SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
This report illustrates how energy management information systems (EMIS) can enable federal agencies to improve energy performance, reduce costs, and meet energy goals. The guide discusses how to identify and implement needed EMIS functions and capabilities, covering the entire EMIS life cycle including system design, procurement, implementation, and ongoing maintenance.
This land-based wind energy siting resource was created by the U.S. Department of Energy Wind Energy Technologies Office’s WINDExchange initiative and presents foundational information about land-based utility-scale wind energy that local decision makers can use when making community decisions about wind energy development. Consolidated, accessible, and easy to understand, this information resource focuses on land-based wind energy from the community perspective and examines siting-related impacts and mitigation strategies. Other impacts and strategies exist, such as those related to economics, climate, health, water, emissions, and waste; however, they are not covered in this resource. For more information on economic considerations, see the “Land-Based Wind: Economic Development Guide” and “Advancing the Growth of the U.S. Wind Industry: Federal Incentives, Funding, and Partnership Opportunities.” The intended audience for this guide is county-level decision officials, as they are often responsible for approving both wind energy ordinances and applicable permits needed for wind energy development. This guide may also provide relevant information to decision makers from other government jurisdictions and interested community members.
Under existing grid operations, large synchronous generators provide sufficient rotational inertia to form a rigid backbone for the bulk power system. With photovoltaics (PV) forecasted to provide more than 600 GW of generation by 2050 under the U.S. Department of Energy’s SunShot Initiative objectives, however, it is clear that power electronic inverters will play a dominant role in future systems, and low-inertia stability must be ensured to maintain system reliability. Today, the risks to system stability can be observed on geographically small islands, such as Hawaii, which contain a relatively large amount of installed PV. These risks stem from a fundamental shortcoming of contemporary control strategies—existing inverter controllers cannot guarantee grid stability. Given that future power systems driven by sustainable resources will be characterized by low inertia, locations such as Hawaii provide a glimpse into the obstacles facing future power systems. Considering these challenges, the aim of this project was to develop and demonstrate distributed inverter controllers that enable the reliable control of low-inertia power systems with hundreds of gigawatts of integrated PV.
Cybersecurity R&D and demonstration of security operations tool readiness and commercialization.
This project demonstrated that solar PV can be recruited to stabilize the grid, smooth out disturbances, manage power flows, and assist circuit switching operations. It developed a radically new, layered control framework for Distributed Energy Resources (DER) to act in response to real-time, measured conditions on their local distribution circuit, rather than waiting for a price signal to indicate preferred behavior. By enabling resources to act as good citizens on the electric grid, Phasor-Based Control (PBC) facilitates arbitrarily high solar penetration levels.
The Performance Rating Method (PRM) in ASHRAE Standard 90.1 (ASHRAE 2016) is a simulation ruleset for establishing minimum code compliance and for rating a building’s beyond-code applications. Building energy modeling (BEM) to comply with the PRM is often expensive and time consuming due to the complexity of code requirements. The goal of this project is to develop and codify a simplified PRM (S-PRM) approach for commercial buildings that will expand the use of BEM for small or simple buildings by defining a low-cost, simplified approach for creating robust and detailed models. This report summarizes a review of (i) the more commonly used existing codes, (ii) incentive programs, and (iii) the existing simplified energy modeling tools to identify which requirements are good candidates for simplification.
The Statement of Work, Deliverables and Costs for the project are provided.
This SolarExPert project has developed a Sustainable Grid Platform (SGP) with scalable architecture of distributed control and optimization. The SGP consists of the following major functions: 1) an advanced grid architecture with hierarchical and distributed communication and control, combined with the OpenFMB standard and implemented on the Multi-Agent OpenDSS (MA-OpenDSS) platform; 2) an online distributed stochastic optimal power flow; 3) an online distributed system state estimation algorithm; 4) the distributed Volt/VAR optimization and frequency control algorithms; 5) the distributed distribution system restoration strategy. The developed SGP together with advanced functions are tested in 1 million (1M)-node distribution system on the MA-OpenDSS platform. Furthermore, the models and algorithms are tested in 100,000-node system HiL simulation, and also in P-HiL implementation with 100 physical devices. The developed functions haven been validated and tested on the selected actual distribution feeder with the data collected from the field of Maui Meadows in Hawaii. The distributed PV hosting capacities with cooperative Volt/VAR and Volt/VAR/Watt control are estimated and compared to provide recommendations for customers and the utility company.
Our primary aim in this work is to understand how to efficiently obtain reliable uncertainty quantification in automatic learning algorithms with limited training datasets. Standard approaches rely on cross-validation to tune hyper parameters. Unfortunately, when our datasets are too small, holdout datasets become unreliable—albeit unbiased—measures of prediction quality due to the lack of adequate sample size. We should not place confidence in holdout estimators under conditions wherein the sample variance is both large and unknown. More poigniantly, our training experiments on limited data (Duersch and Catanach, 2021) show that even if we could improve estimator quality under these conditions, the typical training trajectory may never even encounter generalizable models.
