Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “INDUSTRY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,639 records · Page 91

Industrializing Offshore Wind Power with Serial Assembly and Lower-cost Deployment - Final Report

A team of engineers and contractors has developed a method to move offshore wind installation toward lower cost, faster deployment, and lower environmental impact. A combination of methods, some incremental and some breaks from past practice, interact to yield multiple improvements. Three designs were evaluated based on detailed engineering: 1) a 5 MW turbine on a jacket with pin piles (base case), 2) a 10 MW turbine on a conventional jacket with pin piles, assembled at sea, and 3) a 10 MW turbine on tripod jacket with suction buckets (caissons) and with complete turbine assembly on-shore. The larger turbine, assembly ashore, and the use of suction buckets together substantially reduce capital cost of offshore wind projects. Notable capital cost reductions are: changing from 5 MW to 10 MW turbine, a 31% capital cost reduction, and assembly on land then single-piece install at sea an additional 9% capital cost reduction. An estimated Design 4) estimates further cost reduction when equipment and processes of Design 3) are optimized, rather than adapted to existing equipment and process. Cost of energy for each of the four Designs are also calculated, yielding approximately the same percentage reductions. The methods of Design 3) analyzed here include accepted structures such as suction buckets used in new ways, innovations conceived but previously without engineering and economic validation, combined with new methods not previously proposed. Analysis of Designs 2) and 3) are based on extensive engineering calculations and detailed cost estimates. All design methods can be done with existing equipment, including lift equipment, ports and ships (except that design 4 assumes a more optimized ship). The design team consists of experienced offshore structure designers, heavy lift engineers, wind turbine designers, vessel operators, and marine construction contractors. Comparing the methods based on criteria of cost and deployment speed, the study selected the third design. That design is, in brief: a conventional turbine and tubular tower is mounted on a tripod jacket, in turn atop three suction buckets. Blades are mounted on the tower, not on the hub. The entire structure is built in port, from the bottom up, then assembled structures are queued in the port for deployment. During weather windows, the fully-assembled structures are lifted off the quay, lashed to the vessel, and transported to the deployment site. The vessel analyzed is a shear leg crane vessel with dynamic positioning like the existing Gulliver, or it could be a US-built crane barge. On site, the entire structure is lowered to the bottom by the crane vessel, then pumping of the suction buckets is managed by smaller service vessels. Blades are lifted into place by small winches operated by workers in the nacelle without lift vessel support. Advantages of the selected design include: cost and time at sea of the expensive lift vessel are significantly reduced; no jack up vessel is required; the weather window required for each installation is shorter; turbine structure construction is continuous with a queue feeding the weather-dependent installation process; pre-installation geotechnical work is faster and less expensive; there are no sound impacts on marine mammals, thus minimal spotting and no work stoppage Industrializing Offshore Wind Power 6 of 96 9 for mammal passage; the entire structure can be removed for decommissioning or major repairs; the method has been validated for current turbines up to 10 MW, and a calculation using simple scaling shows it usable up to 20 MW turbines.

17 WIND ENERGY↗

The Evolving Market Structure of the U.S. Residential Solar PV Installation Industry, 2000-2016

This study uses data on over 900,000 solar PV installations to summarize the evolving market structure of the U.S. residential solar PV installation industry. Over 8,000 companies have installed residential PV systems in the United States. The vast majority of these installers are small local companies. At the same time, a subset of national-scale high-volume PV installation companies hold high market shares. This study examines the factors behind these trends in market concentration, including the role of customer financing options.

14 SOLAR ENERGY↗

Electrification of buildings and industry in the United States: Drivers, barriers, prospects, and policy approaches

The report offers several use cases and case studies of electrification in buildings and industry: air source heat pumps for space heating, zero net energy buildings, electric water heaters and demand response, electric arc furnaces, and electric boilers. Finally, the report suggests several areas for further research to better understand and advance beneficial electrification.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Industrial Control Systems: Cyber Security Risk Candidate Methods Analysis

