Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “AWARD”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,639 records · Page 91

Final Report on “Influence of nucleation on ice microphysical properties of mixed-phase stratiform clouds”

This is a final report based on tasks supported by the Atmospheric System Research program (DOE Office of Biological and Environmental Research), DOE Award Number DE-SC0011690. This project has been focused on the following objectives: 1. Laboratory studies of immersion and contact nucleation of ice; 2. Investigation of the influence of time-dependence of ice nucleation on microphysical properties of Arctic and other thin, mixed-phase stratiform clouds; and 3. Theoretical and modeling studies of the conditions necessary for producing large droplets in clouds that can help initiate the collision—coalescence process.

54 ENVIRONMENTAL SCIENCES↗

Board on Earth Sciences and Resources and Its Activities Final Technical Report

The National Academies of Sciences, Engineering, and Medicine’s Board on Earth Sciences and Resources (BESR) is the locus for earth science activities, including critical aspects of energy science, for the institution and provides independent, unbiased, scientific and engineering advice to the nation on a broad range of earth science issues and in response to requests and needs expressed by Congress, federal and state agencies, the science community, the private sector, and others. The core level support provided by the Department of Energy’s Basic Energy Sciences was essential to allow BESR to maintain its service to the nation as a privileged interface between the government and the earth science community and to support scientific and engineering advances related to earth sciences and engineering, including basic energy science. This technical report outlines the volunteer board membership, primary activities, products, impacts, and work in development by the Board during the award period. Primarily, the Board served as a forum for advancing the understanding and communication of earth sciences and resource topics related to the geosciences and energy resource engineering and science; developed and oversaw a range of consensus studies, workshops, and other convening activities related to the earth sciences; over saw the Board’s five standing committees; and continued to develop a communication and outreach approach to provide information to federal and state government, the private sector, academia, non-governmental organizations, and the public to support policy and decision making.

02 PETROLEUM↗

RBDMS, FracFocus, and Gateway Initiatives for FY15/16

Award DE-FE-0000880 from the Department of Energy to the Ground Water Protection Council (GWPC) focuses on state and federal priorities in the areas of state RBDMS development, connectivity between state systems and FracFocus.org, and data sharing initiatives across agencies. The overarching goals of these projects are to: upgrade the Risk Based Data Management System (RBDMS) to a web based application; upgrade the RBDMS user interface to make it more intuitive and easier to use increase connectivity between state RBDMS systems and FracFocus; provide outreach to states and agencies through training programs, special meetings, and state by state outreach on all deliverables; provide greater functionality for non-IT users; update and install RBDMS modules in additional state programs (IL, CA, WY, WV); and; help make data access more transparent. The primary objective is to enhance the Risk Based Data Management System (RBDMS) by adding new components relevant to current environmental topics such as hydraulic fracturing, increasing field inspection capabilities, creating linkages between FracFocus and state programs, upgrading eForm capabilities, and analyzing potential for data sharing. The GWPC will work with state agencies to develop an RBDMS module(s) that meets these needs.

02 PETROLEUM↗

Integrated Testing of a Membrane CO 2 Capture Process with a Coal-Fired Boiler

This final technical report describes work conducted by Membrane Technology and Research, Inc. (MTR) for the Department of Energy, National Energy Technology Laboratory (DOE NETL) to demonstrate integrated operation of the MTR small pilot membrane CO 2 capture system with Babcock & Wilcox Enterprises, Inc.’s (B&W) Small Boiler Simulator-II (SBS-II) pilot coal boiler (award number DE-FE0026414). The work was performed from July 1, 2015 through March 31, 2018. The overall goal of this project was to operate the existing MTR small pilot membrane CO 2 capture system at an appropriately-sized coal-fired boiler to test integrated operation with CO 2 recycle to the boiler. MTR was assisted in this project by B&W, which hosted the integrated membrane-boiler field test at the B&W Research Facility in Barberton, OH. This report details the work performed to prepare the B&W site, modify the existing MTR membrane system, install the MTR system at B&W, and operate an integrated membrane-boiler field test with CO 2 recycle to the boiler. Detailed analysis of the integrated membrane-boiler test data was conducted to validate prior B&W computational fluid dynamics (CFD) modeling and SBS-II boiler tests with CO 2 -laden air that showed modest effects of recycled CO 2 on boiler performance. The integrated test results also demonstrated how various membrane parameters impact the performance of a dynamic boiler system. Key results for all tasks and recommendations for future research are discussed in this report.

