Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Albedo”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,639 records · Page 91
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Estimating and parameterizing mismatch power loss in bifacial photovoltaic systems

Nonuniform irradiance on the rear side of bifacial photovoltaic (PV) systems can cause additional mismatch loss, which may not be appropriately captured in PV energy production estimates and software. We evaluated several scenarios including horizontal single-axis tracking (HSAT) over natural ground-cover and rooftop-mounted systems over high albedo reflective roofs. We found mismatch losses of up to 1.5% annual loss for very close-mounted (0.15 m) rooftop systems, but losses for HSAT systems and high-ground-clearance rooftop systems were lower (<0.5%). A simplified empirical relationship was found that links the spatial variation of irradiance (specifically, the mean absolute difference of irradiance) to the resulting mismatch loss factor, with an R 2 better than .99. Furthermore, this approximate relationship was experimentally validated on mismatched PV modules, and it provides a basis for rapidly estimating bifacial mismatch loss factors for use in hourly PV performance simulations such as PVSyst or SAM. Additional parameters investigated include (a) climate dependence and module orientation, which were not found to have a strong impact on bifacial mismatch losses and (b) PV module fill factor and bifaciality ratio, which did have a strong linear impact on mismatch losses.

14 SOLAR ENERGY↗
DOE OSTI2026

Haze–cloud correlations mediated by supersaturation fluctuations

Atmospheric aerosol particles that contain water-soluble components can absorb water vapor in humid environments and form either haze particles or cloud droplets, depending on supersaturation conditions. Laboratory and in situ measurements have shown that haze particles and cloud droplets often coexist and compete for available water vapor in shallow clouds and fogs, especially under polluted conditions. It is expected that more aerosol particles can form more haze particles and cloud droplets, so that the haze and cloud number concentrations are positively correlated. However, recent large-eddy simulations show that haze and cloud number concentration can be negatively correlated under extremely polluted conditions. Haze–cloud interactions across different environmental settings remain poorly understood. In this study, experiments in a convection cloud chamber with the same aerosol injection rate show that, as supersaturation forcing increases (i.e., changing from polluted to clean conditions), the covariance between haze and cloud droplet number concentration changes from negative to positive and finally to zero. Large-eddy simulations (LES) of the cloud chamber with a fixed supersaturation forcing but varying aerosol injection rates show a similar result for the haze–cloud correlation: near zero in clean, mean-supersaturation-dominated activation conditions; positive in moderate, supersaturation-fluctuation-influenced activation conditions; and negative in polluted, supersaturation-fluctuation-dominated activation conditions. A theoretical covariance framework was developed to interpret this behavior based on the relative magnitude and signs of the correlations between supersaturation and the populations of haze and cloud droplets. Significantly, experiments, LES, and theory all yield the same three-regime behavior for the sign of the haze–cloud covariance. Furthermore, our results show that the haze–cloud covariance remains robust and easily measurable, thereby providing a useful metric for regime identification in the atmosphere, improving regime-aware parameterizations, and informing aerosol interventions such as fog dispersion, rainfall enhancement, and albedo modification.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Cracked Film Lithography with CuGaO x Buffers for Bifacial CdTe Photovoltaics

Abstract Bifacial CdTe solar cells with greater power density than the monofacial baselines are demonstrated by using a CuGaO x rear interface buffer that passivates while reducing sheet resistance and contact resistance. Inserting CuGaO x between the CdTe and Au increases mean power density from 18.0 ± 0.5 to 19.8 ± 0.4 mW cm −2 for one sun front illumination. However, coupling CuGaO x with a transparent conductive oxide leads to an electrical barrier. Instead, CuGaO x is integrated with cracked film lithography (CFL)‐patterned metal grids. CFL grid wires are spaced narrowly enough (≈10 µm) to alleviate semiconductor resistance while retaining enough passivation and transmittance for a bifacial power gain: bifacial CuGaO x /CFL grids generate 19.1 ± 0.6 mW cm −2 for 1 sun front + 0.08 sun rear illumination and 20.0 ± 0.6 mW cm −2 at 1 sun front + 0.52 sun rear—the highest reported power density at field albedo conditions for a scaled polycrystalline absorber.

