Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CONDUCTIVE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,639 records · Page 91

Thermal conductivity studies of CdZnTe with varying Te excess

Cadmium Zine Telluride (CZT) has been extensively studied as a room temperature semiconductor gamma radiation detector. CZT continues to show promise as a bulk and pixelated gamma spectrometer with less than one percent energy resolution; however the fabrication costs are high. Improved yields of high quality, large CZT spectroscopy grade crystals must be achieved. CZT is grown by the Traveling Heater Method (THM) with a Te overpressure to account for vaporization losses. This procedure creates Te rich zones. During growth, boules will often cleave limiting the number of harvestable crystals. As a result, crystal growth parameter optimization was evaluated by modeling the heat flow within the system. Interestingly, Cadmium Telluride (CdTe) is used as a thermal conductivity surrogate in the absence of a thorough study of the CZT thermal properties. The current study has measured the thermal conductivity of CZT pressed powders with varying Te concentrations from 50-100% over 25-800°C to understand the variation in this parameter from CdTe. Cd0.9Zn0.1Te1.0 is the base CZT (designated 50%). CZT exhibits a thermal conductivity of nearly 1 W/mK, an order of magnitude greater than CdTe. Lastly, the thermal conductivity decreased with increasing Te concentration.

36 MATERIALS SCIENCE↗

Relationship between the defect structure and fluorine-ion conductivity of La{sub 1−y}Sr{sub y}F{sub 3−y} (0 ⩽ y ⩽ 0.15) crystals according to X-ray and neutron diffraction data

The defect structure of crystals of as-grown nonstoichiometric tysonite (LaF{sub 3} type) La{sub 1−y}Sr{sub y}F{sub 3−y} phase (y = 0, 0.05, 0.07, and 0.15) has been investigated by X-ray diffraction and neutron diffraction. A concentration-driven structural transition from the β-La{sub 1−y}Sr{sub y}F{sub 3−y} modification to the α-La{sub 1−y}Sr{sub y}F{sub 3−}y modification in the range y = 0.05–0.10 has been observed for the first time. This transition correlates with the maximum of fluorine-ion conductivity (y = 0.05 ± 0.02) and the maximum in the melting curve (y = 0.07 ± 0.03). β-LaF{sub 3} and β-La{sub 0.95}Sr{sub 0.05}F{sub 2.95} crystals belong to the trigonal system (sp. gr. P3̄c1, Z = 6) and are twinned according to the merohedral twin law. Fine changes in the fluorine sublattice of β-La{sub 0.95}Sr{sub 0.05}F{sub 2.95} increase conductivity σ{sub 293K} to 3 × 10{sup −4} S/cm; hence, these crystals can be used as fluorine-conducting solid electrolytes (FCSEs) in solid-state ionics devices. Additional possibilities of ion transport over twin joints are discussed. In α-La{sub 0.85}Sr{sub 0.15}F{sub 2.85} crystal the symmetry group changes to P6{sub 3}/mmc, Z = 2; it is not twinned and its fluorine-ion conductivity is reduced.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Fluorine-ion conductivity of different technological forms of solid electrolytes R{sub 1–y}M{sub y}F{sub 3–y} (LaF{sub 3} Type ) (M = Ca, Sr, Ba; R Are Rare Earth Elements)

We have investigated the conductivity of some representatives of different technological forms of fluoride-conducting solid electrolytes R{sub 1–y}M{sub y}F{sub 3–y} (M = Ca, Sr, Ba; R are rare earth elements) with an LaF{sub 3} structure: single crystals, cold- and hot-pressing ceramics based on a charge prepared in different ways (mechanochemical synthesis, solid-phase synthesis, and fragmentation of single crystals), polycrystalline alloys, etc. It is shown (by impedance spectroscopy), that different technological forms of identical chemical composition (R, M, y) exhibit different electrical characteristics. The maximum conductivity is observed for the single-crystal form of R{sub 1–y}M{sub y}F{sub 3–y} tysonite phases, which provides (in contrast to other technological forms) the formation of true volume ion-conducting characteristics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Increase in the Fluorine-Ion Conductivity of Single Crystals of Tysonite-type CeF{sub 3} Superionic Conductor by Substituting Polarized Cd{sup 2+} Ions for Ce{sup 3+} Ions

