Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CONCRETE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,639 records · Page 91
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Performance assessment of active insulation systems in residential buildings for energy savings and peak demand reduction

Active insulation systems (AISs) in buildings are envelopes that integrate thermal insulation, thermal energy storage, and controls. Although different designs for AISs have been proposed in the literature, a comprehensive analysis of feasible AISs is lacking. This paper discusses the energy performance, peak demand reduction potential, and performance characteristics of an AIS that uses a concrete wall as thermal mass sandwiched between two solid-state thermal switches (STSs). These STSs change their thermal conductivity using an on/off metal switch to create or break a thermal bridge across the STS. This paper first describes the experimental setup, used to determine the ratio of thermal resistance during R-high (low thermal conductivity) and R-low (high thermal conductivity) states of the STSs. This ratio was then used in whole-building energy simulations to evaluate the performance of AIS walls across different climate zones with/without a freeze timer of 60 min. The timer was added to reduce the number of switches of STSs from one state to another, and hence the energy needed for these switches. Analysis of the switching frequency and interval of STSs, thermal conductivity of walls, impact of wall orientation, and heat transfer through the wall from the use of AIS at different climate zones/locations were performed. The simulation results show that the AIS can achieve energy savings ranging from ~980 to 2,290 kWh in a single-family home with a floor area of ~220 m 2 compared with an IECC 2018 baseline. We found the energy savings was higher in dry climate zones which represent 17% of residential buildings in the United States, compared to humid or marine climate.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2019

Rapid method to determine Polonium-210 in urban matrices

A rapid technique for the determination of polonium-210 in urban matrices has been developed that can be used following a radiological event. Samples such as concrete, soil and granite are fused with sodium hydroxide to minimize polonium volatility during sample digestion and to achieve complete sample dissolution. Complete dissolution of samples is vital to ensure method ruggedness. Polonium is concentrated and separated from the sample matrix using an iron hydroxide precipitation and extraction chromatography and subsequently measured by alpha spectrometry following microprecipitation with bismuth phosphate. The chromatographic separation removes alpha emitting interferences and matrix constituents which can adversely impact the measurement via alpha spectrometry.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Defect and satellite characteristics of additive manufacturing metal powders

Metal additive manufacturing (AM) requires high-quality metal powders to three-dimensionally (3D) print metallic components with complex and customizable geometries. The lack of quantification of AM metal powders creates quality control challenges for 3D printed components, increases the uncertainty of printing reliability and net cost of inspected and certified printed components, and reduces the recyclability of used powders. However, critical characteristics of AM metal powders that are decisive factors for the 3D printing process, such as internal porosity, contamination, and satellite feature, remain ambiguous. In this work, we developed a novel approach to 3D quantify key characteristics of AM metal powders down to individual particles by using high-resolution synchrotron x-ray computed tomography. Empowered by the penetrative capability of high-energy x-ray, internal porosity and contamination within as-atomized metal powders from high-entropy alloys to nickel-based superalloys were evaluated. Additionally, the newly-developed dispersion method enables the homogeneous separation of individual particles, and consequently, results in the implementation of 3D particle shape analysis. To resolve a major challenge of identification and quantification of satellite-feature particles in as-atomized AM metal powders, the satellite features were quantitated by modeling and analyzing the shape parameter of local thickness variance. Furthermore, the 3D analytical methods of particle assessment in this study can be applied to other materials systems like rock, food, and pharmaceutical particles, and provide insights for process optimization across powder metallurgy, concrete, food and pharmaceutical manufacturing, and AM industries.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Silencing Drp1 inhibits glioma cells proliferation and invasion by RHOA/ ROCK1 pathway