In recognition of their mission and in response to continuously evolving cyber threats against nuclear facilities, Department of Energy - Nuclear Energy (DOE-NE) is building the Nuclear Energy Cyber security Research, Development, and Demonstration (RD&D) Program, which includes a cyber risk management thrust. This report supports the cyber risk management thrust objective which is to deliver "Standardized methodologies for credible risk-based identification, evaluation and prioritization of digital components." In a previous task, the Sandia National Laboratories (SNL) team presented evaluation criteria and a survey to review methods to determine the most suitable techniques. In this task we will identify and evaluate a series of candidate methodologies. In this report, 10 distinct methodologies are evaluated. The overall goal of this effort was to identify the current range of risk analysis techniques that were currently available, and how they could be applied, with an focus on industrial control systems (ICS). Overall, most of the techniques identified did fall into accepted risk analysis practices, though they generally addressed only one step of the multi-step risk management process. A few addressed multiple steps, but generally their treatment was superficial. This study revealed that the current state of security risk analysis in digital control systems was not comprehensive and did not support a science-based evaluation. The papers surveyed did use mathematical formulation to describe the addressed problems, and tied the models to some kind of experimental or experiential evidence as support. Most of the papers, however, did not use a rigorous approach to experimentally support the proposed models, nor did they have enough evidence supporting the efficacy of the models to statistically analyze model impact. Both of these issues stem from the difficulty and expense associated with collecting experimental data in this domain.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

Technology inventory: energy efficiency measures for residential, commercial, and industrial sectors in the United States

Energy efficiency is expected to continue to be one of main levers for governments to address the energy and climate crisis. While a diverse mix of energy efficiency programs has been regarded as an important part of governmental actions, an energy efficiency policy or program needs to identify and assess eligible savings measures, i.e., specific technologies or practices, for designing key features, e.g., target type, target stringency, covered load, and cost recovery. This report briefly discusses U.S. energy efficiency policies and programs, explores publicly available resources of energy efficiency measures for residential, commercial, and industrial sectors in the U.S., and describes how to compile key measures and characteristics into an integrated spreadsheet database. The database in the initial version offers, for more than 1,200 measures, efficiency or improvement potential, technical notes, costs at a given year, where applicable. Energy efficiency measures compiled here could play an important role in determining savings targets and target stringency under a potential energy efficiency policy such as an energy efficiency resource standard in Korea, and offer significant opportunities for energy efficiency improvement.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Meeting Growing Energy Efficiency Challenges by Supporting the Program Administrator Industry

The Consortium for Energy Efficiency (CEE) received #DE-EE0006367 to assist local energy efficiency programs to work together to meet the growing energy efficiency challenges by supporting the program administrator industry covering the period August 1, 2014 through December 31, 2017, amendments 1-3 inclusive. CEE is a 501c (3) organization promoting voluntary alignment of local, ratepayer-funded energy efficiency programs to increase the energy savings and environmental benefits from their combined efforts. These efficiency programs are typically mandated by state regulatory or legislative bodies and administered by electric and gas utilities or designated state agencies. More than 100 program administrator organizations, representing efforts in 40 states, participated as US members in CEE. In addition, CEE's membership also includes 8 program administrator organizations from 5 Canadian provinces.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Cost of Capturing CO 2 from Industrial Sources

The objective of this National Energy Technology Laboratory (NETL) study is to evaluate the costs associated with capturing carbon dioxide (CO 2 ) from industrial processes. Only those processes with effluent streams containing CO 2 concentrations higher than those found in flue gas from coal-fired power plants (CFPP, ~17 mol %) were considered. The following nine processes were chosen due to either the high purity or large quantity of CO 2 available. The processes are categorized based on CO 2 purity.

20 FOSSIL-FUELED POWER PLANTS↗

Integration of High Temperature Gas-Cooled Reactors into Selected Industrial Process Applications

This report summarizes the material and energy requirements and preliminary economics for conventional and high temperature gas-cooled reactor -integrated processes that recover oil from oil shale, desalinate seawater, and upgrade bitumen to synthetic crude oil. Also included are summaries of other industrial processes that were briefly evaluated, which included processes to produce metallurgical coke and steel. The appendices include more detailed technical analyses for each of the processes. This report updates a prior similar report (INL 2010) by summarizing the additional work accomplished in FY 2011.

42 ENGINEERING↗

State and Local Policy Impacts on the Residential Solar PV Installation Industry

This study explores the effects of state and local policies on local residential solar PV installation industries. The results show that state and local policies affect the number of installers that compete in local PV markets, the relative sizes of those installers, and the market shares of high-volume national-scale installers. Understanding these effects could improve PV policy analysis and yield insights into how to achieve multiple PV policy objectives.

