Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “solid state physics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,621 records · Page 90

Polymorphism of ScBO{sub 3} at the Solid Phase Synthesis from Amorphous Precursors

Detailed X-ray studies of changes in the structure of the scandium orthoborate ScBO{sub 3} in the process of serial isothermal annealing of the initial charge in the form of amorphous precursor were carried out. It was shown that upon successive annealing of the amorphous precursor, the crystalline phase first forms at an annealing temperature of 710°C, the positions of the reflections of which do not coincide with the positions that of the known calcite structure. This phase exists in a very narrow temperature range (≈30°C) and, when the annealing temperature is increased to 750°C, it completely transfers to the known rhombohedral phase of calcite. Using the ENDEAVOR software, the cell parameters, atom positions in the cell, and the spatial symmetry group of the new phase were determined. It turned out that the new phase corresponds to the hexagonal structure of the faterite (S.G. P63/mmc), known for other orthoborates of rare-earth elements (REE).

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Chemical pressure effects on structural, dielectric and magnetic properties of solid solutions Mn{sub 3−x}Co{sub x}TeO{sub 6}

Highlights: • Mn{sub 3}TeO{sub 6} and Co{sub 3}TeO{sub 6} are antiferromagnets with corundum related structures. • The structural and magnetic properties of Mn{sub 3−x}Co{sub x}TeO{sub 6} ceramics were investigated. • All compounds adopt the trigonal structure of Mn{sub 3}TeO{sub 6} up to at least x = 2.4. • The antiferromagnetic transition temperature monotonously increases with x. • NPD data evidences the magnetic structure of the Mn{sub 3−x}Co{sub x}TeO{sub 6} ceramics. - Abstract: The effects of Co{sup 2+} doping on the structural, magnetic and dielectric properties of the multiferroic frustrated antiferromagnet Mn{sub 3}TeO{sub 6} have been investigated. Ceramic samples of the solid solution series Mn{sub 3−x}Co{sub x}TeO{sub 6} were prepared by a solid-state reaction route. X-ray and neutron powder diffraction and electron microscopy techniques were combined with calorimetric, dielectric and magnetic measurements to investigate the dependence of the crystal structure and physical properties on temperature and composition. It is shown that the compounds with x ≤ 2.4 adopt the trigonal corundum-related structure of pure Mn{sub 3}TeO{sub 6} (space group R3{sup ¯}) in the temperature range 5–295 K and that the lattice parameters a and c and the unit-cell volume V decrease linearly with increasing Co{sup 2+} concentration. The low-temperature magnetic susceptibility and heat capacity data evidence the antiferromagnetic ordering of all samples. The Neel temperature linearly increases with Co{sup 2+} concentration x. Curie–Weiss fits of the high temperature susceptibility indicate that the magnetic frustration decreases with x. The derived magnetic structure of Mn{sub 3}TeO{sub 6} can be described as an incommensurately modulated magnetic spin state with k = [0, 0, k{sub z}] and an elliptical spin-spiral order of spins within the chains of MnO{sub 6} octahedra. With increasing Co{sup 2+} concentration the propagation vector k{sub z} changes from 0.453 (x = 0) to 0.516 (x = 2.4). The magnetic anisotropy changes as well, leading to a reorientation of the spiral-basal plane. A possible coexistence of long-range order of electrical dipoles and magnetic moments in Mn{sub 3−x}Co{sub x}TeO{sub 6} is discussed.

36 MATERIALS SCIENCE↗

Recovery effects due to the interaction between nuclear and electronic energy losses in SiC irradiated with a dual-ion beam

Single and dual-beam ion irradiations of silicon carbide (SiC) were performed to study possible Synergetic effects between Nuclear (S{sub n}) and Electronic (S{sub e}) Energy Losses. Results obtained combining Rutherford backscattering in channeling conditions, Raman spectroscopy, and transmission electron microscopy techniques show that dual-beam irradiation of SiC induces a dramatic change in the final sample microstructure with a substantial decrease of radiation damage as compared to single-beam irradiation. Actually, a defective layer containing dislocations is formed upon dual-beam irradiation (S{sub n} and S{sub e}), whereas single low-energy irradiation (S{sub n} alone) or even sequential (S{sub n} + S{sub e}) irradiations lead to full amorphization. The healing process is ascribed to the electronic excitation arising from the electronic energy loss of swift ions. These results shed new light on the long-standing puzzling problem of the existence of a possible synergy between S{sub n} and S{sub e} in ion-irradiation experiments. This work is interesting for both fundamental understanding of the ion-solid interactions and technological applications in the nuclear industry where recovery S{sub n}/S{sub e} effects may preserve the integrity of nuclear devices.

