Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MEMORY DEVICES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,639 records · Page 91

Programmable synaptic devices for electronic neural nets

The architecture, design, and operational characteristics of custom VLSI and thin film synaptic devices are described. The devices include CMOS-based synaptic chips containing 1024 reprogrammable synapses with a 6-bit dynamic range, and nonvolatile, write-once, binary synaptic arrays based on memory switching in hydrogenated amorphous silicon films. Their suitability for embodiment of fully parallel and analog neural hardware is discussed. Specifically, a neural network solution to an assignment problem of combinatorial global optimization, implemented in fully parallel hardware using the synaptic chips, is described. The network's ability to provide optimal and near optimal solutions over a time scale of few neuron time constants has been demonstrated and suggests a speedup improvement of several orders of magnitude over conventional search methods.

Moopenn, A.↗

Performance of a Smart Vibration Isolator for Precision Spacecraft Instruments

Under the ARPA SMS Partnership Program for Synthesis and Processing of Smart Materials, Lockheed Missiles and Space company, Inc. has developed a demonstration prototype vibration cancelling mount using electrostrictive ceramic and shape-memory alloy actuators. Shape-memory actuators provide an adaptive-passive, self-damping support for isolation, while the electrostrictive actuators are employed to provide force and position control. The demonstration device was designed to address generic requirements for vibration stabilization of precision spacecraft instruments. It is reconfigurable to operate in any of four modes; passive isolation, active-passive isolation using force cancellation, active precision positioning, and active disturbance rejection. The presentation summarizes design of the device design and results of experimental evaluations of the device in isolation (active and passive) and positioning modes. Rejection of payload-borne disturbances is also discussed with reference to predictions from experimentally calibrated simulations. Finally, avenues for further development and refinement of the device are discussed.

Regelbrugge, Marc E.↗

Real Sky Performance of the Prototype sted Advanced Stellar Compass

The Danish microsatellite, sted, is equipped with an autonomous, advanced stellar compass (ASC). The ASC consists of two separate units, a Charge Coupled Device (CCD) camera head (based on a commercial Sony interline CCD detector) and a data processing unit with a powerful microcomputer (Intel 80486 type processor). The microcomputer memory contains a star catalogue which enables the microcomputer to recognize the constellations of stars in the field of vies and thus derive the attitude of the ASC camera head. The mission, and the design, operation and performance of the ASC are described. Results of the ASC prototype tests at the Jet Propulsion Laboratory (JPL) Table Mountain Observatory (TMO) facility are given.

orstedautonomous advanced stellar compass ASC adva↗

Smart material based multilayered microbeam structures for spatial self-deployment and reconfiguration: A residual stress approach

Alleviation of the potentially damaging effects induced by residual stresses was comprehensively investigated in previous research. Here, this paper, however, presents a spatially self-deployable and reconfigurable multilayered microbeam which takes advantage of residual stresses and shape memory effects. Reconfigurable mechanism of a typical four-layered microbeam composed of Pt\Ni 50 Ti 50 \Ni 50 Ti 50 \Pt is introduced, followed by analytical modeling of the maximum distance of the self-deployed gap as functions of variable structural and material parameters, including compressive residual stress in Pt layers and tensile residual stress in Ni 50 Ti 50 layers. Analytical solutions given by the static model agree well with the results obtained via finite element models (FEMs). Fabrication, characterization, and in-situ experiments were carried out to validate the feasibility of deployment of the as-released four-layered microbeam. The maximum distance of the gap was measured to be 41.39 μm at 20 °C, which could be increased to 51.73 μm thanks to controllable reconfiguration driven by shape memory effects. Theoretical analysis of such self-deployment and reconfiguration suggested a tensile residual stress increase by 52 MPa in Ni 50 Ti 50 layers. The multilayered microbeam structure with capabilities of self-deployment and reconfiguration offers great potential for various emerging applications, such as micro robotics, medical drug delivery devices, and intelligent chip scale spacecraft.

36 MATERIALS SCIENCE↗

Recent Additions in the Modeling Capabilities of an Open-Source Wave Energy Converter Design Tool: Preprint

WEC-Sim is a midfidelity numerical tool for modeling wave energy conversion devices. The code uses the MATLAB SimMechanics package to solve multibody dynamics and models wave interactions using hydrodynamic coefficients derived from frequency-domain boundary-element methods. This paper presents the new modeling features introduced in the latest release of WEC-Sim. The first feature discussed conversion of the fluid memory kernel to a state-space form. This enhancement offers a substantial computational benefit after the hydrodynamic body-to-body coefficients are introduced and the number of interactions increases exponentially with each additional body. Additional features include the ability to calculate the wave-excitation forces based on the instantaneous incident wave angle, allowing the device to weathervane, as well as import a user-defined wave elevation time series. A review of the hydrodynamic theory for each feature is provided and the successful implementation is verified using test cases.

