashion. Additional governing equations model the interphase mass, energy, and momentum exchange. Test cases involving iso-octane, n-hexane, and n-propanol droplets show reasonable comparison rate, and flame stand-off distance. The partially validated code is, thus, readied to be applied to more demanding droplet combustion situations where substantial drop deformation render classical models inadequate.

Liang, Pak-Yan↗
NASA NTRS1992

Numerical simulation of the circulation of the atmosphere of Titan

A three dimensional General Circulation Model (GCM) of Titan's atmosphere is described. Initial results obtained with an economical two dimensional (2D) axisymmetric version of the model presented a strong superrotation in the upper stratosphere. Because of this result, a more general numerical study of superrotation was started with a somewhat different version of the GCM. It appears that for a slowly rotating planet which strongly absorbs solar radiation, circulation is dominated by global equator to pole Hadley circulation and strong superrotation. The theoretical study of this superrotation is discussed. It is also shown that 2D simulations systemically lead to instabilities which make 2D models poorly adapted to numerical simulation of Titan's (or Venus) atmosphere.

Hourdin, F.↗
NASA NTRS1991

Numerical simulations of space processing - The reality, the myth, and the future

The present capabilities offered by the combination of advanced special and general purpose numerical codes and supercomputers are discussed. Emphasis is placed on unique demands placed by the space environment on the computation of realistic space experiments and recommendations for improving the scientific return on the space investment. It is concluded that numerical simulations can provide timely and relevant answers which can guide and improve future space experiments.

Chait, A.↗
NASA NTRS1991

Numerical prediction of wakes in cascades and compressor rotors including the effects of mixing. I - Cascade wakes including the effects of incidence and freestream turbulence

The results of a numerical investigation to predict the flow in the wake regions of compressor cascades, and wakes and mixing in rotors are presented. Attention is given to the flow in compressor cascades including the effects of change in loading (incidence) and the inlet freestream turbulence intensity. The numerical analysis shows a slight increase in the total pressure loss coefficient through the cascade with increasing turbulence levels.

Lakshminarayana, B.↗
NASA NTRS1991

Numerical prediction of wakes in cascades and compressor rotors including the effects of mixing. II - Rotor passage flow and wakes including the effects of spanwise mixing

The results of a numerical investigation to predict the flow field including wakes and mixing in axial-flow compressor rotors are presented. The wake behavior in a moderately loaded compressor rotor is studied numerically using a 3D incompressible Navier-Stokes solver with a high Reynolds number form of a turbulence model. The equations are solved using a time dependent implicit technique. The agreement between the measured data and the predictions is good; including the blade boundary-layer profiles, wake mean-velocity profiles, and decay. The ability of the pseudocompressibility scheme to predict the entire flow field including the near and far wake profiles and its decay characteristics, effect of loading, and the viscous losses of a 3D rotor flow field are demonstrated. The mixing in the downstream regions away from the hub and annulus walls is dominated by wake diffusion. In regions away from the walls the radial mixing is predominantly caused by the transport of mass, momentum, and energy by the radial component of velocity in the wake.

Lakshminarayana, B.↗
NASA NTRS1991

The numerical simulation of a high-speed axial flow compressor

The advancement of high-speed axial-flow multistage compressors is impeded by a lack of detailed flow-field information. Recent development in compressor flow modeling and numerical simulation have the potential to provide needed information in a timely manner. The development of a computer program is described to solve the viscous form of the average-passage equation system for multistage turbomachinery. Programming issues such as in-core versus out-of-core data storage and CPU utilization (parallelization, vectorization, and chaining) are addressed. Code performance is evaluated through the simulation of the first four stages of a five-stage, high-speed, axial-flow compressor. The second part addresses the flow physics which can be obtained from the numerical simulation. In particular, an examination of the endwall flow structure is made, and its impact on blockage distribution assessed.

