Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MHD”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,639 records · Page 91

Drift-Alfven waves induced optical emission fluctuations in Aditya tokamak

In Aditya tokamak [S. B. Bhatt et al. Indian J. Pure Appl. Phys. 27, 710 (1989)], an increase in the H{sub a}lpha and C{sup 2+} intensity fluctuations from the edge region is observed with an increase in the magnetohydrodynamic (MHD) activity. Very small fluctuation amplitudes of H{sub a}lpha and C{sup 2+} intensity are observed in discharges where there is no MHD activity compared to the discharges with MHD activity. These fluctuations in the H{sub a}lpha and C{sup 2+}, measured by optical filter--photomultiplier tube combination--are modulated by Mirnov oscillations having a dominant peak with a common frequency approx7-10 kHz. Further investigation reveals the presence of strong coherent fluctuations in density and floating potential at same frequency as well. These observations indicate the existence of a nonelectrostatic instability, which may be based on the coupled mode of the drift mode and the Alfven mode. The coherent density fluctuations give rise to the experimentally observed coherent H{sub a}lpha and C{sup 2+} intensity fluctuations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Magnetohydrodynamic waves in the presence of relative motion between two populations of a plasma system

The paper investigates the role of relative motion between the fluid components of a plasma model, which is simulated by concatenation of two anisotropic magnetohydrodynamic (MHD) fluids, on the propagation of low-frequency waves and instabilities. The gyrotropic pressure of both the MHD components is given by generalized polytropic laws that allow the system to reduce to a variety of states. The linearized analysis is carried out and dispersion relation is derived using the normal mode technique. The dispersion relation, which gives numerous earlier results as special cases, is discussed both analytically as well as numerically for parameters appropriate for the space plasma. It is found that the relative motion between the two components, besides modifying the condition for fire-hose instability, causes the concatenated system to exhibit different kinds of relative ordering of the magnitudes of phase speeds of the various MHD modes in the directions parallel and antiparallel to the magnetic field. The relative motion between the components also influences the phase relationship between density and magnetic field fluctuations for the various compressive modes in the background ambient plasma.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Control of ideal and resistive magnetohydrodynamic modes in reversed field pinches with a resistive wall

Numerical studies of magnetohydrodynamic (MHD) instabilities with feedback control in reversed field pinches (RFPs) are presented. Specifically, investigations are performed of the stability of m=1 modes in RFPs with control based on sensing the normal and tangential magnetic fields at the resistive wall and applying two-parameter feedback proportional to these fields. The control scheme is based on that of [J. M. Finn, Phys. Plasmas 13, 082504 (2006)], which is here modified to use a more realistic plasma model. The plasma model now uses full resistive MHD rather than reduced MHD, and it uses three realistic classes of equilibrium parallel current density profiles appropriate to RFPs. Results with these modifications are in qualitative agreement with [J. M. Finn, Phys. Plasmas 13, 082504 (2006)]: the feedback can stabilize tearing modes (with resistive or ideal-wall) and resistive wall ideal modes. The limit for stabilization is again found to be near the threshold for ideal modes with an ideal-wall. In addition to confirming these predictions, the nature of the instabilities limiting the range of feedback stabilization near the ideal-wall ideal-plasma threshold are studied, and the effects of viscosity, resistive wall time, and plasma resistivity are reported.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Effect of pressure anisotropy and flow velocity on Kelvin-Helmholtz instability of anisotropic magnetized plasma using generalized polytrope laws

The effect of pressure anisotropy and flow velocity on the Kelvin-Helmholtz (KH) instability of two magnetized anisotropic pressure plasmas flowing relative to each other is investigated using generalized polytrope laws. The anisotropic pressure with the generalized polytrope laws is considered with three-dimensional perturbations in the description of plasma using relevant magnetohydrodynamic (MHD) set of equations. The magnetic field is assumed in the x-direction and parallel to the direction of the flow of plasma streams. A complete polytrope model is given for the considered system in terms of pressure components, magnetic field, and density of the fluids to discuss the condition of KH instability, stability, and overstability. The problem is solved using the normal mode analysis and the general dispersion relation is obtained by applying the appropriate boundary conditions. The case of nonvanishing wavenumber transverse to the direction of the stream is obtained, which represents the stationery configuration without excitation of KH instability. The longitudinal mode of propagation is discussed with conditions of KH instability, stability, and overstability for collisionless (anisotropic) double-adiabatic Chew-Goldberger-Low (CGL) and collisional (isotropic) MHD media, depending on various values of polytrope indices. The effects of pressure anisotropy, different flow velocities, and magnetic field are also discussed on the growth rate of KH instability. We observe that the presence of flow velocity and pressure anisotropy of the plasmas has a destabilizing influence on the growth rate of the system. The growth rate is found larger for MHD set of equations in comparison to the CGL set of equations. The presence of magnetic field has a stabilizing role on the growth rate of the considered system.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Hall effect in a strong magnetic field: Direct comparisons of compressible magnetohydrodynamics and the reduced Hall magnetohydrodynamic equations

