Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Computing, Lattice”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,639 records · Page 91

Excited-state spectrum, and the low-energy degrees of freedom of QCD

A major challenge in the study of the structure of hadrons is eliminating the systematic uncertainty due to the presence of excited states whilst avoiding the exponential degradation of the signal-to-noise ratio that arises as the source and sink hadrons are placed at increasing temporal separations. In this talk, I describe how the use of ?distillation? combined with a basis of non-local operators and the variational method facilitates the construction of an ?optimal? interpolating operator for the ground state, and hence the hadronic matrix elements to be computed at shorter separations. I apply the method to the calculation of the moments of the quark distribution amplitude in the pion, using isotropic clover lattices.

Richards, David↗

Delta wing flutter based on doublet lattice method in NASTRAN

The subsonic doublet-lattice method (DLM) aeroelastic analysis in NASTRAN was successfully applied to produce subsonic flutter boundary data in parameter space for a large delta wing configuration. Computed flow velocity and flutter frequency values as functions of air density ratio, flow Mach number, and reduced frequency are tabulated. The relevance and the meaning of the calculated results are discussed. Several input-deck problems encountered and overcome are cited with the hope that they may be helpful to NASTRAN Rigid Format 45 users.

Jew, H.↗

Low-aspect-ratio wings

Computer program predicts aerodynamic characteristics of wings having attached flow across part of wing and vortex flow across remainder. Program also uses quasi-vortex lattice method to formulate wing boundary conditions.

Lan, C. E.↗

Intra-Beam and Touschek Scattering Computations for Beam with Non-Gaussian Longitudinal Distributions

Both intra-beamscattering (IBS) and the Touschek effect become prominent formulti-bend-achromat- (MBA-) based ultra-low-emittance storage rings. To mitigate the transverse emittance degradation and obtain a reasonably long beam lifetime, a higher harmonic rf cavity (HHC) is often proposed to lengthen the bunch. The use of such a cavity results in a non-gaussian longitudinal distribution. However, common methods for computing IBS and Touschek scattering assume Gaussian distributions. Modifications have been made to several simulation codes that are part of the elegant [1] toolkit to allow these computations for arbitrary longitudinal distributions. After describing thesemodifications, we review the results of detailed simulations for the proposed hybrid seven-bend-achromat (H7BA) upgrade lattice [2] for the Advanced Photon Source.

Xiao, A.↗

Electron transport in graphene/graphene side-contact junction by plane-wave multiple-scattering method

Electron transport in graphene is along the sheet but junction devices are often made by stacking different sheets together in a “side-contact” geometry which causes the current to flow perpendicular to the sheets within the device. Such geometry presents a challenge to first-principles transport methods. We solve this problem by implementing a plane-wave-based multiple-scattering theory for electron transport. In this study, this implementation improves the computational efficiency over the existing plane-wave transport code, scales better for parallelization over large number of nodes, and does not require the current direction to be along a lattice axis. As a first application, we calculate the tunneling current through a side-contact graphene junction formed by two separate graphene sheets with the edges overlapping each other. We find that transport properties of this junction depend strongly on the AA or AB stacking within the overlapping region as well as the vacuum gap between two graphene sheets. Finally, such transport behaviors are explained in terms of carbon orbital orientation, hybridization, and delocalization as the geometry is varied.

36 MATERIALS SCIENCE↗

A physics-informed and hierarchically regularized data-driven model for predicting fluid flow through porous media

