Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “spin dynamics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,621 records · Page 90

Toward a High-Efficient Utilization of Solar Radiation by Quad-Band Solar Spectral Splitting

The promising quad-band solar spectral splitter incorporates the properties of the optical filter and the spectrally selective solar thermal absorber can direct PV band to PV modules and absorb thermal band energy for thermal process with low thermal losses. Finally, it provides a new strategy for spectral splitting and offers potential ways for hybrid PVT system design.

14 SOLAR ENERGY↗

Nanocomposites from Solution-Synthesized PbTe-BiSbTe Nanoheterostructure with Unity Figure of Merit at Low-Medium Temperatures (500-600 K)

The large-scale implementation of thermoelectric devices is inhibited, in part, by the limited temperature range where each material can operate at its highest efficiency, as evaluated by the dimensionless figure of merit ( zT = S 2 σT/κ ). To date, Bi 2 Te 3 -based materials have been restricted to zT ≥ 1 between 300-500 K, before the onset of bipolar conduction reduces the zT significantly. Herein, we show that a scalable, low-temperature solution process method can be used to synthesize precursor material for Pb-doped Bi x Sb 2-x Te 3 bulk nanocomposites with a zT = 1 over the 500-600 K range, making this material suitable for low-grade waste heat recovery for the first time. Our success in increasing the efficiency of p-type Bi x Sb 2-x Te 3 at higher temperatures can be largely explained by the increase in the optical band gap, according to the Burstein-Moss shift, due to Pb doping, thus delaying the onset of bipolar conduction. Furthermore, the solution synthesis method enabled controlled nanostructuring of the bulk materials, which greatly reduced the thermal conductivity over the investigated temperature range. Lastly, our scalable synthesis processing method may be applicable to not only other thermoelectrics, but also in fields such as photocatalysis, electronics and optoelectronics.

36 MATERIALS SCIENCE↗

Lattice Dislocations Enhancing Thermoelectric PbTe in Addition to Band Convergence

Phonon scattering by nanostructures and point defects has become the primary strategy for minimizing the lattice thermal conductivity (κ L ) in thermoelectric materials. However, these scatterers are only effective at the extremes of the phonon spectrum. Recently, it has been demonstrated that dislocations are effective at scattering the remaining mid-frequency phonons as well. In this work, by varying the concentration of Na in Pb 0.97 Eu 0.03 Te, it has been determined that the dominant microstructural features are point defects, lattice dislocations, and nanostructure interfaces. This study reveals that dense lattice dislocations (≈4 × 10 12 cm -2 ) are particularly effective at reducing κ L . When the dislocation concentration is maximized, one of the lowest κ L values reported for PbTe is achieved. Furthermore, due to the band convergence of the alloyed 3% mol. EuTe the electronic performance is enhanced, and a high thermoelectric figure of merit, zT, of ≈2.2 is achieved. This work not only demonstrates the effectiveness of dense lattice dislocations as a means of lowering κL, but also the importance of engineering both thermal and electronic transport simultaneously when designing high-performance thermoelectrics.

36 MATERIALS SCIENCE↗

Electrically Pumped Whispering Gallery Mode Lasing from Au/ZnO Microwire Schottky Junction

Au/ZnO microwire Schottky diodes are fabricated. The devices exhibit typical Schottky diode I – V behavior with a turn‐on voltage of about 0.72 V. The hexagonal ZnO microwires act as whispering gallery mode (WGM) lasing microcavities. Under forward bias, a three‐microwire device exhibits WGM ultraviolet lasing spectra with a quality factor of about 1287. Output power of the laser has been measured at various injection currents, indicating threshold behavior with a threshold current of about 59 mA. Due to limited hole injection in the operation of Schottky diode, the lasing is a result of an excitonic recombination within the WGM cavity.