In this work we numerically test a model of Hall magnetohydrodynamics in the presence of a strong mean magnetic field: the reduced Hall magnetohydrodynamic model (RHMHD) derived by [Gomez et al., Phys. Plasmas 15, 102303 (2008)] with the addition of weak compressible effects. The main advantage of this model lies in the reduction of computational cost. Nevertheless, up until now the degree of agreement with the original Hall MHD system and the range of validity in a regime of turbulence were not established. In this work direct numerical simulations of three-dimensional Hall MHD turbulence in the presence of a strong mean magnetic field are compared with simulations of the weak compressible RHMHD model. The results show that the degree of agreement is very high (when the different assumptions of RHMHD, such as spectral anisotropy, are satisfied). Nevertheless, when the initial conditions are isotropic but the mean magnetic field is maintained strong, the results differ at the beginning but asymptotically reach a good agreement at relatively short times. We also found evidence that the compressibility still plays a role in the dynamics of these systems, and the weak compressible RHMHD model is able to capture these effects. In conclusion the weak compressible RHMHD model is a valid approximation of the Hall MHD turbulence in the relevant physical context.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A weighted reverse Cuthill-McKee procedure for finite element method algorithms to solve strongly anisotropic electrodynamic problems

This paper presents a technique for improving the convergence rate of a generalized minimum residual (GMRES) algorithm applied for the solution of a algebraic system produced by the discretization of an electrodynamic problem with a tensorial electrical conductivity. The electrodynamic solver considered in this work is a part of a magnetohydrodynamic (MHD) code in the low magnetic Reynolds number approximation. The code has been developed for the analysis of MHD interaction during the re-entry phase of a space vehicle. This application is a promising technique intensively investigated for the shock mitigation and the vehicle control in the higher layers of a planetary atmosphere. The medium in the considered application is a low density plasma, characterized by a tensorial conductivity. This is a result of the behavior of the free electric charges, which tend to drift in a direction perpendicular both to the electric field and to the magnetic field. In the given approximation, the electrodynamics is described by an elliptical partial differential equation, which is solved by means of a finite element approach. The linear system obtained by discretizing the problem is solved by means of a GMRES iterative method with an incomplete LU factorization threshold preconditioning. The convergence of the solver appears to be strongly affected by the tensorial characteristic of the conductivity. In order to deal with this feature, the bandwidth reduction in the coefficient matrix is considered and a novel technique is proposed and discussed. First, the standard reverse Cuthill-McKee (RCM) procedure has been applied to the problem. Then a modification of the RCM procedure (the weighted RCM procedure, WRCM) has been developed. In the last approach, the reordering is performed taking into account the relation between the mesh geometry and the magnetic field direction. In order to investigate the effectiveness of the methods, two cases are considered. The RCM and WRCM procedures has successfully improved the convergence rate of the GMRES solver. For strong anisotropies, the WRCM procedure appears to have a higher convergence rate. The same behavior is shown when applying the methods to the rebuilding of an hypersonic MHD experiment.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Spatial scales and temporal scales in the theory of magnetohydrodynamic turbulence

