Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “FORCED VIBRATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,639 records · Page 91

Communication: Spectroscopic consequences of proton delocalization in OCHCO{sup +}

Even though quartic force fields (QFFs) and highly accurate coupled cluster computations describe the OCHCO{sup +} cation at equilibrium as a complex between carbon monoxide and the formyl cation, two notable and typical interstellar and atmospheric molecules, the prediction from the present study is that the equilibrium C{sub ∞v} structure is less relevant to observables than the saddle-point D{sub ∞h} structure. This is the conclusion from diffusion Monte Carlo and vibrational self-consistent field/virtual state configuration interaction calculations utilizing a semi-global potential energy surface. These calculations demonstrate that the proton “rattle” motion (ν{sub 6}) has centrosymmetric delocalization of the proton over the D{sub ∞h} barrier lying only 393.6 cm{sup −1} above the double-well OCHCO{sup +} C{sub ∞v} minima. As a result, this molecule will likely appear D{sub ∞h}, and the rotational spectrum will be significantly dimmer than the computed equilibrium 2.975 D center-of-mass dipole moment indicates. However, the proton transfer fundamental, determined to be at roughly 300 cm{sup −1}, has a very strong intensity. This prediction as well as those of other fundamentals should provide useful guides for laboratory detection of this cation. Finally, it is shown that the two highest energy QFF-determined modes are actually in good agreement with their vibrational configuration interaction counterparts. These high-level quantum chemical methods provide novel insights into this fascinating and potentially common interstellar molecule.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Self-, N2- and Ar-broadening and line mixing in HCN and C2H2

Self-, N2- and Ar-broadening coefficients were measured for the stretch-bend infrared combination bands nu-1 + nu-1/2 (4004/cm) of HCN and nu-1 + nu-1/5 (4091/cm) of C2H2, using a tunable difference-frequency laser. At atmospheric pressures, the Q branches of these bands exhibit significant rotational narrowing or line mixing. The broadening coefficients are fit with empirical rotationally inelastic collision rate laws, which are then used to model the line mixing in the overlapped Q-branch profiles. Simple energy gap fitting laws appear to be suitable for the shorter-range intermolecular quadrupole-quadrupole and induction forces, whereas an energy-corrected-sudden scaling law works better for the longer-range dipole-dipole and dipole-quadrupole collision partners. In all cases, the line-coupling coefficients are substantially reduced from the rotationally inelastic rates fit to the broadening coefficients, indicating that 35-70 percent of the broadening may be due to other collisional mechanisms such as cross-relaxation to the degenerate H state vibrational level.

Pine, A. S.↗

Flight Investigation of Control-stick Vibration of the YG-1B Autogiro

As a preliminary step in an investigation of control-stick vibration in direct-control autogiros, the periodic variations in the moments transmitted through the control system of a YG-1B autogiro were recorded in flight. The results of the measurements are presented in the form of coefficients of Fourier series expressing the varying part of the lateral and the longitudinal moments acting between rotor and fuselage at the control trunnions. The most important component of the variation in stick force was found to have frequency of three times the rotor speed and an amplitude that rose from negligible values at tip-speed ratio below 0.20 to +/-5.2 pounds longitudinally and +/-3.2 pounds laterally at tip-speed ratios of 0.35. Variations in stick force at all other frequencies were small in comparison with those at three times the rotor speed.

