Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ARSENIC”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,639 records · Page 91

Graphitized carbon on GaAs(100) substrates

We report on the formation of graphitized carbon on GaAs(100) surfaces by molecular beam epitaxy. We grew highly carbon-doped GaAs on AlAs, which was then thermally etched in situ leaving behind carbon atoms on the surface. After thermal etching, Raman spectra revealed characteristic phonon modes for sp{sup 2}-bonded carbon, consistent with the formation of graphitic crystallites. We estimate that the graphitic crystallites are 1.5-3 nm in size and demonstrate that crystallite domain size can be increased through the use of higher etch temperatures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magnetization reversal processes of epitaxial Fe{sub 3}Si films on GaAs(001)

We report magneto-optical Kerr microscopy study of the magnetic reversal behavior of Fe{sub 3}Si/GaAs(100) epitaxial thin films grown by molecular beam epitaxy. Results are described in the context of superconducting quantum interference device and Kerr effect vector magnetometry to study the magnetic switching behavior. By tuning the Fe concentration of the samples from 75% to 83%, we found that the ratio of uniaxial to cubic anisotropy constants {gamma} (=|K{sub u}/K{sub 1}|) would tremendously vary from 0.06 to 0.3. When the field was applied along the easy axis of Fe{sub 3}Si samples, a step feature was observed in the M-H loops. This feature has been resolved in the domain image by Kerr microscopy, in which we observed a two-switching behavior at the field where the step feature occurred. These can be qualitatively understood by considering the ratio {gamma}.

36 MATERIALS SCIENCE↗

Spin dynamics and magnetic anisotropies at the Fe/GaAs(001) interface

20Au/(d)Fe/GaAs(001) structures were deposited using molecular beam epitaxy, where Fe thickness d = (5...90) atomic layers. Interface anisotropies were investigated using the in-plane angular dependence of ferromagnetic resonance (FMR). Intrinsic and extrinsic contributions to magnetic damping were investigated using FMR linewidth ({Delta}H) measurements at 9, 24, 36, and 72 GHz (in-plane configuration) and 9, 24, and 36 GHz (perpendicular configuration). The in-plane cubic and uniaxial perpendicular anisotropies were well described by the bulk and interface contributions indicating that the Fe films have a high lattice coherence and high critical Curie temperature T{sub c}. The in-plane uniaxial anisotropy is more complex and will be discussed in detail. The frequency dependence of {Delta}H(f) was analyzed using the Gilbert damping, two magnon scattering, and long range magnetic inhomogeneity contributions. The thickness dependence of the Gilbert damping parameter {alpha} was found to be well described by the bulk and interface terms.

36 MATERIALS SCIENCE↗

Influence of Au capping layer on the magnetic properties of ultrathin epitaxial Fe{sub 3}O{sub 4}/GaAs(001) film

The effect of the Au capping layer on the magnetic anisotropies and molecular magnetic moment of ultrathin epitaxial Fe{sub 3}O{sub 4} films on GaAs(100) substrate was studied by MO Kerr effect, superconducting quantum interference device, and Ferromagnetic resonance, respectively. The films with and without capping layers show a predominant in-plane uniaxial magnetic anisotropy and a minor fourfold anisotropy. The Au capping layer was found to increase significantly the uniaxial magnetic anisotropy related to the magnetoelastic interactions at the Au/Fe{sub 3}O{sub 4} interface, and unexpectedly reduce saturation molecular magnetization due to the interfacial diffusion between Au layer and Fe{sub 3}O{sub 4} layer.

