Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Forming”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,639 records · Page 91

Corrosion resistance of alumina-forming alloys against molten chlorides for energy production. I: Pre-oxidation treatment and isothermal corrosion tests

Advanced components in next-generation concentrating solar power (CSP) applications will require advanced heat-transfer fluids and thermal-storage materials that work from about 550 °C to at least 720 °C, for integration with advanced power-conversion systems. To reach the cost target, less-expensive salts such as molten chlorides have been identified as high-temperature fluid candidates. High-strength alloys need to be identified and their mechanical and chemical degradation must be minimized to be used in CSP applications. Approaches for corrosion mitigation need to be investigated and optimized to drive down corrosion rates to acceptable levels—in the order of tens of micrometers per year—for achieving a long system lifetime of at least 30 years. Surface passivation is a good corrosion mitigation approach because the alloy could then be exposed to both the liquid and the vapor phases of the salt mixture. In this investigation, we pre-oxidized the alumina-forming alloys Inconel 702, Haynes 224, and Kanthal APMT at different temperatures, dwelling times, and atmospheres to produce the passivation by forming protective oxides at the surface. The pretreated alloys were later corroded in molten MgCl2 – 64.41 wt% KCl at 700 °C in a flowing Ar atmosphere. We performed electrochemical techniques such as open-circuit potential followed by a potentiodynamic polarization sweep and conventional long-term weight-change tests to down-select the best-performing alloy and pre-oxidation conditions. The best corrosion results were obtained for In702 pre-oxidized in zero air at 1050 °C for 4 h. Finally, metallographic characterization of the pre-oxidized alloys and of the corroded surfaces showed that the formation of dense and uniform alumina scale during the pre-oxidation appears to protect the alloy from attack by molten chloride.

14 SOLAR ENERGY↗

Corrosion resistance of alumina forming alloys against molten chlorides for energy production. II: Electrochemical impedance spectroscopy under thermal cycling conditions

Next-generation power systems require higher temperatures to increase the efficiency of electricity production in the power block. Concentrating solar power (CSP) technology is looking for high temperature thermal fluids able to work in the range of 550–750 °C. Molten chlorides containing NaCl, KCl, MgCl 2 , and/or ZnCl 2 are being considered for solar receivers and/or sensible- or latent- thermal energy storage systems. Vapor pressures of chlorides are high enough that in combination with oxygen gaseous compounds will produce a harsh atmosphere that is generally very aggressive to common chromia forming alloys. Corrosion mitigations must consider a solution in which both zones (immersed in fluid and exposed to vapor phase) will be protected. This could easily be obtained using alloy surface modification approaches. Surface passivation, produced after pre-oxidation treatments, of alumina forming alloys (Inconel 702, Haynes 224 and Kanthal APMT) was evaluated in molten 35.59 wt% MgCl2 – 64.41 wt% KCl thermally cycled from 550 °C to 700 °C in flowing Ar and static zero air (ZA) atmospheres. Electrochemical impedance spectroscopy tests and metallographic characterization showed that the best performing alloy was pre-oxidized In702 in ZA at 1050 °C for 4 h due to the formation of protective, dense and continuous alumina layers. The alumina layers were unstable when flowing Ar was used as the inert atmosphere during corrosion evaluations. Corrosion results in static ZA are promising for next-generation CSP applications using molten chlorides because alumina scales were stable after 185 h of immersion in the oxygen-containing atmosphere. Alumina layers in pre-oxidized Al-FA In702 grew from 5 µm (before immersion) to 13 µm (after 185 h of immersion). As a result, the use of these alloys could be commercial feasibility and cost-effective because of the possibility of using oxygen-containing atmospheres instead of keeping enclosed systems with inert atmospheres to protect alloys from corrosion in molten chlorides.

14 SOLAR ENERGY↗

Electromagnetic Transition Form Factors of Nucleon Resonances

Recent measurements of nucleon resonance transition form factors with CLAS at Jefferson Lab are discussed. The new data resolve a long-standing puzzle of the nature of the Roper resonance, and confirm the assertion of the symmetric constituent quark model of the Roper as the first radial excitation of the nucleon. The data on $n\pi^+$ production at high $Q^2$ confirm the slow fall off of the $S_{11}(1535)$ transition form factor with $Q^2$, and better constrain the branching ratios $\beta_{N\pi}=0.50$ and $\beta_{N\eta}=0.45$. Also, new results on the transition amplitudes for the $D_{13}(1520)$ resonance are presented showing a rapid change from helicity 3/2 dominance seen at the real photon point to helicty 1/2 dominance at higher $Q^2$.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Nucleon Form Factors experiments with 12 GeV CEBAF

A number of precision form factor experiments at high momentum transfer will be performed with the 11 GeV electron beam of CEBAF. We review the approved proposals and the conceptual schemes of several new suggestions. Form factor data will serve as a major input for the construction of a tomographic image of the nucleon.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measurements of the Electric Form Factor of the Neutron at High Momentum Transfer

