Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Closure modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,639 records · Page 91

Improving the Physical Basis for Updraft Dynamics in Deep Convection Parameterizations

This article presents a new deep convective parameterization that determines cloud characteristics based on a specified cloud size distribution. The vertical profiles of cloud properties are determined by analytic equations, which formulate entrainment with an inverse relationship to cloud width. In line with recent studies of large eddy simulations (LES), cloud widths are assumed to be constant with height and vertical mass flux (M) characteristics of the clouds are therefore regulated by the vertical velocity profile. The parameterization is configured to work with existing cloud base M closure formulations, with the closure predicting the total cloud area rather than the cloud base M directly. Analytic formula are also used to connect the vertical wind shear magnitude to the cloud size distribution, wherein larger shear magnitudes result in more numerous large updrafts than weaker shear magnitudes, which is in line with recent research results. The parameterization is compared against 10 deep convective LES with varying thermodynamic and vertical wind shear profiles. Results show dramatic improvements in the prediction of normalized M, detrainment, and the properties of detrained air over the existing Zhang and McFarlane (1995) scheme. In particular, the new model is able to correctly portray the transition from a bottom-heavy M profile in weakly sheared environments, to a top-heavy M profile in strongly sheared environments.

54 ENVIRONMENTAL SCIENCES↗

Airframe noise measurements by acoustic imaging

Studies of the noise produced by flow past wind tunnel models are presented. The central objective of these is to find the specific locations within a flow which are noisy, and to identify the fluid dynamic processes responsible, with the expectation that noise reduction principles will be discovered. The models tested are mostly simple shapes which result in types of flow that are similar to those occurring on, for example, aircraft landing gear and wheel cavities. A model landing gear and a flap were also tested. Turbulence has been intentionally induced as appropriate in order to simulate full-scale effects more closely. The principal technique involves use of a highly directional microphone system which is scanned about the flow field to be analyzed. The data so acquired are presented as a pictorial image of the noise source distribution. An important finding is that the noise production is highly variable within a flow field and that sources can be attributed to various fluid dynamic features of the flow. Flow separation was not noisy, but separation closure usually was.

Kendall, J. M.↗

Simulation and analysis of a geopotential research mission

Methods for the determination of the initial conditions for the two satellites that will satisfy Geopotential Research Mission (GRM) requirements are investigated. For certain gravitational recovery techniques, the satellites must remain close to a specified separation distance and their groundtracks must repeat after a specified interval of time. Since the objective of the GRM mission is to improve the gravity model, any pre-mission orbit predicted using existing gravity models will be in error. A technique has been developed to eliminate the drift between the two satellites caused by gravitational modeling errors and return them to repeating groundtracks. The concept of frozen orbits, which minimize altitude variations over given latitudes, was investigated. Finally, the effects of temporal perturbations on the relative range-rate signal were studied. At the proposed altitude of 160 km, the range-rate signal produced by perturbations other than the static geopotential field are dominated by the luni-solar effect. This study demonstrates that the combined effects of all the temporal perturbations does not prevent the orbit from being frozen or the satellites from obtaining a repeating groundtrack to within a specified closure distance.

White, Lisa K.↗

A Generalized Multi-Phase Framework for Modeling Cavitation in Cryogenic Fluids

A generalized multi-phase formulation for cavitation in fluids operating at temperatures elevated relative to their critical temperatures is presented. The thermal effects and the accompanying property variations due to phase change are modeled rigorously. Thermal equilibrium is assumed and fluid thermodynamic properties are specified along the saturation line using the NIST-12 databank. Fundamental changes in the physical characteristics of the cavity when thermal effects become pronounced are identified; the cavity becomes more porous, the interface less distinct, and has increased entrainment when temperature variations are present. Quantitative estimates of temperature and pressure depressions in both liquid nitrogen and liquid hydrogen were computed and compared with experimental data of Hord for hydrofoils. Excellent estimates of the leading edge temperature and pressure depression were obtained while the comparisons in the cavity closure region were reasonable. Liquid nitrogen cavities were consistently found to be in thermal equilibrium while liquid hydrogen cavities exhibited small, but distinct, non-equilibrium effects.