36 MATERIALS SCIENCE↗

N site ordering effect on partially ordered Fe{sub 16}N{sub 2}

Partially ordered Fe{sub 16}N{sub 2} thin films have been fabricated on Fe (001)-buffered GaAs (001) single-crystal substrates by a facing target sputtering process. The saturation magnetization has been systematically investigated as a function of N site ordering in partially ordered Fe{sub 16}N{sub 2} thin films, which is found to be increased monotonically with the increase in the N site ordering parameter, reaching up to 2.68 T at high ordering case. A model discussion is provided based on the partial localization of 3d electron states in this material system, which successfully rationalizes the formation of the giant saturation magnetization in chemically ordered Fe{sub 16}N{sub 2}. We further demonstrate that the average magnetic moment of partially ordered Fe{sub 16}N{sub 2} sensitively depends on the special arrangement of Fe{sub 6}N clusters, which is the key to realize high magnetic moment in this material system.

36 MATERIALS SCIENCE↗

In situ strain relaxation comparison between GaAsBi and GaInAs grown by molecular-beam epitaxy

The strain relaxation of GaAsBi is studied in order to determine both the maximum thickness before dislocations form for various misfits and the potential of GaAsBi for usage in the compositionally graded buffer of lattice-mismatched devices. Low-misfit GaAsBi epilayers are grown and compared with GaInAs, a well-studied material currently used in compositional grades. Relaxation behavior and dislocation energetics are compared using in situ wafer curvature. Samples are grown using molecular-beam epitaxy under similar conditions with misfit up to -0.81%. GaAsBi begins to relax at a lower thickness than GaInAs of the same mismatch. This leads to the majority of GaAsBi strain relaxation occurring with less material growth than comparable GaInAs. However, GaAsBi has greater residual strain than GaInAs after 2 {mu}m of growth. These results indicate that GaAsBi requires less elastic energy to form dislocations and more elastic energy to either encourage glide or multiply dislocations than GaInAs. GaAsBi shows less surface roughness than GaInAs for all samples, ruling out roughness as a source of dislocations and hindered glide in these alloys.

36 MATERIALS SCIENCE↗

Surface segregation effects of erbium in GaAs growth and their implications for optical devices containing ErAs nanostructures

We report on the integration of semimetallic ErAs nanoparticles with high optical quality GaAs-based semiconductors, grown by molecular beam epitaxy. Secondary ion mass spectrometry and photoluminescence measurements provide evidence of surface segregation and incorporation of erbium into layers grown with the erbium cell hot, despite the closed erbium source shutter. We establish the existence of a critical areal density of the surface erbium layer, below which the formation of ErAs precipitates is suppressed. Based upon these findings, we demonstrate a method for overgrowing ErAs nanoparticles with III-V layers of high optical quality, using subsurface ErAs nanoparticles as a sink to deplete the surface erbium concentration. This approach provides a path toward realizing optical devices based on plasmonic effects in an epitaxially-compatible semimetal/semiconductor system.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Epitaxial high saturation magnetization FeN thin films on Fe(001) seeded GaAs(001) single crystal wafer using facing target sputterings

It was demonstrated that Fe-N martensite ({alpha}') films were grown epitaxially on Fe(001) seeded GaAs(001) single crystal wafer by using a facing target sputtering method. X-ray diffraction pattern implies an increasing c lattice constant as the N concentration increases in the films. Partially ordered Fe{sub 16}N{sub 2} films were synthesized after in situ post-annealing the as-sputtered samples with pure Fe{sub 8}N phase. Multiple characterization techniques including XRD, XRR, TEM, and AES were used to determine the sample structure. The saturation magnetization of films with pure Fe{sub 8}N phase measured by VSM was evaluated in the range of 2.0-2.2 T. The post annealed films show systematic and dramatic increase on the saturation magnetization, which possess an average value of 2.6 T. These observations support the existence of giant saturation magnetization in {alpha}''-Fe{sub 16}N{sub 2} phase that is consistent with a recent proposed cluster-atom model and the first principles calculation [N. Ji, X. Q. Liu, and J. P. Wang, New J. Phys. 12 063032 (2010)].

