Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “surface states”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,621 records · Page 90

Reactivity from excited state {sup 4}FeO{sup +} + CO sampled through reaction of ground state {sup 4}FeCO{sup +} + N{sub 2}O

The kinetics of the FeCO{sup +} + N{sub 2}O reaction have been studied at thermal energies (300–600 K) using a variable temperature selected ion flow tube apparatus. Rate constants and product branching fractions are reported. The reaction is modestly inefficient, proceeding with a rate constant of 6.2 × 10{sup −11} cm{sup 3} s{sup −1} at 300 K, with a small negative temperature dependence, declining to 4.4 × 10{sup −11} cm{sup 3} s{sup −1} at 600 K. Both Fe{sup +} and FeO{sup +} products are observed, with a constant branching ratio of approximately 40:60 at all temperatures. Calculation of the stationary points along the reaction coordinate shows that only the ground state quartet surface is initially sampled resulting in N{sub 2} elimination; a submerged barrier along this portion of the surface dictates the magnitude and temperature dependence of the total rate constant. The product branching fractions are determined by the behavior of the remaining {sup 4}OFeCO{sup +} fragment, and this behavior is compared to that found in the reaction of FeO{sup +} + CO, which initially forms {sup 6}OFeCO{sup +}. Thermodynamic and kinetic arguments are used to show that the spin-forbidden surface crossing in this region is efficient, proceeding with an average rate constant of greater than 10{sup 12} s{sup −1}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of the band structure of InGaN/GaN quantum well on the surface plasmon enhanced light-emitting diodes

The spontaneous emission (SE) of InGaN/GaN quantum well (QW) structure with silver(Ag) coated on the n-GaN layer has been investigated by using six-by-six K-P method taking into account the electron-hole band structures, the photon density of states of surface plasmon polariton (SPP), and the evanescent fields of SPP. The SE into SPP mode can be remarkably enhanced due to the increase of electron-hole pairs near the Ag by modulating the InGaN/GaN QW structure or increasing the carrier injection. However, the ratio between the total SE rates into SPP mode and free space will approach to saturation or slightly decrease for the optimized structures with various distances between Ag film and QW layer at a high injection carrier density. Furthermore, the Ga-face QW structure has a higher SE rate than the N-face QW structure due to the overlap region of electron-hole pairs nearer to the Ag film.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Radar Reconnaissance of Near-Earth Asteroids

Groundbased radar observations of NEAs can help identify space resources with commercial potential and can dramatically reduce the cost and risk of the initial spacecraft missions to those objects. The near-Earth asteroid (NEA) population is thought to contain approximately 1500 objects as large as a kilometer, approximately 300,000 as large as 100 meters, and more than 100,000,000 as large as 10 meters. More than 10% of the NEAs are more accessible in terms of mission delta-V (i.e., fuel required) than the Moon, Mars, or the moons of Mars. Fewer than 1000 NEAs have been found, but the discovery rate is increasing rapidly. Once an asteroid is discovered (necessarily by wide-field optical telescopes), radar can provide otherwise unavailable information about its size, shape, spin state, and surface properties if it approaches within the range of the Goldstone (California) or Arecibo (Puerto Rico) radar telescopes. Asteroids generally appear as unresolved points through groundbased optical telescopes, but radar measurements of the distribution of echo power in time delay (range) and Doppler frequency (radial velocity) can yield images with resolution as fine as a decameter. Image sequences that furnish adequate orientational coverage can be inverted to construct geologically detailed 3-D models, to define the rotation state precisely, and to constrain the object's internal density distribution. Estimates of radar scattering properties characterize the surface's cm-to-m-scale roughness as well as its bulk density, which for asteroids depends primarily on porosity and metal concentration. A useful spin-off of radar detection is orbit refinement that simplifies navigation of flyby and rendezvous spacecraft.