The fluorine-ion conductivity of single crystals with a tysonite (LaF{sub 3}) structure with heterovalent isomorphic substitutions of highly polarizable Cd{sup 2+} cations with a 18-electron shell for rare earth ions Ce{sup 3+} have been studied for the first time. Ce{sub 0.995}Cd{sub 0.005}F{sub 2.995} single crystals have been grown from melt by the Bridgman technique in a fluorinating atmosphere. The fluorine-ion conductivity of single crystal is measured by impedance spectroscopy in the temperature range from 153 to 1073 K, where it increases by a factor of 10{sup 9}, approaching the value σ{sub dc} = 5 × 10{sup –2} S/cm at 1073 K. At T{sub 0} = 450 ± 20 K, the dependence σ{sub dc}(T) is split into two portions with the ion-transport activation enthalpy ΔH{sub σ} = 0.39 ± 0.01 eV (T < T{sub 0}) and ΔH{sub σ} = 0.23 ± 0.02 eV (T > T0). It is found that at T = 293 K the conductivity σ{sub dc} = 3 × 10{sup –5} S/cm of Ce{sub 0.995}Cd{sub 0.005}F{sub 2.995} crystal is higher by a factor of 10 than the conductivity of the tysonite matrix CeF{sub 3} and close to the σ{sub dc} value for Ce{sub 0.995}Sr{sub 0.005}F{sub 2.995} crystal. This finding indicates a significant effect of the substitutions of Cd{sup 2+} ions for Ce{sup 3+} on the σdc value and the advantage of Cd{sup 2+} ions over Ca{sup 2+} and Ba{sup 2+} from the viewpoint of increasing σ{sub dc}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Negative differential conductance in InAs wire based double quantum dot induced by a charged AFM tip

We investigate the conductance of an InAs nanowire in the nonlinear regime in the case of low electron density where the wire is split into quantum dots connected in series. The negative differential conductance in the wire is initiated by means of a charged atomic force microscope tip adjusting the transparency of the tunneling barrier between two adjoining quantum dots. We confirm that the negative differential conductance arises due to the resonant tunneling between these two adjoining quantum dots. The influence of the transparency of the blocking barriers and the relative position of energy states in the adjoining dots on a decrease of the negative differential conductance is investigated in detail.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Calculation of Thermal Conductivity Coefficients of Electrons in Magnetized Dense Matter

The solution of Boltzmann equation for plasma in magnetic field with arbitrarily degenerate electrons and nondegenerate nuclei is obtained by Chapman−Enskog method. Functions generalizing Sonine polynomials are used for obtaining an approximate solution. Fully ionized plasma is considered. The tensor of the heat conductivity coefficients in nonquantized magnetic field is calculated. For nondegenerate and strongly degenerate plasma the asymptotic analytic formulas are obtained and compared with results of previous authors. The Lorentz approximation with neglecting of electron−electron encounters is asymptotically exact for strongly degenerate plasma. For the first time, analytical expressions for the heat conductivity tensor for nondegenerate electrons in the presence of a magnetic field are obtained in the three-polynomial approximation with account of electron−electron collisions. Account of the third polynomial improved substantially the precision of results. In the two-polynomial approximation, the obtained solution coincides with the published results. For strongly degenerate electrons, an asymptotically exact analytical solution for the heat conductivity tensor in the presence of a magnetic field is obtained for the first time. This solution has a considerably more complicated dependence on the magnetic field than those in previous publications and gives a several times smaller relative value of the thermal conductivity across the magnetic field at ωτ * 0.8.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Features of the mechanism of electrical conductivity of semiinsulating CdTe crystals

Temperature dependence of electrical characteristics of p-CdTe semi4nsulating single-crystals are studied, and substantial features of their electrical conductivity not described in available publications are revealed. The activation energy of the p-type conduction material close to the intrinsic one can be both lower and higher than the half-width of the band gap of semi conductor. The results of the analysis of statistics of electrons and holes based on the electroneutrality equation showed that the observed features of electrical properties of the material can be interpreted based on the specific features of compensation processes. The procedure of determining the ionization energy and degree of compensation of acceptors responsible for electrical conductivity of the material is suggested. It is shown that, in the limits of climatic temperature variations, inversion of the conduction type can be observed, and, as a consequence, the Schottky contact can disappear in the CdTe-based detector of the X-ay and {gamma} radiation.

