Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “thermal diffusion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,621 records · Page 90

Effect of Film-Hole Shape on Turbine Blade Film Cooling Performance

The detailed heat transfer coefficient and film cooling effectiveness distributions as well as tile detailed coolant jet temperature profiles on the suction side of a gas turbine blade A,ere measured using a transient liquid crystal image method and a traversing cold wire and a traversing thermocouple probe, respectively. The blade has only one row of film holes near the gill hole portion on the suction side of the blade. The hole geometries studied include standard cylindrical holes and holes with diffuser shaped exit portion (i.e. fanshaped holes and laidback fanshaped holes). Tests were performed on a five-blade linear cascade in a low-speed wind tunnel. The mainstream Reynolds number based on cascade exit velocity was 5.3 x 10(exp 5). Upstream unsteady wakes were simulated using a spoke-wheel type wake generator. The wake Strouhal number was kept at 0 or 0.1. Coolant blowing ratio was varied from 0.4 to 1.2. Results show that both expanded holes have significantly improved thermal protection over the surface downstream of the ejection location, particularly at high blowing ratios. However, the expanded hole injections induce earlier boundary layer transition to turbulence and enhance heat transfer coefficients at the latter part of the blade suction surface. In general, the unsteady wake tends to reduce film cooling effectiveness.

Han, J. C.↗

Galactic Starburst NGC 3603 from X-Rays to Radio

NGC 3603 is the most massive and luminous visible starburst region in the Galaxy. We present the first Chandra/ACIS-I X-ray image and spectra of this dense, exotic object, accompanied by deep cm-wavelength ATCA radio image at similar or less than 1 inch spatial resolution, and HST/ground-based optical data. At the S/N greater than 3 level, Chandra detects several hundred X-ray point sources (compared to the 3 distinct sources seen by ROSAT). At least 40 of these sources are definitely associated with optically identified cluster O and WR type members, but most are not. A diffuse X-ray component is also seen out to approximately 2 feet (4 pc) form the center, probably arising mainly from the large number of merging/colliding hot stellar winds and/or numerous faint cluster sources. The point-source X-ray fluxes generally increase with increasing bolometric brightnesses of the member O/WR stars, but with very large scatter. Some exceptionally bright stellar X-ray sources may be colliding wind binaries. The radio image shows (1) two resolved sources, one definitely non-thermal, in the cluster core near where the X-ray/optically brightest stars with the strongest stellar winds are located, (2) emission from all three known proplyd-like objects (with thermal and non-thermal components, and (3) many thermal sources in the peripheral regions of triggered star-formation. Overall, NGC 3603 appears to be a somewhat younger and hotter, scaled-down version of typical starbursts found in other galaxies.

Moffat, A. F. J.↗

Effect of magnetospheric convection on thermal plasma in the inner magnetosphere

The effects of E x B convection on the distribution of plasma parameters in the inner magnetosphere have been examined. Analytical solutions describing density distributions along convective trajectories in the equatorial plane have been found. These solutions suggest the following dependence of plasma concentration n on the magnetic field B along convective trajectories: n proportional to B(exp alpha), where the parameter alpha varies between alpha is less than or = between 4/3 and 2. The alpha = 2 case corresponds to disregarding transport parallel to B. The lower bound alpha = 4/3 describes the situation when parallel transport dominates over convective motions perpendicular to B. A solution has also been obtained describing the effect of convection on diffusive equilibrium profiles in the dayside plasmasphere. In addition, ion temperature variations due to adiabatic effects associated with plasma convection have been analyzed in detail. Convective drifts lead to ion temperature anisotropies with the value and sign of the anisotropy contingent on density and temperature variations, local time, and the location of the convective trajectory with respect to the location of the plasmapause. We have also found that convective motions lead to a substantial exchange of energy between the ionosphere and the plasmasphere through electron heat fluxes.