The electric and magnetic form factors of the nucleon provide experimental access to the underlying charge and magnetic moment distributions of quarks. We have measured the electric form factor of the neutron at four kinematic points between 1.2 and 3.5 GeV{sup 2} in Hall A at Jefferson Lab. This more than doubles the momentum transfer region for which this quantity has previously been measured, providing new information on the structure of the neutron. Preliminary results for G{sup n}{sub E} at Q{sup 2} = 1.7, 2.5, and 3.5 GeV{sup 2} were presented and were compared with QCD-based models and phenomenological approaches.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Charm Form Factors at Cleo-c

Many precision tests of the Standard Model require input from Lattice QCD or other QCD techniques. Of particular importance are the semileptonic form factors used to extract V{sub ub} in semileptonic B decays. Similarities between the D and B sector make charm semileptonic decays an excellent testing ground for the increasingly precise predictions of Lattice QCD. CLEO-c has recently used its entire data sample to produce a set of measurements involving the decays D{sup 0}{yields}{pi}{sup -}e{sup +}{nu}{sub e}, D{sup 0}{yields}K{sup -}e{sup +}{nu}{sub e}, D{sup +}{pi}{sup 0}e{sup +}{nu}{sub e}, and D{sup +}K-bar{sup 0}e{sup +}{nu}{sub e}. These results, which include the world's most precise measurements of D{yields}{pi} form factors, are in agreement with currently available theoretical results and are significantly more precise.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Experimental Status of Strange Form Factors

A brief review of the status of experiments measuring the weak form factors of the nucleon is given. The general conclusion is that the contributions to the form factors from strange quarks is small.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Calculation of electromagnetic force in electromagnetic forming process of metal sheet

Electromagnetic forming (EMF) is a forming process that relies on the inductive electromagnetic force to deform metallic workpiece at high speed. Calculation of the electromagnetic force is essential to understand the EMF process. However, accurate calculation requires complex numerical solution, in which the coupling between the electromagnetic process and the deformation of workpiece needs be considered. In this paper, an appropriate formula has been developed to calculate the electromagnetic force in metal work-piece in the sheet EMF process. The effects of the geometric size of coil, the material properties, and the parameters of discharge circuit on electromagnetic force are taken into consideration. Through the formula, the electromagnetic force at different time and in different positions of the workpiece can be predicted. The calculated electromagnetic force and magnetic field are in good agreement with the numerical and experimental results. The accurate prediction of the electromagnetic force provides an insight into the physical process of the EMF and a powerful tool to design optimum EMF systems.

30 DIRECT ENERGY CONVERSION↗

Axial Form Factor of the Nucleon in a Finite Spherical Cavity

Within a chiral quark model, we examine the corrections to the axial form factor of the nucleon when it is embedded in a finite volume, in this case a spherical cavity. It is found that the contribution to the form factor from the pion cloud persists to quite large volumes. For sizes comparable to current lattice simulations of QCD, the axial radius tends to be considerably smaller than that given in the infinite volume limit of the model.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measurement of the Proton Elastic Form Factor Ratio at Low Q{sup 2}

A new measurement of the proton elastic form factor ratio {mu}{sub p}G{sub E}/G{sub M} in the range of Q{sup 2} = 0.3-0.7 (GeV/c){sup 2} was made at Jefferson lab (JLab) Hall A using recoil polarimetry. With unprecedented ({approx}1%) precision, the new data show that the proton form factor ratio strongly deviates from unity in this low momentum transfer region, indicating a significant difference between the proton charge and magnetic distribution at large length scale. The new result is a few percent lower than previous world polarization data. The updated global fit indicates a 2% decrease in G{sub E} and 1% increase in G{sub M} in this low Q{sup 2} region.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Pion-photon transition form factor in light-cone sum rules

We extract constraints on the pion distribution amplitude from available data on the pionphoton transition form factor in the framework of light-cone sum rules. A pronounced discrepancy (2.7 - 3){sigma} between the Gegenbauer expansion coefficients extracted from the CELLO, CLEO, and Belle experimental data relative to those from BaBar is found. Predictions for the pion-photon transition form factor are presented by employing a pion distribution amplitude obtained long ago from QCD sum rules with nonlocal condensates. These predictions comply with the Belle data but disagree with those of BaBar beyond 9 GeV{sup 2}.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Charm and bottom hadronic form factors with QCD sum rules

We present a brief review of some calculations of form factors and coupling constants in vertices with charm and bottom mesons in the framework of QCD sum rules. We first discuss the motivation for this work, describing possible applications of these form factors to charm and bottom decays processes. We first make a summarize of the QCD sum rules method. We give special attention to the uncertainties of the method introducing by the intrinsic variation of the parameters. Finally we conclude.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Spontaneous electromagnetic fluctuations in unmagnetized plasmas. II. Relativistic form factors of aperiodic thermal modes