36 MATERIALS SCIENCE↗

Low-temperature conductivity in CuGaS{sub 2} single crystals

CuGaS{sub 2} single crystals are grown by the Bridgman-Stockbarger method. X-ray diffraction and Raman studies are performed. It is shown that the conductivity at low temperatures has an activation mechanism: in the range of 100–300 K, impurity conduction with an acceptor activation energy of 12 meV dominates; at temperatures below 100 K, Mott conductivity, i.e., so-called hopping conductivity with a variable hop length prevails. The density of localized states and the average carrier hop length are estimated.

36 MATERIALS SCIENCE↗

Effects of Mechanical Strain on Ionic Conductivity in the Interface between LiPON and Ni-Mn Spinel

We present first-principles calculations to understand ionic conductivity in the interface between lithium phosphorous oxynitride (LiPON) and Ni-Mn spinel (LNM), with emphasis on the effect of mechanical strain. Two LiPON/LNM interfaces, one with and the other without BaTiO3 (BTO) additive, are modeled as abrupt interfaces to minimize the effects of the space-charge layer formation. It is observed that the interface with BTO additive has higher ionic conductivity than the other. Comparison of structural geometry indicates that the LiPON part of the LiPON/LNM interface is contracted but it recovers with BTO additive, which suggests the relevance of mechanical strain to ionic conductivity in these interfaces and the role of BTO in controlling the mechanical strain. The activation energy barriers of Li-hopping in a bulk LiPON, calculated at different levels of mechanical strain, exhibit a significant increase with compressive strain, supporting the suggested effect of mechanical strain in the interfaces. Lastly, this result implies that ionic conductivity in the interface between LiPON and cathode can be enhanced by modifying the interface but with appropriate size and distribution of additives.

25 ENERGY STORAGE↗

Composition and Manufacturing Effects on Electrical Conductivity of Li/FeS 2 Thermal Battery Cathodes

The electrical conductivity is key to the performance of thermal battery cathodes. In this work we present the effects of manufacturing and processing conditions on the electrical conductivity of Li/FeS2 thermal battery cathodes. Finite element simulations were used to compute the conductivity of three-dimensional microcomputed tomography cathode microstructures and compare results to experimental impedance spectroscopy measurements. A regression analysis reveals a predictive relationship between composition, processing conditions, and electrical conductivity; a trend which is largely erased after thermally-induced deformation. Moreover, the trend applies to both experimental and simulation results, although is not as apparent in simulations. This research is a step toward a more fundamental understanding of the effects of processing and composition on thermal battery component microstructure, properties, and performance.

25 ENERGY STORAGE↗

Exploring limitations in the induced polarization versus surface conductivity relationship in the case of wetland soils

Recent induced polarization studies suggest that the real part of surface conductivity (σ' surf ) scales linearly with the imaginary conductivity (σ'' = σ'' surf ) or normalized chargeability (Mn) for a range of soil types. The coefficients of this relationship l and l_Mn ( l = σ''/σ' surf or l_Mn = Mn/σ' surf ) allow the separation of the surface and electrolytic conductivities from the bulk conductivity. However, the dependence of these constants on varying soil physicochemical properties, including under unsaturated conditions, is yet to be assessed. Using estimates of σ' surf from 18 undisturbed soil samples from a restored wetland and σ'' measured over a frequency range of 0.01 Hz to 10 kHz, the σ' surf and σ'' were compared with the laboratory measurements of soil properties. Also, l and l_Mn were calculated for each soil sample and regressed them against the soil properties. We find an apparent dependence of l on soil texture, bulk density, organic matter, and moisture contents, with coefficients of determination (R 2 ) ranging from 0.5 to 0.65 at low frequencies (e.g., 1 Hz) but not at high frequencies (e.g., 936 Hz). This dependence of l on soil texture results from the insensitivity of σ'' at low frequency to σ' surf and, by implication, to the soil properties controlling σ' surf . In contrast, l_Mn indicates no correlation with the soil properties because Mn is linearly correlated with σ' surf and correlated with the soil properties controlling σ' surf . Finally, our results call for caution on the application of σ'' at a single frequency as a proxy of σ' surf because σ'' is not necessarily correlated with σ' surf across all soil types. Although using l_Mn derived from multifrequency measurements overcomes this limitation, field acquisition of spectral information (e.g., up to 1000 Hz) remains a challenge.