14 SOLAR ENERGY↗
DOE OSTI2023

Understanding and Advancing Bifacial Thin Film Solar Cells under Dual Illumination

There is a great deal of interest in increasing the energy yield from thin film solar cells by implementing bifacial operation. However, deleterious band bending and high interface recombination at the back transparent electrode can cause problems. Herein, it is investigated how bifacial thin film devices perform when illuminated through the front, back, and simultaneously through both interfaces using numerical modeling. It is shown that the downward band bending near the back interface is reduced during illumination when the carrier concentration is low. This effect is not found when the doping is relatively high, but the minority carrier distribution is still modified. Under either condition, the power generated under bifacial illumination exceeds the sum of the power generated when the illumination is solely from the back or the front. It is also shown that the back-illuminated device performance is independent of the angle at which the light enters the back of the device, which provides accommodation for scattered light. Finally, the power enhancement is calculated for bifacial devices relative to front-illuminated devices, and is shown that any significant loss in frontside power generation is difficult to overcome with back illumination under real-world albedo conditions.

CdTe↗
DOE OSTI2022

Detailing cloud property feedbacks with a regime-based decomposition

Here, we report diagnosing the root causes of cloud feedback in climate models and reasons for inter-model disagreement is a necessary first step in understanding their wide variation in climate sensitivities. Here we bring together two analysis techniques that illuminate complementary aspects of cloud feedback. The first quantifies feedbacks from changes in cloud amount, altitude, and optical depth, while the second separates feedbacks due to cloud property changes within specific cloud regimes from those due to regime occurrence frequency changes. We find that in the global mean, shortwave cloud feedback averaged across ten models comes solely from a positive within-regime cloud amount feedback countered slightly by a negative within-regime optical depth feedback. These within-regime feedbacks are highly uniform: In nearly all regimes, locations, and models, cloud amount decreases and cloud albedo increases with warming. In contrast, global-mean across-regime components vary widely across models but are very small on average. This component, however, is dominant in setting the geographic structure of the shortwave cloud feedback: Thicker, more extensive cloud types increase at the expense of thinner, less extensive cloud types in the extratropics, and vice versa at low latitudes. The prominent negative extratropical optical depth feedback has contributions from both within- and across-regime components, suggesting that thermodynamic processes affecting cloud properties as well as dynamical processes that favor thicker cloud regimes are important. The feedback breakdown presented herein may provide additional targets for observational constraints by isolating cloud property feedbacks within specific regimes without the obfuscating effects of changing dynamics that may differ across timescales.

58 GEOSCIENCES↗
DOE OSTI2021

Solar position confounds the relationship between ecosystem function and vegetation indices derived from solar and photosynthetically active radiation fluxes

Vegetation indices derived from solar and photosynthetically active radiation (PAR) sensors (i.e. radiation derived) have been under-utilized in inferring ecosystem function, despite measurement capability at hundreds of sites. This under-utilization may be attributed to reported mismatches among the seasonality of radiation- and satellite-derived vegetation indices and canopy photosynthesis; herein referred to as measurement biases. In this work, biases in radiation derived reflectance and vegetation indices were assessed using a decadal record of satellite and ground based spectroradiometer data, ecosystem phenology and CO 2 fluxes, and radiation derived vegetation indices (i.e. the Normalized Difference Vegetation Index [NDVI], the two band Enhanced Vegetation Index [EVI2]) from a high latitude tundra site (i.e. Imnaviat). At Imnaviat, we found poor correspondence between the three types of reflectance and vegetation indices, especially during the latter part of the growing season. Radiation derived vegetation indices resulted in incorrect estimates of phenological timing of up to a month and poor relationships with canopy photosynthesis (i.e. Gross Ecosystem Exchange (GEE)). These mismatches were attributed to solar position (i.e. solar zenith and azimuth angle) and a method, based on the diel visible and near-infrared albedo variation, was developed to improve the performance of the vegetation indices. The ability of radiation derived vegetation indices to infer GEE and phenological dates drastically improved once radiation derived vegetation indices were corrected for solar position associated biases at Imnaviat. Moreover, radiation derived vegetation indices became better aligned with MODerate resolution Imaging Spectroradiometer (MODIS) satellite estimates after solar position associated biases were corrected at Imnaviat and at 25 Fluxnet sites (~90 site years) across North America. Corrections developed here provide a way forward in understanding daily ecosystem function or filling large gaps in eddy covariance data at a significant number of Fluxnet sites.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Aerosols consistently suppress the convective boundary layer development