Ostro, S. J.↗

Radar Reconnaissance of Near-Earth Asteroids

Groundbased radar observations of NEAs can help identify space resources with commercial potential and can dramatically reduce the cost and risk of the initial spacecraft missions to those objects. The near Earth asteroid (NEA) population is thought to contain approx. 1500 objects as large as a kilometer, approx. 300,000 as large as 100 meters, and more than 100,000,000 as large as 10 meters. More than 10% of the NEAs are more accessible in terms of mission delta-V (i.e., fuel required) than the Moon, Mars, or the moons of Mars. Fewer than 1000 NEAs have been found, but the discovery rate is increasing rapidly. Once an asteroid is discovered (necessarily by wide-field optical telescopes), radar can provide otherwise unavailable information about its size, shape, spin state, and surface properties if it approaches within the range of the Goldstone (California) or Arecibo (Puerto Rico) radar telescopes. Asteroids generally appear as unresolved points through groundbased optical telescopes, but radar measurements of the distribution of echo power in time delay (range) and Doppler frequency (radial velocity) can yield images with resolution as fine as a decameter. Image sequences that furnish adequate orientational coverage can be inverted to construct geologically detailed 3-D models, to define the rotation state precisely, and to constrain the object's internal density distribution. Estimates of radar scattering properties characterize the surface's cm-to-m-scale roughness as well as its bulk density, which for asteroids depends primarily on porosity and metal concentration. A useful spin-off of radar detection is orbit refinement that simplifies navigation of flyby and rendezvous spacecraft.

Ostro, S. J.↗

Stabilization of Catalytically Active Surface Defects on Ga-doped La–Sr–Mn Perovskites for Improved Solar Thermochemical Generation of Hydrogen

Solar thermochemical hydrogen (STCH) production from water splitting typically requires performing redox cycles at temperatures above 1200 °C to reduce and re-oxidize the bulk of a reversible material. Bulk processes such as oxygen vacancy formation and oxygen diffusion energies dictate the viability of a material for STCH. The surface plays an important role in the formation and destruction of vacancies and interacts with gas phase water and surface adsorbed species. These surface processes can lead to surface reconfigurations and even the formation of surface phases with stoichiometry and oxygen content very different from the bulk composition. Understanding in-situ the surface chemical state and its evolution under water splitting is important to design nonstoichiometric oxides capable of longer-lasting STCH generation at lower temperatures. In this work, we describe the water splitting active defect sites in LSM ((La 0.65 Sr 0.35 ) 0.95 MnO 3–δ ) and Ga-doped LSM ((La 0.6 Sr 0.4 ) 0.95 (Mn 0.8 Ga 0.2 )O 3–δ ) perovskites during Operando thermochemical water splitting conditions using ambient-pressure X-ray photoelectron spectroscopy (AP-XPS) experiments at 800 °C under steam. We show that sub-stoichiometric La +3 in the oxygen-vacancy rich surface at operating conditions can be used to correlate surface water splitting activity and the creation of surface hydroxide intermediates. The addition of Ga in LSM is shown to drastically stabilize the surface chemical composition by preventing Sr segregation and stabilizing catalytically active surface defects that promote the binding of adsorbed hydroxides. Here, we use Operando AP-XPS quantification of metastable surface hydroxide intermediates (La(OH) 3 ) to determine the amount of catalytically active surface sites in LSM (2.9%) and in LSMG (7.8–8.1%, depending on the bulk oxidation state).

08 HYDROGEN↗

Highly Active Ceria-Supported Ru Catalyst for the Dry Reforming of Methane: In Situ Identification of Ru δ+ –Ce 3+ Interactions for Enhanced Conversion

The metal-oxide interaction changes the surface electronic states of catalysts deployed for chemical conversion, yet details of its influence on the catalytic performance under reaction conditions remain obscure. In this work, we report the high activity/stability of a ceria-supported Ru-nanocluster (<1 nm) catalyst during the dry reforming of methane. To elucidate the structure-reactivity relationship underlying the remarkable catalytic performance, the active structure and chemical speciation of the catalyst was characterized using in situ X-ray diffraction (XRD) and X-ray absorption fine structure (XAFS), while the surface chemistry and active intermediates were monitored by in situ ambient-pressure X-ray photoelectron spectroscopy (AP-XPS) and diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS). Methane activates on the catalyst surface at temperatures as low as 150 °C. Under reaction conditions, the existence of metal-support interactions tunes the electronic properties of the Ru nanoclusters, giving rise to a partially oxidized state of ruthenium stabilized by reduced ceria (Ru δ+ -CeO 2-x ) to sustain active chemistry, which is found to be very different from that of large Ru nanoparticles supported on ceria. The oxidation of surface carbon is also a crucial step for the completion of the catalytic cycle, and this is strongly correlated with the oxygen transfer governed by the Ru δ+ -CeO 2-x interactions at higher temperatures (>300 °C). Here, the possible reaction pathways and stable surface intermediates were identified using DRIFTS including ruthenium carbonyls, carboxylate species, and surface -OH groups, while polydentate carbonates may be plain spectators at the measured reaction conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Operando study of Pd(100) surface during CO oxidation using ambient pressure x-ray photoemission spectroscopy