Khazanov, G. V.↗

A large scale height galactic component of the diffuse 2-60 keV background

The diffuse 2-60 keV X-ray background has a galactic component clearly detectable by its strong variation with both galactic latitude and longitude. This galactic component is typically 10 percent of the extragalactic background toward the galactic center, half that strong toward the anticenter, and extrapolated to a few percent of the extragalactic background toward the galactic poles. It is acceptably modeled by a finite radius emission disk with a scale height of several kiloparsecs. The averaged galactic spectrum is best fitted by a thermal spectrum of kT about 9 keV, a spectrum much softer than the about 40 keV spectrum of the extragalactic component. The most likely source of this emission is low luminosity stars with large scale heights such as subdwarfs. Inverse Compton emission from GeV electrons on the microwave background contributes only a fraction of the galactic component unless the local cosmic ray electron spectrum and intensity are atypical.

Iwan, D.↗

A large scale height galactic component of the diffuse 2-60 keV background

The diffuse 2-60 keV X-ray background has a galactic component clearly detectable by its strong variation with both galactic latitude and longitude. This galactic component is typically 10 percent of the extragalactic background toward the galactic center, half that strong toward the anticenter, and extrapolated to a few percent of the extragalactic background toward the galactic poles. It is acceptably modeled by a finite radius emission disk with a scale height of several kiloparsecs. The averaged galactic spectrum is best fitted by a thermal spectrum of kT about 9 keV, a spectrum much softer than the about 40 keV spectrum of the extragalactic component. The most likely source of this emission is low luminosity stars with large scale heights such as subdwarfs. Inverse Compton emission from GeV electrons on the microwave background contributes only a fraction of the galactic component unless the local cosmic ray electron spectrum and intensity are atypical.

Iwan, D.↗

First-order Fermi particle acceleration by relativistic shocks

Monte Carlo calculations of test particle spectra and acceleration times are presented from first-order Fermi particle acceleration for parallel shocks with arbitrary flow velocities and compression ratios r up to seven, shock velocities u1 up to 0.98c, and injection energies ranging from thermal to highly superthermal. Far above the injection energy, the spectra are well-approximated by a power law and the spectra are always harder than for nonrelativistic shocks. Approximate analytic expression are given for the spectral slope as a function of u1 and r. The acceleration time as a function of particle energy is less than for nonrelativistic shocks by a factor that increases with u1 and is about three for u1 = 0.98c. It is confirmed that the spectrum for pitch-angle diffusion is considerably steeper than for large-angle scattering for the same shock parameters.

Ellison, Donald C.↗

Bridgman Growth of GeSi Alloys in a Static Magnetic Field

Ge(0.95)Si(0.050 alloy crystals have been grown by the vertical Bridgman technique, both with and without an axial 5 Tesla magnetic field. The crystals were processed in a constant axial thermal gradient and the effects of graphite, hot pressed boron nitride, and pyrolitic boron nitride ampoule materials on interface shapes and macrosegregation profiles were investigated. The sample grown in a graphite ampoule at 5 Tesla exhibited a macroscopic axial concentration profile close to that of complete mixing and strong striation patterns. In samples grown in boron nitride ampoules, both with and without a 5 Tesla magnetic field applied, measured macroscopic axial concentration profiles were intermediate between those expected for a completely mixed melt and diffusion-controlled growth, and striation patterns were also observed. Possible explanations for the apparent inability of the magnetic field to reduce the flow velocities to below the growth velocities are discussed, and results of growth experiments in pyrolitic boron nitride ampoules are also described.

Volz, M. P.↗

Measurement of Heat Transfer in Unbonded Silica Fibrous Insulation and Comparison with Theory

Effective thermal conductivity of a high porosity unbonded silica fibrous insulation specimen was measured over a pressure range of 0.001 to 750 torr (0.1 to 101.3 x 10(exp 3) Pa), and with large temperature gradients maintained across the sample thickness: hot side temperature range of 360 to 1360 K, with the cold side at room temperature. The measurements were compared with the theoretical solution of combined radiation/conduction heat transfer. The previously developed radiation heat transfer model used in this study is based on a modified diffusion approximation, and uses deterministic parameters that define the composition and morphology of the medium: distributions of fiber size and orientation, fiber volume fractions, and the spectral complex refractive index of the fibers. The close agreement between experimental and theoretical data further verifies the theoretical model over a wide range of temperatures and pressures.