16 TIDAL AND WAVE POWER↗

Software-Hardware Co-design of Heterogeneous SmartNIC System for Recommendation Models Inference and Training

Deep Learning Recommendation Models (DLRMs) are critical applications in various domains and have evolved as one of the single largest machine learning applications. Trillions of DLRM parameters exceed the on-chip memory capacity of GPUs. Large-scale multi-node systems are required for distributed DLRM inference and training, which suffer from the all-to-all communication bottleneck, mainly limiting the scalability of ever-growing DLRMs. In recent years, SmartNICs have evolved with coupled computation and communication capabilities providing opportunities for a powerful heterogeneous device in the system. However, there isn't such a distributed system that fully leverages the abundant smartNIC resources that resolve the scalability issue of DLRMs. In this work, we proposed a software-hardware co-design of a heterogeneous smartNIC system that resolves the communication bottleneck of distributed DLRMs, mitigates the memory bandwidth pressure, and improves computation efficiency. We provide a set of smartNIC designs of cache systems (including local cache and remote cache) and smartNIC computation kernels which reduce data movement, relieve memory lookup intensity, and improve the GPU's computation efficiency. In addition, we propose a graph algorithm that improves the data locality of queries within batches which optimizes the overall system performance with higher data reuse. Our evaluation shows that our system achieves 2.1x latency speedup for inference and 1.6x throughput speedup for training.

Guo, Anqi↗

Electrical characteristics of ZnO nanorods reinforced polymer nanocomposite thin films

ZnO nanorods have been prepared by simple chemical method, which is used to fabricate organic bistable devices (OBDs). OBDs are fabricated by incorporating different weight percent (wt %) of chemically synthesized Zinc Oxide (ZnO) nanorods into polymethylmethacrylate (PMMA). Current-voltage (I-V) measurements of the spin coated ZnO+PMMA nanocomopsite thin film on indium tin oxide (ITO) coated glass substrate showed current hysteresis behaviour, which is an indication of memory effect. The samples exhibit two distinct resistance states, ON and OFF states, characterised by relatively low and high resistance of the OBDs, respectively. It is also observed that with change in ZnO dopant concentration the value of ON/OFF current changes. Higher ON/OFF current ratio is desired for practical applications. Current conduction mechanism of the devices has been explained invoking various existing models, and it has been found that the trapped-charge-limited conduction mechanism was dominant in our samples.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Voltage-controlled low-energy switching of nanomagnets through Ruderman-Kittel-Kasuya-Yosida interactions for magnetoelectric device applications

In this article, we consider through simulation low-energy switching of nanomagnets via electrostatically gated inter-magnet Ruderman-Kittel-Kasuya-Yosida (RKKY) interactions on the surface of three-dimensional topological insulators, for possible memory and nonvolatile logic applications. We model the possibility and dynamics of RKKY-based switching of one nanomagnet by coupling to one or more nanomagnets of set orientation. Potential applications to both memory and nonvolatile logic are illustrated. Sub-attojoule switching energies, far below conventional spin transfer torque (STT)-based memories and even below CMOS logic appear possible. Switching times on the order of a few nanoseconds, comparable to times for STT switching, are estimated for ferromagnetic nanomagnets, but the approach also appears compatible with the use of antiferromagnets which may allow for faster switching.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Using Explainable Artificial Intelligence to Predict Perovskite Solar Cell Electrical Metastability from Operando Photoluminescence Images in Accelerated Stress Testing

Metal halide perovskite (MHP) solar cells exhibit a metastable response to bias governed by coupled ionic–electronic processes, complicating the conventional reciprocity relation between luminescence intensity and device open-circuit voltage (V oc ). This limits the use of luminescence as a diagnostic for device screening or accelerated stress testing, motivating new approaches that can interpret photoluminescence (PL) signals under nonequilibrium conditions. From the artificial intelligence perspective, we develop an explainable deep learning framework that integrates convolutional neural networks (CNN), long short-term memory (LSTM) layers, and an attention mechanism to learn spatiotemporal features from operando photoluminescence PL image sequences. The model achieves a mean absolute error of ±0.027 V in predicting open-circuit voltage transients and reduces extreme-tail errors by up to 78% compared to physics-based reciprocity calculations. Gradient-weighted Class Activation Mapping (Grad-CAM) provides interpretability by highlighting physically meaningful regions such as electrode edges and emergent defect features. From the engineering application perspective, this framework enables accurate, contactless prediction of device V oc and identification of degradation-relevant features during accelerated aging of perovskite solar cells. This approach demonstrates how explainable AI can enhance operando diagnostics and reliability analysis in photovoltaic devices under nonequilibrium conditions.