The surface chemical states of Pd(100) during CO oxidation were investigated using ambient pressure x-ray photoelectron spectroscopy and mass spectroscopy. Under the reactant ratio of CO/O 2 = 0.1, i.e. an oxygen-rich reaction condition, the formation of surface oxides was observed with the onset of CO oxidation reaction at T = 525 K. As the reactant ratio (CO/O 2 ) increased from 0.1 to 1.0, ~ 90 % surface oxides remains on surface during the reaction. Upon the formation of surface oxides, the core level shift of oxygen gas phase peak was observed, indicating that change of surface work function. As CO oxidation takes places, i.e. making a transition from CO covered surface to the oxidic surface, the work functions of surface oxide on Pd(100) and Pt(110) display opposite behavior.

36 MATERIALS SCIENCE↗

Insights on the influence of surface roughness on photovoltaic properties of state of the art copper indium gallium diselenide thin films solar cells

The influence of Cu(In,Ga)Se{sub 2} (CIGSe) surface roughness on the photovoltaic parameters of state of the art devices is reported, highlighting the importance of the roughness of the as-grown CIGSe absorbers on solar cell efficiencies. As-grown CIGSe surface is progressively smoothed using a chemical etch, and characterized by SEM, AFM, XPS, {mu}-Raman spectroscopy, x-ray diffraction (XRD), and reflectivity. The decrease of roughness has no marked influence on crystal structure and surface composition of the absorber. The main effect is that the total reflectivity of the CIGSe surface increases with decreasing roughness. The samples are processed into solar cells and characterized by current-voltage measurements. While the open circuit voltage (V{sub oc}) and fill factor remain constant, the short circuit current (J{sub sc}) decreases markedly with decreasing roughness, resulting in a reduction of the solar cell efficiency from 14% down to 11%, which exceeds the expected decrease from increased reflectivity. Quantum efficiency and reflectivity measurements on complete cells are performed to analyze those effects. The influence of surface roughness on the theorical effective space charge region and diffusion length is based on a simple theoretical model. This paper discusses the comparison of CIGSe solar cells with n-i-p structures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Charge transfer of single laser crystallized intrinsic and phosphorus-doped Si-nanocrystals visualized by Kelvin probe force microscopy

Isolated intrinsic and phosphorus doped (P-doped) Si-nanocrystals (Si-NCs) on n- and p-Si substrates are fabricated by excimer laser crystallization techniques. The formation of Si-NCs is confirmed by atomic force microscopy (AFM) and conductive AFM measurements. Kelvin probe force microscopy (KPFM) is then carried out to visualize the trapped charges in a single Si-NC dot which derives from the charge transfer between Si-NCs and Si substrates due to their different Fermi levels. The laser crystallized P-doped Si-NCs have a similar Fermi level around the mid-gap to the intrinsic counterparts, which might be caused by the inactivated impurity atoms or the surface states-related Fermi level pinning. A clear rise of the Fermi level in P-doped Si-NCs is observed after a short time thermal annealing treatment, indicating the activation of dopants in Si-NCs. Moreover, the surface charge quantity can be estimated using a simple parallel plate capacitor model for a quantitative understanding of the KPFM results at the nanoscale.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Spectroscopic signatures of proton transfer dynamics in the water dimer cation