Mulac, Richard A.↗
NASA NTRS1991

A numerical simulation of magnetic reconnection and radiative cooling in line-tied current sheets

Radiative MHD equations are used for an optically thin plasma to carry out a numerical experiment related to the formation of 'postflare' loops. The numerical experiment starts with a current sheet that is in mechanical and thermal equilibrium but is unstable to both tearing-mode and thermal-condensation instabilities. The current sheet is line-tied at one end to a photospheric-like boundary and evolves asymmetrically. The effects of thermal conduction, resistivity variation, and gravity are ignored. In general, reconnection in the nonlinear stage of the tearing-mode instability can strongly affect the onset of condensations unless the radiative-cooling time scale is much smaller than the tearing-mode time scale. When the ambient plasma is less than 0.2, the reconnection enters a regime where the outflow from the reconnection region is supermagnetosonic with respect to the fast-mode wave speed. In the supermagnetosonic regime the most rapidly condensing regions occur downstream of a fast-mode shock that forms where the outflow impinges on closed loops attached to the photospheric-like boundary. A similar shock-induced condensation might occur during the formation of 'postflare' loops.

Forbes, T. G.↗
NASA NTRS1992

A numerical method for solving systems of linear ordinary differential equations with rapidly oscillating solutions

The present numerical method for accurate and efficient solution of systems of linear equations proceeds by numerically developing a set of basis solutions characterized by slowly varying dependent variables. The solutions thus obtained are shown to have a computational overhead largely independent of the small size of the scale length which characterizes the solutions; in many cases, the technique obviates series solutions near singular points, and its known sources of error can be easily controlled without a substantial increase in computational time.

Bernstein, Ira B.↗
NASA NTRS1992

A numerical investigation of hydrogen combustion in Mach 2 flow

A numerical study is conducted of a reacting flowfield generated by a single hydrogen jet injected transversely behind a rearward facing step. A nonreacting mixing study was followed by a reacting simulation. The computation simulates a current experimental condition. The validation of the numerical solution was limited to a comparison of the wall-pressure distribution along the wall. The comparison indicates agreement between the experiment and the prediction with a maximum error of 7 percent. The addition of the reaction responsible for HO2 production (H + O2 + M = HO2 + M) to an initially simplified chemical mechanism reduced the exponential growth of the free radicals and reduced the amount of heat released by combustion; as a result, the flowfield was significantly changed. A reversed flow was obtained in limited regions of the flow.

Segal, Corin↗
NASA NTRS1992

Instabilities in astrophysical jets. II - Numerical simulations of slab jets

Numerical simulations of an unstable supersonic slab-symmetric jet are described. The instabilities within the jet are characterized by growing internal body waves and their coupled surface waves that are also predicted in linear perturbation theory. The characteristic theory of fluid dynamics is used to help interpret the wave morphologies. It is demonstrated that these waves can be excited by imposing an arbitrary disturbance. From the numerical simulations, it is found that the sound waves propagating against the flow slow down as they propagate outward, and they grow in amplitude. These waves eventually disrupt the jet at a certain length. This disruption length is related to the jet Mach number and the perturbation intensity. Thus, the Mach number of a jet observed with a radio telescope can be estimated by measuring the disruption length and estimating the perturbation intensity. The jet Mach numbers in radio tailed sources determined in this way agree quite well with estimates from ram pressure bending arguments. The wiggles and flares observed in many extragalactic jets, especially in tailed radio sources, appear to be intimately related to instabilities and the jet disruption process.

Zhao, Jun-Hui↗
NASA NTRS1992

Effect of airfoil (trailing-edge) thickness on the numerical solution of panel methods based on the Dirichlet boundary condition

The practical limit of airfoil thickness ratio for which acceptable engineering results are obtainable with the Dirichlet boundary-condition-based numerical methods is investigated. This is done by studying the effect of thickness on the calculated pressure distribution near the trailing edge and by comparing the aerodynamic coefficients with available exact solutions. The first objective of this study, owing to the wide use of such computational methods, is to demonstrate the numerical symptoms that occur when the body or wing thickness approaches zero and to increase the awareness of potential users of these methods. Additionally, an effort is made to obtain the practical limits of the trailing-edge thickness where such problems will appear in the flow solution, and to propose some possible cures for very thin airfoils or those with cusped trailing edges.