Daryabeigi, Kamran↗

Satellite Beach Energy - Restructuring the Energy Balance in Satellite Beach, Florida, by Quantifying Solar Energy Production Potential using NASA POWER Data Products and LiDAR

The City of Satellite Beach, Florida, has committed to supplying 100% of its energy use from renewable energy, primarily solar, by the year 2050. The team created a methodology for estimating rooftop solar power potential using a high-resolution Light Detection and Ranging (LiDAR) dataset and the NASA Prediction of Worldwide Energy Resources (POWER) dataset to assist Satellite Beach in reaching their solar renewable energy goals. The POWER dataset provides information on direct and diffuse solar irradiation on horizontal surfaces, surface albedo, and effects of local meteorology, such as clouds. The team integrated the solar irradiance data with the LiDAR data to model slope, aspect, and shadowing in the 7 km2 study area to find suitable roof segments for solar panel installation and estimate the solar potential of each segment. This process was supplemented by an analysis of land surface temperature and urban greenness measured through the Normalized Difference Vegetation Index (NDVI) from Landsat 8 Operational Land Imager and Thermal Infrared Sensor (OLI/TIRS) observations. These metrics serve to target areas for cooling initiatives aimed at reducing Satellite Beach’s overall energy consumption. The team found the total rooftop solar potential throughout the city to be 221,919,330KWh per year with an average annual rooftop photovoltaic, or PV, potential of 55,647KWh per building. As such, the average building could generate over five times the annual energy needs for an average household if PV panels were installed on all viable areas of its roof.

Spencer Nelson↗

The Formation of Electron Heat Flux in the Region of Diffuse Aurora

Whistler and electrostatic electron cyclotron harmonics waves are responsible for scattering and precipitating the energetic plasma sheet electrons that drive the diffuse aurora. These primary electrons with energies in the kiloelectron volt range, simultaneously precipitating in magnetically conjugate regions, produce the secondary electron population and can be reflected by the atmosphere back through the magnetosphere and precipitate into the conjugate region with additional follow‐up atmospheric backscatter. Primary, degraded, and secondary electrons can be trapped back into the magnetosphere as they travel back and forth between the two magnetically conjugate ionospheres and continuously delivering their energy to the cold plasma sheet electrons and form the electron thermal fluxes that deposit this energy at the upper ionospheric altitudes. We consider the formation of these heat fluxes focusing on the magnetosphere‐ionosphere energy interplay of the entire superthermal electron spectra from 1 eV up to 10 keV and discuss the efficiency of the different spectral energy intervals that contribute to the electron plasma heating at the magnetospheric altitudes. Our parametric studies at L = 6.8, with lower and upper band chorus whistler wave amplitudes of 10 pT and electron cyclotron harmonic wave amplitudes of 1 mVm−1, indicate the dominant role of the whistler mode in the formation of the electron heat flux coming from the magnetosphere to the ionosphere.

George V. Khazanov↗

Thermal infrared imaging of subarcsecond structure in the trapezium nebula

We present 11.7 and 8.8 micron images of the central region of the Ney-Allen Nebula In Orion which reveal mid-infrared counterparts to the ionized globules previously discovered by optical and radio observations. The 0.5 arcsec full width at half maximum (FWHM) resolution images also reveal several arc-shaped structures which are associated with the compact sources. Each of the arcs points toward theta(sup 1) Ori C, providing further evidence for the strong-effects of the intense radiation and wind from this star on the central Orion Nebula. Low-resolution spectra of a few of these condensations and arcs are similar to spectra of the diffuse, optically thin silicate dust observed throughout the region. Photometry of one of the condensations, however, indicates that is cooler than the others. Simple momentum-balance arguments indicate that dust in the arcs could originate in the outflow from the compact sources and flow outward until stopped by the stellar wind and radiation pressure from theta(sup 1) Ori C.