Dorney, Dan↗

Local Food Crop Production can Fulfil Demand for Less than One-Third of the Population

The distance between the origin and end-point of food supply chains, and the ‘localness’ of food systems, are key considerations of many narratives associated with sustainability. Yet, information on the minimum distance to food crops is still scarce at the global level. Using an optimization model based on ‘foodsheds’ (that is, self-sufficient areas with internal dependencies), we calculate the potential minimum distance between food production and consumption for six crop types around the world. We show that only 11–28% of the global population can fulfil their demand for specific crops within a 100-km radius, with substantial variation between different regions and crops. For 26–64% of the population, that distance is greater than 1,000 km. Even if transnational foodsheds were in place, large parts of the globe would still depend on trade to feed themselves. Although yield gap closure and food loss reductions could favour more local food systems, particularly in Africa and Asia, global supply chains would still be needed to ensure an adequate and stable food supply.

Crop production↗

Panel Session 129: Perspectives (US and Non-US) on the Use of Risk and Dose Assessment Tools (R9.3)

This panel focused on various dose and risk assessment tools for assessments, Deactivation and Decommissioning, remediation, and closure of sites of chemical and radioactive wastes. Representatives from the US government agencies, non-US countries and their representative regulatory bodies or authorities, as well as performance/risk assessment practitioners compared and contrasted the various guidance from regulatory agencies and authorities on how tools such as the Preliminary Remediation Goals (PRG) calculator, the Dose Compliance Concentrations (DCC) calculator, and Residual Radioactivity (RESRAD) should be used in support of analyses and decisions for environmental cleanup activities. Panelists with presentations: Cumulative Impact Evaluation: Innovative Tools for Evaluation of Groundwater Protection (Alaa Aly); Superfund Evaluation Process for Alternative Risk and Dose Models (with Focus on EPA and DOE Tools) (Stuart Walker); NRC Staff Perspective on Risk-Informed Approach and Reasonable Safety Assurance in D and D and LLW (Rateb (Boby) Abu Eid)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Regulatory Decision-Making Process Using 'Weight of Evidence: An Evidence Integration Approach' by the State of Washington at the Hanford Site - 20163

Performance Assessment and Environmental Impact Statement Modeling, Human and Ecological Risk Assessments are the tools used by the Washington State Department of Ecology (Ecology) to make regulatory decisions for permitting and cleanup. These efforts all inherently have large amounts of uncertainty no matter how many alternative approaches are attempted. Professional feedback from tribal governments, stakeholders, federal and state regulators, the public and independent peer review groups are taken into account in this process of informed decision making. The process also includes full evaluation of the comments and the associated reviews made by the various peer review groups such as the Low -Level Waste Disposal Facility Federal Review Group (DOE order 435.1) and the Nuclear Regulatory Commission (NRC). The evolution of technology has produced quicker and more efficient fate and transport modeling tools with related quantification of uncertainties and their significance. Groundwater and vadose zone models have been expanded across the entire Hanford site. Many of the technical approaches identified in the Washington State Regulations are updated using current knowledge to better understand the complexities of the Hanford Site using the latest state of the art tools for risk assessment and modeling. More emphasis and time are directed on defining uncertainty and then managing the uncertainty. One added tool is to run sensitivity cases based on informed decision making. The weight of evidence approach considers all relevant information in an integrative assessment that takes into account the kinds of evidence available, the quality and quantity, the uncertainty and error associated with each type, and how they fit together. Evidence of integration involves looking at systematic reviews and evaluating their strengths and weaknesses. In conclusion, Ecology, Washington State's lead regulatory agency at the Hanford site, has had to modify its site closure approach compared to the rest of the state. A more holistic approach dealing with the Hanford site as an integrated system has evolved leading to a defensible informed approach for regulatory closure decisions. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Neutron-rich calcium isotopes within realistic Gamow shell model calculations with continuum coupling

