Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ASPECT RATIO”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,639 records · Page 91

QCD equation of state to O ( μ B 6 ) from lattice QCD

We calculated the QCD equation of state using Taylor expansions that include contributions from up to sixth order in the baryon, strangeness and electric charge chemical potentials. Calculations have been performed with the Highly Improved Staggered Quark action in the temperature range T ϵ [135 MeV , 330 MeV] using up to four different sets of lattice cutoffs corresponding to lattices of size N$3\atop{σ}$ × N τ with aspect ratio N σ /N τ = 4 and N τ = 6-16 . The strange quark mass is tuned to its physical value, and we use two strange to light quark mass ratios m s /m l = 20 and 27, which in the continuum limit correspond to a pion mass of about 160 and 140 MeV, respectively. Sixth-order results for Taylor expansion coefficients are used to estimate truncation errors of the fourth-order expansion. We show that truncation errors are small for baryon chemical potentials less then twice the temperature (μ B ≤ 2T). The fourth-order equation of state thus is suitable for the modeling of dense matter created in heavy ion collisions with center-of-mass energies down to √sNN ~ 12 GeV . We provide a parametrization of basic thermodynamic quantities that can be readily used in hydrodynamic simulation codes. The results on up to sixth-order expansion coefficients of bulk thermodynamics are used for the calculation of lines of constant pressure, energy and entropy densities in the T - μ B plane and are compared with the crossover line for the QCD chiral transition as well as with experimental results on freeze-out parameters in heavy ion collisions. These coefficients also provide estimates for the location of a possible critical point. We argue that results on sixth-order expansion coefficients disfavor the existence of a critical point in the QCD phase diagram for μ B /T≤2 and T/T c (μ B = 0) > 0.9 .

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Jamming and tiling in fragmentation of rectangles

We investigate a stochastic process where a rectangle breaks into smaller rectangles through a series of horizontal and vertical fragmentation events. We focus on the case where both the vertical size and the horizontal size of a rectangle are discrete variables. Because of this constraint, the system reaches a jammed state where all rectangles are sticks, that is, rectangles with minimal width. Sticks are frozen as they cannot break any further. The average number of sticks in the jammed state, S , grows as S ≃ A /√2π ln A with rectangle area A in the large-area limit, and remarkably, this behavior is independent of the aspect ratio. The distribution of stick length has a power-law tail, and further, its moments are characterized by a nonlinear spectrum of scaling exponents. Here, we also study an asymmetric breakage process where vertical and horizontal fragmentation events are realized with different probabilities. In this case, there is a phase transition between a weakly asymmetric phase where the length distribution is independent of system size and a strongly asymmetric phase where this distribution depends on system size.

97 MATHEMATICS AND COMPUTING↗

Applications of a Rayleigh-Taylor model to direct-drive laser fusion

Here, this paper presents a simple physics-based model for the interpretation of key metrics in laser direct drive. The only input parameters required are target scale, in-flight aspect ratio, and beam-to-target radius, and the importance of each has been quantified with a tailored set of cryogenic implosion experiments. These analyses lead to compact and accurate predictions of the fusion yield and areal density as a function of hydrodynamic stability, and suggest new ways to take advantage of direct drive. To provide examples, we will discuss how the inferred mix width behaves relative to theory, then show how it could be exploited to perform a direct drive implosion with a Lawson metric or Χ no α of 0.24 ± 0.02—using a novel parameter space at high velocities and beam radii on the OMEGA laser—that projects to ignition at a laser energy ≤2.0 MJ.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Competition between roughness and strength for scale-dependent surfaces