Hayward, T. L.↗

Atomic oxygen transport in the thermosphere.

The photodissociation of oxygen in the lower thermosphere is evaluated to obtain its global average value and the hemispheric imbalance. The observed concentrations of atomic oxygen do not reflect this imbalance in production due to the effect of seasonal wind patterns redistributing the atomic oxygen. The wind system necessary to compensate for the imbalance in solar thermal input into the lower thermosphere is found to transport an amount of atomic oxygen sufficient to compensate for the hemispheric imbalance in production. Ionospheric data indicate a winter enhancement in atomic oxygen concentration; to produce this, a higher degree of oxygen dissociation than that normally accepted (i.e., higher than an atomic to molecular oxygen ratio of unity at 120 km) is needed. The concept that the concentrations of atomic oxygen observed over the winter polar region are maintained by transport from lower latitudes requires that eddy diffusion coefficients derived from vertical transport at low latitudes (ignoring horizontal transport) be reduced by about 25%.

Johnson, F. S.↗

Growth of crystals from solutions in low gravity (A0139A)

The objective of the low gravity crystal growth experiments is to develop a novel solute diffusion method for growing single crystals. The experiments will utilize specially designed reactors with three or more compartments separated by valves to keep the reactant solutions and solvent separated until the apparatus reaches low gravity. There will be a mechanism for opening the valves automatically to initiate the diffusion and growth processes. The reactant reservoirs will be large enough to take advantage of the time provided by the Long Duration Exposure Facility (LDEF) flight. An array of several reactors will be mounted in a 12-in.-deep end center tray located on the Earth-facing end of the LDEF. Several reactors operating simultaneously will allow experimentation with more than one crystal growth system and/or variations of conditions for each. The reactors will be enclosed in a vacuum tight container and will be surrounded by thermal insulation. The temperature (approximately 35 deg C) will be regulated and any departures from the desired temperature will be recorded. Power requirements will be provided by LiSO2 batteries.

Lind, M. D.↗

Applied-field magnetoplasmadynamic engine developments

There are potential space exploration missions which may significantly benefit from the use of electric propulsion at power levels of hundreds of kilowatts. The applied magnetic field MPD thruster is potentially capable of efficient, high specific impulse operation in this power range. This paper describes current experimental and analytical efforts to further the development of such a thruster and presents the latest results. In particular, efforts to measure, simultaneously, the thrust developed by the archead and by the electromagnet, and to evaluate the effect of a diffuser on vacuum tank back pressure, are presented and discussed. It was found that with ammonia vapor as propellant, the vacuum tank pressure was reduced from 8 to 4.9 Pa at a power level of 80 kW. This pressure decrease is expected to become greater as the power and applied field are increased. Also, the development of a cathode/plasma interaction model for determining the heat loads to the cathode as functions of the various free stream plasma parameters is presented. This model is combined with a cathode thermal model in order to provide a complete and integrated picture of MPD thruster cathode operation. Several computational examples are used to illustrate the combined model.

Goodfellow, K. D.↗

Infrared diffuse reflectance spectra of carbonaceous chondrites: Amount of hydrous minerals

Infrared diffuse reflectance spectra (2.53-25 microns) of some carbonaceous (C) chondrites were measured. The integrated intensity of the absorption bands near 3 microns caused by hydrous minerals were compared with the modal content of hydrous minerals for the meteorites. The CM and CI chondrites show larger values of the intergated intensity than those of the unique C chondrites Y82162, Y86720 and B7904, suggesting that the amount of hydrous minerals in the CM and CI chondrites is larger, which supports the contention that hydrous minerals were dehydrated by thermal metamorphism in the unique chondrites. Orgueil (CI) has the largest value of the integrated intensity among the C chondrites we measured and shows a sharp absorption band at 3685/cm (2.71 microns) that is not seen in the spectra of the CM chondrites. There is an excellent correlation between the observed hydrogen content in C chondrites and the integrated intensity. The CM chondrites show a wide variation in the strength of absorption bands at 1470/cm (6.8 microns), despite the similarity in absorption features near 3 micron for all CM chondites. The 1470/cm band could be due to the presence of some hydrocarbons but may also be a result of terrestrial alteration processes.