20 FOSSIL-FUELED POWER PLANTS↗

RFA for Solar/Geothermal Hybrid Thermal Energy Storage Modeling: Cooperative Research and Development Final Report, CRADA Number CRD-16-646

Hyperlight Energy is an innovative concentrated solar power (CSP) company whose business charter is to commercialize a disruptively low-cost, CSP collector system that is ultimately for providing heat for solar thermal/geothermal hybrid power plants, process heat applications (e.g., enhanced oil recovery), and solar thermal power generation. Hyperlight's CSP collector system utilizes a linear Fresnel reflector (LFR) configuration. This LFR configuration consists of mirrors mounted in low-cost, precision plastic extrusions, which are integrated into raft assemblies and floated on low-cost, sealed waterbeds. Hyperlight's CSP collector technology has been developed under private equity investment, government grant and commercial funding. Hyperlight has been awarded a 1.5-million DOE COLLECTS contract with an additional 1.6 million in matched funds from private investment and the California Energy Commission. This DOE project will support the final steps of product development for bulk commercialization and deployment of the Hyperlight CSP collector system. The work will culminate in a final operational deployment at a commercially relevant site. Several such site options are currently under evaluation, including two geothermal sites. Hyperlight identified a very low-cost way to put renewable energy electrons on the grid at peak times, upgrading underutilized geothermal plants with Hyperlight's low cost CSP and thermal energy storage (TES). While Hyperlight's CSP collector work is maturing quickly for commercial pilot launch, an optimal TES system for solar thermal/geothermal hybridization needs to be evaluated and ultimately developed so Hyperlight can develop commercial retrofit projects at a scale of hundreds of megawatts of renewable energy power output at sites across the United States, followed by greenfield projects in a multi-GW sized market.

15 GEOTHERMAL ENERGY↗

Low-noise, radiation tolerant SiCpms

Over the last 10 years, our R&D effort has resulted in a steady progress on improving Geiger detector array technology performance, verifying their reliability and developing three cell layout libraries containing more than 2200 primitive cells for Si and SiC Geiger based single-photon detectors and silicon ROIC array fabrication. Awards from DOE, NASA and DOD, as wells as commercial R&D orders supported much progress, relevant to this program. The expertise gained and the technologies developed or qualified during these programs provided the design database and expertise to carry out the development of this new SiC photomultiplier (SiCpm) technology, successful fabrication of SiCpm detectors, and evaluation of their radiation hardness. After irradiation with protons and neutrons at 1015cm-2 and 1014cm-2 respectively, SiCpms proved radiation hardness, exceeding the expected radiation tolerance The defects induced by irradiation were mainly point defects. A new improved DLTS method (fDLTS – full wave DLTS) hardware and data processing software specific to investigating radiation damage in SiC was developed. Further work is needed to better characterize and control defects induced by charged particles. We recommend further funding of radiation hardened technology development and validation; qualification of device-specific characterization methods like f-DLTS, development of more methods to evaluate defects in SiC, more active involvement of the national labs in evaluating the SiCpm devices, and DOE support of technology transfer to a qualified foundry.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

New Ideas for the Dark Sector and the Early Universe

This is the final technical report for US Department of Energy (HEP) Award DE-SC0017804, PI Justin Khoury (University of Pennsylvania). Project goals were twofold: to develop a novel framework for dark matter based on the rich physics of superfluidity and, to seek deeper understanding of the symmetries and associated Ward identities underlying inflation.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Configuration Management History Report for the RH LLW Disposal Facility Project

This document outlines and summarized the configuration management process that was used for the RHLLW Disposal Facility design and turnover to operations in support of process readiness reviews. The project was originally solicited as a design-build-operate contract, but awarded as a design-build project only to Areva Federal Services in 2014. The RHLLW requirements were captured in two documents: 1) SPC-1437, Design-Build-Operate Performance Specification for the Remote-Handled Low-Level Waste Disposal Project; and 2) TFR-483, Technical and Functional Requirements for the Remote-Handled Low-Level Waste Disposal Project. TFR-483 and SPC-1437 outlined the requirements for the facility and SPC-1437 documented additional requirements regarding quality, design, and construction. A Code of Record (COR) was generated during conceptual design and updated during final design to document the design-basis codes and standards (INL/EXT-10-20044).

