Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “turbulence methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,621 records · Page 90
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

Assessment of Edge-Based Viscous Method for Corner-Flow Solutions on Graphics Processing Units

A highly efficient, edge-based viscous (EBV) discretization method has been recently implemented in a practical, unstructured-grid, node-centered, finite-volume flow solver and evaluated for Reynolds-averaged Navier-Stokes (RANS) formulations. In comparison to a well-established cell-based viscous (CBV) method, the EBV method has demonstrated multifold acceleration of all viscous-kernel computations on general unstructured mixed-element grids. The viscous kernels include evaluation of viscous fluxes, diffusion terms in turbulence models, and the corresponding Jacobian terms. In this paper, an EBV implementation of a nonlinear extension of the Spalart-Allmaras turbulence model, SA-neg-QCR2000, is presented and verified. The SA-neg-QCR2000 model is used for simulating turbulent corner flows. Previously reported EBV computations have been conducted on traditional computing architectures based on central processing units (CPU). This paper assesses benefits of the EBV method on modern high-performance computing architectures based on graphics processing units (GPU). The GPU implementations of the CBV and EBV methods are verified by comparing solutions and iterative convergence with those observed in CPU computations on the same grids. A comprehensive assessment of the EBV speedup on CPU and GPU architectures is presented for established benchmark corner flows, namely, a supersonic flow through a long square duct and a subsonic flow around a NASA juncture flow model.

CFD↗
NASA NTRSDate not supplied

Assessment of Edge-Based Viscous Method for Corner-Flow Solutions on Graphics Processing Units

A highly efficient, edge-based viscous (EBV) discretization method has been recently implemented in a practical, unstructured-grid, node-centered, finite-volume flow solver and evaluated for Reynolds-averaged Navier-Stokes (RANS) formulations. In comparison to a well-established cell-based viscous (CBV) method, the EBV method has demonstrated multifold acceleration of all viscous-kernel computations on general unstructured mixed-element grids. The viscous kernels include evaluation of viscous fluxes, diffusion terms in turbulence models, and the corresponding Jacobian terms. In this paper, an EBV implementation of a nonlinear extension of the Spalart-Allmaras turbulence model, SA-neg-QCR2000, is presented and verified. The SA-neg-QCR2000 model is used for simulating turbulent corner flows. Previously reported EBV computations have been conducted on traditional computing architectures based on central processing units (CPU). This paper assesses benefits of the EBV method on modern high-performance computing architectures based on graphics processing units (GPU). The GPU implementations of the CBV and EBV methods are verified by comparing solutions and iterative convergence with those observed in CPU computations on the same grids. A comprehensive assessment of the EBV speedup on CPU and GPU architectures is presented for established benchmark corner flows, namely, a supersonic flow through a long square duct and a subsonic flow around a NASA juncture flow model.

CFD↗
DOE OSTI2025

Simulation Models for Exploring Magnetic Reconnection

Simulations have played a critical role in the advancement of our knowledge of magnetic reconnection. However, due to the inherently multiscale nature of reconnection, it is impossible to simulate all physics at all scales. For this reason, a wide range of simulation methods have been crafted to study particular aspects and consequences of magnetic reconnection. This article reviews many of these methods, laying out critical assumptions, numerical techniques, and giving examples of scientific results. Plasma models described include magnetohydrodynamics (MHD), Hall MHD, Hybrid, kinetic particle-in-cell (PIC), kinetic Vlasov, Fluid models with embedded PIC, Fluid models with direct feedback from energetic populations, and the Rice Convection Model (RCM).

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2025

Assessment of flamelet/progress variable methods for supersonic combustion

Tabulated chemistry models, including the flamelet/progress variable approach, have been successfully used for a variety of turbulent flame simulations. The progress variable describes the progress of reactions in a system and parameterizes a lookup table of thermochemical variables. This approach reduces the cost of simulations, transporting only one scalar (progress variable) instead of the many species mass fractions required for detailed chemistry. Originally developed for low Mach number flame simulations, recent works have focused on extensions of this approach to compressible flames, supersonic combustion, and detonations, with applications such as scramjet combustors and rotating detonation engines. Unlike low Mach simulations, compressible flow simulations require solving the energy transport equation, which is coupled to the equation of state. This leads to additional modeling challenges regarding the thermodynamics and its impact on the chemistry. The validity of modeling assumptions, for example the relationship between energy and temperature, also varies with the combustion regime. The present work provides a detailed assessment of the existing strategies for chemistry tabulation for compressible/supersonic combustion, including detonations. A priori analysis indicates that approximations which are reasonable for weakly compressible flames may break down for shock-induced combustion. Furthermore, the analysis identifies specific assumptions and approximations that do not hold for detonations, emphasizing that care must be taken when applying tabulated chemistry models outside their intended combustion regimes.

