SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Mission support provided by Deep Space Network for Project Voyager is discussed. Mission operations covered include for Voyager 1 the far encounter 2, Saturn near encounter, and the post encounter phase, and for Voyager 2 the Jupiter Saturn cruise phase.
The ground and spacecraft hardware research, design, and implementation lead to an end to end in flight technology demonstration on the International Solar Polar Mission spacecraft. An introduction to the overall effort is given and the flight experiment objectives are established. The expected improvements in the telecommunications performance are summarized. Also presented is a conceptual mission operations plant.
The Deep Space Network support of Pioneer Mission Operations during the cruise phases of Pioneers 6 through 9, Pioneer 10, Pioneer 11, and the orbital operations of Pioneer 12 spacecrafts is described. All Pioneer spacecraft appear in good health and are operating nominally. Tracking coverage from June 1980 through March 1981 is shown.
A detailed description of the space shuttle vehicle and associated subsystems is given. Space transportation system propulsion, power generation, environmental control and life support system and avionics are among the topics. Also, orbiter crew accommodations and equipment, mission operations and support, and flight crew complement and crew training are addressed.
New observation with the Ultraviolet Spectrometer and Polarimeter (UVSP) of a number of manifestations of solar activity obtained during the first three months of Solar Maximum Mission operations are presented. Attention is given to polarimetry in sunspots, oscillations above sunspots, density diagnostics of transition-zone plasmas in active regions, and the eruptive prominence - coronal transient link.
The Spacelab-2 Small Helium-Cooled Infrared Telescope will be used to map extended astronomical sources of low surface brightness emission, to measure the Shuttle induced environment and to develop techniques for managing large volumes of superfluid helium in space. The instrument is an f/4 15.2-cm Herschelian telescope with ten photoconductor detectors in the focal plane. This paper describes the hardware and software aspects of the instrument with emphasis on mission operations. In particular, a description is given of the observing plan formulated to meet the scientific and engineering objectives, the scan drive system, the precautions in design and operation necessary to prevent the sun, moon, and earth from adversely affecting the observations, the implications of thruster firings, and the on-board experiment computer application software to control the scanning of the telescope and support on-board displays.
The continuing efforts of the Deep Space Network in support of Pioneer Mission Operations during the cruise phases of the Pioneers 6 through 11 spacecraft and Pioneer Venus orbital operations are discussed.
The compatibility and performance of the Shuttle communications system must be certified prior to operational missions. For this purpose, NASA has established the Electronics Systems Test Laboratory (ESTL) at the Johnson Space Center. This paper discusses the Shuttle communications system compatibility and performance testing being performed in the ESTL. The ESTL system verification test philosophy, including capabilities, procedures, and unique testing equipment are summarized. Summaries of the significant results of compatibility and performance tests of the Orbiter/Space-flight Tracking and Data Network, Orbiter/Air Force Remote Tracking Station, Orbiter/Tracking and Data Relay Satellite System and Orbiter/Shuttle Launch Support System interfaces are presented. The ESTL's unique ability to locate potential communication problems and participate in the resolution of these problems are discussed in detail.
The successful development of the Black Brant X (BBX) launch vehicle resulted from the application of a gyroscopically stabilized, unguided third stage motor configuration. Design analyses indicated sufficient gyroscopic stability and acceptable impact dispersion could be realized by optimizing second/third stage separation time. By flying an unguided third stage motor, significant program cost savings were realized. One flight test and two operational missions demonstrated the feasibility of utilizing gyroscopic stability to achieve satisfactory trajectory dispersion on a high performance rocket. A detailed assessment of the major dispersion contributors identified for the first three BBX missions is presented, offering important insight into the dispersion sensitivity of unguided, spin-stabilized flight.
The teleoperator maneuvering system (TMS), consisting of the vehicle, the shuttle orbiter bay cradle with airborne support equipment, and the aft flight deck control station, is described. The vehicle is a reusable remotely controlled free flying vehicle capable of a variety of missions including payload placement, retrieval, servicing, viewing, and large space systems assembly support. The TMS flies preprogrammed trajectories as well as being controlled or reprogrammed from the aft flight deck or the ground. A building block design philosophy is described which permits the evolution of capability as it is needed and delays cost as much as possible. Various mission operations are discussed.
A human factors analysis of the workstation design for the Earth Radiation Budget Satellite mission operation room is discussed. The relevance of anthropometry, design rules, environmental design goals, and the social-psychological environment are discussed.
The science, applications, commercial, U.S. national security and space operations missions that would require or be materially benefited by the availability of a permanent manned space station in low Earth orbit are considered. Space station attributes and capabilities which will be necessary to satisfy these mission requirements are identified. Emphasis is placed on the identification and validation of potential users, their requirements, and the benefits accruing to them from the existence of a space station, and the programmatic and cost implications of a space station program.
A general approach to the human factors (HF) analysis of new or existing projects at NASA/Goddard is delineated. Because the methodology evolved from HF evaluations of the Mission Planning Terminal (MPT) and the Earth Radiation Budget Satellite Mission Operations Room (ERBS MOR), it is directed specifically to the HF analysis of real-time support applications. Major topics included for discussion are the process of establishing a working relationship between the Human Factors Group (HFG) and the project, orientation of HF analysts to the project, human factors analysis and review, and coordination with major cycles of system development. Sub-topics include specific areas for analysis and appropriate HF tools. Management support functions are outlined. References provide a guide to sources of further information.
This report describes the development, validation, and application of a computer program for predicting trajectories and ground deposit patterns for particle released in the wakes of airplanes or helicopters. The computer program accounts for the effects of atmospheric turbulence, crosswind, propeller slipstream, terrain variations, evaporation, and plant canopy density on the particle trajectories. In order to validate the prediction method, some comparisons are shown between experimental data and theoretical predictions. Possible applications of the code for spray pattern improvement and for mission operations analysis are illustrated. In addition, the effect of winglets on pattern uniformity, drift, and airplane aerodynamics are presented.
Aspects of the second Space Shuttle flight, which carried the first payload of scientific instruments for remote sensing of the earth's atmosphere, oceans, and land areas, are discussed. The development and integration of the payload, the mission simulations and end-to-end testing, the launch, the payload mission operations, the landing, data removal, and payload removal, the scientific results, and some planned experiments using the Shuttle are addressed. Summaries of the experimental results are presented, including those for the imaging radar, infrared radiometer, ocean color experiment, air pollution measurements, feature identification and location experiment, night/day optical lightning survey, and bioengineering test. The availability of data and science reports is also covered.
The Columbia has completed a spectacularly successful four flight Orbital Flight Test program as well as the first operational mission in which two satellites were deployed. It is unprecedented that a vehicle so complex as the Shuttle could have reached such a state of maturity in so few missions. This maturity is reflected not only in terms of basic performance during dynamic flight phases, but also in the outstanding performance of individual spacecraft systems. Appreciably more CSS time has been logged during entry and particularly in the approach and landing phase than any other segment of the mission profile. The discussion that follows, therefore, will outline this phase in some detail including pilot comments, techniques, crew displays and landing aids. Some problem areas related to landing the Orbiter will be discussed, as well as possible solutions.
The Canadian Attitude Sensing Experiment Package (CASEP) was designed to demonstrate and verify the operation of an attitude sensing subsystem prior to committing its use on an operational mission. Data telemetry/recording requirements, power and physical requirements, and mission requirements of the experiment package are defined.
Mission scenario analysis and architectural concepts, alternative systems concepts, mission operations and architectural development, architectural analysis trades, evolution, configuration, and technology development are assessed.