Using full dimensional EOM-IP-CCSD/aug-cc-pVTZ potential energy surfaces, the photoelectron spectrum, vibrational structure, and ionization dynamics of the water dimer radical cation, (H2O)+2, were computed. We also report an experimental photoelectron spectrum which is derived from photoionization efficiency measurements and compares favorably with the theoretical spectrum. The vibrational structure is also compared with the recent experimental work of Gardenier et al. [J. Phys. Chem. A 113, 4772 (2009)] and the recent theoretical calculations by Cheng et al. [J. Phys. Chem. A 113 13779 (2009)]. A reduced dimensionality nuclear Hamiltonian was used to compute the ionization dynamics for both the ground state and first excited state of the cation. The dynamics show markedly different behavior and spectroscopic signatures depending on which state of the cation is accessed by the ionization. Ionization to the ground-state cation surface induces a hydrogen transfer which is complete within 50 femtoseconds, whereas ionization to the first excited state results in a much slower process.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Observation of band splitting and magnetically induced band structure reconstruction in TbTi 3 ⁢Bi 4

The magnetic kagome materials are a promising platform to study the interplay between magnetism, topology, and correlated electronic phenomena. Among these materials, the 𝑅⁢Ti 3 ⁢Bi 4 family received a great deal of attention recently because of its chemical versatility and wide range of magnetic properties. Here, we use angle-resolved photoemission spectroscopy measurements and density functional theory calculations to investigate the electronic structure of TbTi 3 ⁢Bi 4 in paramagnetic and antiferromagnetic phases. Our experimental results show the presence of unidirectional band splitting of unknown nature in both phases. In addition, we observed a complex reconstruction of the band structure in the antiferromagnetic phase. Furthermore, some aspects of this reconstruction are consistent with effects of additional periodicity introduced by the magnetic ordering vector, while the nature of several other features remains unknown.

Angle-resolved photoemission spectroscopy↗

The Soil Moisture Active and Passive Mission (SMAP): Science and Applications

The Soil Moisture Active and Passive mission (SMAP) will provide global maps of soil moisture content and surface freeze/thaw state. Global measurements of these variables are critical for terrestrial water and carbon cycle applications. The SMAP observatory consists of two multipolarization L-band sensors, a radar and radiometer, that share a deployable-mesh reflector antenna. The combined observations from the two sensors will allow accurate estimation of soil moisture at hydrometeorological (10 km) and hydroclimatological (40 km) spatial scales. The rotating antenna configuration provides conical scans of the Earth surface at a constant look angle. The wide-swath (1000 km) measurements will allow global mapping of soil moisture and its freeze/thaw state with 2-3 days revisit. Freeze/thaw in boreal latitudes will be mapped using the radar at 3 km resolution with 1-2 days revisit. The synergy of active and passive observations enables measurements of soil moisture and freeze/thaw state with unprecedented resolution, sensitivity, area coverage and revisit.

radiometry↗

Importance of the Fermi-surface topology to the superconducting state of the electron-doped pnictide Ba(Fe 1-x Co x )₂As₂

We used angle-resolved photoemission spectroscopy and thermoelectric power to study the poorly explored, highly overdoped side of the phase diagram of Ba(Fe 1-x Co x )₂As₂ high-temperature superconductor. Our data demonstrate that several Lifshitz transitions—topological changes of the Fermi surface—occur for large x. The central hole barrel changes to ellipsoids that are centered at Z at x~0.11 and subsequently disappear around x~0.2; changes in thermoelectric power occur at similar x values. T c decreases and goes to zero around x~0.15—between the two Lifshitz transitions. Beyond x=0.2 the central pocket becomes electron-like and superconductivity does not exist. Our observations reveal the importance of the underlying Fermiology in electron-doped iron arsenides. We speculate that a likely necessary condition for superconductivity in these materials is the presence of the central hole pockets rather than nesting between central and corner pockets.

Liu, Chang↗

Mechanical Surface Treatments of AISI 304 Stainless Steel: Effects on Surface Microrelief, Residual Stress, and Microstructure