General expressions for the electromagnetic fluctuation spectra in unmagnetized plasmas are derived using fully relativistic dispersion functions and form factors for the important class of isotropic plasma particle distribution functions including in particular relativistic Maxwellian distributions. In order to obtain fluctuation spectra valid in the entire complex frequency plane, the proper analytical continuations of the unmagnetized form factors and dispersion functions are presented. The results are illustrated for the important special case of isotropic Maxwellian particle distribution functions providing in particular the thermal fluctuations of aperiodic modes. No restriction to the plasma temperature value is made, and the electromagnetic fluctuation spectra of ultrarelativistic thermal plasmas are calculated. The fully relativistic calculations also provide more general results in the limit of nonrelativistic plasma temperatures being valid in the entire complex frequency plane. They complement our earlier results in paper I and III of this series for negative values of the imaginary part of the frequency. A new collective, transverse, damped aperiodic mode with the damping rate γ∝−k{sup −5/3} is discovered in an isotropic thermal electron-proton plasma with nonrelativistic temperatures.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Spontaneous electromagnetic fluctuations in unmagnetized plasmas. IV. Relativistic form factors of aperiodic Lorentzian modes

Closed analytical expressions for the electromagnetic fluctuation spectra in unmagnetized plasmas are derived using fully relativistic dispersion functions and form factors for the important class of isotropic form-invariant Lorentzian plasma particle distribution functions. Such distribution functions occur frequently in cosmic plasmas due to the presence of suprathermal charged particles and energetic cosmic ray particles. The results are illustrated for the important special case of aperiodic fluctuations. The collective, transverse, damped aperiodic mode, discovered before in nonrelativistic Maxwellian particle distributions, also exists in Lorentzian electron-proton particle distributions, now with the damping rate γ∝−k{sup 3} for all wavenumber values, resulting from the presence of relativistic particles in the tail of the Lorentzian distribution. For longitudinal electric field, fluctuations no damped or growing aperiodic collective mode exists in Lorentzian plasmas. The existence of a damped, collective, transverse, aperiodic mode is not in conflict with earlier general instability studies excluding the existence of growing aperiodic collective modes in isotropic plasmas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

An 8-GW long-pulse generator based on Tesla transformer and pulse forming network

A long-pulse generator TPG700L based on a Tesla transformer and a series pulse forming network (PFN) is constructed to generate intense electron beams for the purpose of high power microwave (HPM) generation. The TPG700L mainly consists of a 12-stage PFN, a built-in Tesla transformer in a pulse forming line, a three-electrode gas switch, a transmission line with a trigger, and a load. The Tesla transformer and the compact PFN are the key technologies for the development of the TPG700L. This generator can output electrical pulses with a width as long as 200 ns at a level of 8 GW and a repetition rate of 50 Hz. When used to drive a relative backward wave oscillator for HPM generation, the electrical pulse width is about 100 ns on a voltage level of 520 kV. Factors affecting the pulse waveform of the TPG700L are also discussed. At present, the TPG700L performs well for long-pulse HPM generation in our laboratory.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Modeling mechanical behavior of an additively manufactured metal structure with local texture variations: a study on model form error

Here, the repetitive rapid solidification that occurs in metal additive manufacturing (AM) processes creates microstructures distinctly different from wrought materials. Local variability in AM microstructures (either by design or unintentional) raises questions as to how AM structures should be modeled at the part-scale to minimize modeling error. The key goal of this work is to demonstrate a posteriori error estimation applied to an AM part. It is assumed that the actual microstructure is unknown and an approximate, spatially uniform material model is used. Error bounds are calculated for many reference models based on AM microstructures with elongated grain morphology and localized or global fiber textures during a post-processing step. The current findings promote confidence that a posteriori model form error estimation could be used effectively in mechanical performance simulations of AM parts to quickly obtain quantitative error metrics between an approximate model result and many microstructure-based reference models. The a posteriori error estimation introduces significant time savings compared to computing the full reference model solutions. Tight bounds on model form error are obtained when texture variations in the reference models occur on large length scales. For materials with property variation at small length scales, multi-scale error estimation techniques are needed to properly account for the many interfaces present between areas with different properties.

36 MATERIALS SCIENCE↗

Baryon Transition Form Factors at JLab: Status and Outlook

The measurements of exclusive single-meson and double-pion electro-production cross sections off the proton to study nucleon resonances will be extended to higher momentum transfers with the CLAS12 detector and the energy upgraded CEBAF beam. Based on new theoretical developments to extract and interpret the electromagnetic transition form factors and on the experience gained from the most recent results, the newly formed collaboration of experimentalists and theorists shall enable us to provide unprecedented high-precision data, high-quality analyses, and state-of-the-art model and QCD based calculations in a Q domain up to 10 GeV{sup 2}. For the first time nucleon resonance structures will be studied at still unexplored distance scales, where the dressed quark contributions are the dominating degrees of freedom and their strong interaction is responsible for the ground and excited nucleon state formation. These studies also open up a promising opportunity to understand the origin of more than 98% of the nucleon mass that is created by strong fields predominantly at these distance scales by dressing the current quarks.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