Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Jets”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,639 records · Page 91

A new calibration method for charm jet identification validated with proton-proton collision events at $\sqrt{s}$ =13 TeV

Many measurements at the LHC require efficient identification of heavy-flavour jets, i.e. jets originating from bottom (b) or charm (c) quarks. An overview of the algorithms used to identify c jets is described and a novel method to calibrate them is presented. This new method adjusts the entire distributions of the outputs obtained when the algorithms are applied to jets of different flavours. It is based on an iterative approach exploiting three distinct control regions that are enriched with either b jets, c jets, or light-flavour and gluon jets. Results are presented in the form of correction factors evaluated using proton-proton collision data with an integrated luminosity of 41.5 fb$^{-1}$ at √s = 13 TeV, collected by the CMS experiment in 2017. The closure of the method is tested by applying the measured correction factors on simulated data sets and checking the agreement between the adjusted simulation and collision data. Furthermore, a validation is performed by testing the method on pseudodata, which emulate various mismodelling conditions. The calibrated results enable the use of the full distributions of heavy-flavour identification algorithm outputs, e.g. as inputs to machine-learning models. Thus, they are expected to increase the sensitivity of future physics analyses.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Determination of Jet Energy Calibration and Transverse Momentum Resolution in CMS

Measurements of the jet energy calibration and transverse momentum resolution in CMS are presented, performed with a data sample collected in proton-proton collisions at a centre-of-mass energy of 7 TeV, corresponding to an integrated luminosity of 36 inverse picobarns. The transverse momentum balance in dijet and gamma/Z+jets events is used to measure the jet energy response in the CMS detector, as well as the transverse momentum resolution. The results are presented for three different methods to reconstruct jets: a calorimeter-based approach, the 'Jet-Plus-Track' approach, which improves the measurement of calorimeter jets by exploiting the associated tracks, and the 'Particle Flow' approach, which attempts to reconstruct individually each particle in the event, prior to the jet clustering, based on information from all relevant subdetectors.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

DO JETS PRECESS... OR EVEN MOVE AT ALL?

Observations of accreting black holes often provoke suggestions that their jets precess. The precession is usually supposed to result from a combination of the Lense-Thirring effect and accretion disk viscosity. We show that this is unlikely for any type of black hole system, as the disk generally has too little angular momentum compared with a spinning hole to cause any significant movement of the jet direction across the sky on short timescales. Uncorrelated accretion events, as in the chaotic accretion picture of active galactic nuclei (AGNs), change AGN jet directions only on timescales {approx}> 10{sup 7} yr. In this picture AGN jet directions are stable on shorter timescales, but uncorrelated with any structure of the host galaxy, as observed. We argue that observations of black hole jets precessing on timescales short compared to the accretion time would be a strong indication that the accretion disk, and not the standard Blandford-Znajek mechanism, is responsible for driving the jet. This would be particularly convincing in a tidal disruption event. We suggest that additional disk physics is needed to explain any jet precession on timescales short compared with the accretion time. Possibilities include the radiation warping instability, or disk tearing.

79 ASTRONOMY AND ASTROPHYSICS↗

A 'BOOSTED FIREBALL' MODEL FOR STRUCTURED RELATIVISTIC JETS

We present a model for relativistic jets which generates a particular angular distribution of Lorentz factor and energy per solid angle. We consider a fireball with specific internal energy E/M launched with bulk Lorentz factor γ {sub B}. In its center-of-momentum frame the fireball expands isotropically, converting its internal energy into radially expanding flow with asymptotic Lorentz factor η{sub 0} ∼ E/M. In the lab frame the flow is beamed, expanding with Lorentz factor Γ = 2η{sub 0}γ {sub B} in the direction of its initial bulk motion and with characteristic opening angle θ{sub 0} ∼ 1/γ {sub B}. The flow is jet-like with Γθ{sub 0} ∼ 2η{sub 0} such that jets with Γ > 1/θ{sub 0} are naturally produced. The choice η{sub 0} ∼ γ {sub B} ∼ 10 yields a jet with Γ ∼ 200 on-axis and angular structure characterized by opening angle θ{sub 0} ∼ 0.1 of relevance for cosmological gamma-ray bursts (GRBs), while γ {sub B} ∼> 1 may be relevant for low-luminosity GRBs. The model produces a family of outflows, of relevance for different relativistic phenomena with structures completely determined by η{sub 0} and γ {sub B}. We calculate the energy per unit solid angle for the model and use it to compute light curves for comparison with the widely used top-hat model. The jet break in the boosted fireball light curve is greatly subdued when compared to the top-hat model because the edge of the jet is smoother than for a top-hat. This may explain missing jet breaks in afterglow light curves.