Rocks famously have scale-dependent strength, yet the actual dependence is notoriously hard to measure or incorporate into any theoretical framework. Natural rough surfaces present an opportunity to solve the problem. Surfaces sliding in shear evolve as protrusions collide. These asperities can deform or break, thus creating a new surface shape. In particular, natural surfaces have roughness at all scales as well as scale-dependent strength. Based on a scaling analysis, we have previously suggested that the scale-dependent aspect ratio of steady-state surfaces should be proportional to the scale-dependent shear strain at yield. If true, scale-dependent strength could easily be inferred from natural surfaces. Thus, moving beyond the scaling argument to a rigorous treatment of scale-dependent strength for multiscale rough surfaces in shear is important. However, analytic frameworks for analyzing multiscale problems are challenging, as conventional continuum mechanics typically involves a single value for a material property across scales. Here, in this work, we build on the formalism of Persson (2001) that presents a method to compute contact area for rough surfaces with a prescribed topographic spectrum using a stochastic differential equation. The Persson formalism allows for plastic yield under normal loading of otherwise elastic materials and leaves open the possibility of scale-dependent yield stress. In this study, we pursue this route to develop a theory and numerical results for the yielding of a rough, elastoplastic surface with scale-dependent yield stress. Here, we examine surfaces for which the power spectrum of the topography 𝐶 and yield stress 𝑌 follow power laws as a function of scale 𝜆, such that 𝐶∼𝜆 −𝑚 and 𝑌∼𝜆 −𝑛 , respectively. In this formal treatment of the problem, we focus on surfaces in contact and the resulting yield and do not impose shear. Numerical solutions show that the deviation from the elastic scaling solution is bounded as expected by the prior 1D heuristic scaling argument that anticipates the Hurst exponent as 1−𝑛. We also show that the plasticity is expected to erode the contacts if 𝑚 is lower than 𝑛−3, which corresponds to a Hurst exponent lower than 1−𝑛/2. This result is rigorously sound for 2D, i.e., realistic surfaces, and quantitatively different than the prior scaling argument. The theory now permits a correspondingly quantitative approach to interpreting natural surfaces.

elasticity↗

Theory of kinetic arrest, elasticity, and yielding in dense binary mixtures of rods and spheres

We extend the quiescent and stressed versions of naïve mode coupling theory to treat the dynamical arrest, shear modulus, and absolute yielding of particle mixtures where one or more species is a nonrotating nonspherical object. The theory is applied in detail to dense isotropic “chemically matched” mixtures of variable aspect ratio rods and spheres that interact via repulsive and short range attractive site-site pair potentials. A remarkably rich ideal kinetic arrest behavior is predicted with up to eight “dynamical phases” emerging: an ergodic fluid, partially localized states where the spheres remain fluid but the rods can be a gel, repulsive glass or attractive glass, doubly localized glasses and gels, a porous rod gel plus sphere glass, and a narrow window where a type of rod glass and gel localization coexist. Dynamical complexity increases with rod length and the introduction of attractive forces between all species which both enhance gel network formation. Multiple dynamic reentrant features and triple points are predicted, and each dynamic phase has unique particle localization characteristics and mechanical properties. Orders of magnitude variation of the linear shear modulus and absolute yield stress are found as rod length, mixture composition and the detailed nature of interparticle attractions are varied. The interplay of total (high) mixture packing fraction and composition at fixed temperature is also briefly studied. The present work provides a foundation to study more complex rod-sphere mixtures of both biological and synthetic interest that include physical features such as interaction site size asymmetry, rod-sphere specific attractions, and/or Coulomb repulsion.

36 MATERIALS SCIENCE↗

Self-assembly of a drop pattern from a two-dimensional grid of nanometric metallic filaments

We report experiments, modeling, and numerical simulations of the self–assembly of particle patterns obtained from a nanometric metallic square grid. Initially, nickel filaments of rectangular cross section are patterned on a SiO 2 flat surface, and then they are melted by laser irradiation with ~18-ns pulses. During this time, the liquefied metal dewets the substrate, leading to a linear array of drops along each side of the squares. The experimental data provide a series of SEM images of the resultant morphology as a function of the number of laser pulses or cumulative liquid lifetime. These data are analyzed in terms of fluid mechanical models that account for mass conservation and consider flow evolution with the aim to predict the final number of drops resulting from each side of the square. The aspect ratio, δ, between the square sides' lengths and their widths is an essential parameter of the problem. Our models allow us to predict the δ intervals within which a certain final number of drops are expected. The comparison with experimental data shows a good agreement with the model that explicitly considers the Stokes flow developed in the filaments neck region that lead to breakup points. Furthermore, numerical simulations that solve the Navier-Stokes equations along with slip boundary condition at the contact lines are implemented to describe the dynamics of the problem.