Backgrounds: Dynamin-related protein 1 (Drp1) is a newly discovered therapeutic target for tumor initiation, migration, proliferation, and chemosensitivity. In the present study, we aimed to examine the level of expression and distribution of DRP1 in glioma tissues and explore the concrete mechanism of DRP1 played in glioma. Methods: Expression of DRP1 in glioma tissues was determined by immunohistochemistry staining. The DRP1 gene was knocked down using small interfering RNA, and was overexpressed using plasmids in glioma cells. To assess changes in cell function, in vitro assays for invasion and growth were applied. Protein expression was tested by using Western-blot method. Variation of F-actin in cells was analyzed using immunofluorescence staining. Interactions between proteins were determined by co-immunoprecipitation. Results: The protein expression levels of DRP1 were significantly increased in glioma tissues compared to the normal brain tissues. Down-regulation of DRP1 decreased cell proliferation and invasion, and inhibited the formation of pseudopodias and microvillis. Moreover, a possible link between DRP1 and RHOA was confirmed when interactions between these two proteins were observed in the cells. Conclusions: Our results demonstrated that silencing DRP1 regulated the cytoskeleton remodeling through inhibiting RHOA/ROCK1 pathway, and thus decreased the proliferation and invasion of glioma cells. - Highlights: • DPR1 is significantly increased in glioma tissues. • Down-regulation of DRP1 in glioma cells inhibits cell proliferation. • Down-regulation of DRP1 in glioma cells inhibits cell invasion and induces F-actin remodeling. • Down-regulation of DRP1 inhibits RHOA/ROCK1 pathway in glioma cells.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2018

CART peptide activates the Nrf2/HO-1 antioxidant pathway and protects hippocampal neurons in a rat model of Alzheimer's disease

Highlights: • CART peptide reduced the accumulation of Aβ in the hippocampus of AD rats. • CART peptide improved the cognitive function of AD rats. • CART peptide attenuated the oxidative stress damage in the hippocampus of AD rats. • CART activated the Nrf2/HO-1 pathway to exert antioxidation. • CART inhibit the apoptosis of hippocampal neurons. The accumulation of amyloid-beta (Aβ) and oxidative stress damage in the brain are recognized as early features of Alzheimer's disease (AD). The cocaine- and amphetamine-regulated transcript (CART) peptide may possibly play an antioxidative role in neurons. The aim of this study was to investigate the potential antioxidant mechanism of CART peptide in a rat model of AD. We microinjected of Aβ{sub 1-42} (2μl/4μg/hemisphere) into rat hippocampus to set a rat model of AD. A pre-microinjection of CART peptide (1μl/0.02μg/hemisphere) into rat hippocampus was administered for five consecutive days before Aβ{sub 1-42} treatment. We found that Aβ{sub 1-42} microinjection led to reduction of endogenous CART level in rat hippocampus. CART pretreatment improved the spatial memory and locomotor ability of AD rats. CART peptide decreased the Aβ{sub 1-42} and Aβ production-associated enzyme BACE1 levels. Moreover, CART peptide attenuated the oxidative stress damage with a concrete manifestation of increased MDA as well as decreased T-SOD, GSH and ATP levels in the hippocampus of Aβ{sub 1-42}-treated rat, which may be causatively implicated the activating of Nrf2/HO-1 signaling pathway. Furthermore, CART peptide attenuated neuronal apoptosis with decreased Bax, caspase-9 and caspase-3 levels and increased Bcl-2 level in rat hippocampus. Our results therefore indicate that CART peptide could serve as an antioxidant in early therapy for AD.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2021

The Stellar decomposition: A compact representation for simplicial complexes and beyond

Here, we introduce the Stellar decomposition, a model for efficient topological data structures over a broad range of simplicial and cell complexes. A Stellar decomposition of a complex is a collection of regions indexing the complex’s vertices and cells such that each region has sufficient information to locally reconstruct the star of its vertices, i.e., the cells incident in the region’s vertices. Stellar decompositions are general in that they can compactly represent and efficiently traverse arbitrary complexes with a manifold or non-manifold domain. They are scalable to complexes in high dimension and of large size, and they enable users to easily construct tailored application-dependent data structures using a fraction of the memory required by a corresponding global topological data structure on the complex. As a concrete realization of this model for spatially embedded complexes, we introduce the Stellar tree, which combines a nested spatial tree with a simple tuning parameter to control the number of vertices in a region. Stellar trees exploit the complex’s spatial locality by reordering vertex and cell indices according to the spatial decomposition and by compressing sequential ranges of indices. Stellar trees are competitive with state-of-the-art topological data structures for manifold simplicial complexes and offer significant improvements for cell complexes and non-manifold simplicial complexes. We conclude with a high-level description of several mesh processing and analysis applications that utilize Stellar trees to process large datasets.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2021