79 ASTRONOMY AND ASTROPHYSICS↗

Black hole to breakout: 3D GRMHD simulations of collapsar jets reveal a wide range of transients

We present a suite of the first 3D GRMHD collapsar simulations, which extend from the self-consistent jet launching by an accreting Kerr black hole (BH) to the breakout from the star. We identify three types of outflows, depending on the angular momentum, l, of the collapsing material and the magnetic field, B, on the BH horizon: (i) subrelativistic outflow (low l and high B), (ii) stationary accretion shock instability (SASI; high l and low B), (iii) relativistic jets (high l and high B). In the absence of jets, free-fall of the stellar envelope provides a good estimate for the BH accretion rate. Jets can substantially suppress the accretion rate, and their duration can be limited by the magnetization profile in the star. We find that progenitors with large (steep) inner density power-law indices (≳ 2), face extreme challenges as gamma-ray burst (GRB) progenitors due to excessive luminosity, global time evolution in the light curve throughout the burst and short breakout times, inconsistent with observations. Our results suggest that the wide variety of observed explosion appearances (supernova/supernova + GRB/low-luminosity GRBs) and the characteristics of the emitting relativistic outflows (luminosity and duration) can be naturally explained by the differences in the progenitor structure. Our simulations reveal several important jet features: (i) strong magnetic dissipation inside the star, resulting in weakly magnetized jets by breakout that may have significant photospheric emission and (ii) spontaneous emergence of tilted accretion disc-jet flows, even in the absence of any tilt in the progenitor.

79 ASTRONOMY AND ASTROPHYSICS↗

Measurement of the angle between jet axes in Pb-Pb collisions at $\sqrt{s_{NN}}$ =5.02 TeV

This paper presents the first measurement of the angle between different jet axes (denoted as Δ⁢𝑅 axis ) in Pb-Pb collisions. The measurement is carried out in the 0–10 % most-central events at $\sqrt{s_{NN}}$ = 5.02 TeV. Jets are assembled by clustering charged particles at midrapidity using the anti-𝑘 T algorithm with resolution parameters 𝑅 = 0.2 and 0.4 and transverse momenta in the intervals 40 < 𝑝$^{ch jet}_{T}$ < 140 GeV/𝑐 and 80 < 𝑝$^{ch jet}_{T}$ < 140 GeV/𝑐, respectively. Measurements at these low transverse momenta enhance the sensitivity to quark-gluon plasma (QGP) effects. A comparison to models implementing various mechanisms of jet energy loss in the QGP suggests that the observed narrowing of the Pb-Pb distribution relative to 𝑝𝑝 can be explained if quark-initiated jets are more likely to emerge from the medium than gluon-initiated jets. These new measurements disfavor intrajet 𝑝 T broadening as implemented in a simple model calculation with the Baier-Dokshitzer-Mueller-Peigne-Schiff formalism for energy loss in the QGP. The comparison of Pb-Pb and 𝑝𝑝 collisions shows sensitivity to the angular scale at which the QGP can resolve two independent splittings, favoring mechanisms that incorporate incoherent energy loss.

Acharya, S. [LPC] (ORCID:0000000292135329)↗

Observation of the Jet Diffusion Wake Using Dijets in Heavy-Ion Collisions

Energetic quarks and gluons traversing a hot and dense quark-gluon plasma deposit energy and momentum into the medium before hadronizing to collimated sprays of particles, known as jets. This energy-momentum deposition is expected to produce medium responses, collectively known as jet wakes, with “diffusion wake” denoting a depletion of particles in the direction opposite to the propagating jet. The diffusion wake is studied by comparing dijet-hadron correlations measured in lead-lead (PbPb) and proton-proton (pp) collisions. The analysis uses PbPb and pp data recorded at a nucleon-nucleon (NN) center-of-mass energy s NN = 5.02 TeV with the CMS detector at the CERN LHC. By exploring how the dijet-hadron correlation distributions differ for various pseudorapidity separations of the two jets in the dijet, the presence of a jet diffusion wake is firmly established. The diffusion wake signal has a significance greater than 5 standard deviations for charged particles in the transverse momentum range 1 < p T < 2 GeV . The measurements are compared with model predictions with and without jet wake effects, providing new insights into quark-gluon plasma properties and the formation of jet-induced wakes.