Bailey, F J , Jr↗

Small Engine Technology (Set) Task 8 Aeroelastic Prediction Methods

AlliedSignal Engines, in cooperation with NASA LeRC, completed an evaluation of recently developed aeroelastic computer codes using test cases from the AlliedSignal Engines fan blisk database. Test data for this task includes strain gage, light probe, performance, and steady-state pressure information obtained for conditions where synchronous or flutter vibratory conditions were found to occur. Aeroelastic codes evaluated include the quasi 3-D UNSFLO (developed at MIT and modified to include blade motion by AlliedSignal), the 2-D FREPS (developed by NASA LeRC), and the 3-D TURBO-AE (under development at NASA LeRC). Six test cases each where flutter and synchronous vibrations were found to occur were used for evaluation of UNSFLO and FREPS. In addition, one of the flutter cases was evaluated using TURBO-AE. The UNSFLO flutter evaluations were completed for 75 percent radial span and provided good agreement with the experimental test data. Synchronous evaluations were completed for UNSFLO but further enhancement needs to be added to the code before the unsteady pressures can be used to predict forced response vibratory stresses. The FREPS evaluations were hindered as the steady flow solver (SFLOW) was unable to converge to a solution for the transonic flow conditions in the fan blisk. This situation resulted in all FREPS test cases being attempted but no results were obtained during the present program. Currently, AlliedSignal is evaluating integrating FREPS with our existing steady flow solvers to bypass the SFLOW difficulties. ne TURBO-AE steady flow solution provided an excellent match with the AlliedSignal Engines calibrated DAWES 3-D viscous solver. Finally, the TURBO-AE unsteady analyses also matched experimental observations by predicting flutter for the single test case evaluated.

Eick, Chris D.↗

Isotope- and Thickness-Dependent Friction of Water Layers Intercalated Between Graphene and Mica

The lubricating properties of water have been discussed extensively for millennia. Water films can exhibit wearless high friction in the form of cold ice, or act as lubricants in skating and skiing when a liquid. At the fundamental level, friction is the result of a balance between the rate of energy generation by phonon excitation during sliding and drainage of the energy from the interface by coupling with bulk atoms. Using atomic force microscopy, we found that when H 2 O intercalates between graphene and mica, it increases the friction between the tip and the substrate, dependent on the thickness of the water and graphene layers, while the magnitude of the increase in friction was reduced by D 2 O intercalation. With the help of first-principles density functional theory calculations, we explain this unexpected behavior by the increased spectral range of the vibration modes of graphene caused by water, and by better overlap of the graphene vibration modes with mica phonons, which favors more efficient energy dissipation. Finally, the larger increase in friction with H 2 O versus D 2 O shows that the high-frequency vibration modes of the water molecules play a very important role in the transfer of the vibrational energy of the graphene to the phonon bath of the substrate.

36 MATERIALS SCIENCE↗

Developing tools and process controls to manufacture energy-efficient powders for additive manufacturing feedstocks

Traditionally, metal powders have been produced through methods such as grinding, atomization, and electrolysis. In contrast to these techniques, Metal Powder Works, Inc. has pioneered a methodology based on metal cutting. This innovative approach utilizes a vibrating cutting tool to machine metal particles, in the form of chips, from a workpiece. This technique allows for control of powder particle size, morphology, and avoids any thermally induced material changes. This collaboration aims to elucidate metal cutting characteristics and assess performance on tough materials like Inconel alloys. Computational models, using FEA and SPH techniques, will be developed initially, focusing on aluminum alloy (Al 7075- T6) for studying mesh sensitivity, cutting forces, and chip morphology.

36 MATERIALS SCIENCE↗

Active vibration control in microgravity environment

An active control process to reduce vibration transmitted from the Space Station structure to the vibration sensitive payload is evaluated. A low-friction air-bearing table is used to approximate zero gravity in the horizontal plane. An analog control system is described which activates calibrated air jets when displacement of the test mass is sensed. The air jet control system is found to introduce an effective damping factor in controlling the oscillatory response. The air-jet control system is designed such that the thrust force produces less than 10 to the -5th g acceleration of the payload. An analytical model has verified the amount of damping in addition to flow parameters such as the pressure drop across the valve and the air flow rate.

Gerhold, C. H.↗

Energy of Phonons and Zero-Point Vibrations in Compressed Rare-Gas Crystals

A dynamic matrix of rare-gas crystals is constructed within the model of deformable and polarizable atoms based on the nonempirical short-range repulsion potential taking into account the three-body interaction and deformation of electron shells of dipole-type atoms within the pair and three-body approximations. Ab initio calculations of the phonon energy for compressed rare-gas crystals are performed at two and ten mean-value points of the Chadi–Kohen method in a wide pressure range. It is shown that the contribution of three-body forces to the phonon frequencies due to overlap of electron shells of neighboring atoms is small as compared to the pair interaction even at a high pressure and most pronounced for Xe. The contributions of the deformation of electron shells within the pair and three-body approximations differ for different mean-value points and increase with an increase in pressure. The zero-point energies calculated by the Chadi–Kohen method for crystals of the Ne–Xe series are compared with the known experimental data at p = 0 and calculation results obtained by other researchers.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Thermodynamics of concentrated solid solution alloys