42 ENGINEERING↗

Relativistic-electron-driven magnetic reconnection in the laboratory

Magnetic reconnection is a fundamental process occurring in many plasma systems. Magnetic field lines break and reconfigure in to a lower energy state, converting released magnetic field energy into plasma kinetic energy. Around some of the universe’s most energetic objects, such as gamma ray burst or active galactic nuclei, where the magnetic field energy exceeds the plasma rest mass energy, the most extreme magnetic reconnection in the relativistic regime is theorized. The pre- sented experiments and three-dimensional particle-in-cell modeling recreate in the laboratory the scaled plasma conditions necessary to access the relativistic electron regime and therefore approach conditions around these distant, inaccessible objects. High-power, ultrashort laser pulses focused to high-intensity (I > 2.5 × 1018 Wcm-2) on solid targets produces relativistic temperature electrons within the focal volume. The hot electrons are largely confined to the target surface and form a ra- dial surface current that generates a huge, expanding azimuthal magnetic field. Focusing two laser pulses in close proximity on the target surface leads to oppositely directed magnetic fields being driven together. The fast electron motion due to the magnetic reconnection is inferred using an ex- perimental x-ray imaging technique. The x-ray images enable the measurement of the reconnection layer dimensions and temporal duration. The reconnection rates implied from the aspect ratio of the reconnection layer, δ/L ≈ 0.3, was found to be consistent over a range of experimental pulse durations (40 fs–20 ps) and agreed with the modeling. Further experimental evidence for magnetic reconnection is the formation of a nonthermal electron population shown by the modeling to be accelerated in the reconnection layer.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Device design and flow scaling for liquid sheet jets

We present a design and experimental study of microfluidic converging nozzles which creates a stable liquid sheet jet. The sheet jets formed by the nozzles can be varied between order 10 μm to submicron thicknesses (a measured minimum thickness of 560 nm). A parametric study of the jet structure was performed here including 51-fold variation of Reynolds number, 20-fold variation of Weber number, 89-fold variation of capillary number, and 12-fold variation of nozzle exit aspect ratio. These studies benefited from variation of working liquids, nozzle geometry, 10-fold variation of flow rate, and 7.1-fold variation of key length scales. Navier-Stokes simulations of internal fluid flow were also performed to identify key physical phenomena. These studies were used to propose and test physical scaling theories for jet thickness, length, and width of the primary sheet. The scaling theories are also informed by classic studies of colliding jets with similar flow structures. For sheet thickness, we present two scaling approaches: one relying on internal fluid flow calculations and the other based solely on nozzle geometry. For sheet length and width, scaling theories are presented based on the nozzle geometry and essential dimensionless flow parameters. The scalings do not require numerical simulation of external flow and exhibit efficient collapse across the parameter space. Together, the fabrication method and scaling theories provide a clear path to the rapid and efficient design of liquid sheet jets.

36 MATERIALS SCIENCE↗

Rayleigh-Darcy convection with hydrodynamic dispersion

We investigate the effect of hydrodynamic dispersion on convection in porous media by performing direct numerical simulations (DNS) in a two-dimensional Rayleigh-Darcy domain. Scaling analysis of the governing equations shows that the dynamics of this system are not only controlled by the classical Rayleigh-Darcy number based on molecular diffusion, Ra m , and the domain aspect ratio, but also controlled by two other dimensionless parameters: the dispersive Rayleigh number Ra d =H/α t and the dispersivity ratio r=α l /α t , where H is the domain height and αt and αl are the transverse and longitudinal dispersivities, respectively. For Δ=Ra d /Ra m >O(1), the influence from the mechanical dispersion is minor; for Δ≲0.02, however, the flow pattern is determined by Rad while the convective flux is F~c(Ra d )Ra m for large Ram. Our DNS results also show that the increase of mechanical dispersion, i.e., decreasing Rad, will coarsen the convective pattern by increasing the plume spacing. Moreover, the inherent anisotropy of mechanical dispersion breaks the columnar structure of the megaplumes at large Ra m , if Ra d <5000. This results in a fan-flow geometry that reduces the convective flux.

42 ENGINEERING↗

Resolution-induced anisotropy in large-eddy simulations

Large-eddy simulation (LES) of turbulence in complex geometries and domains is often conducted with high-aspect-ratio resolution cells of varying shapes and orientations. The effects of such anisotropic resolution are often simplified or neglected in subgrid model formulations. In this study, we examine resolution-induced anisotropy and demonstrate that even for isotropic turbulence, anisotropic resolution induces mild resolved Reynolds stress anisotropy and significant anisotropy in second-order resolved velocity gradient statistics. In large-eddy simulations of homogeneous isotropic turbulence with anisotropic resolution, it is shown that commonly used subgrid models, including those that consider resolution anisotropy in their formulation, perform poorly. The one exception is the anisotropic minimum dissipation model proposed by Rozema et al. [Phys. Fluids 27, 085107 (2015)]. A simple model is presented here that is an anisotropic eddy diffusivity extension of the “Kolmogorov expression” eddy viscosity of Carati et al. [A family of dynamic models for large-eddy simulation, in Annual Research Briefs, Center for Turbulence Research (Stanford University and NASA AMES, 1995), pp. 35–40] that depends explicitly on the anisotropy of the resolution. It also performs well and is remarkable because, unlike other LES subgrid models, the eddy diffusivity only depends on statistical characteristics of the turbulence (in this case, the dissipation rate), not on fluctuating quantities. In other subgrid modeling formulations, such as the dynamic procedure, limiting flow dependence to statistical quantities in this way could have advantages.