This project was a follow-on to the Sandia National Laboratories (SNL) and the Laboratory for Laser Energetics (LLE) ARPA-E ALPHA project entitled “Demonstrating Fuel Magnetization and Laser Heating Tools for Low-Cost Fusion Energy”. The primary purpose of this follow-on project was to obtain additional data at the OMEGA facility to help better understand how MagLIF, a platform that has already demonstrated the scientific viability of magneto-inertial fusion, scales across a factor of 1000 in driver energy. A secondary aspect of this project was to extend simulations and analysis at SNL to cover a wider magneto-inertial fusion (MIF) parameter space and test scaling of those models across this wide range of input energies and conditions of the target. This work was successful in improving understanding of how key physics elements of MIF scales and improves confidence in setting requirements for fusion gain with larger drivers. The OMEGA experiments at the smaller scale verified the hypothesis that preheating the fuel plays a significant role in introducing wall contaminants that mix into the fuel and significantly degrade fusion performance. This contamination not only impacts target performance but the optimal input conditions for the target. However, analysis at the Z-scale showed that target performance at high preheat levels is limited by the Nernst effect, which advects magnetic flux from the hot spot, reducing magnetic insulation and consequently reduces the temperature of the fuel. The combination of MagLIF experiments at the disparate scales of OMEGA and Z along with a multiscale 3D simulation analysis has led to new insight into the physical mechanisms responsible for limiting target performance and provides important benchmarks to assess target scaling more generally for MIF schemes. Finally, in addition to the MagLIF related work, a semi-analytic model of liner driven Field Reversed Configuration (FRC) was developed that predicts the fusion gain for such systems. This model was also validated with 2D radiation magneto-hydrodynamic simulations and predicts that fusion gains of near unity could be driven by the Z machine.
The original project proposal submitted from NovaTorque Inc (NovaTorque) in 2016 was to improve the existing motor with 95% efficiency by reducing the losses by 21% to achieve 96%. A few months after the proposal was submitted, NovaTorque lost funding and went out of business. The assets of NovaTorque were then acquired by Regal Beloit Corporation (“Regal Beloit” or “Regal”). When the NovaTorque proposal was selected, the project was transferred to Regal Beloit. Once we had production samples from the new Regal production line, they were tested at the Regal Beloit test lab in Wausau, WI. The original NovaTorque motor had an efficiency of 95%, but when the technology was transferred to Regal Beloit, there were multiple manufacturing improvements made, even though the basic electromagnetic design did not change. The test results in Wausau showed that the motors made at the Regal Beloit plant had an efficiency of 96%. Since the goal of the project was to reduce the losses by 21%, a new efficiency target of 96.8% became the project objective. In the first budget period, motors were tested to get the baseline performance. We then used FEA modeling with ANSYS Maxwell to model the existing motor to get correlation between the FEA simulations and the actual test results. Once the model was validated, we evaluated some changes that could be made to the stator to reduce the losses and improve efficiency without changing the rotor or stator housing, keeping the modifications easy to implement. The changes were primarily in the area of making the stator axially shorter and adding Soft Magnetic Composite (SMC) tooth tips. In the second budget period, we proceeded to design and build the new stator that was identified above and identified additional improvements in the process that included a stator machining modification and the use of rectangular wire. When we actually built the motor, the choice of rectangular wire turned out to be a problem. The wire was made by squishing round wire to get the rectangular shape, which caused work hardening, making the wire too stiff to make the desired coils. We shifted to annealed square wire which was better, but we still could not maintain the proper coil envelope. The result was that we had reduced cross section area for stator laminations. We also had to have a radial offset resulting in a radial misalignment between the stator and rotor because of the oversized coils. After the motor was completed, it was shipped to Texas A&M University for testing. With the loss of flux from these issues, the measured motor efficiency was only 96.3%. The primary focus of this motor was to make sure our FEA simulation model predicted the measured losses and overall efficiency, this we moved on to the FEA simulation. The FEA simulations of the motor “as built” with misalignments had good correlation with the test results, so the next step was to use that model to optimize the design of the motor for a final build. This time we considered changes to the stator and rotor and also minor changes to the housing diameter. In the third budget period, we did the detailed design and construction of the final prototypes. The final prototypes had a slight increase in the stator diameter to fit in a standard Regal Beloit housing. We shortened the stator and use more layers of wire in the coils. We also increased the cone angle of the rotor and stator from the original 110 degrees to 130 degrees to get some additional efficiency and optimized the stator cross section. The predicted efficiency from the FEA simulations was 96.9%. When completed, the motors were tested. We were a little short of reaching our target efficiency goal of 96.8%. We were only able to get to 96.7% efficiency. While it may be possible with additional iterations in designs and future builds to gain that additional 0.1%, we believe that we are close to the best we can achieve from a practical viewpoint, and additional iterations would be more work than the potential gains would be worth. No other motor in this class can even reach the 96% that we started with.