Converting plastic waste pyrolysis ash into flash graphene

Pyrolysis of plastic waste (PW), a commercial method of recycling, is currently economically challenging and produces up to 20% by mass valueless pyrolysis ash (PA) as a byproduct. Here, direct, facile upcycling of PW-derived PA into high purity turbostratic flash graphene (tFG) is demonstrated. The tFG displays excellent dispersibility, yielding a concentration of 2.84 mg/mL in aqueous surfactant solution. The tFG was used to fabricate tFG-PVA nanocomposites, and low doses of tFG (0.1%–1%) improve failure strain by 15%–30% when compared to the samples of neat PVA. Furthermore, the addition of tFG to PVA films showed decreased hydrophilic interactions, increasing the water contact angle by 235% and adsorbing 500% less water than neat PVA. The tFG was also added to Portland cement paste as well as concrete, and exhibited 43% and 25% increases in compressive strength, respectively. The tFG is used directly in both composite applications, requiring no purification or chemical functionalization, unlike many other products used in nanocomposites.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Carbonation dynamics of hydrated alite revealed by electron microscopy

CO 2 sequestration in concrete is crucial to relieve the environmental burden, while the carbonation mechanisms remain unclear. Here, we explored the carbonation dynamics of alite hydrates through electron microscopy. We discovered that calcite is the main phase of carbonate crystals throughout the entire carbonation period in the alite system. Further, the shape evolution of calcite crystals was captured: spindle carbonates initially formed on C-S-H substrate and then transformed into rhombohedrons; Intermediate states such as polyhedral particles and layered rhomboids were also observed. Based on our quantitative calculations, the growth rate of calcite particles was determined approximately 0.2 μm/day, which may be affected by the relative concentration between calcium ions and CO 2 source. A direct relation between the microstructure and mechanical properties of calcite was uncovered using atomic force microscopy. Furthermore, we found that the morphology development of calcite crystals during carbonation may be explained by the surface energy variation of different facets. This work suggests a unique approach to track carbonation kinetics and provides new opportunities to unveil underlying carbonation mechanisms at the nanoscale.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

Predicting effective thermal and elastic properties of cementitious composites containing polydispersed hollow and core-shell micro-particles

Micro- and nano-sized hollow and core-shell particles (CSPs) have attracted tremendous interests in developing functional cementitious composites and concretes. In this paper, a general method is developed to predict the thermal and elastic properties of cementitious composites containing core-shell and hollow micro-particles. The model follows a two-stage homogenization process – CSP inclusions together with their surrounding interfacial transition zone (ITZ) are first treated as equivalent solid particles, and then the homogenized properties of the composite system are obtained using numerical (i.e., finite element) or analytical (Mori-Tanaka) approaches. Compared with other homogenization methods, the proposed model is easy-to-use and versatile. The numerical model, validated by experimental results, is then used to guide the design of functional cementitious composites. The results show that CSP particle size (or relative shell thickness), volume fraction, shell property, and the size of the ITZ have significant impacts on the effective thermal and elastic properties of cementitious composites; whereas the particle size distribution pattern has relatively minor influence. In addition, the effective property of the composite is more sensitive to the particle property change when CSP inclusions are much stiffer or more thermally conductive than the matrix. Lastly, a scoping study is conducted to elucidate the relationship between the effective thermal conductivity and effective elastic moduli for cementitious composites containing CSP additives with different shell materials, particle sizes, and volume concentrations etc.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Production of α' H -belite-CSA cement at low firing temperatures