In the study of incompressible magnetohydrodynamic (MHD) turbulence the correlation lengths along the directions parallel and perpendicular to the local mean magnetic field may be defined by iso-energy surfaces derived from second order structure functions. The correlation time of the turbulence may be defined in a similar manner by means of a temporal second order structure function. Moreover, there is a natural correspondence between the lengthscales of fluctuations with a given energy and the timescale of fluctuations of the same energy so that each iso-energy surface is associated with a unique pair of parallel and perpendicular correlation lengths and a unique correlation time. In the case when the magnetic Prandtl number is unity, Pr{sub m{identical_to}{nu}}/{eta}=1, it is shown that the correlation time {tau} associated with an iso-energy contour of energy E is equal to the energy cascade time of the turbulence in the sense that E/{tau}{approx}{epsilon}, where {epsilon} is the energy cascade rate. For balanced MHD turbulence, turbulence with vanishing cross-helicity, both the Goldreich and Sridhar theory and Boldyrev's theory are shown to have this same property. An attempt is made to generalize these ideas to imbalanced MHD turbulence, turbulence with nonvanishing cross-helicity. It is shown that if the normalized cross-helicity {sigma}{sub c} is a constant in the inertial range, independent of wavenumber, then one obtains a model in which the energy cascade times of the two Elsasser fields are equal throughout the inertial range, that is, {tau}{sup +}/{tau}{sup -}=1. This result appears to be contradicted by numerical simulations and, therefore, the generalization to imbalanced turbulence discussed here requires further development; this is an important unsolved problem.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Is Quadrupole Structure of Out-of-Plane Magnetic Field Evidence for Hall Reconnection?

The experimental observation of a quadrupole pattern in the ''out-of-plane'' field B{sub y} is usually interpreted as a tell-tale sign of Hall MHD mediated magnetic reconnection in the vicinity of a reconnecting X-point. In contrast to these conventional expectations, it is shown B{sub y} means of analytical equations describing the generation of B{sub y} that quadrupole structure can be formed even in the absence of Hall effects. In general, B{sub y} can be generated due to inhomogeneous ion flow, inhomogeneous current (Hall effect), or terms proportional to a pre-existing B{sub y}. This prediction is validated in a 3D global MHD simulation where it is shown that vortex flows at the dayside magnetopause lead to formation of a finite B{sub y} even in the absence of a pre-existing IMF B{sub y}. The generated field is shown to have a quadrupolar pattern in B{sub y} with peak amplitude {approx}0.5 of the total field. Similar vortex flows are also observed in 3D global hybrid simulations but the resulting B{sub y} structure in this case is a combination of the Hall effects and the inhomogeneous ion flows. Thus special care must be taken in using observations of quadrupole B{sub y} in satellite and experiments to infer information about its particular generation mechanism or attributing it to the Hall MHD reconnection regime.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Steady and unsteady Hall magnetohydrodynamics near an X-type magnetic neutral line

Hall magnetohydrodynamics (MHD) properties near a two-dimensional (2D) X-type magnetic neutral line in the steady state are considered via heuristic and rigorous developments. The heuristic development turns out to be useful in providing insight into the lack of dependence of the reconnection rate on the mechanism breaking the frozen-in condition of the magnetic field lines in the electron fluid. The latter result can be understood in terms of the ability of the ions and electrons to transport equal amounts of magnetic flux per unit time out of the reconnection region. The Hall effects are shown via a rigorous development to be able to sustain the hyperbolicity of the magnetic field (and hence a more open X-point configuration) near the neutral line in the steady state. The time-dependent Hall MHD problem shows that the Hall effect, when sufficiently strong, can indeed quench the finite-time singularity exhibited in ideal MHD.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Measurement and modeling of three-dimensional equilibria in DIII-D

A detailed experiment-theory comparison reveals that linear ideal MHD theory is in quantitative agreement with external magnetic and internal soft x-ray measurements of the plasma response to externally applied non-axisymmetric fields over a broad range of beta and rotation. This result represents a significant step toward the goal of advancing the understanding of three-dimensional tokamak equilibria. Both the magnetic and soft x-ray measurements show the driven plasma perturbation increases linearly with the applied perturbation, suggesting the relevance of linear plasma response models. The magnetic and soft x-ray measurements are made at multiple toroidal and poloidal locations, allowing well resolved measurements of the global structure. The comparison also highlights the need to include kinetic effects in the MHD model once beta exceeds 80% of the kink mode limit without a conducting wall. Two distinct types of response fields are identified by the linear ideal MHD model: one that consists of localized currents at the rational surfaces that cancel the applied resonant field and another that is excited by the components of the external field that couple to the kink mode. Numerical simulations show these two fields have similar amplitudes in ITER-shaped DIII-D discharges where n = 3 fields are used to suppress edge localized modes.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Symmetries of resistive two-fluid magnetohydrodynamics under reversals of toroidal field, current, and rotation