42 ENGINEERING↗

Life cycle of streaks in the buffer layer of wall-bounded turbulence

In this work, streaks in the buffer layer of wall-bounded turbulence are tracked in time to study their life cycle. Spatially and temporally resolved direct numerical simulation data are used to analyze the strong wall-parallel movements conditioned to low-speed streamwise flow. The analysis of the streaks shows that there is a clear distinction between wall-attached and detached streaks, and that the wall-attached streaks can be further categorized into streaks that are contained in the buffer layer and the ones that reach the outer region. The results reveal that streaks are born in the buffer layer, coalescing with each other to create larger streaks that are still attached to the wall. Once the streak becomes large enough, it starts to meander due to the large streamwise-to-wall-normal aspect ratio, and consequently the elongation in the streamwise direction, which makes it more difficult for the streak to be oriented strictly in the streamwise direction. While the continuous interaction of the streaks allows the superstructure to span extremely long temporal and length scales, individual streak components are relatively small and short-lived. Tall-attached streaks eventually split into wall-attached and wall-detached components. These wall-detached streaks have a strong wall-normal velocity away from the wall, similar to ejections or bursts observed in the literature. Conditionally averaging the flow fields to these split events show that the detached streak has not only a larger wall-normal velocity compared to the wall-attached counterpart, it also has a larger (less negative) streamwise velocity, similar to the velocity field at the tip of a vortex cluster.

42 ENGINEERING↗

Transition from wall modes to multimodality in liquid gallium magnetoconvection

Coupled laboratory-numerical experiments of Rayleigh-Bénard convection in liquid gallium subject to a vertical magnetic field are presented. The experiments are carried out in two cylindrical containers with diameter-to-height aspect ratio Γ = 1.0 and 2.0 at varying thermal forcing (Rayleigh numbers 10 5 ≲ Ra ≲ 10 8 ) and magnetic field strength (Chandrasekhar numbers 0 ≲ Ch ≲ 3 × 10 5 ). Laboratory measurements and numerical simulations confirm that magnetoconvection in our finite cylindrical tanks onsets via nondrifting wall-attached modes, in good agreement with asymptotic predictions for a semi-infinite domain. With increasing supercriticality, the experimental and numerical thermal measurements and the numerical velocity data reveal transitions between wall mode states with different azimuthal mode numbers and between wall-dominated convection to wall and interior multimodality. These transitions are also reflected in the heat transfer data, which combined with previous studies connect onset to supercritical turbulent behaviors in liquid metal magnetoconvection over a large parameter space. The gross heat transfer behaviors between magnetoconvection and rotating convection in liquid metals are compared and discussed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Measuring scale-dependent shape anisotropy by coarse-graining: Application to inhomogeneous Rayleigh-Taylor turbulence

Here, we generalize the “filtering spectrum” to probe scales along different directions by spatial coarse-graining. This multidimensional filtering spectrum quantifies the spectral content of flows that are not necessarily homogeneous. From multidimensional spectral information, we propose a simple metric for shape anisotropy at various scales. The method is applied to simulations of two-dimensional (2D) and 3D Rayleigh-Taylor (RT) turbulence, which is inhomogeneous and anisotropic. We show that 3D RT has clear shape anisotropy at large scales with approximately 4:3 vertical to horizontal aspect ratio but tends toward isotropy at small scales as expected. In sharp contrast, we find that RT in 2D simulations, which are still the main modeling framework for many applications, is isotropic at large scales and its shape anisotropy increases at smaller scales where structures tend to be horizontally elongated. While this may be surprising, it is consistent with recent results that large-scale isotropy in 2D RT is due to the generation of a large-scale overturning circulation via an upscale cascade, while small-scale anisotropy is due to the stable stratification resultant from such overturning and the inefficient mixing in 2D.

