Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “IMPINGEMENT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,639 records · Page 91
All sourcesNASA NTRSDOE OSTI
NASA NTRS1992

Experimental study of rotor wake/body interactions in hover

Experiments were conducted to document the tip vortex geometries and interactional effects betwen a hovering rotor and a body representing a simplified helicopter fuselage. The wide-field shadowgraph technique was used to visualize the rotor tip vortices and to obtain quantitative information on the trajectories, with and without the presence of the body. It was found that the effects of the body caused significant changes to both the radial contraction and axial displacements of the tip vortices compared to the isolated case. Direct impingement of the tip vortices on the body surface was also observed, and found to cause large local wake deformations. The rotor performance was significantly affected by the body, producing a higher figure of merit relative to the isolated case.

Bagai, A.↗
NASA NTRS1992

Numerical solutions for unsteady subsonic vortical flows around loaded cascades

A frequency domain linearized unsteady aerodynamic analysis is presented for three-dimensional unsteady vortical flows around a cascade of loaded airfoils. The analysis fully accounts for the distortion of the impinging vortical disturbances by the mean flow. The entire unsteady flow field is calculated in response to upstream three-dimensional harmonic disturbances. Numerical results are presented for two standard cascade configurations representing turbine and compressor bladings for a reduced frequency range from 0.1 to 5. Results show that the upstream gust conditions and blade sweep strongly affect the unsteady blade response.

Fang, J.↗
NASA NTRS1993

Manipulation of upstream rotor leading edge vortex and its effects on counter rotating propeller noise

The leading edge vortex of a counter rotating propeller (CRP) model was altered by using shrouds and by turning the upstream rotors to a forward sweep configuration. Performance, flow, and acoustic data were used to determine the effect of vortex impingement on the noise signature of the CRP system. Forward sweep was found to eliminate the leading edge vortex of the upstream blades. Removal of the vortex had little effect on the tone noise at the forward and rear blade passing frequencies (BPF's) but significantly altered both the sound pressure level and directivity of the interaction tone which occurs at the sum of the two BPF's. A separate manipulation of the leading edge vortex performed by installing shrouds of various inlet length on the CRP verified that diverting the vortex path increases the noise level of the interaction tone. An unexpected link has been established between the interaction tone and the leading edge vortex-blade interaction phenomenon.

Squires, Becky↗
NASA NTRS1993

Two-, three-, and four-poster jets in cross flow

In connection with the problems of the ingestion of hot exhaust gases in engines of V/STOL and STOVL aircraft in ground effect, a series of studies have been undertaken. Ground impinging, two- and three-poster jets operating in the presence of cross flow were studied. The current paper is divided into two parts. The first part is a comparison of the low speed, two-, three-, and four-poster jet cases, with respect to the flowfield in the region of interaction between the forward and the jet flows. These include cases with mass balanced inlet suction. An analysis of the inlet entry plane of the low speed two- and three-poster jet cases is also given. In the second part, high speed results for a two jet configuration without inlet suction are given. The results are based on quantitative, marker concentration distributions obtained by digitizing video images.

Vukits, Thomas J.↗
NASA NTRS1993

Turbulence modeling for complex hypersonic flows

The paper presents results of calculations for a range of 2D turbulent hypersonic flows using two-equation models. The baseline models and the model corrections required for good hypersonic-flow predictions will be illustrated. Three experimental data sets were chosen for comparison. They are: (1) the hypersonic flare flows of Kussoy and Horstman, (2) a 2D hypersonic compression corner flow of Coleman and Stollery, and (3) the ogive-cylinder impinging shock-expansion flows of Kussoy and Horstman. Comparisons with the experimental data have shown that baseline models under-predict the extent of flow separation but over-predict the heat transfer rate near flow reattachment. Modifications to the models are described which remove the above-mentioned deficiencies. Although we have restricted the discussion only to the selected baseline models in this paper, the modifications proposed are universal and can in principle be transferred to any existing two-equation model formulation.

Huang, P. G.↗
NASA NTRS1993

A parametric study of bleed in shock boundary layer interactions

A numerical investigation was conducted to study the effect of bleed configuration on oblique-shock wave/turbulent boundary-layer interactions. Bleed is applied through a normal slot across the shock impingement location. The numerical solution to the compressible Navier-Stokes equations is obtained for the turbulent flow throughout the interaction zone and inside the bleed slot for bleed mass flow rates up to 57 percent of the boundary layer mass flow upstream of the interaction. The results indicate that the bleed slot performance improves as the slot width decreases and the length to width ratio increases. This is reflected as an increase in the bleed discharge coefficient and total pressure, and a reduction in the boundary layer momentum and displacement thickness downstream.