This study reviews the three main approaches for predicting the formation of concentrated solid solution alloys (CSSA) and for modeling their thermodynamic properties, in particular, utilizing the methodologies of empirical thermo-physical parameters, CALPHAD method, and first-principles calculations combined with hybrid Monte Carlo/Molecular Dynamics (MC/MD) simulations. In order to speed up CSSA development, a variety of empirical parameters based on Hume-Rothery rules have been developed. Herein, these parameters have been systematically and critically evaluated for their efficiency in predicting solid solution formation. The phase stability of representative CSSA systems is then illustrated from the perspectives of phase diagrams and nucleation driving force plots of the σ phase using CALPHAD method. The temperature-dependent total entropies of the FCC, BCC, HCP, and σ phases in equimolar compositions of various systems are presented next, followed by the thermodynamic properties of mixing of the BCC phase in Al-containing and Ti-containing refractory metal systems. First-principles calculations on model FCC, BCC and HCP CSSA reveal the presence of both positive and negative vibrational entropies of mixing, while the calculated electronic entropies of mixing are negligible. Temperature dependent configurational entropy is determined from the atomic structures obtained from MC/MD simulations. Current status and challenges in using these methodologies as they pertain to thermodynamic property analysis and CSSA design are discussed.

36 MATERIALS SCIENCE↗

Modeling the Electronic Absorption Spectra of the Indocarbocyanine Cy3

Accurate modeling of optical spectra requires careful treatment of the molecular structures and vibronic, environmental, and thermal contributions. The accuracy of the computational methods used to simulate absorption spectra is limited by their ability to account for all the factors that affect the spectral shapes and energetics. The ensemble-based approaches are widely used to model the absorption spectra of molecules in the condensed-phase, and their performance is system dependent. The Franck–Condon approach is suitable for simulating high resolution spectra of rigid systems, and its accuracy is limited mainly by the harmonic approximation. In this work, the absorption spectrum of the widely used cyanine Cy3 is simulated using the ensemble approach via classical and quantum sampling, as well as, the Franck–Condon approach. The factors limiting the ensemble approaches, including the sampling and force field effects, are tested, while the vertical and adiabatic harmonic approximations of the Franck–Condon approach are also systematically examined. Our results show that all the vertical methods, including the ensemble approach, are not suitable to model the absorption spectrum of Cy3, and recommend the adiabatic methods as suitable approaches for the modeling of spectra with strong vibronic contributions. We find that the thermal effects, the low frequency modes, and the simultaneous vibrational excitations have prominent contributions to the Cy3 spectrum. The inclusion of the solvent stabilizes the energetics significantly, while its negligible effect on the spectral shapes aligns well with the experimental observations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Senstitivty analysis and optimization of nodal point placement for vibration reduction

A method is developed for sensitivity analysis and optimization of nodal point locations in connection with vibration reduction. A straightforward derivation of the expression for the derivative of nodal locations is given, and the role of the derivative in assessing design trends is demonstrated. An optimization process is developed which uses added lumped masses on the structure as design variables to move the node to a preselected location - for example, where low response amplitude is required or to a point which makes the mode shape nearly orthogonal to the force distribution, thereby minimizing the generalized force. The optimization formulation leads to values for added masses that adjust a nodal location while minimizing the total amount of added mass required to do so. As an example, the node of the second mode of a cantilever box beam is relocated to coincide with the centroid of a prescribed force distribution, thereby reducing the generalized force substantially without adding excessive mass. A comparison with an optimization formulation that directly minimizes the generalized force indicates that nodal placement gives essentially a minimum generalized force when the node is appropriately placed.