A transparent and easy-to-use tool for feedstock-specific, farm-level CI calculation of feedstocks is helpful. With the ARPA-E support, we have developed a tool–the Feedstock Carbon Intensity Calculator (FD-CIC). The first version of FD-CIC was released with the GREET® model in 2020 (Wang et al., 2020) so that corn feedstock producers could use this publicly available tool (https://greet.es.anl.gov/tool_fd_cic) to quantify corn grain CIs with farm-level input data and management practices. In the 2021 version, we expand the tool’s capabilities by including additional feedstocks such as soybeans, sorghum, and rice. Similar to corn, it calculates the farm-level CI for these feedstocks by allowing user-defined farm-level farming inputs and incorporating the GHG emission intensities of these inputs from GREET (in particular, GREET1, the fuel cycle model of GREET).
In this project, Lumileds developed a platform of high-luminance LEDs and LED light engines to increase efficacy and reduce energy consumption of directional lighting applications. The platform was developed through innovations in three key areas: (1) epi and device architectures optimized for high drive current density, breaking through the tradeoff in efficacy (lm/W) vs. emittance (lm/mm 2 ) exhibited by state-of-the-art products; (2) a compact chip-scale package allowing high packing density and thus high overall luminance in multi-emitter arrays; and (3) phosphor technology to enable correlated color temperature (CCT) tuning in multi-emitter arrays with optimized LED utilization, efficacy, color uniformity and color quality. Directional indoor and outdoor lighting applications make up a major portion of the total lighting energy consumption in the U.S, accounting for >40% of the energy savings potential of solid-state lighting. Success of this project helps accelerate the realization of these energy savings both through higher system efficacy and adoption due to new functionality, and thus contributes significantly to realizing the DOE Lighting program goals.
Financial risk resulting from the uncertainty associated with developing, owning, and operating wind power plants remains a barrier to reducing the levelized cost of energy (LCOE). On average, modern wind power plants in the U.S. underperform their expected annual energy output by 3.5-4.5% , with many underperforming by over 10%. To compensate for this uncertainty, investors require a larger return on investment (ROI) and apply "knock-down" factors that mask much of the underlying sources of uncertainty. Wind energy projects thus have reduced access to low-cost capital. Furthermore, operating wind plants often take a simple approach to estimating operations & maintenance (O&M) costs (e.g. straight-line estimates based on similar plants), which can eat into profits. To overcome these issues, the wind industry must improve the models they use for estimating wind plant performance and operations. An industry consortium (IC) requested that the National Renewable Energy Laboratory (NREL) lead a Department of Energy (DOE) working group to benchmark the accuracy of wind power plant energy predictions against real operational data. The IC was also motivated by DOE and NREL's potential to characterize systematic energy underperformance, identify sources of uncertainty, and explore root causes. The Wind Plant Performance Prediction (WP3) project was created out of this request, and this report represents the successful completion of Phase 1 of the WP3 project. During the project, wind plant owners provided both pre-construction and operational data to NREL. The pre-construction data was provided to wind resource assessment (WRA) consultants so they could conduct energy yield assessments (EYA). NREL took all of the completed EYAs, along with the operational data, and conducted an operational assessment to benchmark the EYA results against actual operational data. Given the large amounts of sensitive data required for this effort, as well as historical opposition to sharing data within industry, successful completion of Phase 1 represents an unprecedented milestone for industry data sharing. To improve the accuracy and confidence of pre-construction EYAs, wind plant owners and investors need better, more certain, energy yield predictions. The WP3 Benchmark Project is an industry-driven response to this reality. For the first time, industry has taken the important step of working together at scale, sharing valuable operational data with DOE and NREL in order to investigate the sources of bias and uncertainty in these energy estimates. This IC provides wind plant preconstruction and operational data to NREL in an organized and documented fashion and provides guidance and feedback as needed. The IC also provides introspection of the design of experiment, key metrics of success, data challenges, analysis best practices, and quality of results.
Detailed experimental studies of oxygen capture in the argon purification process using activated-copper on alumina and layered double hydroxide (LDH) were carried out, and the results were compared to the BASF commercial copper material Cu-0226 S performance. Here, we report the following main findings: i) the desired crystal structures for the studied materials were obtained after the synthesis process, ii) the use of the LDH structure promoted greater dispersion of the CuO phase when compared to BASF commercial catalyst, iii) alumina impregnated with copper demonstrated a similar result as the BASF sample for O 2 capture, and iv) among the three samples evaluated, the LHD sample demonstrated the best results regarding oxygen capturing performance becoming a promising structure for further studies.