This paper presents a new deep learning data-driven model for predicting structure dependent pore-fluid velocity fields in rock. The model is based on a Convolutional Auto-Encoder (CAE) artificial neural network capable of learning from image data generated by direct numerical simulations of fluid flow through pore-structures, such as by Lattice Boltzmann or molecular dynamics methods. The main novelty of the model in comparison to previous CAE-based data-driven approaches consists of three parts. The first is a methodology for decomposing the full-domain of the porous media into sub-regions, or “sub-domains”, in order to reduce the overall size of the CAE, batch process the sub-domains in parallel, and enable the CAE to learn local and generalizable nonlinear mappings of pore-fluid velocities. The second consists of embedding the finite difference solutions of the incompressible Navier-Stokes and continuity equations into convolutional layers prior to the CAE in order to provide the CAE with knowledge of fluid dynamics physics (PhyFlow). The third main novelty is that the training of the CAE is regularized with a hierarchical loss function that encourages the learning of fluid flow patterns (in a way similar to ranked modes in principal component analysis), ranking from most to least important. This is shown to increase the stability in learning, reduce over-fitting, and promote interpretability of the CAE neural network layers (HierCAE). The comprehensive new data-driven model, which we call the PhyFlow-HierCAE model, is shown to exhibit improved accuracy and generalizability of flow field predictions over conventional CAE models, attributable to the embedded physical knowledge and the hierarchical regularization, as well as realize orders of magnitude speed-ups in computation times as a surrogate for the direct numerical simulations. Examples of training and forward predictions on unseen pore-structures are provided and evaluated for data from Lattice Boltzmann and molecular dynamics simulations of pore-fluid flow. The model is shown to be a fast and accurate emulator (or “surrogate”) for predicting effective permeability of unseen pore-structures based on learning from relatively small direct numerical simulation datasets.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Understanding dynamic properties of materials using neutron spectroscopy and atomistic simulation

Recent developments in first-principles lattice dynamics and classical force field based molecular dynamics are revolutionising the field of neutron spectroscopy. Herein we present a short review of these methods, their critical role in the supporting of cutting-edge experiments, and how they are improved by matching experimental data. We begin with a brief overview of how lattice dynamics calculations can be compared to inelastic neutron scattering (INS) and molecular dynamics simulations to both INS and quasi-elastic neutron scattering (QENS). We then provide a series of exemplar applications where lattice dynamics and molecular dynamics have been used in conjunction with neutron spectroscopy to bring significant understanding to topical areas of materials science namely: (i) lattice dynamics and INS for the study of hybrid organic-inorganic perovskites (ii) lattice dynamics and INS for the study of flexible porous solids and (iii) molecular dynamics and QENS for probing molecular behaviour in zeolite catalysis. In all three cases, the understanding gained through the synergy of experiment and computation would have been significantly reduced using either in isolation. Finally, we consider the current state of the art, describing outstanding challenges and suggesting future directions in this exciting and fertile area of physical science.

36 MATERIALS SCIENCE↗

Artificial Neural Network Modeling for 2-group Pin-Wise Group Constants

A High-fidelity multi-dimensional analysis is getting more attention because of the accurate prediction of local parameters for core design and safety assessment. For this, there are two possible approaches. One is a direct whole-core transport which is quite promising in terms of accuracy. However, it is very costly in terms of the computing time and memory requirements. Another option is the pin-by-pin core analysis using the diffusion theory. In the pin-by-pin core analysis, the multi-group constants can be produced by using the well-known generalized equivalence theory (GET) and these group constants can be corrected by the super homogenization method (SPH). Moreover, it is clear that both cross sections and discontinuity factors (DFs) must be corrected based on the leakage information in order to obtain an accurate solution for pin-by-pin core analysis. In a recent work by W. Kim and Y. Kim, the albedo-corrected parameterized equivalence constants (APEC) method was proposed, in which fuel assembly two-group XSs are parameterized as a function of an assembly-wise current-to-flux ratio (CFR). In the current work, we have investigated feasibility of APEC-like correction of two-group constants for homogenized pins in PWR cores, which is called APEC for Pin-cell or APECp. Unlike the APEC method, the artificial neural network (ANN) is used for functionalization of pin-wise XSs and DFs in this study. The pin-wise two-group parameters are evaluated using a 2- D method of characteristics (MOC)-based lattice code, DeCART2D.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Computer program documentation for a subcritical wing design code using higher order far-field drag minimization

A subsonic, linearized aerodynamic theory, wing design program for one or two planforms was developed which uses a vortex lattice near field model and a higher order panel method in the far field. The theoretical development of the wake model and its implementation in the vortex lattice design code are summarized and sample results are given. Detailed program usage instructions, sample input and output data, and a program listing are presented in the Appendixes. The far field wake model assumes a wake vortex sheet whose strength varies piecewise linearly in the spanwise direction. From this model analytical expressions for lift coefficient, induced drag coefficient, pitching moment coefficient, and bending moment coefficient were developed. From these relationships a direct optimization scheme is used to determine the optimum wake vorticity distribution for minimum induced drag, subject to constraints on lift, and pitching or bending moment. Integration spanwise yields the bound circulation, which is interpolated in the near field vortex lattice to obtain the design camber surface(s).