Detonations↗
DOE OSTI2021

Dissipative magnetohydrodynamics for nonresistive relativistic plasmas: An implicit second-order flux-conservative formulation with stiff relaxation

Based on a 14-moment closure for nonresistive (general-) relativistic viscous plasmas, here we describe a new numerical scheme that is able to handle all first-order dissipative effects (heat conduction, bulk and shear viscosities), as well the anisotropies induced by the presence of magnetic fields. The latter is parametrized in terms of a thermal gyrofrequency or, equivalently, a thermal Larmor radius and allows to correctly capture the thermal Hall effect. By solving an extended Israel-Stewart-like system for the dissipative quantities that enforces algebraic constraints via stiff-relaxation, we are able to cast all first-order dissipative terms in flux-divergence form. This allows us to apply traditional high-resolution shock capturing methods to the equations, making the system suitable for the numerical study of highly turbulent flows. We present several numerical tests to assess the robustness of our numerical scheme in flat spacetime. The 14-moment closure can seamlessly interpolate between the highly collisional limit found in neutron star mergers, and the highly anisotropic limit of relativistic Braginskii magnetohydrodynamics appropriate for weakly collisional plasmas in black-hole accretion problems. We believe that this new formulation and numerical scheme will be useful for a broad class of relativistic magnetized flows.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2024

Characterizing the effect of hypersonic boundary layer turbulence on antenna performance: A computational approach

The degradation of antenna performance during hypersonic re-entry is a well known phenomenon that can lead to complete radio blackout. Recent additions to the Empire code establish it as a tool for the study and analysis of the problem. Coupling to the Sandia Parallel Aerodynamics and Reentry Code (SPARC) enables the electromagnetic analysis of realistic re-entry plasma profiles. The geometric flexibility afforded by both Empire and SPARC allow the consideration of arbitrary vehicle and antenna configurations. We have used this tool to study antenna performance during re-entry when the boundary layer becomes turbulent. A concise description of line-of-sight transmissions, which employs advanced statistical methods, was developed. New insights into the low altitude reflectometer readings of RAM-C2 are offered. Techniques for the reconstruction of the re-entry plasma profile from reflectometer data were explored.

42 ENGINEERING↗
NASA NTRS1974

Analysis of dynamic stall using unsteady boundary-layer theory

The unsteady turbulent boundary layer and potential flow about a pitching airfoil are analyzed using numerical methods to determine the effect of pitch rate on the delay in forward movement of the rear flow reversal point. An explicit finite difference scheme is used to integrate the unsteady boundary layer equations, which are coupled at each instant of time to a fully unsteady and nonlinear potential flow analysis. A substantial delay in forward movement of the reversal point is demonstrated with increasing pitch rate, and it is shown that the delay results partly from the alleviation of the gradients in the potential flow, and partly from the effects of unsteadiness in the boundary layer itself. The predicted delay in flow-reversal onset, and its variation with pitch rate, are shown to be in reasonable agreement with experimental data relating to the delay in dynamic stall. From the comparisons it can be concluded (a) that the effects of time-dependence are sufficient to explain the failure of the boundary layer to separate during the dynamic overshoot, and (b) that there may be some link between forward movement of the reversal point and dynamic stall.

Scruggs, R. M.↗
NASA NTRS1974

Analysis of flow-reversal delay for a pitching airfoil

The coupled unsteady turbulent boundary layer and potential flow about a pitching airfoil are analyzed using numerical methods to determine the effect of pitch rate on the delay in forward movement of the rear flow reversal point. An explicit finite difference scheme is used to integrate the unsteady boundary layer equations, which are coupled at each instant of time to a fully unsteady and nonlinear potential flow analysis. A substantial delay in forward movement of the reversal point is demonstrated with increasing pitch rate, and it is shown that the delay results partly from the alleviation of the gradients in the potential flow, and partly from the effects of unsteadiness in the boundary layer itself.

Scruggs, R. M.↗
NASA NTRS1974

Theoretical studies on tone noise from a ducted fan rotor

The method of computing radiated noise from a ducted rotor due to inflow distortion and turbulence are examined. Analytical investigations include an appropriate description of sources, the cut-off conditions imposed on the modal propagation of the pressure waves in the annular duct, and reflections at the upstream end of the duct. Far field sound pressure levels at blade passing frequency due to acoustic radiation from a small scale low speed fan are computed. Theoretical predictions are in reasonable agreement with experimental measurements.