Aerosols with different vertical distribution and various optical properties induce diverse heating rates and thereby affecting convective boundary layer (CBL) development. Our results showed consistent CBL-suppression of aerosols during daytime with numerical experiments, in which aerosols were specified at different heights with synthesized single scattering albedo from 64 studies and asymmetry factor from 20 studies globally. Absorbing aerosols concentrated below but close to the CBL top had the strongest suppression effect on CBL development relative to that concentrated near surface or above CBL. Aerosol cooling effect by attenuating incident solar radiation and surface heat flux exceeded its warming effect by reheating the atmosphere layer with absorbed shortwave radiation, and eventually declined net heating rate, which inhibited CBL development, lowered mixed-layer potential temperature and stabilized atmospheric stratification. Stove effect of absorbing aerosols (CBL enhancement) under a zero background aerosol extinction coefficient is negligible for dominant dome effect (CBL suppression) which consistently suppresses CBL development regardless of aerosol vertical height and background aerosol extinction coefficient. Our study also highlighted the importance of specifying background aerosol extinction coefficient in numerical experiments for accurate assessment of aerosol radiative forcing and CBL-aerosol interactions.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Long-range transported North American wildfire aerosols observed in marine boundary layer of eastern North Atlantic

Wildfire is a major source of biomass burning aerosols, which greatly impact Earth climate. Tree species in North America (NA) boreal forests can support high-intensity crown fires, resulting in elevated injection height and longer lifetime (on the order of months) of the wildfire aerosols. Given the long lifetime, the properties of aged NA wildfire aerosols are required to understand and quantify their effects on radiation and climate. Here we present comprehensive characterization of climatically relevant properties, including optical properties and cloud condensation nuclei (CCN) activities of aged NA wildfire aerosols, emitted from the record-breaking Canadian wildfires in August 2017. Despite the extreme injection height of ~12 km, some of the wildfire plumes descended into the marine boundary layer in the eastern North Atlantic over a period of ~2 weeks, owing to the dry intrusions behind mid-latitude cyclones. The aged wildfire aerosols have high single scattering albedos at 529 nm (ω 529 ; 0.92–0.95) while low absorption Ångström exponents (Å abs ) at 464 nm/648 nm (0.7–0.9). In comparison, Å abs of fresh/slightly aged ones are typically 1.4–3.5. This low Å abs 529 and low Å abs ~110 nm diameter) with thick non-absorbing coatings. The accelerated descent of the wildfire plume also led to strong increase of CCN concentration at the supersaturation levels representative of marine low clouds. The hygroscopicity parameter, κ CCN , of the aged wildfire aerosols varies from 0.2 to 0.4, substantially lower than that of background marine boundary layer aerosols. However, the high fraction of particles with large diameter (i.e., within accumulation size ranges, ~100–250 nm) compensates for the low values of κ, and as a result, the aged NA wildfire aerosols contribute more efficiently to CCN population. These results provide direct evidence that the long-range transported NA wildfires can strongly influence CCN concentration in remote marine boundary layer, therefore the radiative properties of marine low clouds. Given the expected increases of NA wildfire intensity and frequency and regular occurrence of dry intrusion following mid-latitude cyclones, the influence of NA wildfire aerosols on CCN and clouds in remote marine environment need to be further examined.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Origin and composition of three heterolithic boulder- and cobble-bearing deposits overlying the Murray and Stimson formations, Gale Crater, Mars