Bashar, Sunayna B.↗

Enhanced Thermoelectric Properties for PEDOT:PSS/Undoped Ge Thin-Film Bilayered Heterostructures

Modulation doping is one of the strategies to improve thermoelectric power factors of nanocomposites and thin-film bilayered heterostructures by effectively increasing electrical conductivity. Here, it is reported that thin-film heterostructures of heavily doped p-type organic conducting polymer, poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) and undoped thin-film Ge can enhance thermoelectric power factor by modulation doping. The maximum power factor and Seebeck coefficient of the bilayered heterostructures are 154 µW m -1 K -2 and 398 µV K -1 , respectively, corresponding to 47-fold and 41-fold increases compared to those of bulk PEDOT:PSS and 64-fold increase compared to power factor of undoped Ge. The enhancements in power factor and Seebeck coefficient are quantitatively described by the hole transfer from PEDOT:PSS to Ge, which takes into account the band alignment at the interface detected by Kraut's method. Agreement between the simulation and experiment results also implies predictability of thermoelectric performances of nanoscale bilayered heterostructures in general, when band offset, Fermi level, and individual electronic properties are available. This work can be further extended to predict performance of other nanoscale combinations of thermoelectric and other electronic materials in general.

charge transport↗

Ultrafast Control of Interfacial Exchange Coupling in Ferromagnetic Bilayer

Fast spin manipulation in magnetic heterostructures, where magnetic interactions between different materials often define the functionality of devices, is a key issue in the development of ultrafast spintronics. Although recently developed optical approaches such as ultrafast spin-transfer and spin–orbit torques open new pathways to fast spin manipulation, these processes do not fully utilize the unique possibilities offered by interfacial magnetic coupling effects in ferromagnetic multilayer systems. Here, ultrafast optically controlled interfacial exchange interactions in the ferromagnetic Co 2 FeAl/(Ga,Mn)As system at low laser fluence levels are experimentally demonstrated. The excitation efficiency of Co 2 FeAl with the (Ga,Mn)As layer is 30–40 times higher than the case with the GaAs layer at 5 K due to the modification of exchange coupling interaction via photoexcited charge transfer between the two ferromagnetic layers. In addition, the coherent spin precessions persist to room temperature, excluding the drive of pump-modulated magnetization in the (Ga,Mn)As layer and indicating a proximity-effect-related optical excitation mechanism. The results highlight the importance of interfacial exchange interactions in ferromagnetic heterostructures and how these magnetic coupling effects can be utilized for ultrafast, low-power spin manipulation.

36 MATERIALS SCIENCE↗

Skutterudite Unicouple Characterization for Energy Harvesting Applications

Skutterudites are enticing thermoelectric materials due to their high figure of merit, ZT, and good thermomechanical properties. Our work reports the effective figure of merit, ZT eff , and the efficiency of skutterudite legs and a unicouple working under a large temperature difference. The p- and n-type legs are fabricated with electrodes sintered directly to the skutterudite during a hot pressing process. CoSi 2 is used as the electrode for the n-type skutterudite (Yb 0.35 Co 4 Sb 12 ) and Co2Si for the p-type skutterudite (NdFe 3.5 Co 0.5 Sb 12 ). A technique is developed to measure the ZT eff of individual legs and the efficiency of a unicouple. An ZT eff of 0.74 is determined for the n-type legs operating between 52 and 595 °C, and an ZT eff of 0.51 for the p-type legs operating between 77 and 600 °C. The efficiency of the p–n unicouple is determined to be 9.1% operating between ~70 and 550 °C.

30 DIRECT ENERGY CONVERSION↗

Enhancement of Thermoelectric Performance of n-Type PbSe by Cr Doping with Optimized Carrier Concentration

Ti, V, Cr, Nb, and Mo are found to be effective at increasing the Seebeck coefficient and power factor of n-type PbSe at temperatures below 600 K. It is found that the higher Seebeck coefficients and power factors are due to higher Hall mobility ≈1000 cm 2 V -1 s -1 at lower carrier concentration. A larger average ZT value (relevant for applications) can be obtained by an optimization of carrier concentration to ≈10 18 -10 19 cm -3 . Even though the highest room temperature power factor ≈3.3 × 10 -3 W m -1 K -2 is found in 1 at% Mo-doped PbSe, the highest ZT is achieved in Cr-doped PbSe. Combined with the lower thermal conductivity, ZT is improved to ≈0.4 at room temperature and peak ZTs of ≈1.0 are observed at ≈573 K for Pb 0.9925 Cr 0.0075 Se and ≈673 K for Pb 0.995 Cr 0.005 Se. Finally, the calculated device efficiency of Pb 0.995 Cr 0.005 Se is as high as ≈12.5% with cold side 300 K and hot side 873 K, higher than those of all the n-type PbSe materials reported in the literature.

36 MATERIALS SCIENCE↗