36 MATERIALS SCIENCE↗

Raman scattering in InAs/AlGaAs quantum dot nanostructures

We report on Raman scattering experiments on InAs/Al{sub x}Ga{sub 1-x}As quantum dot heterostructures with 0{<=}x{<=}0.6. The samples were prepared by using molecular beam epitaxy (MBE) and atomic layer MBE for the growth of different layers. For x>0, we detected several lines originating from the Al{sub x}Ga{sub 1-x}As alloy. These can be related to scattering from GaAs-like and AlAs-like phonons with q congruent with 0, and weaker scattering from disorder-activated phonons with q{ne}0. In particular, we identified a line at {approx}250 cm{sup -1} as due to disorder-activated longitudinal optical phonons in the alloy. This conclusion is different than the attribution of this line to scattering from dots and, consequently, we do not recognize the possibility of deriving any information about the actual composition of the dots from an analysis of this line as proposed by other authors.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Absence of vapor-liquid-solid growth during molecular beam epitaxy of self-induced InAs nanowires on Si

The growth mechanism of self-induced InAs nanowires (NWs) grown on Si (111) by molecular beam epitaxy was investigated by in situ reflection high energy electron diffraction and ex situ scanning and transmission electron microscopy. Abrupt morphology transition and in-plane strain relaxation revealed that InAs NWs nucleate without any significant delay and under the absence of indium (In) droplets. These findings are independent of the As/In-flux ratio, revealing entirely linear vertical growth rate and nontapered NWs. No evidence of In droplets nor associated change in the NW apex morphology was observed for various growth termination procedures. These results highlight the absence of vapor-liquid-solid growth, providing substantial benefits for realization of atomically abrupt doping and composition profiles in future axial InAs-based NW heterostructures on Si.

36 MATERIALS SCIENCE↗

Direct exchange interaction of localized spins associated with unpaired sp electrons in Be-doped low-temperature-grown GaAs layers

Beryllium-doped GaAs layers grown at low temperatures by molecular-beam epitaxy contain localized spins associated with unpaired sp electrons of As{sub Ga}{sup +} ions. Interactions of these localized spins are investigated by measuring the magnetization with a superconducting quantum interference device and the peak-to-peak width of electron paramagnetic resonance (EPR) spectra for samples with different spin concentrations ranging from 3 x 10{sup 18} to 2.0 x 10{sup 19} cm{sup -3}. The results show that localized spins in this material antiferromagnetically interact on each other via direct exchange. From the analysis of the temperature dependence and field dependence of the magnetization on the basis of the Curie-Weiss law and the molecular-field approximation, exchange energy of each sample was derived. The dependence of the exchange energy on the concentration of localized spins is reasonably explained by a model of direct exchange, which results from the overlapping of wave functions of unpaired electrons at As{sub Ga}{sup +} ions. The peak-to-peak width of EPR spectra increases with an increase in the spin concentration at low temperatures, whereas it decreases with an increase in the temperature for samples with high spin concentrations. These EPR results also show that significant exchange interactions indeed occur between localized spins in this material. These effects of direct exchange interactions between localized spins can clearly be observed at their average distances of around 4 nm, which implies a considerably large spatial extension of the wave function of an unpaired sp electron around an As{sub Ga}{sup +} ion.

36 MATERIALS SCIENCE↗

Carrier tunneling effects on the temperature dependent photoluminescence of InAs/GaAs quantum dot: Simulation and experiment

Considering the direct quantum tunneling of carrier, we propose a new carrier rate equation model to simulate the temperature dependent photoluminescence (TDPL) of InAs/GaAs quantum dots (QDs). The TDPL showed abnormal variations: the peak rapid redshift, linewidth shrinkage, and thermal activation energy all decreased with increasing tunneling strength. A criterion, which could be used to evaluate the tunneling strength, has been developed. That is, smaller tunneling strength coefficient {alpha} indicates higher carrier tunneling strength. Meanwhile, the criterion is also demonstrated via comparative experimental results of InAs QDs grown on different patterned GaAs substrates. It is found that, to some extent, the tunneling strength would be enhanced by decreasing the dot-dot distance for closely arranged QDs ensembles.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Direct observation of N-(group V) bonding defects in dilute nitride semiconductors using hard x-ray photoelectron spectroscopy