Pritchard, J. I.↗

Sensitivity derivatives and optimization of nodal point locations for vibration reduction

A method is developed for sensitivity analysis and optimization of nodal point locations in connection with vibration reduction. A straightforward derivation of the expression for the derivative of nodal locations is given, and the role of the derivative in assessing design trends is demonstrated. An optimization process is developed which uses added lumped masses on the structure as design variables to move the node to a preselected location; for example, where low response amplitude is required or to a point which makes the mode shape nearly orthogonal to the force distribution, thereby minimizing the generalized force. The optimization formulation leads to values for added masses that adjust a nodal location while minimizing the total amount of added mass required to do so. As an example, the node of the second mode of a cantilever box beam is relocated to coincide with the centroid of a prescribed force distribution, thereby reducing the generalized force substantially without adding excessive mass. A comparison with an optimization formulation that directly minimizes the generalized force indicates that nodal placement gives essentially a minimum generalized force when the node is appropriately placed.

Pritchard, Jocelyn I.↗

Sensitivity analysis and optimization of nodal point placement for vibration reduction

A method is developed for sensitivity analysis and optimization of nodal point locations in connection with vibration reduction. A straightforward derivation of the expression for the derivative of nodal locations is given, and the role of the derivative in assessing design trends is demonstrated. An optimization process is developed which uses added lumped masses on the structure as design variables to move the node to a preselected location - for example, where low response amplitude is required or to a point which makes the mode shape nearly orthogonal to the force distribution, thereby minimizing the generalized force. The optimization formulation leads to values for added masses that adjust a nodal location while minimizing the total amount of added mass required to do so. As an example, the node of the second mode of a cantilever box beam is relocated to coincide with the centroid of a prescribed force distribution, thereby reducing the generalized force substantially without adding excessive mass. A comparison with an optimization formulation that directly minimizes the generalized force indicates that nodal placement gives essentially a minimum generalized force when the node is appropriately placed.

Pritchard, J. I.↗

Design Implications of Rotordynamics and Mass Balancing on a 1.4 MW Partially Superconducting Machine

To ensure that rotating machines operate without excessive bearing loads, vibration, and dynamic stresses, their design must consider rotordynamic response and provisions for mass balancing of rotors, even when their rotational speeds are modest. This paper presents a rotordynamics design study for a 1.4 MW, partially superconducting electric machine proposed for electrified aircraft propulsion – NASA’s High Efficiency Megawatt Motor (HEMM). The study includes the selection of mass balancing grade and mount and bearing stiffnesses to yield satisfactory critical speeds, deflection, and unbalance force, and predictions of the expected mass unbalance caused by the superconducting rotor coils. The impact of the machine’s number of rotor poles on expected mass unbalance is also quantified. Design decisions and lessons learned are discussed.

hybrid electric aircraft↗

Design Implications of Rotordynamics and Mass Balancing on a 1.4 MW Partially Superconducting Machine

To ensure that rotating machines operate without excessive bearing loads, vibration, and dynamic stresses, their design must consider rotordynamic response and provisions for mass balancing of rotors, even when their rotational speeds are modest. This paper presents a rotordynamics design study for a 1.4 MW, partially superconducting electric machine proposed for electrified aircraft propulsion – NASA’s High Efficiency Megawatt Motor (HEMM). The study includes the selection of mass balancing grade and mount and bearing stiffnesses to yield satisfactory critical speeds, deflection, and unbalance force, and predictions of the expected mass unbalance caused by the superconducting rotor coils. The impact of the machine’s number of rotor poles on expected mass unbalance is also quantified. Design decisions and lessons learned are discussed.

hybrid electric aircraft↗

Ab initio studies of the Rg–NO{sup +}(X{sup 1}Σ{sup +}) van der Waals complexes (Rg = He, Ne, Ar, Kr, and Xe)

We used the explicitly correlated variant of the coupled clusters method with single, double, and noniterative triple excitations [CCSD(T)-F12] to compute two-dimensional potential energy surfaces of van der Waals complexes formed by rare gas atoms (Rg) and NO{sup +}(X{sup 1}Σ{sup +}) cations. We used the correlation-consistent, triple-zeta (cc-pVTZ-F12) atomic basis sets, and for Kr and Xe rare gases, we employed corresponding pseudopotential cc-pVTZ-PP-F12 atomic basis sets. These basis sets were additionally augmented with mid-bond functions. The complexes are all of skewed T-shape type with Rg atom being closer to the N-side. Using analytical representation of the potentials, we have estimated zero-point energy corrected dissociation energies from anharmonic calculations with BOUND program and also from the harmonic approximation. The binding energies increase with the polarization of the Rg atom in series from He to Xe and are 196 cm{sup −1}, 360 cm{sup −1}, 1024 cm{sup −1}, 1434 cm{sup −1}, and 2141 cm{sup −1}, respectively. Their corresponding dissociation energies are 132 cm{sup −1}, 300 cm{sup −1}, 927 cm{sup −1}, 1320 cm{sup −1}, and 1994 cm{sup −1} for the complexes with He to Xe, respectively. We find good agreement with previous theoretical and experimental results. The harmonic vibrational frequencies were calculated for the bending and stretching modes of the Rg–NO{sup +} complexes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