The surface roughness, residual stress, and microstructure of AISI 304 stainless steel specimens after laser shock peening (LSP), water jet cavitation peening (WjCP), water jet shot peening (WjSP), and multi-pin ultrasonic impact treatment (UIT) were studied in this work. Compared to the initial state, the surface roughness (Ra) was, respectively, decreased by approx. 5.5, 7.8, 38.2, and 91.1% after the LSP, WjCP, WjSP, and UIT processes. The volume fraction of ε-martensite of ~ 3-5% was observed in all treated specimens except for the LSP-treated ones. The volume fraction of α′-martensite was increased in the following sequence: WjCP (~ 5%), LSP (~ 5%), WjSP (~ 25%), UIT (~ 50%). The studied mechanical surface treatments promote a significant reduction in grains size of both austenite (~ 15-20 nm) and martensite (~ 20-37 nm) leading to essential hardening. All studied processes result in the formation of compressive residual stresses (− 377…693 MPa) and the improvement in the bearing curve parameters. The microhardness estimated accounting for the contributions of different hardening mechanisms to the yield strength magnitude correlates well with the experimental data. The grain boundary hardening and dislocation hardening are concluded to be the most influential mechanisms.

36 MATERIALS SCIENCE↗

Confronting Weather and Climate Models with Observational Data from Soil Moisture Networks over the United States

Four land surface models in uncoupled and coupled configurations are compared to observations of daily soil moisture from 19 networks in the conterminous United States to determine the viability of such comparisons and explore the characteristics of model and observational data. First, observations are analyzed for error characteristics and representation of spatial and temporal variability. Some networks have multiple stations within an area comparable to model grid boxes; for those it is found that aggregation of stations before calculation of statistics has little effect on estimates of variance, but soil moisture memory is sensitive to aggregation. Statistics for some networks stand out as unlike those of their neighbors, likely because of differences in instrumentation, calibration, and maintenance. Buried sensors appear to have less random error than near-field remote sensing techniques, and heat-dissipation sensors show less temporal variability than other types. Model soil moistures are evaluated using three metrics: standard deviation in time, temporal correlation (memory), and spatial correlation (length scale). Models do relatively well in capturing large-scale variability of metrics across climate regimes, but they poorly reproduce observed patterns at scales of hundreds of kilometers and smaller. Uncoupled land models do no better than coupled model configurations, nor do reanalyses outperform free-running models. Spatial decorrelation scales are found to be difficult to diagnose. Using data for model validation, calibration, or data assimilation from multiple soil moisture networks with different types of sensors and measurement techniques requires great caution. Finally, data from models and observations should be put on the same spatial and temporal scales before comparison.

54 ENVIRONMENTAL SCIENCES↗

Investigation of Electrocatalytic CO 2 Reduction on MXene Materials via First-Principles Simulations

Computational studies of CO 2 reduction to yield various products were carried out on the basal plane and edges of different MXene materials. The impact of vacancies upon Mo 2 TiC 2 T x , W 2 TiC 2 T x , and Ti 3 C 2 T x (T x = O and OH) was also examined for both edge and basal sites. Initial calibrations were carried out to generate surfaces with optimal oxide/hydroxide ratios and proper termination sites upon which various vacancy sites were explored to ensure an accurate model of the surfaces’ resting states. From this work, Mo 2 TiC 2 O was determined to exhibit the lowest theoretical overpotential for methane as determined by volcano plot analyses. At a large enough vacancy concentration, the CO 2 reduction reaction (CO 2 RR) is predicted to outcompete the hydrogen evolution reaction (HER) as the predominant reaction on the surface. In conclusion, when examining the edge of Mo 2 TiC 2 O, stronger CO 2 binding was exhibited to such an extent that the reaction was predicted to terminate after the generation of formate on the edge.

Lund, Colton [Argonne National Laboratory (ANL), A↗

Molecular dynamics simulations of Cl{sup +} etching on a Si(100) surface

Molecular dynamics simulations using improved Tersoff-Brenner potential parameters were performed to investigate Cl{sup +} etching of a {l_brace}2x1{r_brace} reconstructed Si(100) surface. Steady-state Si etching accompanying the Cl coverage of the surface is observed. Furthermore, a steady-state chlorinated reaction layer is formed. The thickness of this reaction layer is found to increase with increasing energy. The stoichiometry of SiCl{sub x} species in the reaction layer is found to be SiCl:SiCl{sub 2}:SiCl{sub 3}=1.0:0.14:0.008 at 50 eV. These results are in excellent agreement with available experimental data. While elemental Si products are created by physical sputtering, most SiCl{sub x}(0<x<4) etch products are produced by chemical-enhanced physical sputtering.

36 MATERIALS SCIENCE↗