Using bulk sensitive hard x-ray photoelectron spectroscopy, we directly observe a spectrum related to N-As bonding defects in (Ga,In)(N,As)/Ga(N,As) heterostructure. The defects are most likely attributed to split interstitials. Their concentration is in the order of 10{sup 19} cm{sup -3}, close to the detection limit of the measurement. Rapid thermal annealing eliminates the defects, leading to those undetectable. Similar phenomenon is observed for N-P bonding defects in In(N,P). The results indicate common features in dilute nitride semiconductor system: existence of N-(group V) bonding defects and their behavior on postgrowth annealing.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Transport and strain relaxation in wurtzite InAs-GaAs core-shell heterowires

Indium-arsenide-gallium-arsenide (InAs-GaAs) core-shell, wurtzite nanowires have been grown on GaAs (001) substrates. The core-shell geometries (core radii 11 to 26 nm, shell thickness >2.5 nm) exceeded equilibrium critical values for strain relaxation via dislocations, apparent from transmission electron microscopy. Partial axial relaxation is detected in all nanowires increasing exponentially with size, while radial strain relaxation is >90%, but undetected in nanowires with both smaller core radii <16 nm and shell thicknesses <5 nm. Electrical measurements on individual core-shell nanowires show that the resulting dislocations are correlated with reduced electron field-effect mobility compared to bare InAs nanowires.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of dislocation density on thermal boundary conductance across GaSb/GaAs interfaces

We report on the thermal boundary conductance across structurally-variant GaSb/GaAs interfaces characterized by different dislocations densities, as well as variably-rough Al/GaSb interfaces. The GaSb/GaAs structures are epitaxially grown using both interfacial misfit (IMF) and non-IMF techniques. We measure the thermal boundary conductance from 100 to 450 K with time-domain thermoreflectance. The thermal boundary conductance across the GaSb/GaAs interfaces decreases with increasing strain dislocation density. We develop a model for interfacial transport at structurally-variant interfaces in which phonon propagation and scattering parallels photon attenuation. We find that this model describes the measured thermal boundary conductances well.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Thermal stability of amorphous GaN{sub 1-x}As{sub x} alloys

GaN{sub 1-x}As{sub x} alloys grown across the composition range by low temperature molecular beam epitaxy have great technological potential for photovoltaic applications owing to their strong absorption coefficient and wide tunability of band gap and band edges. We found that amorphous GaN{sub 1-x}As{sub x} alloys that are formed for the compositions x, in the range of x{approx}0.3-0.7 are stable up to 700 deg. C. This is surprising since growth of GaN{sub 1-x}As{sub x} above 400 deg. C results in phase segregation. At annealing temperatures higher than 700 deg. C the alloy phase segregates into GaAs:N and GaN:As. The relative size of the nanocrystals depends on the initial film composition and annealing conditions.

36 MATERIALS SCIENCE↗

Strain balanced quantum posts

Quantum posts are assembled by epitaxial growth of closely spaced quantum dot layers, modulating the composition of a semiconductor alloy, typically InGaAs. In contrast with most self-assembled nanostructures, the height of quantum posts can be controlled with nanometer precision, up to a maximum value limited by the accumulated stress due to the lattice mismatch. Here, we present a strain compensation technique based on the controlled incorporation of phosphorous, which substantially increases the maximum attainable quantum post height. The luminescence from the resulting nanostructures presents giant linear polarization anisotropy.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

In Search of Energy Landscape for Network Glasses

Quick scanning extended x-ray absorption fine-structure spectroscopy is used to obtain in situ structural information on the real-time response of network glasses at the nanoscale level of atomic organization to the temperature ramp through the glass transition range. The results testify nonlinear, real-time temperature response indicative of nanoscale dynamic heterogeneity in disordered systems with intermediate fragility, related to the intermetabasin transitions within potential energy/enthalpy landscape.

36 MATERIALS SCIENCE↗