From bulk to surface: Structure and dynamics of amorphous alumina from deep potential molecular dynamics

Understanding the atomic-scale structure and dynamics of amorphous oxide surfaces is essential for interpreting their chemical reactivity, mechanical stability, and interfacial behavior, yet direct experimental characterization remains challenging. We employ Deep Potential (DP) molecular dynamics to generate large-scale, ab initio -quality models of amorphous Al 2 O 3 bulk glasses and melt-quenched free surfaces, enabling a quantitative analysis of both structure and relaxation dynamics with statistical confidence inaccessible to direct ab initio simulation. The trained DP model reproduces experimental liquid and glass structure, captures the cooling-rate dependence of the bulk glass transition, and corrects systematic biases in the polyhedral populations predicted by widely used classical force fields. At the free surface, mass density recovers to bulk values over ~10 Å, while local coordination requires a slightly wider subsurface region to fully converge. The outermost layer is oxygen-enriched, exhibits altered polyhedral connectivity with contracted Al–O bonds, and hosts a broad population of under-coordinated motifs (notably AlO 3 and OAl 2 ) whose abundances are governed by glass stability. These under-coordinated surface motifs exhibit distinct vibrational signatures and occur as locally paired Lewis acid and Brønsted base sites consistent with bond-valence compensation, yet remain spatially dispersed rather than aggregating into extended clusters. Despite this pronounced structural heterogeneity, surface relaxation and the glass-transition temperature remain comparable to their bulk counterparts, suggesting that the disordered surface is kinetically stable once formed. Together, these results establish a molecular-level picture of amorphous alumina surfaces and demonstrate the capability of machine-learned potentials to resolve structure–property relationships in disordered oxide interfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Vibrational sum frequency generation spectroscopy reveals the inertness of chromium oxide (001) surfaces

Nanoengineered metal oxides such as Cr(III)-oxide (chromia) films have diverse potential applications in corrosion inhibition, remediation, energy generation, catalysis, data storage, and biological and environmental systems. Concerns about material degradation or oxidation to toxic chromate necessitate an understanding of chromia/aqueous interfaces, beginning with their hydroxylation and hydration behavior. Vibrational sum-frequency generation spectroscopy (vSFG) provides specific molecular-level information about water at the oxide/aqueous junction with high surface selectivity. To overcome the strong absorber problem typical of certain metal oxides in the UV–visible range during nonlinear optical studies, we employed molecular beam epitaxy to deposit transparent, epitaxial nanofilms of Cr 2 O 3 with (001) crystalline orientation on sapphire (Al 2 O 3 (001)) substrates, as confirmed by atomic force microscopy and X-ray diffraction. vSFG spectra of the air and water interfaces of the Cr 2 O 3 (001) films reveal hydroxyl features corresponding to both dissociated and molecular water on the surface. In contrast to the dangling hydroxyls found on the bare Al 2 O 3 (001) substrate, the hydroxyl groups on the deposited Cr 2 O 3 (001) nanofilm do not readily undergo isotopic H/D exchange when exposed to varying forms of D 2 O under ambient conditions. When considering the chemistries of the corresponding trivalent cations in aqueous solution, the finding is at variance with their similar acidities and proton exchange dynamics but consistent with markedly slower inner-sphere water ligand exchange of hexaquo Cr 3+ . This finding challenges the idea that proton and water exchange at the water/Cr₂O₃(001) interface are solely correlated, driven by the strength of metal-bridging oxygen bonds and surface hydroxyl distribution, without direct causation.

Boamah-Agyemang, Mavis D. [Pacific Northwest Natio↗