Kuhlman, J. M.↗

Ab initio calculations of the carbon and oxygen isotopes: Energies, correlations, and superfluid pairing

We perform ab initio nuclear lattice calculations of the neutron-rich carbon and oxygen isotopes using high-fidelity chiral interactions. We find good agreement with the observed binding energies and compute correlations associated with each two-nucleon interaction channel. For the isospin T = 1 channels, we show that the dependence on T z provides a measure of the correlations among the extra neutrons in the neutron-rich nuclei. For the spin-singlet S-wave channel, we observe that any paired neutron interacts with the nuclear core as well as its neutron pair partner, while any unpaired neutron interacts primarily with only the nuclear core. For the other partial waves, the correlations among the extra neutrons grow more slowly and smoothly with the number of neutrons. These general patterns are observed in both the carbon and oxygen isotopes and may be universal features that appear in many neutron-rich nuclei.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Classical Benchmarks for Variational Quantum Eigensolver Simulations of the Hubbard Model

Simulating the Hubbard model is of great interest to a wide range of applications within condensed matter physics, however its solution on classical computers remains challenging in dimensions larger than one. The relative simplicity of this model, embodied by the sparseness of the Hamiltonian matrix, allows for its efficient implementation on quantum computers, and for its approximate solution using variational algorithms such as the variational quantum eigensolver. While these algorithms have been shown to reproduce the qualitative features of the Hubbard model, their quantitative accuracy in terms of producing true ground state energies and other properties, and the dependence of this accuracy on the system size and interaction strength, the choice of variational ansatz, and the degree of spatial inhomogeneity in the model, remains unknown. Here we present a rigorous classical benchmarking study, demonstrating the potential impact of these factors on the accuracy of the variational solution of the Hubbard model on quantum hardware, for systems with up to 32 qubits. We find that even when using the most accurate wavefunction ansätze for the Hubbard model, the error in its ground state energy and wavefunction plateaus for larger lattices, while stronger electronic correlations magnify this issue. Concurrently, spatially inhomogeneous parameters and the presence of off-site Coulomb interactions only have a small effect on the accuracy of the computed ground state energies. Our study highlights the capabilities and limitations of current approaches for solving the Hubbard model on quantum hardware, and we discuss potential future avenues of research.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Ab initio approaches to high-entropy alloys: a comparison of CPA, SQS, and supercell methods

In this work, we present a comparative study of different modeling approaches to the electronic properties of the Hf 0.05 Nb 0.05 Ta 0.8 Ti 0.05 Zr 0.05 high-entropy alloy. Common to our modeling is the methodology to compute the one-particle Green’s function in the framework of density functional theory. We demonstrate that the special quasi-random structures modeling and the supercell, i.e., the locally self-consistent multiple-scattering methods, provide very similar results for the ground state properties such as the spectral function (density of states) and the equilibrium lattice parameter. To reconcile the multiple-scattering single-site coherent potential approximation with the real space supercell methods, we included the effect of screening of the net charges of the alloy components. Based on the analysis of the total energy and spectral functions computed within the density functional theory, we found no signature for the long-range or local magnetic moments formation in the Hf 0.05 Nb 0.05 Ta 0.8 Ti 0.05 Zr 0.05 high-entropy alloy; instead, we find possible superconductivity below ~9K.

36 MATERIALS SCIENCE↗

Optical spin-1 chain and its use as a quantum-computational wire

Measurement-based quantum computing, a powerful alternative to the standard circuit model, proceeds using only local adaptive measurements on a highly entangled resource state of many spins on a graph or lattice. Along with the canonical cluster state, the valence-bond solid ground state on a chain of spin-1 particles, studied by Affleck, Kennedy, Lieb, and Tasaki (AKLT), is such a resource state. We propose a simulation of this AKLT state using linear optics, wherein we can make use of the high-fidelity projective measurements that are commonplace in quantum-optical experiments, and describe how quantum logic gates can be performed on this chain. In our proposed implementation, the spin-1 particles comprising the AKLT state are encoded on polarization biphotons: three-level systems consisting of pairs of polarized photons in the same spatio-temporal mode. A logical qubit encoded on the photonic AKLT state can be initialized, read out, and have an arbitrary single-qubit unitary applied to it by performing projective measurements on the constituent biphotons. For MBQC, biphoton measurements are required which cannot be deterministically performed using only linear optics and photodetection.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Structural, electronic and optical properties of novel carbonate fluorides ABCO{sub 3}F (A=K, Rb, Cs; B=Ca, Sr)