Based on the realistic nuclear force of the high-precision CD-Bonn potential, we have performed comprehensive calculations for neutron-rich calcium isotopes using the Gamow shell model (GSM) which includes resonance and continuum. The realistic GSM calculations produce well binding energies, one- and two-neutron separation energies, predicting that 57 Ca is the heaviest bound odd isotope and 70 Ca is the dripline nucleus. Resonant states are predicted, which provides useful information for future experiments on particle emissions in neutron-rich calcium isotopes. Shell evolutions in the calcium chain around neutron numbers $\textit{N}$ = 32, 34, and 40 are understood by calculating effective single-particle energies, the excitation energies of the first 2 + states and two-neutron separation energies. The calculations support shell closures at 52 Ca ($\textit{N}$ = 32) and 54 Ca ($\textit{N}$ = 34) but show a weakening of shell closure at 60 Ca ($\textit{N}$ = 40). Finally, the possible shell closure at 70 Ca ($\textit{N}$ = 50) is predicted.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

2020 Annual Report of Available Drawdowns for Each Oil Storage Cavern in the Strategic Petroleum Reserve

The Department of Energy maintains an up-to-date documentation of the number of available full drawdowns of each of the caverns owned by the Strategic Petroleum Reserve (SPR). This information is important for assessing the SPR's ability to deliver oil to domestic oil companies expeditiously if national or world events dictate a rapid sale and deployment of the oil reserves. Sandia was directed to develop and implement a process to continuously assess and report the evolution of drawdown capacity, the subject of this report. A cavern has an available drawdown if after that drawdown, the long-term stability of the cavern, the cavern field, or the oil quality are not compromised. Thus, determining the number of available drawdowns requires the consideration of several factors regarding cavern and wellbore integrity and stability, including stress states caused by cavern geometry and operations, salt damage caused by dilatant and tensile stresses, the effect of enhanced creep on wellbore integrity, and the sympathetic stress effect of operations on neighboring caverns. A consensus has now been built regarding the assessment of drawdown capabilities and risks for the SPR caverns. The process involves an initial assessment of the pillar-to-diameter (P/D) ratio for each cavern with respect to neighboring caverns. A large pillar thickness between adjacent caverns should be strong enough to withstand the stresses induced by closure of the caverns due to salt creep. The first evaluation of P/D includes a calculation of the evolution of P/D after a number of full cavern drawdowns. The most common storage industry standard is to keep this value greater than 1.0, which should ensure a pillar thick enough to prevent loss of fluids to the surrounding rock mass. However, many of the SPR caverns currently have a P/D less than 1.0 or will likely have a low P/D after one or two full drawdowns. For these caverns, it is important to examine the structural integrity with more detail using geomechanical models. Finite-element geomechanical models have been used to determine the stress states in the pillars following successive drawdowns. By computing the tensile and dilatant stresses in the salt, areas of potential structural instability can be identified that may represent "red flags" for additional drawdowns. These analyses have found that many caverns will maintain structural integrity even when grown via drawdowns to dimensions resulting in a P/D of less than 1.0. The analyses have also confirmed that certain caverns should only be completely drawn down one time. As the SPR caverns are utilized and partial drawdowns are performed to remove oil from the caverns (e.g., for occasional oil sales authorized by the Congress or the President), the changes to the cavern caused by these procedures must be tracked and accounted for so that an ongoing assessment of the cavern's drawdown capacity may be continued. A proposed methodology for assessing and tracking the available drawdowns for each cavern was presented in Sobolik et al. (2018). This report includes an update to the baseline drawdowns for each cavern, and provides an initial assessment of the evolution of drawdown expenditure for several caverns