Hayrapetyan, Aram [Yerevan Phys. Inst.]↗

Measurement of jet substructure in boosted $t\overline{t}$ events with the ATLAS detector using 140 fb -1 of 13 TeV $pp$ collisions

Measurements of the substructure of top-quark jets are presented, using 140 fb -1 of 13 TeV pp collision data recorded with the ATLAS detector at the LHC. Top-quark jets reconstructed with the anti-k t algorithm with a radius parameter R = 1.0 are selected in top-quark pair ($t\overline{t}$) events where one top quark decays semileptonically and the other hadronically, or where both top quarks decay hadronically. The top-quark jets are required to have transverse momentum p T > 350 GeV, yielding large samples of data events with jet p T values between 350 and 600 GeV. One- and two-dimensional differential cross sections for eight substructure variables, defined using only the charged components of the jets, are measured in a particle-level phase space by correcting for the smearing and acceptance effects induced by the detector. The differential cross sections are compared with the predictions of several Monte Carlo simulations in which top-quark pair-production quantum chromodynamic matrix-element calculations at next-to-leading-order precision in the strong coupling constant α S are passed to leading-order parton shower and hadronization generators. The Monte Carlo predictions for measures of the broadness, and also the two-body structure, of the top-quark jets are found to be in good agreement with the measurements, while variables sensitive to the three-body structure of the top-quark jets exhibit some tension with the measured distributions.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Calibrating two jets at once

Jet-energy calibration is an important aspect of many measurements and searches at the LHC. Currently, these calibrations are performed on a per-jet basis, i.e., agnostic to the properties of other jets in the same event. In this work, we propose taking advantage of the correlations induced by momentum conservation between jets in order to improve their jet-energy calibration. By fitting the p T asymmetry of dijet events in simulation, while remaining agnostic to the p T spectra themselves, we are able to obtain correlation-improved maximum likelihood estimates. This approach is demonstrated with simulated jets from the CMS detector, yielding a 3%–5% relative improvement in the jet-energy resolution, corresponding to a quadrature improvement of approximately 35%. Published by the American Physical Society 2024

Gambhir, Rikab (ORCID:0000000251080448)↗

Factorization for generic jet production

Factorization is the central ingredient in any theoretical prediction for collider experiments. We introduce a factorization formalism that can be applied to any desired observable, like event shapes or jet observables, for any number of jets and a wide range of jet algorithms in leptonic or hadronic collisions. This is achieved by using soft-collinear effective theory to prove the formal factorization of a generic fully differential cross section in terms of a hard coefficient, and generic jet and soft functions. In this formalism, whether a given observable factorizes in the usual sense, depends on whether it is inclusive enough, so the jet functions can be calculated perturbatively. The factorization formula for any such observable immediately follows from our general result, including the precise definition of the jet and soft functions appropriate for the observable in question. As examples of our formalism, we work out several results in two-jet production for both e{sup +}e{sup -} and pp collisions. For the latter, we also comment on how our formalism allows one to treat underlying events and beam remnants.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Quark fragmentation within an identified jet