A global increase in population creates a need for infrastructure development to stimulate economic growth and improve quality of life. Concrete plays a significant role in this development due to its availability and mechanical strength. Ordinary Portland cement (OPC) has been the most utilized binder in the construction industry since its formulation. However, OPC production has an enormous energy demand and generates large quantities of CO 2 . This research investigates the production of a clinker, containing mainly the hydraulically activated alpha'H-belite polymorph and calcium sulfoaluminate (ye'elimite or C4A3$\acute{S}$), at a lower firing temperature, using a combination of fluoride and boron oxide. This novel clinker addresses the problem of creating high strength cements at extremely low firing temperatures of 1000–1050 °C (a decrease of 450–500 °C as compared to OPC, and a decrease of 200–250 °C as compared to calcium sulfoaluminate (CSA) cement). This clinker reduces CO 2 emissions from energy consumption and by producing phases with lower limestone requirements. The combination of lower firing temperatures and clinker phases that require lower limestone requirements provide a means to reduce CO 2 emissions.

36 MATERIALS SCIENCE↗
DOE OSTI2013

Gel nanostructure in alkali-activated binders based on slag and fly ash, and effects of accelerated carbonation

Binders formed through alkali-activation of slags and fly ashes, including ‘fly ash geopolymers’, provide appealing properties as binders for low-emissions concrete production. However, the changes in pH and pore solution chemistry induced during accelerated carbonation testing provide unrealistically low predictions of in-service carbonation resistance. The aluminosilicate gel remaining in an alkali-activated slag system after accelerated carbonation is highly polymerised, consistent with a decalcification mechanism, while fly ash-based binders mainly carbonate through precipitation of alkali salts (bicarbonates at elevated CO{sub 2} concentrations, or carbonates under natural exposure) from the pore solution, with little change in the binder gel identifiable by nuclear magnetic resonance spectroscopy. In activated fly ash/slag blends, two distinct gels (C–A–S–H and N–A–S–H) are formed; under accelerated carbonation, the N–A–S–H gel behaves comparably to fly ash-based systems, while the C–A–S–H gel is decalcified similarly to alkali-activated slag. This provides new scope for durability optimisation, and for developing appropriate testing methodologies. -- Highlights: •C-A-S-H gel in alkali-activated slag decalcifies during accelerated carbonation. •Alkali-activated fly ash gel changes much less under CO{sub 2} exposure. •Blended slag-fly ash binder contains two coexisting gel types. •These two gels respond differently to carbonation. •Understanding of carbonation mechanisms is essential in developing test methods.

36 MATERIALS SCIENCE↗
DOE OSTI2014

A modified ASTM C1012 procedure for qualifying blended cements containing limestone and SCMs for use in sulfate-rich environments

Blended Portland cements containing up to 15% limestone have recently been introduced into Canada and the USA. These cements were initially not allowed for use in sulfate environments but this restriction has been lifted in the Canadian cement specification, provided that the “limestone cement” includes sufficient SCM and that it passes a modified version of the CSA A3004-C8 (equivalent to ASTM C1012) test procedure run at a low temperature (5 °C). This new procedure is proposed as a means of predicting the risk of the thaumasite form of sulfate attack in concretes containing limestone cements. The goal of the present study was to better understand how this approach works both in practice and in theory. Results from three different laboratories utilizing the CSA A3004-C8 test procedure are compared and analyzed, while also taking into account the results of thermodynamic modeling and of thaumasite formation experiments conducted in dilute suspensions.

36 MATERIALS SCIENCE↗
DOE OSTI2014

Formation of magnesium silicate hydrate (M-S-H) cement pastes using sodium hexametaphosphate

Magnesium silicate hydrate (M-S-H) gel is formed by the reaction of brucite with amorphous silica during sulphate attack in concrete and M-S-H is therefore regarded as having limited cementing properties. The aim of this work was to form M-S-H pastes, characterise the hydration reactions and assess the resulting properties. It is shown that M-S-H pastes can be prepared by reacting magnesium oxide (MgO) and silica fume (SF) at low water to solid ratio using sodium hexametaphosphate (NaHMP) as a dispersant. Characterisation of the hydration reactions by x-ray diffraction and thermogravimetric analysis shows that brucite and M-S-H gel are formed and that for samples containing 60 wt.% SF and 40 wt.% MgO all of the brucites react with SF to form M-S-H gel. These M-S-H cement pastes were found to have compressive strengths in excess of 70 MPa.