02 PETROLEUM↗

Available Drawdowns for Each Oil Storage Cavern in the Strategic Petroleum Reserve (2021 Annual Report)

The Department of Energy maintains an up-to-date documentation of the number of available full drawdowns of each of the caverns owned by the Strategic Petroleum Reserve (SPR). This information is important for assessing the SPRs ability to deliver oil to domestic oil companies expeditiously if national or world events dictate a rapid sale and deployment of the oil reserves. Sandia was directed to develop and implement a process to continuously assess and report the evolution of drawdown capacity, the subject of this report. A cavern has an available drawdown if after that drawdown, the long-term stability of the cavern, the cavern field, or the oil quality are not compromised. Thus, determining the number of available drawdowns requires the consideration of several factors regarding cavern and wellbore integrity and stability, including stress states caused by cavern geometry and operations, salt damage caused by dilatant and tensile stresses, the effect of enhanced creep on wellbore integrity, and the sympathetic stress effect of operations on neighboring caverns. A consensus has now been built regarding the assessment of drawdown capabilities and risks for the SPR caverns (Sobolik et al., 2014; Sobolik 2016). The process involves an initial assessment of the pillar - to - diameter (P/D) ratio for each cavern with respect to neighboring caverns. A large pillar thickness between adjacent caverns should be strong enough to withstand the stresses induced by closure of the caverns due to salt creep. The first evaluation of P/D includes a calculation of the evolution of P/D after a number of full cavern drawdowns. The most common storage industry standard is to keep this value greater than 1.0, which should ensure a pillar thick enough to prevent loss of fluids to the surrounding rock mass. However, many of the SPR caverns currently have a P/D less than 1.0 or will likely have a low P/D after one or two full drawdowns. For these caverns, it is important to examine the structural integrity with more detail using geomechanical models. Finite-element geomechanical models have been used to determine the stress states in the pillars following successive drawdowns. By computing the tensile and dilatant stresses in the salt, areas of potential structural instability can be identified that may represent red flags for additional drawdowns. These analyses have found that many caverns will maintain structural integrity even when grown via drawdowns to dimensions resulting in a P/D of less than 1.0. The analyses have also confirmed that certain caverns should only be completely drawn down one time. As the SPR caverns are utilized and partial drawdowns are performed to remove oil from the caverns (e.g., for occasional oil sales , purchases, or exchanges authorized by the Congress or the President), the changes to the cavern caused by these procedures must be tracked and accounted for so that an ongoing assessment of the caverns drawdown capacity may be continued. A proposed methodology for assessing and tracking the available drawdowns for each cavern was presented in Sobolik et al. (2018). This report is the latest in a series of annual reports, and it includes the baseline available drawdowns for each cavern, and the most recent assessment of the evolution of drawdown expenditure for several caverns .

02 PETROLEUM↗

Study of Shortwave Spectra in Fully 3D Environment: Synergy Between Scanning Radars and Spectral Radiation Measurements

The main theme for our research is the understanding and closure of the surface spectral shortwave radiation problem in fully 3D cloud situations by combining the new ARM scanning radars, shortwave spectrometers, and microwave radiometers with the arsenal of radiative transfer tools developed by our group. In particular, we define first a large number of cloudy test cases spanning all 3D possibilities not just the customary uniform-overcast ones. Second, for each case, we define a "Best Estimate of Clouds That Affect Shortwave Radiation" using all relevant ARM instruments, notably the new scanning radars, and contribute this to the ARM Archive. Third, we test the ASR-signature radiative transfer model RRTMG_SW for those cases, focusing on the near-IR because of long-standing problems in this spectral region, and work with the developers to improve RRTMG_SW in order to increase its penetration into the modeling community.