We derive a factorization theorem that describes an energetic hadron h fragmenting from a jet produced by a parton i, where the jet invariant mass is measured. The analysis yields a 'fragmenting jet function' G{sub i}{sup h}(s,z) that depends on the jet invariant mass s, and on the energy fraction z of the fragmentation hadron. We show that G{sub i}{sup h} can be computed in terms of perturbatively calculable coefficients, J{sub ij}(s,z/x), integrated against standard nonperturbative fragmentation functions, D{sub j}{sup h}(x). We also show that h{integral}dzG{sub i}{sup h}(s,z) is given by the standard inclusive jet function J{sub i}(s) which is perturbatively calculable in QCD. We use soft collinear effective theory and for simplicity carry out our derivation for a process with a single jet, B{yields}Xhl{nu}, with invariant mass m{sub Xh}{sup 2}>>{Lambda}{sub QCD}{sup 2}. Our analysis yields a simple replacement rule that allows any factorization theorem depending on an inclusive jet function J{sub i} to be converted to a semi-inclusive process with a fragmenting hadron h. We apply this rule to derive factorization theorems for B{yields}XK{gamma} which is the fragmentation to a Kaon in b{yields}s{gamma}, and for e{sup +}e{sup -{yields}}(dijets)+h with measured hemisphere dijet invariant masses.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Evolution of the Jet Opening Angle Distribution in Holographic Plasma

We use holography to analyze the evolution of an ensemble of jets, with an initial probability distribution for their energy and opening angle as in proton-proton (pp) collisions, as they propagate through an expanding cooling droplet of strongly coupled plasma as in heavy ion collisions. We identify two competing effects: (i) each individual jet widens as it propagates and (ii) because wide-angle jets lose more energy, energy loss combined with the steeply falling perturbative spectrum serves to filter wide jets out of the ensemble at any given energy. Even though every jet widens, jets with a given energy can have a smaller mean opening angle after passage through the plasma than jets with that energy would have had in vacuum, as experimental data may indicate.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Study of J / ψ Production in Jets

The production of $J/ψ$ mesons in jets is studied in the forward region of proton-proton collisions using data collected with the LHCb detector at a center-of-mass energy of 13 TeV. The fraction of the jet transverse momentum carried by the $J/ψ$ meson, $z$($J/ψ$)≡$p$ T ($J/ψ$)/$p$ T (jet), is measured using jets with $p$ T (jet) > 20 GeV in the pseudorapidity range 2.5 < $η$(jet) < 4.0. The observed $z$($J/ψ$) distribution for $J/ψ$ mesons produced in b-hadron decays is consistent with expectations. However, the results for prompt $J/ψ$ production do not agree with predictions based on fixed-order nonrelativistic QCD. This is the first measurement of the $p$ T fraction carried by prompt $J/ψ$ mesons in jets at any experiment.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Observation of Medium-Induced Yield Enhancement and Acoplanarity Broadening of Low-𝑝T Jets from Measurements in 𝑝⁢𝑝 and Central Pb-Pb Collisions at $\sqrt{s_{NN}}$ = 5.02 TeV

The ALICE Collaboration reports the measurement of semi-inclusive distributions of charged-particle jets recoiling from a high transverse momentum (high p T ) hadron trigger in proton-proton and central Pb-Pb collisions at $\sqrt{s_{NN}}$ = 5.02 TeV. A data-driven statistical method is used to mitigate the large uncorrelated background in central Pb-Pb collisions. Recoil jet distributions are reported for jet resolution parameter R = 0.2, 0.4, and 0.5 in the range 7 < p T.jet < 140 GeV=c and trigger-recoil jet azimuthal separation π/2 < Δφ < π. The measurements exhibit a marked medium-induced jet yield enhancement at low p T and at large azimuthal deviation from Δφ ~ π. The enhancement is characterized by its dependence on Δφ, which has a slope that differs from zero by 4.7σ. Comparisons to model calculations incorporating different formulations of jet quenching are reported. These comparisons indicate that the observed yield enhancement arises from the response of the QGP medium to jet propagation.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Biorefinery for combined production of jet fuel and ethanol from lipid‐producing sugarcane: a techno‐economic evaluation

