Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “INDIUM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,639 records · Page 91

Structural and phase transformation of A{sup III}B{sup V}(100) semiconductor surface in interaction with selenium

Surfaces of GaAs(100), InAs(100), and GaP(100) substrates thermally treated in selenium vapor have been investigated by transmission electron microscopy and electron probe X-ray microanalysis. Some specific features and regularities of the formation of A{sub 3}{sup III}B{sub 4}{sup VI} (100)c(2 × 2) surface phases and thin layers of gallium or indium selenides A{sub 2}{sup III}B{sub 3}{sup VI} (100) on surfaces of different A{sup III}B{sup V}(100) semiconductors are discussed within the vacancy model of surface atomic structure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Light transmission coefficients by subwavelength aluminum gratings with dielectric layers

Spectral positions of plasmon resonances related to boundaries between a thin aluminum layer and dielectrics (air, glass, VDF–TrFE 65/35 ferroelectric copolymer, and indium tin oxide (ITO)) have been determined in the transmission spectra of aluminum gratings of three types with 30 × 30 μm{sup 2} dimensions and 350-, 400-, and 450-nm line periods. Experimental results agree well with spectral positions of plasmon resonances calculated for the normal incidence of TM-polarized light. In addition, maximum values of transmission coefficients in the region of λ ≈ 900–950 nm have been determined for glass–Al–copolymer and glass–ITO–Al–copolymer structures. These values are close to 100%, which shows that the effective optical aperture is two times greater than the geometric areas of slits.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Dark Conductivity and Photoconductivity of Nonaqueous Liposomes: a New Method for Measuring the Phase-Transition Temperatures of Lipid Membranes

A new method is developed to measure the phase-transition temperatures in artificial phospholipid membranes. This method is based on studying the temperature dependence of dark conductivity and photoconductivity in a symmetric cell with current-conducting indium–tin oxide (ITO) electrodes. Internal electron photoemission into a thin liposome layer is induced by visible and near IR light from the ITO electrodes. This method is applied to study the lyotropic phases in 1,2-dipalmitoyl-rac-glycero-3-phosphocholine (DPPC) and 1,2-distearoyl-sn-glycero-3-phosphocholine (DSPC) with ethylene glycol (EG) and glycerol (G). The results of time-of-flight measurements are used to calculate the carrier mobilities in liposome vesicles. The measurement results are compared with the results obtained by dc conductometry. We are the first to detect the effect of a positive temperature coefficient of resistivity in a liquid-crystal phase. The proposed method makes it possible to detect the phase transitions in lyotropic liquid-crystal systems and, hence, can be used to create biocompatible drug carriers based on thermosensitive liposomes.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Charmonium-state production in heavy-ion collisions

An overview of existing experimental data on the production of charmonium states (J/{psi} and {psi}') at the superproton synchrotron (SPS, CERN) and the relativistic heavy ion collider (RHIC, Brookhaven National Laboratory, United States) is given. The production of J/{psi} mesons shows an anomalous suppression discovered by the NA50 Collaboration (CERN) in collisions of lead nuclei at an energy of 158 GeV per nucleon and confirmed in the NA60 experiment (CERN) in collisions of indium nuclei at the same energy. The suppression of J/{psi} production depends on interaction centrality and becomes anomalous at about 122 participant nucleons in PbPb collisions and at about 86 participant nucleons in InIn collisions. The experimental data in question are compared with the predictions of existing theoretical models. None of the models is able to simultaneously describe data on PbPb and InIn collisions. Data obtained in the PHENIX experiment at RHIC from measurements of J/{psi} production in AuAu and CuCu collisions at an energy of 200 GeV (in the nucleon-nucleon c.m. frame) indicate that the suppression of J/{psi} production at such energies approximately corresponds to the suppression of J/{psi} production in PbPb collisions at SPS. Theoretical models that describe SPS data on PbPb collisions predict a stronger suppression of J/{psi} production. Models that take into account J/{psi}-meson regeneration better describe experimental data obtained at RHIC. Measurement of cross sections for charmonium and bottomonium production at the Large Hadron Collider (LHC, CERN) would make it possible to study the properties of matter and to explore the mechanism of quarkonium production at ultrahigh energy densities and temperature and high transverse momenta, as well as to investigate the effect of the regeneration and suppression of quarkonium production as the energy increases.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Acceleration of heavy multicharged ions in the interaction of a subrelativistic femtosecond laser pulse with a melted metal surface