Wiscombe, Warren J.↗

Spectral Invariance Principles Observed in Spectral Radiation Measurements of the Transition Zone

The main theme for our research is the understanding and closure of the surface spectral shortwave radiation problem in fully 3D cloud situations by combining the new ARM scanning radars, shortwave spectrometers, and microwave radiometers with the arsenal of radiative transfer tools developed by our group. In particular, we define first a large number of cloudy test cases spanning all 3D possibilities not just the customary uniform-overcast ones. Second, for each case, we define a "Best Estimate of Clouds That Affect Shortwave Radiation" using all relevant ARM instruments, notably the new scanning radars, and contribute this to the ARM Archive. Third, we test the ASR-signature radiative transfer model RRTMG_SW for those cases, focusing on the near-IR because of long-standing problems in this spectral region, and work with the developers to improve RRTMG_SW in order to increase its penetration into the modeling community.

Marshak, Alexander↗

Communication Demand in the National Airspace - A Federated Learning Approach

Within the national airspace system (NAS), efficient use of spectrum remains a challenge; as UAS and UAM missions evolve, the amount of mission-critical aircraft communications are expected to significantly grow. To accommodate the increased demand, NASA Glenn Research Center is investigating artificial intelligence approaches that could dynamically allocate spectrum; however, these solutions are driven by communication and aviation data items, many of which are not directly available. One such cornerstone data item is communication demand, parameterizing the needs within a sector in terms that may directly inform spectrum allocation, such as channel access duration, bandwidth, and modulation type. This paper considers the complexity of predicting communication demand as a function of NAS behaviors. Unlike prior prediction work in communications, this research must consider how the NAS may be impacted by external factors - such as convective weather and closures - rather than estimating demand from time-series forecasting alone. Much of this research considers a federated learning design to predict communication events in terms of the type of event occurring (sector coordination, conflict resolution, etc.). To do so, an investigation of products from Sherlock Data Warehouse is conducted, identifying the trends, sufficiency, and correlations of each product to identified events. Additionally, a preliminary discussion for inferring associations between these event types and their communication parameters (duration, bandwidth, modulation) is presented. By utilizing federated learning, imbalances in the types of events and data present throughout the NAS can inform local models without impairing global training. Furthermore, the two-stage approach proposed allows for robust and speculative communication modelling, as communication techniques continue to evolve. As a result, this model enables a generalized approach to understanding NAS communications which is able to inform long-term changes to aviation spectrum management.

Nathan Schimpf↗

A Federated Learning Approach to Predicting Communication Demand in the National Airspace

Within the national airspace system (NAS), efficient use of spectrum remains a challenge; as UAS and UAM missions evolve, the amount of mission-critical aircraft communications are expected to significantly grow. To accommodate the increased demand, NASA Glenn Research Center is investigating artificial intelligence approaches that could dynamically allocate spectrum; however, these solutions are driven by communication and aviation data items, many of which are not directly available. One such cornerstone data item is communication demand, parameterizing the needs within a sector in terms that may directly inform spectrum allocation, such as channel access duration, bandwidth, and modulation type. This paper considers the complexity of predicting communication demand as a function of NAS behaviors. Unlike prior prediction work in communications, this research must consider how the NAS may be impacted by external factors - such as convective weather and closures - rather than estimating demand from time-series forecasting alone. Much of this research considers a federated learning design to predict communication events in terms of the type of event occurring (sector coordination, conflict resolution, etc). To do so, an investigation of products from Sherlock Data Warehouse is conducted, identifying the trends, sufficiency, and correlations of each product to identified events. Additionally, a preliminary discussion for inferring associations between these event types and their communication parameters (duration, bandwidth, modulation) is presented. By utilizing federated learning, imbalances in the types of events and data present throughout the NAS can inform local models without impairing global training. Furthermore, the two-stage approach proposed allows for robust and speculative communication modelling, as communication techniques continue to evolve. As a result, this model enables a generalized approach to understanding NAS communications which is able to inform long-term changes to aviation spectrum management.