In the present study, we performed first principles calculations on the electronic and optical properties of layered alkali–alkaline earth carbonate fluorides which attract attention in the domain of nonlinear optics. The calculated lattice parameters and volumes with and without inclusion of van der Waals (vdW) correction methods to standard density functional methods were compared with experiments. We observed that vdW interactions are predominant in RbCaCO{sub 3}F and CsCaCO{sub 3}F as compared with other computed compounds. The calculated bulk modulus from single crystal elastic constants reveals that these materials are all relatively harder than the KH{sub 2}PO{sub 4} (KDP) crystal. We also found that these materials are wide band gap insulators as obtained from Tran–Blaha modified Becke–Johnson potential. The linear optical properties such as dielectric function, refractive indices, birefringence and absorption spectra are presented. Finally, the calculated birefringence values indicate that these crystals could be promising for producing phase matching in the deep ultra-violet region. - Graphical abstract: The co- and anti-parallel alignment of CO{sub 3} groups leads to larger and smaller SHG coefficients in (a) KCaCO{sub 3}F, (b) KSrCO{sub 3}F, (c) RbSrCO{sub 3}F, (d) RbCaCO{sub 3}F, and (e) CsCaCO{sub 3}F. - Highlights: • Effect of van der Waals interactions on structural properties. • Single-crystalline elastic constants and mechanical stability. • Electronic properties. • Linear optical properties. • Comparison of present computed compounds with other well known materials in non-linear optical materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Helicity operators for mesons in flight on the lattice

Motivated by the desire to construct meson-meson operators of definite relative momentum in order to study resonances in lattice QCD, we present a set of single-meson interpolating fields at non-zero momentum that respect the reduced symmetry of a cubic lattice in a finite cubic volume. These operators follow from the subduction of operators of definite helicity into irreducible representations of the appropriate little groups. We show their effectiveness in explicit computations where we find that the spectrum of states interpolated by these operators is close to diagonal in helicity, admitting a description in terms of single-meson states of identified J PC . Lastly, the variationally determined optimal superpositions of the operators for each state give rapid relaxation in Euclidean time to that state, ideal for the construction of meson-meson operators and for the evaluation of matrix elements at finite momentum.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Airframe Noise Simulations of a Full-Scale Large Civil Transport in Landing Configuration

This paper summarizes the results obtained from an extensive computational campaign to accurately predict full-scale landing gear noise for large civil transports. A highly accurate digital model of a full-scale Boeing 777-300ER aircraft with as-flown nose and main landing gear components was developed for use in the simulations. Two aircraft configurations were selected: nose and main landing gear deployed with wing high-lift devices retracted, and nose and main landing gear deployed with wing high-lift devices deflected. The two configurations were simulated without and with toboggan fairings installed on the main gear to represent the principal configurations evaluated during the 2005 QTD2 flight test. All simulations were performed with the lattice Boltzmann solver PowerFLOW® to resolve and capture the highly complex, unsteady flow field in the immediate vicinity of the aircraft. The far-field noise sig-nature of the aircraft was computed via a Ffowcs-Williams and Hawkings integral approach, with flow quantities on a permeable surface enclosing the source regions used as input. Synthetic pressure records at ground array microphone locations used during the QDT2 test were employed to generate narrowband acoustic maps and integrated far-field noise spectra. With high-lift devices retracted, the predicted spectra showed that landing gear noise is equivalent to total airframe noise, with no other airframe sources appearing within 10 dB of gear peak levels. Application of a toboggan fairing to the main gear produced modest noise reductions of 1-2 dB across the resolved frequency range. With high-lift devices deflected, undercarriage noise was within 3-4 dB of the total airframe noise, thus comprising nearly half of the total airframe noise. For this configuration, the toboggan fairing did not produce a reduction in noise, corroborating trends previously observed in QTD2 flight test data.

airframe noise↗