The discrete symmetries of time-dependent, non-axisymmetric, two-fluid magnetohydrodynamics (MHD) equations are considered. Solutions of the time-independent, axisymmetric, ideal-MHD equations remain solutions under reversals of the toroidal field, current density, or rotation. Introducing non-axisymmetry, resistivity, and two-fluid effects into the equations each break different symmetries. Symmetry groups for solutions possessing up-down spatial symmetry, and the effect of flipping the magnetic geometry across the horizontal midplane, are also considered. It is shown that poloidal velocity may or may not be reversed under a simultaneous reversal of the toroidal field and a vertical reflection of the magnetic geometry, depending on the symmetry of the velocity. Because the symmetry groups of ideal, resistive, and two-fluid MHD are distinct, it may be possible to ascertain the dominant physical mechanism of various phenomena through empirical observations of symmetry-breaking. These results, which hold for nonlinear solutions in arbitrary geometry, should also be of use in testing numerical codes.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Characteristics of argon plasma waveguide produced by alumina capillary discharge for short wavelength laser application

We have reported the argon (Ar) plasma waveguide produced in an alumina (Al{sub 2}O{sub 3}) capillary discharge and used to guide ultrashort laser pulses at intensities of the order of 10{sup 16} W/cm{sup 2}. The electron density in the plasma waveguide was measured to be 1x10{sup 18} cm{sup -3}, in agreement with one-dimensional magnetrohydrodynamic (MHD) simulations. The MHD code was also used to evaluate the degree of ionization of argon (Ar) in the preformed plasma waveguide. The maximum ion charge state of Ar{sup 3+} in capillary discharge was measured and obtained in the MHD simulations. The spectrum of the propagated laser pulse in the Ar plasma waveguide was not modified and was well reproduced by a particle-in-cell simulations under initial ion charge state of Ar{sup 3+} in the preformed plasma waveguide. The optimum timing for the laser pulse injection was around 150 ns after initiation of a discharge with a peak current of 200 A.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Plasma parameters and electromagnetic forces induced by the magneto hydro dynamic interaction in a hypersonic argon flow experiment

This work proposes an experimental analysis on the magneto hydro dynamic (MHD) interaction induced by a magnetic test body immersed into a hypersonic argon flow. The characteristic plasma parameters are measured. They are related to the voltages arising in the Hall direction and to the variation of the fluid dynamic properties induced by the interaction. The tests have been performed in a hypersonic wind tunnel at Mach 6 and Mach 15. The plasma parameters are measured in the stagnation region in front of the nozzle of the wind tunnel and in the free stream region at the nozzle exit. The test body has a conical shape with the cone axis in the gas flow direction and the cone vertex against the flow. It is placed at the nozzle exit and is equipped with three permanent magnets. In the configuration adopted, the Faraday current flows in a closed loop completely immersed into the plasma of the shock layer. The electric field and the pressure variation due to MHD interaction have been measured on the test body walls. Microwave adsorption measurements have been used for the determination of the electron number density and the electron collision frequency. Continuum recombination radiation and line radiation emissions have been detected. The electron temperature has been determined by means of the spectroscopic data by using different methods. The electron number density has been also determined by means of the Stark broadening of H{sub {alpha}} and the H{sub {beta}} lines. Optical imaging has been utilized to visualize the pattern of the electric current distribution in the shock layer around the test body. The experiments show a considerable effect of the electromagnetic forces produced by the MHD interaction acting on the plasma flow around the test body. A comparison of the experimental data with simulation results shows a good agreement.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Internal disruptions and sawtooth like activity in Large Helical Device

Large Helical Device (LHD) inward-shifted configurations are unstable to resistive magnetohydrodynamic (MHD) pressure-gradient-driven modes. These modes drive sawtooth like events during LHD operation. In this work, we simulate sawtooth like activity and internal disruptions in order to improve the understanding of these relaxation events and their effect over the device efficiency to confine the plasma, with the aim to improve the LHD present and future operation scenarios minimizing or avoiding the disadvantageous MHD soft and hard limits. By solving a set of reduced non-linear resistive MHD equations, we have studied the evolution of perturbations to equilibria obtained before and after a sawtooth like event in LHD. The equilibrium {beta} value is gradually increased during the simulation until it reaches the experimental value. Sawtooth like events and internal disruption events take place in the simulation for {beta}{sub 0} values between 1% and 1.48%. The main driver of the sawtooth like events is the resonant and non-resonant effect of the (n = 1, m = 3) mode. The instability is stronger for resonant events, and they only appear when {beta}{sub 0} = 1.48%. Internal disruptions are mainly driven by the (n = 1, m = 2) mode, and they extend throughout the whole plasma core. Internal disruption events do not show up when resonant sawtooth like events are triggered.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The effect of emissive biased limiter on the magnetohydrodynamic modes in the IR-T1 tokamak