Results are presented from experimental studies of ion acceleration under the action of femtosecond laser pulses with an intensity of 10{sup 17} W/cm{sup 2}, incident onto the free surfaces of melted gallium and indium. The effect of the polarization direction of a linearly polarized laser pulse and the amplitude of a short prepulse, which precedes the main pulse by several nanoseconds, on the parameters of accelerated ions is investigated. It is found that, even for such a moderate laser intensity, the characteristic velocity of fast ions ejected along the reflected beam is a factor of 1.5 higher than that of ions ejected along the normal to the target surface. It is shown that, as the prepulse energy increases, the hard X-ray yield and the mean energy of hot electrons increase substantially, whereas the velocity of both fast and slow ions decreases appreciably regard-less of laser polarization.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Specific features of implosion of metallized fiber arrays

Implosion of metallized fiber arrays was studied experimentally at the Angara-5-1 facility. The use of such arrays makes it possible to investigate the production and implosion dynamics of plasmas of various metals (such as tin, indium, and bismuth) that were previously unavailable for such studies. The plasma production rates m-dot (in μg/(cm{sup 2} ns)) for different metals were determined and quantitatively compared. Varying the thickness of the metal layer deposited on kapron fibers (the total linear mass of the metal coating being maintained at the level of 220 μg/cm), the current and velocity of the plasma precursor were studied as functions of the thickness of the metal coating. The strong difference in the rates of plasma production from the metal coating and kapron fibers results in the redistribution of the discharge current between the Z-pinch and the trailing fiber plasma. The outer boundary of the plasma produced from the metal coating is found to be stable against instabilities typical of the final stage of implosion of conventional wire arrays.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Electrical properties of n-HgCdTe heteroepitaxial layers modified by ion etching

Electrical properties of MBE-grown n-HgCdTe layers, both undoped and In-doped during growth and modified by ion etching are studied. It is established that initially neutral defects with a concentration {approx}10{sup 17} cm{sup -3} are present in these structures. These defects are activated by ion etching and form donor centers. Comparison of the obtained experimental results with the published data shows that these defects are formed at the growth stage of the structures. After the ion etching is stopped, donor centers decompose and for {approx}5 x 10{sup 3} min, the electron concentration in the structures is stabilized. The obtained data allow one to determine the amount of indium necessary for the obtainment of reproducible electron concentration in n-type regions of HgCdTe-based LED structures formed by ion etching.

36 MATERIALS SCIENCE↗

Electrical and optical properties of InN with periodic metallic in insertions

We report on a growth by molecular beam epitaxy of InN:In semiconductor/metal composite structures containing periodically inserted arrays of In clusters formed by intentional deposition of In metal films in a thickness range of 2-48 monolayers. It was found that indium insertions do not change markedly carrier mobility in the composites, that remains in the 1300-1600 cm{sup 2}/(V s) range, while carrier concentration increases with rising In amount. Spectra of thermally detected optical absorption do not exhibit a noticeable Burstein-Moss shift of a principal absorption edge with increasing the carrier concentration, but rather complicated modification of their shapes.