Nathan Schimpf↗

Identifications of the polar cap boundary and the auroral belt in the high altitude magnetosphere: A model for field aligned currents

Using the OGO-5 fluxgate magnetometer data, the polar cap boundary is identified in the high altitude magnetosphere by a sudden transition from a dipolar field to a more tail like configuration. The basic pattern of the magnetic field variations observed during the satellite's traversal of the auroral belt is presented. This pattern shows the existence of a field aligned current layer on the equator side of the polar cap boundary. Currents flow in the opposite directions in the two field aligned current layers. The current directions in these layers as observed by OGO-5 in the high-altitude magnetosphere are the same as those observed at low altitudes by the polar orbiting TRIAD satellite. The magnetic field in the region where the lower latitude field aligned current layer is situated is essentially meridional. Thus the equatorial current closure of this current system must be via the equatorial current sheet. The two field aligned current systems, one at the polar cap boundary and the other on the low latitude side of the auroral belt, are coupled through the Pedersen current in the ionosphere.

Sugiura, M.↗

Available Drawdowns for Each Oil Storage Cavern in the Strategic Petroleum Reserve (2022 Annual Report)

The Department of Energy maintains an up-to-date documentation of the number of available full drawdowns of each of the caverns owned by the Strategic Petroleum Reserve (SPR). This information is important for assessing the SPR's ability to deliver oil to domestic oil companies expeditiously if national or world events dictate a rapid sale and deployment of the oil reserves. Sandia was directed to develop and implement a process to continuously assess and report the evolution of drawdown capacity, the subject of this report. A cavern has an available drawdown if after that drawdown, the long-term stability of the cavern, the cavern field, or the oil quality are not compromised. Thus, determining the number of a vailable drawdowns requires the consideration of several factors regarding cavern and wellbore integrity and stability, including stress states caused by cavern geometry and operations, salt damage caused by dilatant and tensile stresses, the effect of enhanced creep on wellbore integrity, and the sympathetic stress effect of operations on neighboring caverns. A consensus has now been built regarding the assessment of drawdown capabilities and risks for the SPR caverns (Sobolik et al., 2014; Sobolik 2016). The process involves an initial assessment of the pillar-to-diameter (P/D) ratio for each cavern with respect to neighboring caverns. A large pillar thickness between adjacent caverns should be strong enough to withstand the stresses induced by closure of the caverns due to salt creep. The first evaluation of P/D includes a calculation of the evolution of P/D after a number of full cavern drawdowns. The most common storage industry standard is to keep this value greater than 1.0, which should ensure a pillar thick enough to prevent loss of fluids to the surrounding rock mass. However, many of the SPR caverns currently have a P/D less than 1.0 or will likely have a low P/D after one or two full drawdowns. For these caverns, it is important to examine the s tructural integrity with more detail using geomechanical models. Finite - element geomechanical models have been used to determine the stress states in the pillars following successive drawdowns. By computing the tensile and dilatant stresses in the salt, areas of potential structural instability can be identified that may represent "red flags" for additional drawdowns. These analyses have found that many caverns will maintain structural integrity even when grown via drawdowns to dimensions resulting in a P/D of less than 1.0. The analyses have also confirmed that certain caverns should only be completely drawn down one time. As the SPR caverns are utilized and partial drawdowns are performed to remove oil from the caverns (e.g., for occasional oil sales , purchases, or exchanges authorized by the Congress or the President), the changes to the cavern caused by these procedures must be tracked and accounted for so that an ongoing assessment of the cavern's drawdown capacity may be continued. A proposed methodology for assessing and tracking the available drawdowns for each cavern was presented in Sobolik et al. (2018). This report is the latest in a series of annual reports, and it includes the baseline available drawdowns for each cavern, and the most recent assessment of the evolution of drawdown expenditure for several caverns.