14 SOLAR ENERGY↗

Detection of ferromagnetic domain wall pinning and depinning with a semiconductor device

We demonstrate the detection of a ferromagnetic domain wall using a nanoscale Hall cross. A narrow permalloy wire is defined lithographically on top of a Hall cross fabricated from an InAs quantum well. The width of the Hall cross (500 nm–1 μm) is similar to the width of the ferromagnetic wire (200–500 nm), and a geometric pinning site is fabricated in the ferromagnetic wire to trap a domain wall within the area of the Hall cross. The devices provide a signal that is often the same order of magnitude as the offset Hall voltage when a domain wall is located above the Hall cross, and may be useful for memory applications. Different geometries for the Hall cross and ferromagnetic wire are tested, and radiofrequency pulses are sent into the wire to demonstrate current driven domain wall motion. Further changes to the Hall bar geometry with respect to the wire geometry are investigated by numerical computation. A large gain in signal is seen for Hall bars only slightly wider than the ferromagnetic wires as compared to those twice as wide, as well as a larger sensitivity to the exact position of the domain wall with respect to the center of the Hall cross.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Testing of the Authenticatable Container Tracking System (ACTS)

The Authenticatable Container Tracking System (ACTS) is being designed to provide a secure container tag that can be used to optimize chain-of-custody monitoring for packaged nuclear materials as they are being stored, processed, and transported. ACTS is an active device that uses an almost-universal core platform that can be appropriately configured to provide the necessary data acquisition, data logging, and communications functions needed for 21st century material accountancy, monitoring, and tracking applications. The core design supports active monitoring of containment, movement, and location and provides secure data transmission via selectable communication methods that can be used throughout the world. This core architecture enables appropriately designed modules to be easily interfaced to the basic system, thus providing an integration path for current and new technologies. ACTS contains a built-in set of sensors but also supports an expansion bus for up to six additional communications, tracking, or sensing modules that may enhance monitoring and tracking of particular containers for specific applications. ACTS stores events in memory, communicates activity to Argonne National Laboratory’s ARG-US TransPort tracking and information server, and provides options for data encryption and authentication. We are currently beginning a testing phase that will field five devices outdoors in a controlled environment to allow evaluation of the functionality of the systems and the hardness of the devices to outdoor conditions. Partners for this system are Oak Ridge National Laboratory, Argonne National Laboratory, Savannah River National Laboratory, Pacific Northwest National Laboratory, and commercialization partner The Aquila Group.

Britton Jr, Chuck↗

HybridPlan: A Capacity Planning Technique for Projecting Storage Requirements in Hybrid Storage Systems

Economic forces, driven by the desire to introduce flash into the high-end storage market without changing existing software-base, have resulted in the emergence of solid-state drives (SSDs), flash packaged in HDD form factors and capable of working with device drivers and I/O buses designed for HDDs. Unlike the use of DRAM for caching or buffering, however, certain idiosyncrasies of NAND Flash-based solid-state drives (SSDs) make their integration into hard disk drive (HDD)-based storage systems nontrivial. Flash memory suffers from limits on its reliability, is an order of magnitude more expensive than the magnetic hard disk drives (HDDs), and can sometimes be as slow as the HDD (due to excessive garbage collection (GC) induced by high intensity of random writes). Given the complementary properties of HDDs and SSDs in terms of cost, performance, and lifetime, the current consensus among several storage experts is to view SSDs not as a replacement for HDD, but rather as a complementary device within the high-performance storage hierarchy. Thus, we design and evaluate such a hybrid storage system with HybridPlan that is an improved capacity planning technique to administrators with the overall goal of operating within cost-budgets. HybridPlan is able to find the most cost-effective hybrid storage configuration with different types of SSDs and HDDs

Capacity Planning↗

Localised nanoscale resistive switching in GaP thin films with low power consumption

Nanoscale localisation of the electroforming-free resistive switching (RS) behaviour in polycrystalline GaP thin films has been observed for the first time. A combination of conductive atomic force microscopy and first-order reversal curve current–voltage measurements indicated that the grain boundaries are the preferred sites for the formation of the conductive switching filaments. It is proposed, based on TEM and XPS results, that local electrochemical migration of Ga ions along the grain boundaries plays a critical role in the switching mechanism. In the low-resistance (ON) state, the conduction mechanism was found to be the space-charge-limited current mechanism, while the high-resistance (OFF) state was governed by the Frenkel–Poole mechanism. Here, a high OFF/ON resistance ratio (~10 4 ) and lower power consumption than current RS devices, in addition to the easy integration of GaP with silicon substrates, make these GaP films promising for future applications in future non-volatile resistive random access memory (RRAM).