Heterolithic, boulder-containing, pebble-strewn surfaces occur along the lower slopes of Aeolis Mons (“Mt. Sharp”) in Gale crater, Mars. They were observed in HiRISE images acquired from orbit prior to the landing of the Curiosity rover. The rover was used to investigate three of these units named Blackfoot, Brandberg, and Bimbe between sols 1099 and 1410. These unconsolidated units overlie the lower Murray formation that forms the base of Mt. Sharp, and consist of pebbles, cobbles and boulders. Blackfoot also overlies portions of the Stimson formation, which consists of eolian sandstone that is understood to significantly postdate the dominantly lacustrine deposition of the Murray formation. Blackfoot is elliptical in shape (62 x 26 m), while Brandberg is nearly circular (50 x 55 m), and Bimbe is irregular in shape, covering about ten times the area of the other two. The largest boulders are 1.5–2.5 m in size and are interpreted to be sandstones. As seen from orbit, some boulders are light-toned and others are dark-toned. Rover-based observations show that both have the same gray appearance from the ground and their apparently different albedos in orbital observations result from relatively flat skyfacing surfaces. Chemical observations show that two clasts of fine sandstone at Bimbe have similar compositions and morphologies to nine ChemCam targets observed early in the mission, near Yellowknife Bay, including the Bathurst Inlet outcrop, and to at least one target (Pyramid Hills, Sol 692) and possibly a cap rock unit just north of Hidden Valley, locations that are several kilometers apart in distance and tens of meters in elevation. These findings may suggest the earlier existence of draping strata, like the Stimson formation, that would have overlain the current surface from Bimbe to Yellowknife Bay. Compositionally these extinct strata could be related to the Siccar Point group to which the Stimson formation belongs.

58 GEOSCIENCES↗
DOE OSTI2020

Understanding Asteroid 16 Psyche’s composition through 3D impact crater modeling

Asteroid 16 Psyche is the largest M-type (metallic) Main Belt Asteroid (MBA). Radar albedo data indicate Psyche’s surface is rich in metallic content, but estimates for Psyche’s bulk structure vary widely, with bulk density estimates ranging from 1.4 ± 0.3 g/cm 3 to 4.5 ± 1.4 g/cm 3 and porosity estimates ranging from 30% to 70%. A forthcoming NASA discovery mission will visit Psyche. Narrowing the range of estimated compositions of Psyche prior to mission launch can help to determine the necessary tools for asteroid analysis. Psyche has two large impact structures in its Southern hemisphere, with estimated diameters from 50 km to 70 km and estimated depths up to 6.4 km. In this work, we present results from 2D and 3D hydrocode simulations of the largest of these impact structures. Through quantitative comparison of the simulated crater dimensions with measured values, our models suggest that Psyche is largely composed of porous, metallic material. In addition, to match the crater dimensions, our simulations indicate that the angle of impact was significantly altered from vertical by 45–60 degrees.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

Evaluation of methods for characterizing the fine particulate matter emissions from aircraft and other diffusion flame combustion aerosol sources