Hamed, A.↗
NASA NTRS1993

Takeoff/approach noise for a model counterrotation propeller with a forward-swept upstream rotor

A scale model of a counterrotating propeller with forward-swept blades in the forward rotor and aft-swept blades in the aft rotor (designated F39/A31) has been tested in the NASA Lewis 9- by 15-Foot Anechoic Wind Tunnel. This paper presents aeroacoustic results at a takeoff/approach condition of Mach 0.20. Laser Doppler Velocimeter results taken in a plane between the two rotors are also included to quantify the interaction flow field. The intention of the forward-swept design is to reduce the magnitude of the forward rotor tip vortex and/or wakes which impinge on the aft rotor, thus lowering the interaction tone levels.

Woodward, Richard P.↗
NASA NTRS1993

Spacecraft contamination investigation by direct simulation Monte Carlo - Contamination on UARS/HALOE

A three-dimensional version of the direct simulation Monte Carlo method is adapted to study the contamination environment surrounding a highly detailed model of the Upper Atmosphere Research Satellite, with the ultimate goal of estimating the cumulative level of molecular deposits on critical optical surfaces of the Halogen Occultation Experiment. Emphasis is placed on describing the development of preprocessing codes that simplify the incorporation of geometry and outgassing data into the main run code. A novel use of parallel processing software allows use of multiple processors to solve different regions of the overall flowfield. Initial results relating to contaminant cloud structure, cloud composition, and statistics of simulated molecules impinging on the Halogen Occultation telescope's aperture plane are presented, along with data related to code performance.

Rault, Didier F. G.↗
NASA NTRS1993

Experimental investigations of the time and flow-direction responses of shear-stress-sensitive liquid crystal coatings

Time and flow-direction responses of shearstress-sensitive liquid crystal coatings were explored experimentally. For the time-response experiments, coatings were exposed to transient, compressible flows created during the startup and off-design operation of an injector-driven supersonic wind tunnel. Flow transients were visualized with a focusing Schlieren system and recorded with a 1000 frame/sec color video camera. Liquid crystal responses to these changing-shear environments were then recorded with the same video system, documenting color-play response times equal to, or faster than, the time interval between sequential frames (i.e., 1 millisecond). For the flow-direction experiments, a planar test surface was exposed to equal-magnitude and known-direction surface shear stresses generated by both normal and tangential subsonic jet-impingement flows. Under shear, the sense of the angular displacement of the liquid crystal dispersed (reflected) spectrum was found to be a function of the instantaneous direction of the applied shear. This technique thus renders dynamic flow reversals or flow divergences visible over entire test surfaces at image recording rates up to 1 KHz. Extensions of the technique to visualize relatively small changes in surface shear stress direction appear feasible.

Reda, Daniel C.↗
NASA NTRS1992

The design of virtual spaces and virtual environments

Two examples of displays designed to aid spatial maneuvering are described. The first, a perspective format for a commercial air traffic display, illustrates how geometric distortion may be introduced to insure that an operator can understand a depicted three-dimensional situation. The second, a display for planning small aircraft maneuvers, illustrates how the complex counter-initiative character of orbital maneuvering can be made more tractable by removing higher-order nonlinear control dynamics and allowing independent satisfaction of velocity and plume impingement constraints on orbital changes.

Ellis, Stephen R.↗
NASA NTRS1992

Detection of singly ionized energetic lunar pick-up ions upstream of earth's bow shock

Singly ionized suprathermal ions upstream of the earth's bow shock have been detected by using the time-of-flight spectrometer SULEICA on the AMPTE/IRM satellite. The data were collected between August and December 1985. The flux of the ions in the mass range between 23 and 37 amu is highly anisotropic towards the earth. The ions are observed with a period of about 29 days around new moon (+/- 3 days). The correlation of the energy of the ions with the solar wind speed and the interplanetary magnetic field orientation indicates the relation to the pick-up process. We conclude that the source of these pick-up ions is the moon. We argue that due to the impinging solar wind, atoms are sputtered off the lunar surface, ionized in the sputtering process or by ensuing photoionization and picked up by the solar wind.

Hilchenbach, M.↗
NASA NTRS1993

Numerical study of shock-wave/boundary-layer interactions with bleed

A numerical study was conducted to investigate how bleed through a two-dimensional slot affects shock-wave induced, boundary-layer separation on a flat plate. This study is based on the ensemble-averaged, compressible, Navier-Stokes equations closed by the Baldwin-Lomax, algebraic turbulence model. The algorithm used to obtain solutions was the implicit, partially split, two-factored scheme of Steger. This study examined the effects of the following parameters in controlling shock-wave induced flow separation: location of slot in relation to where the incident shock wave impinged on the boundary layer, size of slot in relation to the boundary-layer thickness, number of slots, spacings between slots, and strength of the incident shock wave. This study also showed the nature of the very complex flowfield about the slot or slots and how the plenum affects the bleed process. The results of this study are relevant to problems where bleed is used to control shock-wave induced, boundary-layer separation (e.g., inside jet engine inlets and wind tunnels).