36 MATERIALS SCIENCE↗

Polarization rotation in a ferroelectric BaTiO 3 film through low-energy He-implantation

Domain engineering in ferroelectric thin films is crucial for next-generation microelectronic and photonic technologies. Here, a method is demonstrated to precisely control domain configurations in BaTiO 3 thin films through low-energy He ion implantation. The approach transforms a mixed ferroelectric domain state with significant in-plane polarization into a uniform out-of-plane tetragonal phase by selectively modifying the strain state in the film’s top region. This structural transition significantly improves domain homogeneity and reduces polarization imprint, leading to symmetric ferroelectric switching characteristics. The demonstrated ability to manipulate ferroelectric domains post-growth enables tailored functional properties without compromising the coherently strained bottom interface. The method’s compatibility with semiconductor processing and ability to selectively modify specific regions make it particularly promising for practical implementation in integrated devices. This work establishes a versatile approach for strain-mediated domain engineering that could be extended to a wide range of ferroelectric systems, providing new opportunities for memory, sensing, and photonic applications where precise control of polarization states is essential.

36 MATERIALS SCIENCE↗

Electrical control of magnetism by electric field and current-induced torques

The remanent magnetization of ferromagnets has long been studied and used to store binary information. While early magnetic memory designs relied on magnetization switching by locally generated magnetic fields, key insights in condensed matter physics later suggested the possibility of doing it by electrical means instead. In the 1990s, Slonczewski and Berger formulated the concept of current-induced spin torques in magnetic multilayers through which a spin-polarized current generated by a first ferromagnet may be used to switch the magnetization of a second one. This discovery drove the development of spin-transfer-torque magnetic random-access memories (MRAMs). More recent fundamental research revealed other types of current-induced torques named spin-orbit torques (SOTs) and will lead to a new generation of devices including SOT MRAMs and skyrmion-based devices. Parallel to these advances, multiferroics and their magnetoelectric coupling, first investigated experimentally in the 1960s, experienced a renaissance. Dozens of multiferroic compounds with new magnetoelectric coupling mechanisms were discovered and high-quality multiferroic films were synthesized (notably of BiFeO 3 ), also leading to novel device concepts for information and communication technology such as the magnetoelectric spin-orbit (MESO) transistor. The story of the electrical switching of magnetization, which is discussed in this review, is that of a dance between fundamental research (in spintronics, condensed matter physics, and materials science) and technology (MRAMs, MESO transistors, microwave emitters, spin diodes, skyrmion-based devices, components for neuromorphics, etc.). This pas de deux has led to major scientific and technological breakthroughs in recent decades (such as the conceptualization of pure spin currents, the observation of magnetic skyrmions, and the discovery of spin-charge interconversion effects). As a result, this field has not only propelled MRAMs into consumer electronics products but also fueled discoveries in adjacent research areas such as ferroelectrics or magnonics. Here, in this review, recent advances in the control of magnetism by electric fields and by current-induced torques are covered. Fundamental concepts in these two directions are reviewed first, their combination is then discussed, and finally current various families of devices harnessing the electrical control of magnetic properties for various application fields are addressed. The review concludes by giving perspectives in terms of both emerging fundamental physics concepts and new directions in materials science.

36 MATERIALS SCIENCE↗

Safeguards Technology Factsheet - Unattended Dual Current Monitor (UDCM)

The UDCM is a low-current measurement device designed to record sub-nano-amp to micro-amp currents from radiation detectors. The UDCM is a two-channel device that incorporates a Commercial-Off-The-Shelf (COTS) processor enabling both serial over USB as well as Ethernet communications. The instrument includes microSD and USB flash memory for data storage as well as a programmable High Voltage (HV) power supply for detector bias. The UDCM is packaged in the same enclosure, employs the same processor and has a similar user interface as the UMSR. A serial over USB communication line to the UDCM allows the use of existing versions of MIC software, while the Ethernet port is compatible with the new IAEA RAINSTORM communication protocol.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Polarization rotation in a ferroelectric BaTiO$_3$ film through low-energy He-implantation

Domain engineering in ferroelectric thin films is crucial for next-generation microelectronic and photonic technologies. Here, a method is demonstrated to precisely control domain configurations in BaTiO$_3$ thin films through low-energy He ion implantation. The approach transforms a mixed ferroelectric domain state with significant in-plane polarization into a uniform out-of-plane tetragonal phase by selectively modifying the strain state in the film's top region. This structural transition significantly improves domain homogeneity and reduces polarization imprint, leading to symmetric ferroelectric switching characteristics. The demonstrated ability to manipulate ferroelectric domains post-growth enables tailored functional properties without compromising the coherently strained bottom interface. The method's compatibility with semiconductor processing and ability to selectively modify specific regions make it particularly promising for practical implementation in integrated devices. This work establishes a versatile approach for strain-mediated domain engineering that could be extended to a wide range of ferroelectric systems, providing new opportunities for memory, sensing, and photonic applications where precise control of polarization states is essential.

Luo, Liang [Ames Laboratory (AMES), Ames, IA (Unit↗