The U. S. Environmental Protection Agency in collaboration with the U. S. Air Force Arnold Engineering Development Complex conducted the VAriable Response In Aircraft nvPM Testing (VARIAnT) 3 and 4 test campaigns to compare nvPM emissions measurements from a variety of diffusion flame combustion aerosol sources (DFCASs), including a Cummins diesel engine, a diesel powered generator, two gas turbine start carts, a J85-GE-5 turbojet engine burning multiple fuels, and a Mini-CAST soot generator. The VARIAnT research program has conducted four test campaigns to date with the VARIAnT 3 and 4 test campaigns focusing on BC mass instrument performance, use of gas turbine engine sources for BC mass instrument calibration, and the characterization of the aerosols produced from the combustion sources. Results from both campaigns revealed agreement of about 20% between the AVL Micro-Soot Sensor, the Cavity Attenuated Phase Shift (CAPS PMSSA) monitor and the thermal-optical reference method for elemental carbon (EC), independent of the calibration source used. For the Artium LII-300, the measured mass concentrations in VARIAnT3 fall within 18% and in VARIAnT4 fall within 32% of the reference EC mass concentration when calibrated on a combustor rig in VARIAnT3 and on a LGT-60 start cart in VARIAnT4, respectively. It was also found that the three mass instrument types (MSS, CAPS PMSSA, and LII-300) can exhibit different BC to reference EC ratios depending on the emission source that appear to correlate to particle geometric mean mobility diameter, morphology, or some other parameter associated with particle geometric mean diameter (GMD) with the LII-300 showing a slightly stronger apparent trend with GMD. Systematic differences in LII-300 measured mass concentrations have been reduced by calibrating with a turbine combustion source (combustor or turbine engine). With respect to the particle size measurements made, the sizing instruments (TSI SMPS, TSI EEPS, and Cambustion DMS 500) were found to be in general agreement in terms of size distributions and concentrations with some exceptions. Teflon filter measurements of the total aerosol mass produced by the various DFCASs differed from the reference EC, BC, and integrated particle sized distribution measured aerosol masses. The Teflon filter measured mass was 30 to 40% greater than the reference EC and 50 to 60% greater than the BC mass for the J85 in both test campaigns. The measurements of particle size distributions and single particle analysis by miniSPLAT indicated the presence of large particles (>100 nm) having more compact morphologies, higher effective density, and a composition dominated by OC and ash. This increased large particle fraction is also associated with higher values of single scattering albedo measured by the CAPS PMSSA instrument and higher OC/EC measurements. These measurements indicate gas turbine engine emissions can be a more heterogeneous mix of particle types beyond the original E31 assumption that it is mainly composed of black carbon.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2026

Conceptual design study of neutron detectors for safeguards measurement of an irradiated pebble

Nuclear material control and accounting (MC&A) of pebble-bed reactors (PBRs) is challenging because a PBR utilizes hundreds of thousands of identical, unmarked pebbles that are continuously recirculated through the core. To develop tools that enable the implementation of international safeguards, especially in the context of MC&A of spent pebbles, we designed and simulated three neutron detection concepts to determine fissile content in individual pebbles: a differential die-away (DDA) detector, a californium interrogation prompt neutron (CIPN) detector, and a passive neutron albedo reactivity (PNAR) detector using Monte Carlo calculations. Burnup calculations were performed on the spent pebbles from the PBMR-400 classic PBR. The varying neutron and gamma source terms, and isotopic compositions in the spent pebbles calculated at various burnup levels were used in the neutron detector models. DDA was found to be sensitive to the number of passes a pebble has had through the core and to the fissile content contained in a spent pebble. Optimization in the DDA design further increased the neutron count rates and thus reduced counting uncertainty. Meanwhile, passive neutron counting using the same detector body could distinguish pebbles with different numbers of passes, but its response was dominated by neutron-emitting actinides and was not sensitive to fissile content. On the other hand, the PNAR technique was not viable for a single pebble but performed reasonably for a 27-pebble array, which suggested potential use for verification measurements of containers filled with 27 or more spent pebbles.

CIPN↗
DOE OSTI2019

The small-angle neutron scattering extension in MCNPX and the SANS cross section for nanodiamonds

Detonation nanodiamonds provide an intriguing prospect for the development of a very cold neutron (VCN) source or as a high albedo material for VCN reflection helping to control leakage of cold and very cold neutrons in a moderator. The investigation of source and reflector designs necessitates the development of new simulation tools for existing Monte Carlo codes that include small angle neutron scattering (SANS). The SANS extension in MCNPX 2.7 provides an analytical model of hard-sphere scattering with variable scattering particle sizes, size distributions, and packing fractions in order to supplement currently existing scattering kernels as well as the capability to read an experimentally determined small angle neutron scattering profile from a data file. The SANS extension is discussed and compared to nanodiamond SANS measurements.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2024