14 SOLAR ENERGY↗

Cost Risk Analysis Framework (CRAFT): An Integrated Risk Analysis Tool and its Application in an Industry Use Case

This report presents the initial application design of the Cost Risk Analysis Framework Tool (CRAFT). The initial concept was formulated from a need to perform financial risk analysis that can be quickly deployable through the nuclear industry to evaluate the risk associated to capital projects and asset management. The design evolved into a framework that can integrate several forms of risk (e.g., not just financial, but also safety related) into a single analysis. In order to reduce the research and development and deployment time, we have decided to use the Risk Analysis Virtual environment (RAVEN) statistical framework as a basis for the CRAFT architecture.

97 MATHEMATICS AND COMPUTING↗

Perspective on the U.S. Coal Industry 2014

This presentation provides an overview of the coal industry, focusing on the United States, but within a global context. Areas covered include coal prices, consumption, production, imports, exports, reserves, productivity measures, and more.

01 COAL, LIGNITE, AND PEAT↗

Developing a Scalable System for Biorecovery of Critical Materials from Industrial Waste with Gluconobacter Oxydans

Organic acid production by Gluconobacter oxydans has been proposed as part of a potential economical and environmentally friendly heterotrophic bioleaching process for recovery of rare earth elements from industrial waste. To provide organic acids in a quantity and at a rate useful for commercial bioleaching, continuous culture of the acid-producing organism will be necessary. The objective of this research project was to determine optimal conditions for continuous cultivation of G. oxydans for production of organic acids. Cultures were subjected to dilution rates ranging from .05 hr -1 to .38 hr -1 to determine the optimum conditions for production of lixiviant agents. Previous studies have identified methods for maximizing production of gluconic acid and 2,5-diketogluconic acid from G. oxydans , yet the utilization of these and other unidentified G. oxydans metabolites for leaching of rare earth metals is largely unexplored. Continuous cultures exhibited sustained organic acid production for at least 110 hours, while batch fermentations showed slowed growth rates after 16 hours. Several parameters, namely optical density, dissolved oxygen, organic acid concentration and pH, were monitored to characterize the steady state conditions of the fermentation process. The observed trend was increasing acidity with decreasing dilution rates, as the lowest dilution rate of 0.05 hr -1 yielded the highest gluconic acid concentration of 176 mM and lowest pH of 2.20. Trace amounts of 2,5-diketogluconic acid were detected only at the 0.05 hr-1 dilution rate, likely because the pH of the bioreactors was not maintained within the window for gluconate dehydrogenase activity [Silberbach, M., et al., Appl Microbiol Biotechnol, 2003. 62(1): p. 92-8].

60 APPLIED LIFE SCIENCES↗

Industrial Boiler, Diesel Fired, Over 100 Million BTU/hr

This unit process models air emissions and heat produced by an industrial-scale diesel fired boiler, producing less than 100 million BTU/hr. To access the model referenced in the report, please visit https://www.netl.doe.gov/energy-analysis/details?id=9130EF60-DC26-45BF-BE02-DB24954EB24B

42 ENGINEERING↗

Advancing Energy Efficiency in Developing Countries: Lessons Learned from Low-Income Residential Experiences in Industrialized Countries

Energy efficiency has great potential to address economic development, energy security, and environmental protection around the world and in developing countries in particular. Low-income residents of developing countries stand to gain significantly from energy efficiency investments. This report presents lessons learned in delivering energy-efficiency programs for low-income households that are taken from experiences in the United States and other member countries of the Organisation for Economic Co-operation and Development (OECD). Lessons learned in delivering energy-efficiency programs to low-income households of industrial countries are summarized from the perspectives of program design, program delivery, and institutions in order to provide best practices that are applicable to countries in different development stages. This report discusses who to target, how to reduce energy burden, coordinating institutional stakeholders, which efficiency tools to use, how to fund low-income energy efficiency programs, screening tools to prioritize projects, outreach strategies, and evaluation methods. The report concludes with a framework for understanding different levels of energy-efficiency interventions based on institutional capacity, political willpower, and resources.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Industry Fire Modeling Enhancement Tools and Methods. Light Water Reactor Sustainability Program report

Modeling and implementing fire safety for nuclear power plants is a costly activity. Because of the complexity of fire phenomenon and multiple operational procedures, it is difficult to computationally provide assurance that the mitigation methods are adequate for critical areas using current analysis methods. An economical method to provide more accurate modeling and optimize mitigation methods is needed to improve nuclear power viability. This report describes the background of current fire model strategy; the first stage of a tool to help reduce resources needed in fire analysis and the plan for the next step in advancing fire. The report lays out the path decided upon by Idaho National Laboratory and Industry representatives to best help reduce costs and improve realism in Fire Probabilistic Risk Analysis.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