36 MATERIALS SCIENCE↗

Structure and properties of Cd{sub x}Hg{sub 1-x}Te-metal contacts

A metal-semiconductor contact is a composite structure consisting of several nanodimensional layers. The contact properties depend strongly on the technique of metal deposition. A metal forms chemical compounds with the components of Cd{sub x}Hg{sub 1-x}Te (CMT), thus changing the properties of the surface layer. Mercury is accumulated at the interface with the metal, while tellurium is accumulated on the metal surface. The CMT compounds with metals, heats of their formation, and the Fermi level shifts are reported. The structure and properties of the interfaces between CMT and gold, silver, indium, aluminum, copper, and other metals, as well as the effect of sublayers of other metals and insulators, are described.

36 MATERIALS SCIENCE↗

Application of ITO/Al reflectors for increasing the efficiency of single-crystal silicon solar cells

It is shown that an increase in the efficiency and manufacturability of single-junction single-crystal silicon photoelectric converters of solar energy requires the use of a back-surface reflector based on conductive transparent indium-tin oxide (ITO) 0.25-2 {mu}m thick. To increase the efficiency and reduce the sensitivity to the angle of light incidence on the photoreceiving surface of multijunction photoelectric converters with vertical diode cells based on single-crystal silicon, ITO/Al reflectors with an ITO layer >1 {mu}m thick along vertical boundaries of diode cells should be fabricated. The experimental study of multijunction photoelectric converters with ITO/Al reflectors at diode cell boundaries shows the necessity of modernizing the used technology of ITO layers to achieve their theoretically calculated thickness.

36 MATERIALS SCIENCE↗

Photoprocesses in a semiconducting carbon photocapacitor with a double electrical layer

The possibility is shown of designing a functional hybrid galvanophotocapacitor active system that would be able to use, if necessary, its own chemical energy in darkness instead of only the energy stored during illumination. In experiments, the Bridgman-grown n-type indium monoselenide was used as the photosensitive anode. Electrochemical investigations were carried out in a three-electrode cell with an aprotic solution of electrolyte; 0.4 M lithium-iodide solution in {gamma}-butyrolactone acid and 1M lithium-tetrafluorborate in the same solvent were chosen as the latter.

36 MATERIALS SCIENCE↗

Development and photoelectric properties of In/p-Ag{sub 3}AsS{sub 3} surface-barrier structures

Homogeneous p-Ag{sub 3}AsS{sub 3} bulk single crystals with rhombic structure have been grown by planar crystallization from melts with atomic composition corresponding to this ternary compound. Photosensitive surface-barrier structures based on the interface between the surface of these crystals and thin films of pure indium are fabricated for the first time. The photosensitivity of fabricated structures is studied in natural and linearly polarized light. Photosensitivity spectra of In/p-Ag{sub 3}AsS{sub 3} structures are measured for the first time and used to determine the nature and energy of interband transitions in p-Ag{sub 3}AsS{sub 3} crystals. The phenomenon of natural photopleochroism is studied for surface-barrier structures grown on oriented p-Ag{sub 3}AsS{sub 3} single crystals. It is concluded that Ag{sub 3}AsS{sub 3} single crystals can be used in photoconverters of natural and linearly polarized light.

36 MATERIALS SCIENCE↗

Chlorine adsorption on the InAs (001) surface

Chlorine adsorption on the In-stabilized InAs(001) surface with {zeta}-(4 Multiplication-Sign 2) and {beta}3 Prime -(4 Multiplication-Sign 2) reconstructions and on the Ga-stabilized GaAs (001)-{zeta}-(4 Multiplication-Sign 2) surface has been studied within the electron density functional theory. The equilibrium structural parameters of these reconstructions, surface atom positions, bond lengths in dimers, and their changes upon chlorine adsorption are determined. The electronic characteristics of the clean surface and the surface with adsorbed chlorine are calculated. It is shown that the most energetically favorable positions for chlorine adsorption are top positions over dimerized indium or gallium atoms. The mechanism of chlorine binding with In(Ga)-stabilized surface is explained. The interaction of chlorine atoms with dimerized surface atoms weakens surface atom bonds and controls the initial stage of surface etching.