Yon, Steven↗
NASA NTRS1992

Direct numerical simulation of laminar breakdown in high-speed, axisymmetric boundary layers

Temporal direct numerical simulation of laminar breakdown via subharmonic secondary instability in high-speed axisymmetric boundary layers has been accomplished using a highly accurate, fully explicit algorithm which combines spectral collocation and high-order compact-difference techniques. Numerical test cases confirm that subharmonic secondary instability is confirmed to be a viable path to transition in high-speed boundary-layer flow. Secondary instability is shown to account for peaks in the Reynolds stresses at or near the critical layer which are not possible from the second-mode primary instability alone. Reynolds stresses spatially reconstructed from the temporal model via the Gaster transformation show a 'spreading angle' of about 12 deg, in qualitative agreement with experimental findings. The rate of broadening of the Reynolds stress peak is a strongly nonlinear phenomenon which cannot be reproduced by secondary instability theory.

Pruett, C. D.↗
NASA NTRS1992

A comparative study between experimental results and numerical predictions of multi-wall structural response to hypervelocity impact

Over the last three decades, multiwall structures have been analyzed extensively, primarily through experiment, as a means of increasing the protection afforded to spacecraft structure. However, as structural configurations become more varied, the number of tests required to characterize their response increases dramatically. As an alternative, numerical modeling of high-speed impact phenomena is often being used to predict the response of a variety of structural systems under impact loading conditions. This paper presents the results of a preliminary numerical/experimental investigation of the hypervelocity impact response of multiwall structures. The results of experimental high-speed impact tests are compared against the predictions of the HULL hydrodynamic computer code. It is shown that the hypervelocity impact response characteristics of a specific system cannot be accurately predicted from a limited number of HULL code impact simulations. However, if a wide range of impact loadings conditions are considered, then the ballistic limit curve of the system based on the entire series of numerical simulations can be used as a relatively accurate indication of actual system response.

Schonberg, William P.↗
NASA NTRS1992

Numerical models of mantle convection

An overview of numerical methods describing the structure and dynamics of the mantle is presented with attention given to novel 3D modeling techniques. The paper reviews 3D spherical and Cartesian models for constant viscosity emphasizing the assumptions regarding style of convection, time dependence, and implications for the mantle. Similarly treated are 3D Cartesian models with temperature-dependent viscosities, and briefly examined are models that are based on compressibility, nonlinear viscosity, or plates. Extensive illustrations are presented detailing: (1) temperature variations from models of 3D thermal convection in spherical shells; (2) thermal anomalies in equatorial cross sections; and (3) temperature variations in a spherical shell heated from within. The discussion relates the numerical results of the models with real mantle-convection events, and the simulations are shown to yield increasingly realistic representations of material behavior.

Schubert, G.↗
NASA NTRS1992

Numerical simulations using a dynamic solution-adaptive grid algorithm, with applications to unsteady internal flows

An investigation into the numerical simulation of unsteady flows is undertaken using a two-stage Runge-Kutta scheme coupled with the dynamic solution-adaptive grid algorithm developed by the authors. The inviscid fluxes are described by a modified Advective Upwind Split Method to eliminate the need for artificial dissipation. A well-documented numerical example containing moving discontinuities is presented that demonstrates the ability of the coupled grid/solver scheme to accurately capture unsteady flowfield phenomena. Applications are to a typical inlet diffuser configuration at Mach 3.0 with excessive back pressure inducing inlet unstart.

Benson, Rusty A.↗
NASA NTRS1992

The void spectrum in two-dimensional numerical simulations of gravitational clustering

An algorithm for deriving a spectrum of void sizes from two-dimensional high-resolution numerical simulations of gravitational clustering is tested, and it is verified that it produces the correct results where those results can be anticipated. The method is used to study the growth of voids as clustering proceeds. It is found that the most stable indicator of the characteristic void 'size' in the simulations is the mean fractional area covered by voids of diameter d, in a density field smoothed at its correlation length. Very accurate scaling behavior is found in power-law numerical models as they evolve. Eventually, this scaling breaks down as the nonlinearity reaches larger scales. It is shown that this breakdown is a manifestation of the undesirable effect of boundary conditions on simulations, even with the very large dynamic range possible here. A simple criterion is suggested for deciding when simulations with modest large-scale power may systematically underestimate the frequency of larger voids.

Kauffmann, Guinevere↗