Hahn, T. O.↗
NASA NTRS1993

Ultraviolet continuum variability and visual flickering in the peculiar object MWC 560

High-speed U-band photometry of the peculiar emission object MWC 560 obtained with the ground-based instrumentation, and V-band photometry obtained with the International Ultraviolet Explorer-Fine Error Sensor indicates irregular brightness variations are quasi-periodic. Multiple peaks of relative brightness power indicate statistically significant quasi periods existing in a range of 3-35 minutes, that are superposed on slower hourly varying components. We present a preliminary model that explains the minute and hourly time-scale variations in MWC 560 in terms of a velocity-shear instability that arises because a white dwarf magnetosphere impinges on an accretion disk. We also find evidence for Fe II multiplet pseudocontinuum absorption opacity in far-UV spectra of CH Cygni which is also present in MWC 560. Both CH Cyg and MWC 560 may be in an evolutionary stage that is characterized by strong UV continuum opacity which changes significantly during outburst, occurring before they permanently enter the symbiotic nebular emission phase.

Michalitsianos, A. G.↗
NASA NTRS1992

Onset conditions for gas phase reaction and nucleation in the CVD of transition metal oxides

A combined experimental/theoretical study is presented of the onset conditions for gas phase reaction and particle nucleation in hot substrate/cold gas CVD of transition metal oxides. Homogeneous reaction onset conditions are predicted using a simple high activation energy reacting gas film theory. Experimental tests of the basic theory are underway using an axisymmetric impinging jet CVD reactor. No vapor phase ignition has yet been observed in the TiCl4/O2 system under accessible operating conditions (below substrate temperature Tw = 1700 K). The goal of this research is to provide CVD reactor design and operation guidelines for achieving acceptable deposit microstructures at the maximum deposition rate while simultaneously avoiding homogeneous reaction/nucleation and diffusional limitations.

Collins, J.↗
NASA NTRS1992

Angularly resolved X-ray photoelectron spectroscopy investigation of PTFE after prolonged space exposure

Monochromatized angularly resolved X-ray photoelectron spectroscopy (ARXPS) was used to study PTFE (Teflon) that had been exposed to an earth orbital environment for approximately six years. The primary interest of the research is on a very reactive component of this environment (atomic oxygen) which, because of the typical orbital velocities of a spacecraft, impinge on exposed surfaces with 5 eV energy. This presentation deals with the method of analysis, the findings as they pertain to a rather complex carbon, oxygen, and fluorine XPS peak analysis, and the character of the valence bands. An improved bias referencing method, based on ARXPS, is also demonstrated for evaluating specimen charging effects. It was found that the polymer molecule tends to resist the atomic oxygen attack by reorienting itself, so that the most electronegative CF3 groups are facing the incoming hyperthermal oxygen atoms. The implications of these findings to ground-based laboratory studies are discussed.

Dalins, I.↗
NASA NTRS1993

The distribution of flare parameters and implications for coronal heating

Assuming that solar hard X-ray flares are caused by bremsstrahlung from a distribution of accelerated electrons impinging on a thick target, we determine the relationship between the total flare energy released in the corona and observable flare parameters. It is shown that for the more numerous smaller flares to be energetically more important than larger ones, there must be an anticorrelation between observed flux and one or more of the photon spectral index, the total flare duration, the ratio of the total energy that goes into heating the corona to the energy that goes into acceleration of electrons, and the reciprocal of the low-energy cutoff of the accelerated electron spectrum. Using a new statistical test which properly takes account of data truncation due to observational selection effects, we find that neither spectral index nor duration show an anticorrelation with flux in ISEE 3/ICE hard X-ray data. Using a nonparametric method, we obtain single distributions of peak flux, spectral index, duration, and fluence, corrected for selection biases. The functional forms of these distributions do not support coronal heating by numerous small flares without very specific behavior by yet unobserved parameters.

Lee, Theodore T.↗
NASA NTRS1993

Viscous hypersonic shock-shock interaction on a blunt body at high altitude

The shock interaction produced when an incident oblique shock impinges on a blunt body, such as an engine inlet cowl lip of a hypersonic vehicle, is investigated for high altitude flight conditions. A perfect gas, Navier-Stokes numerical simulation of this problem at various altitudes representing continuum through transitional conditions is performed using the modified flux vector splitting method of Steger and Warming (1979). Two series of solutions are produced. First, a number-of-shock-positions are studied at a particular altitude and Mach number. Second, given a fixed shock position and Mach number, the interaction is investigated at several altitudes ranging from continuum to transitional flow conditions. It is shown that the interaction becomes fundamentally different as the density is lowered, and its effect on the overheating problem is progressively diminished. The maximum stagnation point heating at the highest altitude is reached only when the incident shock misses the cowl lip completely, and any interaction with the cowl bow shock that does occur takes place downstream and thus has little effect on the conditions at the stagnation point.

Comeaux, Keith A.↗