42 ENGINEERING↗

Wall modes and the transition to bulk convection in rotating Rayleigh-Bénard convection

We investigate states of rapidly rotating Rayleigh-Bénard convection in a cylindrical cell over a range of Rayleigh numbers 3 × 10 5 ≤ Ra ≤ 5 × 10 9 and Ekman numbers 10 − 6 ≤ Ek ≤ 10 − 4 for Prandtl number Pr = 0.8 and aspect ratios 1 / 5 ≤ Γ ≤ 5 using direct numerical simulations. We characterize, for perfectly insulating sidewall boundary conditions, the first transition to convection via wall mode instability and the nonlinear growth and instability of the resulting wall mode states, including a secondary transition to time dependence. We show how the radial structure of the vertical velocity u z and the temperature T is captured well by the linear eigenfunctions of the wall mode instability where the radial width of u z is δ u z ∼ Ek 1 / 3 r / H whereas δ T ∼ e − k r ( k is the wave number of a laterally infinite wall mode state). The disparity in spatial scales for Ek = 10 − 6 means that the heat transport is dominated by the radial structure of u z since T varies slowly over the radial scale δ u z . We further describe how the transition to a state of bulk convection is influenced by the presence of the wall mode states. We use temporal and spatial scales as measures of the local state of convection and the Nusselt number Nu as representative of global transport. Our results elucidate the evolution of the wall state of rotating convection and confirm that wall modes are strongly linked with the boundary zonal flow being the robust remnant of nonlinear wall mode states. We also show how the heat transport ( Nu ) contributions of wall modes and bulk modes are related and discuss approaches to disentangling their relative contributions. Published by the American Physical Society 2024

58 GEOSCIENCES↗

Scaling of Magnetic Reconnection in Relativistic Collisionless Pair Plasmas

Using fully kinetic simulations, we study the scaling of the inflow speed of collisionless magnetic reconnection from the non-relativistic to ultra-relativistic limit. In the anti-parallel configuration, the inflow speed increases with the upstream magnetization parameter σ and approaches the light speed when σ>O(100), leading to an enhanced reconnection rate. In all regimes, the divergence of pressure tensor is the dominant term responsible for breaking the frozen-in condition at the x-line. The observed scaling agrees well with a simple model that accounts for the Lorentz contraction of the plasma passing through the diffusion region. The results demonstrate that the aspect ratio of the diffusion region remains ~0.1 in both the non-relativistic and relativistic limits.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Laboratory observation of resistive electron tearing in a two-fluid reconnecting current sheet

The spontaneous formation of plasmoids via the resistive electron tearing of a reconnecting current sheet is observed in the laboratory. These experiments are performed during driven, antiparallel reconnection in the two-fluid regime within the Magnetic Reconnection Experiment. It is found that plasmoids are present even at a very low Lundquist number, and the number of plasmoids scales with both the current sheet aspect ratio and the Lundquist number. Furthermore, the reconnection electric field increases when plasmoids are formed, leading to an enhanced reconnection rate.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Counterpropagating Radiative Shock Experiments on the Orion Laser

We present new experiments to study the formation of radiative shocks and the interaction between two counterpropagating radiative shocks. The experiments are performed at the Orion laser facility, which is used to drive shocks in xenon inside large aspect ratio gas cells. The collision between the two shocks and their respective radiative precursors, combined with the formation of inherently three-dimensional shocks, provides a novel platform particularly suited for the benchmarking of numerical codes. The dynamics of the shocks before and after the collision are investigated using point-projection x-ray backlighting while, simultaneously, the electron density in the radiative precursor was measured via optical laser interferometry. Modeling of the experiments using the 2D radiation hydrodynamic codes nym and petra shows very good agreement with the experimental results.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Pseudoelasticity at Large Strains in Au Nanocrystals

Pseudoelasticity in metals is normally associated with phase transformations (e.g., shape memory alloys) but has recently been observed in sub-10 nm Ag nanocrystals that rapidly recovered their original shape after deformation to large strains. The discovery of pseudoelasticity in nanoscale metals dramatically changes the current understanding of the properties of solids at the smallest length scales, and the motion of atoms at surfaces. However, it remains unclear whether pseudoelasticity exists in different metals and nanocrystal sizes. The challenge of observing deformation at atomistic to nanometer length scales has prevented a clear mechanistic understanding of nanoscale pseudoelasticity, although surface diffusion and dislocation-mediated processes have been proposed. We further the understanding of pseudoelasticity in nanoscale metals by using a diamond anvil cell to compress colloidal Au nanocrystals under quasihydrostatic and nonhydrostatic pressure conditions. Nanocrystal structural changes are measured using optical spectroscopy and transmission electron microscopy and modeled using electrodynamic theory. Here, we reveal that 3.9 nm Au nanocrystals exhibit pseudoelastic shape recovery after deformation to large uniaxial strains of up to 20%, which is equivalent to an ellipsoid with an aspect ratio of 2. Nanocrystal absorbance efficiency does not recover after deformation, which suggests that crystalline defects may be trapped in the nanocrystals after deformation.

36 MATERIALS SCIENCE↗