36 MATERIALS SCIENCE↗

Physical and absorption properties of titanium nanoparticles incorporated into zinc magnesium phosphate glass

We report the influences of Titania (TiO{sub 2}) nanoparticles (NPs) on the physical and optical properties of melt quench synthesized zinc magnesium phosphate glasses. Five glass samples with composition (42 − x)P{sub 2}O{sub 5}–50ZnO–8MgO–xTiO{sub 2}, where x = 0, 1, 2, 3, 4 mol% are prepared and characterized. XRD pattern verified the amorphous nature of all samples. TEM images manifested the growth of Ti NPs of average size ≈ 5.78 nm. TiO{sub 2} NP concentration dependent variation in the physical properties including glass density, molar volume, molar refractivity, electronic polarizability and ionic packing density are determined. The values of glass refractive indices, density and ionic packing density are increased with the increase of TiO{sub 2} NP contents. Conversely, the Urbach energy, direct and indirect optical band gap are found to decrease with the increase of TiO{sub 2} NP concentration. These glass compositions may be potential for various solid state devices including laser. - Highlights: • TiO{sub 2} NP embedded self-cleaning phosphate glass are synthesized for the first time. • Well dispersed and uniform sized TiO{sub 2} NPs are grown. • Absorption spectra revealed prominent peak in the UV region. • TiO{sub 2} NPs strongly influenced the physical and absorption features of synthesized glasses. • The effects of TiO{sub 2} NPs on the physical and optical properties of these glasses are determined.

36 MATERIALS SCIENCE↗

On the Role of Friction and Particle Size Distribution in Granular Packings

Packing of particles in a disordered arrangement has tremendous significance in both condensed matter physics and engineering applications. The last three decades have seen remarkable progress in our understanding of the physics of granular packings that has been largely facilitated by a rapid growth in the power of modern computers. Although granular packings are ubiquitous in diverse natural settings, from clogging of powders in hoppers to the crowding of living cells, a significant motivation for modeling granular packings has emerged from a proposal that the transition from a fluid-like state to a solid-like state of a granular material upon increasing volume fraction, called jamming, is intimately related to the origins of glass transition in thermal systems. As such, a majority of modeling efforts have focused on the jamming behavior of an idealized granular material: frictionless, monodisperse sphere. While such studies have illuminated the rich physics of jamming, granular materials in nature and engineering practice are rarely frictionless or monodisperse. The analogous research on the packing of these ‘real-world’ granular materials is still not fully developed. Besides requiring the exploration of a huge parameter space, three key computational considerations have inhibited their modeling: (i) traditional computational methods are not adept at simulating mechanically-stable packings of frictional particles near the jamming transition; (ii) standard algorithms of contact detection in discrete element methods are impractical to simulate granular packings with a wide distribution of particle sizes; (iii) a lack of well-established contact mechanics models of friction that can accurately reproduce experimental data. This chapter will review the latest computational advances to simulate the jamming of size-dispersed frictional particles, and describe the rich microstructural diversity that emerges in their packings.

granular↗

Proton transport in ice at 30–140 K: Effects of porosity

We examined the role of porosity, a crucial characteristic of amorphous solid water (ASW), on electrostatic charging and discharging of ASW films with 500 eV He{sup +} and Xe{sup +} ions, by measuring the surface potentials with a Kelvin probe. When a charged ASW film is heated, its surface potential decreases sharply, at temperatures that depend on the maximum temperature the film was once subject to. This sharp decrease of the surface potential is not due to a large thermally induced increase of the dielectric constant ε as proposed in other studies, since measurements of ε yielded a value of ∼3 below ∼100 K. Rather, the potential drop can be explained by the transport of the surface charge to the substrate, which depends on film porosity. We propose that the charge migrates along the walls of the pores within the ASW film, facilitated by the thermally induced reorientation of the incompletely coordinated molecules on the pore walls.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Nonlinear delayed symmetry breaking in a solid excited by hard x-ray free electron laser pulses

We have studied the ultrafast changes of electronic states in bulk ZnO upon intense hard x-ray excitation from a free electron laser. By monitoring the transient anisotropy induced in an optical probe beam, we observe a delayed breaking of the initial c-plane symmetry of the crystal that lasts for several picoseconds. Interaction with the intense x-ray pulses modifies the electronic state filling in a manner inconsistent with a simple increase in electronic temperature. These results may indicate a way to use intense ultrashort x-ray pulses to investigate high-energy carrier dynamics and to control certain properties of solid-state materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ultrafast Graphene Light Emitters

Ultrafast electrically driven nanoscale light sources are critical components in nanophotonics. Compound semiconductor-based light sources for the nanophotonic platforms have been extensively investigated over the past decades. However, monolithic ultrafast light sources with a small footprint remain a challenge. Here in this paper, we demonstrate electrically driven ultrafast graphene light emitters that achieve light pulse generation with up to 10 GHz bandwidth across a broad spectral range from the visible to the near-infrared. The fast response results from ultrafast charge-carrier dynamics in graphene and weak electron-acoustic phonon-mediated coupling between the electronic and lattice degrees of freedom. We also find that encapsulating graphene with hexagonal boron nitride (hBN) layers strongly modifies the emission spectrum by changing the local optical density of states, thus providing up to 460% enhancement compared to the gray-body thermal radiation for a broad peak centered at 720 nm. Furthermore, the hBN encapsulation layers permit stable and bright visible thermal radiation with electronic temperatures up to 2000 K under ambient conditions as well as efficient ultrafast electronic cooling via near-field coupling to hybrid polaritonic modes under electrical excitation. These high-speed graphene light emitters provide a promising path for on-chip light sources for optical communications and other optoelectronic applications.