42 ENGINEERING↗

Nuclear Science User Facility: Overview of Neutron Irradiation Activities

The Nuclear Science User Facilities (NSUF), established in 2007 as the Advanced Test Reactor (ATR) National Scientific User Facility is chartered to provide cost-free access to unique and important research and development capabilities and infrastructure to nuclear energy-focused researchers. Users can apply for access to any of the NSUF INL or partner facilities using the same process, either through the annual Office of Nuclear Energy Consolidated Innovative Nuclear Research funding announcement or the NSUF Rapid Turnaround Experiment (RTE) opportunities, offered three times each year. The NSUF has several research and test reactors available as well as ion beamlines and x-ray light sources for experimental use in support of the R&D objectives of the DOE Office of Nuclear Energy. This presentation reviews the current capabilities, needs, awarded irradiation experiments and potential use in FY 2018.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Improvement of Design Codes to Account for Accident Thermal Effects on Seismic Performance

This report summarizes the results of experimental and numerical studies conducted to evaluate the effect of accident thermal loads on the seismic response of steel-plate composite (SC) walls and reinforced concrete (RC) walls and beams. The research was sponsored by U.S. Department of Energy through the Nuclear Energy University Program (NEUP), Award Number DE-NE0008256. Summary and conclusions of the research conducted are presented in this report. Based on the observations, analysis and design recommendations for SC and RC structures are also summarized

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Advanced QPSK Optical Modulators Using Lithium Niobate Thin Films (Final Scientific Report)

Lithium niobate thin film based optical modulator devices have been produced using this SBIR award. A bonding apparatus was developed that was used to bond lithium niobate to silicon at room temperature. The bonding apparatus was designed, assembled and qualified for production of thin film substrates. The optical properties of ion sliced thin films produced using this bonding apparatus was optimized to achieve low loss optical waveguides. Optical grating coupler and other component of the proposed optical modulator were designed. Preliminary results show the proposed method for making optical modulator meets the required customer specifications. All the required process steps for manufacturing of the devices were developed and optimized. Further funding is required to make a final prototype device that can be provided to customers.

36 MATERIALS SCIENCE↗

Low-GWP HVAC System with Ultra-small Centrifugal Compression

Mechanical Solutions, Incorporated (MSI) was awarded a contract from the United States Department of Energy under Contract DE-EE0007042 to advance the potential of vapor compression utilizing an advanced high speed centrifugal compressor with an advanced heat exchanger design. The design was mandated to maintain high efficiency while utilizing a low GWP refrigerant. The specific goal of this program was to develop an advanced 5 ton air conditioning system. The target of the air conditioner is residential and commercial. To accomplish these goals, MSI teamed with Lennox International, a leading air conditioning manufacturer. MSI would design, oversee manufacturing, assemble, and test the compressor, while Lennox designed the heat exchanger and tested the overall air conditioner. Lennox initiated the project with a detailed cycle analysis that examined systems and refrigerants. At various break points, MSI performed a preliminary compressor design to identify realizable targets. Initially, the refrigerant that was targeted was R1234ze(E), but this was subsequently rejected over concerns of flammability. R515a was ultimately accepted as a qualified fluid based upon its GWP and flammability rating. MSI performed a complete design of the centrifugal compressor based upon the cycle system design and analysis. The design was based upon advanced aerodynamics utilizing transient Computational Fluid Dynamics (CFD), as well as mechanical and rotordynamic analysis. A detailed materials investigation was conducted to ensure mechanical integrity and refrigerant compatibility. To achieve the high rotational speed required by the compressor (105,300 rpm), foil bearings were designed by MSI, as was a high speed motor to provide the required torque for the compressor. All elements of the design complied with Design for Manufacturing and Assembly (DFMA) principles. The compressor was manufactured in components, utilizing specializing subcontractors throughout the country. The components were assembled into an operational compressor in MSI’s Albany facility, where it was tested in the MSI refrigeration test loop. The compressor achieved 90% of its maximum speed during testing at MSI. The interaction between the inverter and the high speed motor was the reason that full speed could not be attained. The compressor operated smoothly and quietly at all speeds, with the bearings performing as expected. The compressor was then shipped to Lennox’s facilities in Texas, where it was tested in the entire air conditioning system. Lennox was able to achieve 95% of the maximum rotational speed. They employed the same inverter as MSI. Lennox compiled the results of the testing and based upon the results, a go forward plan has been developed to correct the issues with the inverter, as well as redesign some parts that proved to be a challenge during the program. The consensus of the team is that a fully functional air conditioning system can be developed to achieve all of the goals identified in this program.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