A moveable emissive biased limiter (EBL) for the investigation of spatial and temporal structure of MHD modes in IR-T1 tokamak, based on mirnov oscillations, was designed and constructed. The biasing has been considered to improve the global confinement by setting up an electric field at the plasma edge. Radial electric field (E{sub r}) modifies edge plasma turbulence, plasma rotation, and transport. Mirnov oscillations using singular value decomposition (SVD) and wavelet techniques were analyzed. SVD algorithm has been employed to analyze the frequency and wavenumber harmonics of the MHD fluctuations. The time-resolved frequency component analysis has been performed using wavelets. The EBL was applied to plasma at 10 ms with negative polarity. The results show that after applying EBL, the m = 2 mode is grown, m = 3 mode is suppressed, and H{sub {alpha}} radiation is decreased. Furthermore, results of the wavelet analysis of mirnov coil in the time range of 8-12 ms indicate that 1.5 ms after applying EBL, the MHD frequency is reduced from 45 kHz to 25 kHz.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Ertel's vorticity theorem and new flux surfaces in multi-fluid plasmas

Dedicated to Professor Harold Weitzner on the occasion of his retirement“Say to wisdom ‘you are my sister,’ and to insight ‘you are my relative.’”—Proverbs 7:4Based on an extension to plasmas of Ertel's classical vorticity theorem in fluid dynamics, it is shown that for each species in a multi-fluid plasma there can be constructed a set of nested surfaces that have this species' fluid particles confined within them. Variational formulations for the plasma evolution and its equilibrium states are developed, based on the new surfaces and all of the dynamical conservation laws associated with them. It is shown that in the general equilibrium case, the energy principle lacks a minimum and cannot be used as a stability criterion. A limit of the variational integral yields the two-fluid Hall-magnetohydrodynamic (MHD) model. A further special limit yields MHD equilibria and can be used to approximate the equilibrium state of a Hall-MHD plasma in a perturbative way.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Plasma flow at a high Mach-number

Unlike the case of static magnetohydrodynamic (MHD) equilibria, where an expansion in large aspect ratio of toroidal devices is common, cases of MHD equilibria with flow are rarely treated this way, and when this is done the expansion tends to be only partial. The main reason for the difference seems to be the difficulty of expanding the larger system of equilibrium equations with flow. Here, we use a recent expansion technique which employs a variational principle to simplify the process [E. Hameiri, Phys. Plasmas 20, 024504 (2013)]. We treat four cases of MHD equilibria with flow, developing their asymptotic expansions in full, and for an application consider the effect of the flow on the Shafranov shift.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Global invariants in ideal magnetohydrodynamic turbulence

Magnetohydrodynamic (MHD) turbulence is an important though incompletely understood factor affecting the dynamics of many astrophysical, geophysical, and technological plasmas. As an approximation, viscosity and resistivity may be ignored, and ideal MHD turbulence may be investigated by statistical methods. Incompressibility is also assumed and finite Fourier series are used to represent the turbulent velocity and magnetic field. The resulting model dynamical system consists of a set of independent Fourier coefficients that form a canonical ensemble described by a Gaussian probability density function (PDF). This PDF is similar in form to that of Boltzmann, except that its argument may contain not just the energy multiplied by an inverse temperature, but also two other invariant integrals, the cross helicity and magnetic helicity, each multiplied by its own inverse temperature. However, the cross and magnetic helicities, as usually defined, are not invariant in the presence of overall rotation or a mean magnetic field, respectively. Although the generalized form of the magnetic helicity is known, a generalized cross helicity may also be found, by adding terms that are linear in the mean magnetic field and angular rotation vectors, respectively. These general forms are invariant even in the presence of overall rotation and a mean magnetic field. We derive these general forms, explore their properties, examine how they extend the statistical theory of ideal MHD turbulence, and discuss how our results may be affected by dissipation and forcing.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