Miyamoto, M.↗

The structure of mass-loading shocks. 1: Comets

A new multifluid model to describe the solar wind-cometary ion plasma in the outer cometary coma is derived. This model is distinguished from previous multifluid models in that wave-particle effects are included explicitly. By considering hydrodynamic timescales, self-consistent dissipative terms (which correspond to the spatial diffusion of cometary ions) are derived, thereby allowing the structure of a cometary bow shock to be resolved. In the hypersonic limit, our diffusive multifluid model reveals an attractive connection to the one-fluid model formulated by Biermann et al. (1967), a connection which serves as an important guide when investigating our more complicated nonhypersonic diffusive model. The detailed model consists of cometary ions diffusing in a warm solar wind which is heated by the dissipation of Alfvenic turbulence (in situ and generated by the initial ring beam distribution). The quasi-parallel cometary shock is found to be at least an order of magnitude thicker than a quasi-perpendicular cometary shock. It is furthermore found that for undisturbed solar wind (sonic) Mach numbers in excess of approximately 6, the cometary bow shock (for both perpendicular and parallel cases) is smoothed completely by the cometary ions and no 'proton' or thermal subshock is necessary. Finally, a detailed comparison of the model with the plasma observations made at Halley by Giotto is undertaken. It is found that the observed shock structure, thickness, location, and plasma parameters compare well with the predictions of the theoretical model, particularly in the case of the quasi-parallel shock.

Zank, G. P.↗

Semi-Annual Status Report

This 6 month period continued the effort on absolute spectrally continuous stellar calibration begun in January 1991. The Midcourse Space Experiment (MSX) DCATT team has continued its analysis and intercomparisons of the Spatial Infrared Imaging Telescope (SPIRIT-III) ground calibration, the on-orbit stellar calibration (using our stellar spectra), and the on-orbit observations of the MIT Lincoln Labs. "emissive spheres". All three approaches are in very good agreement, at about the +/-3% level (absolute). This demonstrates the consistency of our overall calibration scheme and validates the context in which Infrared Space Observatory (ISO) and MSX data also reside. Final "globalization" of the overall MSX calibration is in progress, combining calibrations by stars, by the "emissive spheres" experiments, and by the NIST-traceable ground calibration. The work in support of the Infrared Telescope Satellite (IRTS) continues. I am currently calculating the contribution of diffuse starlight to the background in "dark" regions of the sky observed by the IRTS Near-IR Spectrometer. To accomplish this I am using the SKY model with a new extended wavelength capability, covering the 1.00-2.00 micron region for the first time. These calculations, together with models of the zodiacal light, will be used to seek the presence of a cosmic near-IR background. Papers VIII and IX in the calibration series appeared in this 6 month period. These describe our results on asteroid thermal nodes and anticipate the eventual production of a new network of stellar calibrators, numbering over 400 and extending over the whole sky. These will be constructed as stellar "templates", building on the legacy of our series of calibration papers. The first analyses of star counts from MSX are under way using SKY.

Cohen, Martin↗

Finite-amplitude thermal convection in a spherical shell

The properties of finite-amplitude thermal convection for a Boussinesq fluid contained in a spherical shell are investigated. All nonlinear terms are retained in the equations, and both axisymmetric and nonaxisymmetric solutions are studied. The velocity is expanded in terms of poloidal and toroidal vectors. Spherical surface harmonics resolve the horizontal structure of the flow, but finite differences are used in the vertical. With a few modifications, the transform method developed by Orszag (1970) is used to calculate the nonlinear terms, while Green's function techniques are applied to the poloidal equation and diffusion terms.

Young, R. E.↗