54 ENVIRONMENTAL SCIENCES↗

Interfacial Layer Growth Condition Dependent Electrical Conduction in HfO2/SiO2 Heterostructured Thin Films

The electrical conduction mechanism contributing to the leakage current at different field regions has been studied in this work. The current-voltage (I-V) measurement of TiN/HfO{sub 2}/SiO{sub 2}/P-Si nMOS capacitor has been taken for two different interfacial layer (SiO{sub 2}) growth conditions such as in situ steam grown (ISSG) and chemical processes. It is observed that Poole-Frenkel mechanism is the dominant conduction mechanism in high field region whereas Ohmic conduction is dominant in the low field region. Also it is seen that the gate leakage current is reduced for the devices having chemically grown interfacial layer compared to that of ISSG devices. Both trap energy level ({phi}{sub t}) and activation energy (E{sub a}) increase in the chemically grown interfacial layer devices for the Poole-Frenkel and Ohmic conduction mechanisms respectively in comparison to ISSG devices. Trap energy level ({phi}{sub t}) of {approx} 0.2 eV, obtained from Poole-Frenkel mechanism indicates that the doubly ionized oxygen vacancies (V{sup 2-}) are the active defects and are contributing to the leakage current in these devices.

14 SOLAR ENERGY↗

Determining the Porosity and Saturated Hydraulic Conductivity of Binary Mixtures

Gravels and coarse sands make up significant portions of some environmentally important sediments, while the hydraulic properties of the sediments are typically obtained in the laboratory using only the fine fraction (e.g., <2 mm or 4.75 mm). Researchers have found that the content of gravel has significant impacts on the hydraulic properties of the bulk soils. Laboratory experiments were conducted to measure the porosity and the saturated hydraulic conductivity of binary mixtures with different fractions of coarse and fine components. We proposed a mixing-coefficient model to estimate the porosity and a power-averaging method to determine the effective particle diameter and further to predict the saturated hydraulic conductivity of binary mixtures. The proposed methods could well estimate the porosity and saturated hydraulic conductivity of the binary mixtures for the full range of gravel contents and was successfully applied to two data sets in the literature.

54 ENVIRONMENTAL SCIENCES↗

Determination of water saturation using gas phase partitioning tracers and time-lapse electrical conductivity measurements

Water saturation is an important indicator of contaminant distribution and plays a governing role in contaminant transport within the vadose zone. Understanding the water saturation distribution is critical for both remediation and contaminant flux monitoring in unsaturated environments. In this work we propose and demonstrate a method of remotely determining water saturation levels using gas phase partitioning tracers and time-lapse bulk electrical conductivity measurements. The theoretical development includes the partitioning chemistry for the tracers we demonstrate (ammonia and carbon dioxide), as well as a review of the petrophysical relationship governing how these tracers influence bulk conductivity. We also investigate methods of utilizing secondary information provided by electrical conductivity breakthrough magnitudes induced by the tracers. We test the method on clean, well characterized, intermediate-scale sand columns under controlled conditions. Results demonstrate the capability to predict partitioning coefficients and accurately monitor gas breakthrough curves along the length of the column according to the corresponding electrical conductivity response, leading to accurate water saturation estimates. This work is motivated by the need to develop effective characterization and monitoring techniques for contaminated deep vadose zone environments, and provides a proof-of-concept toward uniquely characterizing and monitoring water saturation levels at the field scale and in three-dimensions using electrical resistivity tomography.

30 DIRECT ENERGY CONVERSION↗

Determining the Porosity and Saturated Hydraulic Conductivity of Binary Mixtures

Gravels and coarse sands make up significant portions of some environmentally important sediments, while the hydraulic properties of the sediments are typically obtained in the laboratory using only the fine fraction (e.g., <2 mm or 4.75 mm). Researchers have found that the content of gravel has significant impacts on the hydraulic properties of the bulk soils. Laboratory experiments were conducted to measure the porosity and the saturated hydraulic conductivity of binary mixtures with different fractions of coarse and fine components. We proposed a mixing-coefficient model to estimate the porosity and a power-averaging method to determine the effective particle diameter and further to predict the saturated hydraulic conductivity of binary mixtures. The proposed methods could well estimate the porosity and saturated hydraulic conductivity of the binary mixtures for the full range of gravel contents and was successfully applied to two data sets in the literature.

54 ENVIRONMENTAL SCIENCES↗

Computational fluid dynamics analyses of lateral heat conduction, coolant azimuthal mixing and heat transfer predictions in a BR2 fuel assembly geometry.