Simulations of divertor designs that spatially separate power and particle exhaust using mid-leg divertor particle pumping

Predictive design modeling of a Dissipation-Focused Divertor for future operation in DIII-D reveals that increasing the poloidal distance of the pump duct entrance from the target surface along the low-field side divertor baffle increases neutral compression and modifies the spatial distribution of power dissipation. With a divertor pump located mid-leg between the target and the X-point, SOLPS-ITER boundary plasma simulations without drifts predict the formation of a dense neutral cloud near the target with > 30x higher neutral compression in detachment, a more stable detachment front located further from the target, and ~25% lower outer midplane separatrix density required for detachment onset, compared to a pump located in the scrape-off layer at the target surface. Up to 19 MW of power flowing into the divertors is modeled using the following two numerical implementations for particle pumping: a specified fraction of particles incident on variable wall sections of the plasma grid is removed from the computational domain (so-called albedo pumping), and a pump duct is modeled which includes dynamics of kinetic neutrals in the duct. The simulations show that the detachment front is located between the divertor target and the X-point and is relatively stable near the pump entrance, without a strong dependence on gas puff rate or injected power. The mid-leg pump design spatially separates the two primary functions of a divertor (power handling and particle exhaust), with the majority of power dissipation occurring near the target plate and particle exhaust taking place further upstream. The benefit of enhanced dissipation using mid-leg pumping comes at the cost of a higher outer midplane separatrix density for a given amount of particle injection.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Comparison of total emitted solar-induced chlorophyll fluorescence (SIF) and top-of-canopy (TOC) SIF in estimating photosynthesis

We report many studies have shown that solar-induced fluorescence (SIF) has a good potential to predict gross primary production (GPP) of vegetation. What we measured by remote sensing or near-surface platforms is top-of-canopy (TOC) SIF (SIF toc ), which is not necessarily equal or proportional to total emitted SIF (SIF tot ) from the entire canopy due to the (re)absorption and scattering effects. However, photosynthesis, the process that plants use to fix carbon from the atmosphere, occurs at the entire vertical canopy. Here, by using the recollision theory, we calculated SIF tot at 760 nm from the measured SIF toc , hyperspectral reflectance (R), canopy interception (i) and leaf albedo (ω l ). Among them, both SIF toc and R can be obtained from concurrent TOC spectral measurements; i and ω l in the near-infrared region can be estimated from the open access datasets with a good accuracy. Our result confirms that the measured SIF toc only accounts for a small fraction of SIF tot : the above-the-canopy sensor can only “see” on average 22.9% of SIF tot at Harvard Forest. SIF tot has the following advantages over SIF toc in estimating GPP: (1) SIF tot improves the diurnal estimate of canopy GPP, especially capable to capture the midday depression of photosynthesis which may cause the large discrepancies between SIF toc and GPP on a diurnal basis, (2) SIF tot produces a stronger correlation with GPP from plants with complex canopy structure or under sky conditions with more diffuse irradiance, and (3) the SIF tot -GPP relationship shows a stronger resilience to environmental stresses. The fluorescence escape ratio (f esc ), the ratio between SIF toc multiplied by π and SIF tot , is mostly determined by the sun-canopy-sensor geometry and leaf inclination distribution. The effect of LAI and the leaf chlorophyll concentration on f esc is marginal at the 760 nm wavelength. Our results suggest that converting SIF toc into SIF tot provides a better tool to understand and estimate GPP.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

NASA's surface biology and geology designated observable: A perspective on surface imaging algorithms