American Chemical Society Federal Funders Event

This award has enabled the chemical community to meet with federal funders (DOE, NSF, NIH, AFOSR, DOD, etc.) and private funders (ACS-PRF, Dreyfus Foundation, Agilent Technologies, etc.) to talk about possible funding opportunities at the frontiers of chemistry. It has also allowed investigators to network on collaborative projects.

99 GENERAL AND MISCELLANEOUS↗

Advanced Gasification and Novel Transformational Coal Conversion Technologies Development: Final Technical Report

This report summarizes the work carried out in furtherance of the NETL/DOE award, OTM-Enhanced Coal Syngas for Carbon Capture Power Systems and Fuel Synthesis Applications. The overall objective of the project was to further develop Oxygen Transport Membrane (OTM) technology and assess the potential for integration in coal power generation. OTM technology has the potential to enhance the quality of syngas produced by coal gasifiers, reduce the amount of cryogenic-derived oxygen required in Integrated Gasification Combined Cycle (IGCC) power plants, and allow for coal and natural gas integration. Process simulations and techno-economic analyses were carried out to estimate the cost and performance of OTM enhanced IGCC plants, IG-NGCC plants, and OTM enhanced Fischer Tropsch (FT) Liquids from coal and natural gas plants. The OTM enhanced power plants achieved higher carbon capture rates, higher efficiencies, and lower cost of electricity compared to the base cases. The most significant benefits were achieved for cases which used low rank coal as the feed. Fischer-Tropsch coal to liquids plants with iron-based catalysts and natural gas integration utilizing OTM technology showed improved carbon conversion, improved thermal efficiency and lower cost of production. With respect to OTM core technology development, significant advances have been made in several areas. The development and implementation of a third-generation membrane materials and manufacturing process has resulted in the availability of robust and reliable, high performance membranes, that can be manufactured at high yield. Progress towards the goal of higher pressure operation has been demonstrated with the development of improved metal-ceramic seals and components of the panel array module that integrate membrane-seal assemblies with primary and secondary reforming catalysts have been further developed and demonstrated. Work concluded with the successful start-up and operation of a multi-panel pilot-scale system which is the final step in technology development ahead of demonstration.

20 FOSSIL-FUELED POWER PLANTS↗

Yakutat Tlingit Tribe Energy Conservation Upgrades & Energy Efficiency Measures

The Yakutat Tlingit Tribe (YTT) was awarded Strategic Technical Assistance Response Team (START) assistance from the Department of Energy (DOE) Office of Indian Energy Policy and Programs (OIEPP) in 2014. The intent of the grant was to lower energy consumption at both facilities (Kwaan Plaza which houses the medical clinic and the Community Center which housed the Tribe’s 477 Social Welfare Programs) and to explore technology to provide electricity and heat to the Kwaan Plaza.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Gluonic Excitations in Mesons

This award provided support for the Massachusetts Institute of Technology (MIT) to work on the GlueX experiment at Jefferson Lab (JLab). The MIT-GlueX group played a leading role in the development of an upgraded particle-identification system and in employing data-driven methods for calibrating GlueX data. In addition, our group focused on advancing the usage of machine learning algorithms and other state-of-the-art data science tools within the domain of nuclear physics research.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