36 MATERIALS SCIENCE↗
DOE OSTI2015

Study on the hydration and microstructure of Portland cement containing diethanol-isopropanolamine

Diethanol-isopropanolamine (DEIPA) is a tertiary alkanolamine used in the formulation of cement grinding-aid additives and concrete early-strength agents. In this research, isothermal calorimetry was used to study the hydration kinetics of Portland cement with DEIPA. A combination of X-ray powder diffraction (XRPD), scanning electron microscopy (SEM), differential scanning calorimetry (DSC)–thermogravimetric (TG) analysis and micro-Raman spectroscopy was used to investigate the phase development in the process of hydration. Mercury intrusion porosimetry was used to study the pore size distribution and porosity. The results indicate that DEIPA promotes the formation of ettringite (AFt) and enhances the second hydration rate of the aluminate and ferrite phases, the transformation of AFt into monosulfoaluminate (AFm) and the formation of microcrystalline portlandite (CH) at early stages. At later stages, DEIPA accelerates the hydration of alite and reduces the pore size and porosity.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Autogenous healing of sea-water exposed mortar: Quantification through a simple and rapid permeability test

Concrete has an autogenous ability to heal cracks potentially contributing to its functional water tightness and durability. Here, we quantify the crack-healing capacity of sea-water submerged mortar specimens through a simple and rapid permeability test. Defined crack width geometries were created in blast furnace slag cement specimens allowing healed specimens to be quantified against unhealed specimens. Specimens with 0.2 mm wide cracks were not permeable after 28 days submersion. Specimens with 0.4 mm cracks had decreases in permeability of 66% after 28 days submersion, and 50–53% after 56 days submersion. Precipitation of aragonite and brucite in the cracks was the main cause of crack healing. Healing potential was dependent on the initial crack width, thermodynamic considerations and the amount of ions available in the crack. To our knowledge, this is the first study to quantify the functional autogenous healing capacity of cracked sea-water exposed cementitious specimens.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Calcining natural zeolites to improve their effect on cementitious mixture workability

Despite the benefits to long-term concrete durability, the use of natural zeolites as supplementary cementitious materials (SCMs) is uncommon due to their high water demand. The motivation of the research presented here was to better understand how the physical and chemical characteristics of natural zeolites influenced the workability of cementitious mixtures and whether those properties could be modified through calcination to mitigate the high water demand of natural zeolites. In this research, three different natural zeolites were characterized in their original and calcined states using x-ray diffraction (XRD) and Brunauer–Emmett–Teller (BET) surface area measurements. Rheology experiments were then conducted on cementitious pastes containing these natural zeolites, in their original and calcined states, to assess mixture viscosity and yield stress. Results showed that calcination destabilized the structure of the natural zeolites and reduced their surface area, which led to an improvement in mixture viscosity and yield stress.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Effect of the inherent alkalis of alkali activated slag on the risk of alkali silica reaction

Alkali silica reaction (ASR) occurred in the alkali activated slag (AAS) concrete was evaluated by a revised mortar prism method. The mortars were made of blast furnace slags activated by alkali silicate solution possessing different modulus (0.5, 0.75, 1 and 2) as well as cations (sodium and potassium) and standard sand with a volume replacement of 25 vol% by borosilicate glass beads. Their changes in length and dynamic elastic modulus were monitored up to 7 months. The results showed that ASR has taken place among some mortars, which were evident under both light microscopy and electron microscopy with EDX analysis. The results also revealed that high alkali content did promote the risk of ASR but the degradation due to ASR was affected in a much more complex way.

36 MATERIALS SCIENCE↗