Abstract Replacing fossil fuels with an economically viable green alternative at scale has proved most challenging in the aviation sector. Recently sugarcane, the most productive crop on the planet, has been engineered to accumulate lipids. This opens the way for production of far more industrial vegetable oil per acre than previously possible. This study performs techno‐economic feasibility analysis of jet fuel production from this new cost efficient and high yield feedstock. A comprehensive process model for biorefinery producing hydrotreated jet fuel (from lipids) and ethanol (from sugars), with 1 600 000 MT yr −1 lipid‐cane processing capacity, was developed in SuperPro Designer. Considering lipid‐cane development is continuing for higher oil concentrations, analysis was performed with lipid‐cane containing 5%, 10%, 15%, and 20% lipids. Capital investments for the biorefinery ranged from 238.1 to 351.2 million USD , with jet fuel capacities of 12.6–50.5 million liters (correspondingly ethanol production of nil to 102.6 million liters). The production cost of jet fuel for different scenarios was estimated $0.73 to $1.79 per liter ($2.74 to $6.76 per gal) of jet fuel. In all cases, the cost of raw materials accounted for more than 70% of total operational cost. Biorefinery was observed self‐sustainable for steam and electricity requirement, because of in‐house steam and electricity generation from burning of bagasse. Minimum fuel selling prices with a 10% discount rate for 20% lipid case was estimated $1.40/L ($5.31/gal), which was lower than most of the reported prices of renewable jet fuel produced from other oil crops and algae. Along with lower production costs, lipid‐cane could produce as high as 16 times the jet fuel (6307 L ha −1 ) per unit land than that of other oil crops and do so using low‐value land unsuited to most other crops, while being highly water and nitrogen use efficient.

09 BIOMASS FUELS↗

Sweeping Jet Film Cooling on a Turbine Vane

The cooling performance of sweeping jet film cooling was studied on a turbine vane suction surface in a low-speed linear cascade wind tunnel. The sweeping jet holes consist of fluidic oscillators with an aspect ratio (AR) of unity and a hole spacing of Pd/D = 6. Infrared (IR) thermography was used to estimate the adiabatic film effectiveness at several blowing ratios and two different freestream turbulence levels (Tu = 0.3% and 6.1%). Convective heat transfer coefficient was measured by a transient IR technique, and the net heat flux benefit was calculated. The total pressure loss due to sweeping jet film cooling was characterized by traversing a total pressure probe at the exit plane of the cascade. Tests were performed with a baseline shaped hole (SH) (777-shaped hole) for comparison. The sweeping jet hole showed higher adiabatic film effectiveness than the 777-shaped hole in the near hole region. Although the unsteady sweeping action of the jet augments heat transfer, the net positive cooling benefit is higher for sweeping jet holes compared to 777 hole at particular flow conditions. The total pressure loss measurement showed a 12% increase in total pressure loss at a blowing ratio of M = 1.5 for sweeping jet hole, while 777-shaped hole showed a 8% total pressure loss increase at the corresponding blowing ratio.

Engineering↗

Jet and underlying event properties as a function of charged-particle multiplicity in proton-proton collisions at sqrt(s) = 7 TeV

Characteristics of multi-particle production in proton-proton collisions at sqrt(s) = 7 TeV are studied as a function of the charged-particle multiplicity, N[ch]. The produced particles are separated into two classes: those belonging to jets and those belonging to the underlying event. Charged particles are measured with pseudorapidity abs(eta) < 2.4 and transverse momentum pt > 0.25 GeV. Jets are reconstructed from charged-particles only and required to have pt > 5 GeV. The distributions of jet pt, average pt of charged particles belonging to the underlying event or to jets, jet rates, and jet shapes are presented as functions of N[ch] and compared to the predictions of the PYTHIA and HERWIG event generators. Predictions without multi-parton interactions fail completely to describe the N[ch]-dependence observed in the data. For increasing N[ch], PYTHIA systematically predicts higher jet rates and harder pt spectra than seen in the data, whereas HERWIG shows the opposite trends. At the highest multiplicity, the data-model agreement is worse for most observables, indicating the need for further tuning and/or new model ingredients.

HEP↗

Measurement of jet multiplicity distributions in t t-bar production in pp collisions at sqrt(s) = 7 TeV

The normalised differential top quark-antiquark production cross section is measured as a function of the jet multiplicity in proton-proton collisions at a centre-of-mass energy of 7 TeV at the LHC with the CMS detector. The measurement is performed in both the dilepton and lepton + jets decay channels using data corresponding to an integrated luminosity of 5.0 inverse femtobarns. Using a procedure to associate jets to decay products of the top quarks, the differential cross section of the t t-bar production is determined as a function of the additional jet multiplicity in the lepton + jets channel. Furthermore, the fraction of events with no additional jets is measured in the dilepton channel, as a function of the threshold on the jet transverse momentum. The measurements are compared with predictions from perturbative quantum chromodynamics and no significant deviations are observed.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