Rao, C. V. R.↗
NASA NTRS1975

Supercritical wing sections II: A handbook

The numerical aspect of theoretical work on transonics and supercritical wing sections are compiled. A model of the trailing edge is introduced which eliminates the loss of 15 to 20 percent experienced with heavily aft-loaded models, and it is indicated how drag creep can be reduced at off-design conditions. A rotated finite difference scheme is presented which can handle supersonic as well as subsonic free stream Mach numbers and leads to an effective three-dimensional program for the computation of transonic flow past an oblique wing. In the case of two-dimensional flow, the method is extended to take into account the displacement thickness computed by a semiempirical turbulent boundary layer correction. A series of supercritical wing sections is discussed together with comparisons between experimental and theoretical data. Computer programs and a brief manual for their operation are listed. It is shown that the programs furnish a physically adequate computer simulation of the compressible flows that arise in problems of transonic aerodynamics.

Bauer, F.↗
NASA NTRS1977

Modelling the effects of turbulence on acoustic wave propagation

A review of recent theoretical modeling of the effects of turbulence on acoustic wave propagation is presented. The Born approximation limit of the smoothing method of Keller and of the kinetic theory method of Howe are compared with the classical perturbation results of Chernov. Secular growth is observed in the higher order terms of the kinetic theory method of Howe when multiple scaling is ignored. The forward propagation - beam broadening model of Brown and Clifford is discussed as well as the single scatter model of DeLoach and of Rudd. Each model is examined with respect to its prediction of conservation of energy.

Harris, W. L.↗
NASA NTRS1977

Standardization of computational experiments in unsteady turbulent boundary-layer flow

Numerical experiments are proposed as standard cases to be computed by all who plan to analyze unsteady turbulent boundary layer behavior. In this way, differences between the results obtained by various methods can be compared in a completely defined environment. The test cases range in difficulty from time relaxation study of the steady flow on a flat plate to the analysis of unsteady reversed flow. Initial and boundary conditions are fully defined for each case and representative outputs are presented. It is recommended that tabulated samples of computations of these test cases be published in a compendium of results.

Carr, L. W.↗
NASA NTRS1979

Noise transmission - Turboprop problem

An analytical model is presented to predict low frequency (1000 Hz and below) noise transmission into aircraft. Noise transmission is determined by solving the acoustic wave equation for the interior noise field, the equivalent 'smeared' monocoque shell equation for overall fuselage vibrations and skin-stringer panel equation for local vibrations of panels and stringers. The solution to this system of equations is obtained by using a Galerkin-like procedure. The modes and frequencies for skin-stringer panels are determined by a transfer matrix method. Results include noise transmission through discretely stiffened panels and cabin noise due to turbulent boundary layer and propeller passage harmonics for a turboprop type aircraft.

Vaicaitis, R.↗
NASA NTRS1982

Atmospheric turbulence parameters for modeling wind turbine dynamics

A model which can be used to predict the response of wind turbines to atmospheric turbulence is given. The model was developed using linearized aerodynamics for a three-bladed rotor and accounts for three turbulent velocity components as well as velocity gradients across the rotor disk. Typical response power spectral densities are shown. The system response depends critically on three wind and turbulence parameters, and models are presented to predict desired response statistics. An equation error method, which can be used to estimate the required parameters from field data, is also presented.

Holley, W. E.↗
NASA NTRS1982

Noise transmission into semicylindrical enclosures through discretely stiffened curved panels

An analytical study of sound transmission into semicylindrical enclosures through discretely stiffened curved elastic panels is presented. The transmitted sound is estimated by solving the acoustic wave equation for the interior acoustic field, a Galerkin-like method being used. This solution is then coupled to the vibration of the stiffened panels. The response characteristics of these panels are determined by using a modal analysis where the modes are obtained by the finite element-strip method. Numerical results include spectra of the interior sound pressure due to white noise, turbulent boundary layer and propeller noise inputs.

Chang, M. T.↗
NASA NTRS1984

Recovery of burner acoustic source structure from far-field sound spectra

A method is presented that permits the thermal-acoustic efficiency spectrum in a long turbulent burner to be recovered from the corresponding far-field sound spectrum. An acoustic source/propagation model is used based on the perturbation solution of the equations describing the unsteady one-dimensional flow of an inviscid ideal gas with a distributed heat source. The technique is applied to a long cylindrical hydrogen-flame burner operating over power levels of 4.5-22.3 kW. The results show that the thermal-acoustic efficiency at a given frequency, defined as the fraction of the total burner power converted to acoustic energy at that frequency, is rather insensitive to burner power, having a maximum value on the order of 10 to the -4th at 150 Hz and rolling off steeply with increasing frequency. Evidence is presented that acoustic agitation of the flame at low frequencies enhances the mixing of the unburned fuel and air with the hot products of combustion. The paper establishes the potential of the technique as a useful tool for characterizing the acoustic source structure in any burner, such as a gas turbine combustor, for which a reasonable acoustic propagation model can be postulated.

Mahan, J. R.↗