This feasibility study was motivated by a need for alternative mandrel materials to meet the next generation of inertial confinement fusion (ICF) ablator capsules. In response, a new polymer material based on reversible covalent bonds was proposed, with the objective to design thermosets to withstand elevated temperatures (140-200 degrees Celsius) while also being thermally degradable on-demand via controlled decomposition at temperatures above 200 degrees Celsius. A series of cyclopentadiene (Cp) containing thermosets were designed and synthesized to evaluate curing, reversibility and degradability via controlled retro-Diels Alder reactions using Cp-cycloaddition adducts as crosslinks. Ultimately, the current iteration of materials and strategy pursued in this study was assessed as impractical for meeting the needs and objectives of Lawrence Livermore National Laboratory’s (LLNL) target fabrication program.
NREL’s Cambium tool generates forward-looking simulations of marginal wholesale electricity costs associated with NREL’s Standard Scenarios. The scenarios include growing shares of variable renewable energy (VRE, i.e. wind and solar), among other power sector assumptions, between 2018 and 2050. The tool’s primary output—hourly costs at more than 130 balancing areas—could serve as public and transparent data source that supports electric-sector decision-making processes across the U.S. Berkeley Lab conducts a large range of analyses that use historical and forward-looking wholesale electricity prices to inform electric-sector decisions. In this report, Berkeley Lab uses its expertise to evaluate the Cambium cost data. We compare Cambium data with historical wholesale prices for the year 2018 and other modeled prices for the year 2030. We then present eight case studies in which Berkeley Lab researchers use Cambium data to replicate previous analyses based on other price datasets. We describe where primary findings and underlying key price dynamics align or differ, and highlight possible novel insights from the Cambium data. Finally, we qualitatively evaluate the suitability of Cambium costs in ten additional Berkeley Lab studies, though a direct comparison with alternative price data was not feasible at this time. The goal is to inform how electric-sector decision-makers and DOE program offices may be able to use this cohesive dataset, and to highlight what improvements to Cambium may make it even more useful.
Soils store three times as much carbon (C) as the atmosphere, but are not at capacity, and enhanced soil C storage is considered an essential strategy to mitigate rising atmospheric CO 2 levels. Agricultural soils have experienced substantial C loss in the past century due to poor agricultural practices and erosion. A shift towards deep-rooting crops and low-impact soil management could potentially increase long-term sequestration of C fixed by plants and stored in their root tissues, particularly for crops that have naturally deep root systems (>1 meter). A substantial amount of the CO 2 taken up by plants is allocated to their root systems, and because C deposited in deep soil layers has a longer residence time (up to millennia, in contrast to C deposited in topsoils), C increases at depth may have better long-term C sequestration potential than topsoils. However, the accrual, turnover, and stabilization of C in subsoils is a critical knowledge gap. We investigated a deeply rooted plant, switchgrass (Panicum virgatum), as a means of increasing carbon stocks in marginal and agricultural soils. We hypothesized that deep (>30 cm) SOC stocks would be greater under bioenergy crops relative to stocks under shallow-rooted conventional crop cover. To test this hypothesis, we compared soil depth profiles beneath deeply rooted switchgrass (cultivated for 4-30 years) and paired shallowrooted annual controls. We studied 12 field sites, 3 that were collected in 2018 before the start of the project as part a Department of Energy (DOE) Sustainable Biofuels study, and 9 that we collected in 2019 on a national field sampling campaign across the eastern US. In our publication from the 2018 study, which was written in collaboration with the LLNL Soil Microbiome Scientific Focus Area (SFA), we found that C stocks increased under switchgrass, but that the increases were dependent on soil texture. In the 2019 study, we found that carbon accrual tended to occur most consistently in low C soil in the southern US, which could indicate that perennial grasses may be a viable strategy to increase SOC in marginals soils in this region. We have published two studies from the 2019 sampling campaign thus far, we measured microbial growth parameters that will aid in modeling subsoil carbon cycling, and we found that switchgrass appears to move water upward in the soil profile and could promote drought tolerance, which a phenomenon commonly performed by trees known as ‘hydraulic redistribution;’ our study is the first to show this can occur in deep-rooted grasses. Finally, we published a modeling paper in collaboration with the LLNL Soil Microbiome SFA, where we found that poorly crystalline minerals are abundant and strongly correlated with organic C in geographically limited zones with enhanced weathering rates. Our results will inform technological development in the agricultural carbon sequestration sector as well as future negative emissions policies.