36 MATERIALS SCIENCE↗

Anomalously low thermal conductivity and thermoelectric properties of new cationic clathrates in the Sn-In-As-I system

Single-crystal samples of cationic clathrates in the Sn-In-As-I system with different indium contents have been synthesized. Their crystal structure has been analyzed and their thermoelectric properties have been measured. These compounds are found to be n-type semiconductors with high absolute values of the Seebeck coefficient (S = 400-600 {mu}V/K) and anomalously low thermal conductivity ({kappa} {<=} 0.4 W/(m/K) at 300 K, which is characteristic of amorphous materials. The reasons for the anomalously low thermal conductivity of these semiconductors are discussed and ways for optimizing their thermoelectric properties are shown.

36 MATERIALS SCIENCE↗

Radiative recombination of hot carriers in narrow-gap semiconductors

The mechanism of the radiative recombination of hot carriers in narrow-gap semiconductors is analyzed using the example of indium antimonide. It is shown that the CHCC Auger recombination process may lead to pronounced carrier heating at high excitation levels. The distribution functions and concentrations of hot carriers are determined. The radiative recombination rate of hot carriers and the radiation gain coefficient are calculated in terms of the Kane model. It is demonstrated that the radiative recombination of hot carriers will make a substantial contribution to the total radiative recombination rate at high carrier concentrations.

36 MATERIALS SCIENCE↗

AlGaInN-based light emitting diodes with a transparent p-contact based on thin ITO films

A method for obtaining transparent conductive ITO (indium-tin oxide) films aimed for use in light emitting diodes of the blue spectral range is developed. The peak external quantum efficiency of light-emitting diodes with a p-contact based on the obtained films reaches 25%, while for similar light-emitting diodes with a standard semitransparent metal contact, it is <10%. An observed increase in the direct voltage drop from 3.15 to 3.37 V does not significantly affect the possibility of applying these films in light-emitting diodes since the optical power of light-emitting diodes with a transparent p-contact based on ITO films exceeds that of chips with metal semitransparent p-contacts with a working current of 20 mA by a factor of almost 2.5. Light-emitting diodes with p-contacts based on ITO films successfully withstand a pumping current that exceeds their calculated working current by a factor of 5 without the appearance of any signs of degradation.

36 MATERIALS SCIENCE↗

Pulsed laser deposition of ITO thin films and their characteristics

The indium tin oxide (ITO) thin films are grown on quartz glass substrates by the pulsed laser deposition method. The structural, electrical, and optical properties of ITO films are studied as a function of the substrate temperature, the oxygen pressure in the vacuum chamber, and the Sn concentration in the target. The transmittance of grown ITO films in the visible spectral region exceeds 85%. The minimum value of resistivity 1.79 Multiplication-Sign 10{sup -4} {Omega} cm has been achieved in the ITO films with content of Sn 5 at %.

36 MATERIALS SCIENCE↗

Absorptivity of semiconductors used in the production of solar cell panels

The dependence of the absorptivity of semiconductors on the thickness of the absorbing layer is studied for crystalline silicon (c-Si), amorphous silicon (a-Si), cadmium telluride (CdTe), copper indium diselenide (CuInSe{sub 2}, CIS), and copper gallium diselenide (CuGaSe{sub 2}, CGS). The calculations are performed with consideration for the spectral distribution of AM1.5 standard solar radiation and the absorption coefficients of the materials. It is shown that, in the region of wavelengths {lambda} = {lambda}{sub g} = hc/E{sub g}, almost total absorption of the photons in AM1.5 solar radiation is attained in c-Si at the thickness d = 7-8 mm, in a-Si at d = 30-60 {mu}m, in CdTe at d = 20-30 {mu}m, and in CIS and CGS at d = 3-4 {mu}m. The results differ from previously reported data for these materials (especially for c-Si). In previous publications, the thickness needed for the semiconductor to absorb solar radiation completely was identified with the effective light penetration depth at a certain wavelength in the region of fundamental absorption for the semiconductor.

36 MATERIALS SCIENCE↗