To support the analyses related to the conversion of the BR2 core from highly-enriched (HEU) to low-enriched (LEU) fuel, the thermal-hydraulics codes PLTEMP and RELAP-3D are used to evaluate the safety margins during steady-state operation (PLTEMP), as well as after a loss-of-flow, loss-of-pressure, or a loss of coolant event (RELAP). In the 1-D PLTEMP and RELAP simulations, conduction in the azimuthal and axial directions is not accounted. The very good thermal conductivity of the cladding and the fuel meat and significant temperature gradients in the lateral directions (axial and azimuthal directions) could lead to a heat flux distribution that is significantly different than the power distribution. To evaluate the significance of the lateral heat conduction, 3-D computational fluid dynamics (CFD) simulations, using the CFD code STAR-CD, were performed. Safety margin calculations are typically performed for a hot stripe, i.e., an azimuthal region of the fuel plates/coolant channel containing the power peak. In a RELAP model, for example, a channel between two plates could be divided into a number of RELAP channels (stripes) in the azimuthal direction. In a PLTEMP model, the effect of azimuthal power peaking could be taken into account by using engineering factors. However, if the thermal mixing in the azimuthal direction of a coolant channel is significant, a stripping approach could be overly conservative by not taking into account this mixing. STAR-CD simulations were also performed to study the thermal mixing in the coolant. Section II of this document presents the results of the analyses of the lateral heat conduction and azimuthal thermal mixing in a coolant channel. Finally, PLTEMP and RELAP simulations rely on the use of correlations to determine heat transfer coefficients. Previous analyses showed that the Dittus-Boelter correlation gives significantly more conservative (lower) predictions than the correlations of Sieder-Tate and Petukhov. STAR-CD 3-D simulations were performed to compare heat transfer predictions from CFD and the correlations. Section III of this document presents the results of this analysis.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Optimality and Conductivity for Water Flow: From Landscapes, to Unsaturated Soils, to Plant Leaves

Optimality principles have been widely used in many areas. Based on an optimality principle that any flow field will tend toward a minimum in the energy dissipation rate, this work shows that there exists a unified form of conductivity relationship for three different flow systems: landscapes, unsaturated soils and plant leaves. The conductivity, the ratio of water flux to energy gradient, is a power function of water flux although the power value is system dependent. This relationship indicates that to minimize energy dissipation rate for a whole system, water flow has a small resistance (or a large conductivity) at a location of large water flux. Empirical evidence supports validity of the relationship for landscape and unsaturated soils (under gravity dominated conditions). Numerical simulation results also show that the relationship can capture the key features of hydraulic structure for a plant leaf, although more studies are needed to further confirm its validity. Especially, it is of interest that according to this relationship, hydraulic conductivity for gravity-dominated unsaturated flow, unlike that defined in the classic theories, depends on not only capillary pressure (or saturation), but also the water flux. Use of the optimality principle allows for determining useful results that are applicable to a broad range of areas involving highly non-linear processes and may not be possible to obtain from classic theories describing water flow processes.

54 ENVIRONMENTAL SCIENCES↗

Hydraulic Conductivity of Saltstone Formulated Using 1Q11, 2Q11 and 3Q11 Tank 50 Slurry Samples

As part of the Saltstone formulation work requested by Waste Solidification Engineering (WSE), Savannah River National Laboratory (SRNL) was tasked with preparing Saltstone samples for fresh property analysis and hydraulic conductivity measurements using actual Tank 50 salt solution rather than simulated salt solution. Samples of low level waste salt solution collected from Tank 50H during the first, second, and third quarters of 2011 were used to formulate the Saltstone samples. The salt solution was mixed with premix (45 wt % slag, 45 wt % fly ash, and 10 wt % cement), in a ratio consistent with facility operating conditions during the quarter of interest. The fresh properties (gel, set, bleed) of each mix were evaluated and compared to the recommended acceptance criteria for the Saltstone Production Facility. ASTM D5084-03, Method C was used to measure the hydraulic conductivity of the Saltstone samples. The hydraulic conductivity of Saltstone samples prepared from 1Q11 and 2Q11 samples of Tank 50H is 4.2E-9 cm/sec and 2.6E-9 cm/sec, respectively. Two additional 2Q11 and one 3Q11 sample were not successfully tested due to the inability to achieve stable readings during saturation and testing. The hydraulic conductivity of the samples made from Tank 50H salt solution compare well to samples prepared with simulated salt solution and cured under similar conditions (1.4E-9 - 4.9E-8 cm/sec).

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