The 2017-2027 National Academies' Decadal Survey, Thriving on Our Changing Planet, recommended Surface Biology and Geology (SBG) as a "Designated Targeted Observable" (DO). The SBG DO is based on the need for capabilities to acquire global, high spatial resolution, visible to shortwave infrared (VSWIR; 380 - 2500 nm; ~30 m pixel resolution) hyperspectral (imaging spectroscopy) and multispectral midwave and thermal infrared (MWIR: 3-5 µm; TIR: 8-12 µm; ~60 m pixel resolution) measurements with sub-monthly temporal revisits over terrestrial, freshwater, and coastal marine habitats. To address the various mission design needs, an SBG Algorithms Working Group of multidisciplinary researchers has been formed to review and evaluate the algorithms applicable to the SBG DO across a wide range of Earth science disciplines, including terrestrial and aquatic ecology, atmospheric science, geology, and hydrology. Here, we summarize current state-of-the-practice VSWIR and TIR algorithms that use airborne or orbital spectral imaging observations to address the SBG DO priorities identified by the Decadal Survey: (i) terrestrial vegetation physiology, functional traits, and health; (ii) inland and coastal aquatic ecosystems physiology, functional traits, and health; (iii) snow and ice accumulation, melting, and albedo; (iv) active surface composition (eruptions, landslides, evolving landscapes, hazard risks); (v) effects of changing land use on surface energy, water, momentum, and carbon fluxes; and (vi) managing agriculture, natural habitats, water use/quality, and urban development. We review existing algorithms in the following categories: snow/ice, aquatic environments, geology, and terrestrial vegetation, and summarize the community-state-of-practice in each category. Finally, this effort synthesizes the findings of more than 130 scientists.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Comparing the cooling effectiveness of operationalisable urban surface combination scenarios for summer heat mitigation

Extreme summer heat in cities exacerbates the vulnerability of urban communities to heatwaves. Vegetative and reflective urban surfaces can help reduce urban heat. This study investigated the impacts of urban trees, green roofs and cool roofs on heat mitigation during average and extreme summer conditions in temperate oceanic Melbourne, Australia. We simulated the city climate using ‘The Air Pollution Model’ (TAPM) at a 1 km spatial resolution over 10 years, which according to our review of the literature, was the most prolonged period for simulation in Melbourne. During a widespread heatwave event, some of the tested scenarios with combined surface parameters could reduce the extreme values of the energy budget components- sensible heat, latent heat, and storage heat fluxes up to seasonal averages compared to the existing situation for Melbourne (control). The scenario with the highest (reasonable maximum) ground-level vegetation, green roofs, and cool roofs could reduce air temperatures up to 2.4 °C. The simulations suggest that a combined strategy with vegetative and high-albedo surfaces will deliver higher effectiveness with maximum cooling benefits and cost-effectiveness than individual strategies in cities. These results suggest the importance of collaborative strategic planning of urban surfaces to make cities healthier, sustainable, and liveable.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Identification of surface urban heat versus cool islands for arid cities depends on the choice of urban and rural definitions

The urban heat island (UHI) effect in arid cities can be small or even negative, the latter known as the urban cool island (UCI) effect. Differences in defining urban and rural areas can introduce uncertainties in detecting UHI or UCI, especially when the UHI signal is small. Here, we compared the surface UHI intensity (SUHII) estimated by a dozen different methods (with multiple urban and/or rural definitions) across 104 arid cities globally, providing a comprehensive evaluation of the uncertainty in SUHII estimates. Results show that the absolute difference in annual average SUHII (ΔSUHII) among methods exceeded 1°C in about half of the arid cities during both daytime and nighttime. Further, the overall annual mean ΔSUHII for all arid cities was 1.35°C during daytime and 1.03 °C at night. The uncertainty arising from simultaneous variations in urban and rural definitions was generally higher than that resulting from their individual changes. It was observed that, with varying definitions of urban and rural areas, nearly 50% of arid cities experienced a sign reversal in daytime SUHII estimates, while approximately 15% exhibited a sign reversal in nighttime SUHII. Variations in urban-rural differences in surface properties, such as vegetation index and albedo, due to differing urban and rural definitions, contributed strongly to the observed SUHII uncertainties. Overall, our results offer new insights into the ongoing debate on heat and cold islands in arid cities, emphasizing a critical need to standardize SUHII estimation frameworks.

54 ENVIRONMENTAL SCIENCES↗