02 PETROLEUM↗

Beneficial Use of Harvested Ponded Fly Ash and Landfilled FGD Materials for High-Volume Surface Mine Reclamation

The overall motivation of this project was to demonstrate at laboratory, bench-scale, and full-scale demonstration levels that (a) coal ash surface impoundments can go through closure by removal as per USEPA and state regulations so that the material can be used as is (other than draining free water using CCRs piles) in high-volume beneficial applications, (b) FGD material from closed out FGD facilities can be excavated and recompacted for coal mine reclamation, and (c) harvested CCRs can be beneficially utilized (providing a net environmental gain) in large-volumes for reclamation at abandoned coal mine sites across the US, especially in the Eastern and Midwest coal mining regions. The objectives of this project were to: 1) promote the safe and cost-effective closure by removal of coal ash impoundments, 2) harvest landfilled FGD, and 3) promote the high-volume beneficial use of these harvested CCRs in the reclamation of abandoned surface coal mine sites across the eastern and midwestern coal mining regions of the United States. The major tasks carried out for this project are summarized below: 1) Conesville Full-Scale Demonstration Project: About 2 million tons of harvested CCR materials from the closure by removal of an inactive fly ash pond and an adjacent old FGD landfill were used for the full-scale demonstration project to fully reclaim a nearby partially completed abandoned surface coal mine. Site monitoring for the project duration was carried out and results are discussed. 2) Laboratory Testing: Geotechnical and environmental testing of harvested ponded fly ash and landfilled FGD material at the former Conesville power plant were carried out. Completing the laboratory testing allowed for QA/QC for the full-scale site construction and informed the formulation of the risk analysis. 3) Risk Analysis: We developed a reliable computational model for fate and transport. We used these models and the rich set of monitored data for the Conesville site to analyze risks to human health and ecological risks associated with high-volume surface mine reclamation using harvested CCRs. 4) GIS Siting Study: A Geographic Information System (GIS) study was carried out for three states in the Eastern coal mining region and two states in the Midwest coal region. This effort provided site specific GIS information for five states and allowed us to establish protocols that other states can follow in implementing their own state specific GIS study.

01 COAL, LIGNITE, AND PEAT↗

Serum amyloid A1: Innocent bystander or active participant in cell migration in triple-negative breast cancer?

Highlights: • SAA1 knockdown reduced cell viability in triple-negative breast cancer cells. • SAA1 knockdown induced a S to G{sub 2}/M cell cycle shift in MDA-MB-231 cells. • SAA1 silencing inhibited cell migration in MDA-MB-231 and HCC70 cells. • SAA1 silencing altered epithelial-to-mesenchymal transition markers in MDA-MB-231 cells. The Serum Amyloid A (SAA) family of proteins is associated with various pathological conditions, including cancer. However, their role in cancer is incompletely understood. Here, we investigated the role of SAA1 in cell cycle regulation, apoptosis, survival signaling, metabolism, and metastasis in models of triple-negative breast cancer (TNBC), using RNAi. Our data show that in untransformed epithelial cells (MCF12A), the knockdown of SAA1 induces the expression of cell cycle regulators (MCM2, p53), the activation of DNA repair (PARP synthesis), and survival signaling (NFκB). In contrast, knockdown of SAA1 in the TNBC cell line (MDA-MB-231) induced the expression p16 and shifted cells in the cell cycle from the S to G{sub 2}/M phase, without the activation of DNA repair. Moreover, in SAA1-deficient MDA-MB-231 and HCC70 cells, metabolism (NADH oxidation) continually increased while cell migration (% wound closure and the rate of wound closure) decreased. However, silencing of SAA1 altered epithelial and mesenchymal markers in MCF12A (E-cadherin, Laminin 1β, Vimentin) and MDA-MB-231 (α-Smooth muscle actin) cells, associated with the metastatic program of epithelial-mesenchymal transition. Nonetheless, our data provide evidence that SAA1 could potentially serve as a therapeutic target in TNBC.

60 APPLIED LIFE SCIENCES↗