36 MATERIALS SCIENCE↗

Goldstone-like states in a layered perovskite with frustrated polarization : a first-principles investigation of PbSr{sub 2}Ti{sub 2}o{sub 7}.

With the help of first-principles-based computational techniques, we demonstrate that Goldstone-like states can be artificially induced in a layered-perovskite ferroelectric compound with frustrated polarization, resulting in the emergence of a variety of interesting physical properties that include large, tunable dielectric constants and an ability to easily form vortex polar states in a nanodot geometry. In a similar fashion to the well-known perovskite materials with morphotropic phase boundaries (MPBs), these states manifest themselves as polarization rotations with almost no energy penalty, suggesting that the existence of an MPB is actually yet another manifestation of the Goldstone theorem in solids.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Specific heat and phonon density of state of cubic phase of protonic conductor LaAlO{sub 3}

Perovskite oxides find wide range of applications like oxygen sensors, catalyst support, high frequency capacitors, high temperature superconducting microwave devices, solid state oxide fuel cell (SOFC) etc. LaAlO{sub 3} is one of such type of prominent perovskite oxides and very prominent material for protonic conductions. Therefore knowledge of the thermal properties of LaAlO{sub 3} is most significant. Hence in the present study we have studied phonon density of states and specific heat of LaAlO{sub 3} in cubic structure by applying lattice dynamical theoretical model. The calculated results are interpreted with existing experimental or theoretical results.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Phase dynamics in the self-modulation oscillation regime in a solid-state ring laser

The dynamics of the phase difference of counterpropagating waves is studied theoretically and experimentally in the self-modulation oscillation regime in a solid-state ring laser. It is found that in the case of a small enough frequency nonreciprocity of the ring resonator, the phase difference of counterpropagating waves changes within a limited range, performing periodic oscillations with the intensity self-modulation frequency. The instant frequency difference of counterpropagating waves also changes periodically in time; however, its mean value is zero (the frequency locking for counterpropagating waves takes place). The width of the frequency locking region is measured. It is shown that the phase difference of the coupling coefficients considerably affects the phase dynamics. This opens up new possibilities for determining the phase difference of coupling coefficients of counterpropagating waves. (control of laser radiation parameters)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Dielectric Aging and Dielectric Degradation (Breakdown) of Polymer Films in AC Electric Fields

An explanation is proposed for the difference of the electric-strength properties of polymers in dc and ac electric fields. The energy release upon the recombination of electrons and holes injected into a polymer dielectric is considered as a factor accelerating the processes of electric aging of these dielectrics in an ac electric field. It is shown that the nonradiative relaxation of electron excited states, which causes the bond scission in macromolecules and the formation of free radicals, leads to the formation of deep electron traps in the polymer dielectric; as a result, the macromolecule ionization in an electric field is accelerated due to the transition of electrons into these traps. In the solid-state plasma, screening effect, which decreases the molecule ionization potential, appears. As a result, the macromolecule ionization rate, i.e., the rate of charge carrier formation, increases, which leads to a decrease in the lifetime of a polymer dielectric in an ac electric field as compared to the polymer lifetime in a dc electric field.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

High pressure elastic properties of minerals from ab initio simulations: The case of pyrope, grossular and andradite silicate garnets

A computational strategy is devised for the accurate ab initio simulation of elastic properties of crystalline materials under pressure. The proposed scheme, based on the evaluation of the analytical stress tensor and on the automated computation of pressure-dependent elastic stiffness constants, is implemented in the CRYSTAL solid state quantum-chemical program. Elastic constants and related properties (bulk, shear and Young moduli, directional seismic wave velocities, elastic anisotropy index, Poisson's ratio, etc.) can be computed for crystals of any space group of symmetry. We apply such a technique to the study of high-pressure elastic properties of three silicate garnet end-members (namely, pyrope, grossular, and andradite) which are of great geophysical interest, being among the most important rock-forming minerals. The reliability of this theoretical approach is proved by comparing with available experimental measurements. The description of high-pressure properties provided by several equations of state is also critically discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Key role of antibonding electron transfer in bonding on solid surfaces

The description of the chemical bond between a solid surface and an atom or a molecule is the fundamental basis for understanding surface reactivity and catalysis. Despite considerable research efforts, the physics that rules the strength of such chemical bonds remains elusive, especially on semiconductor surfaces. Widespread understandings are mostly based on the degree of filling of antibonding surface-adsorbate states that weaken the surface adsorption. The unoccupied antibonding surface-adsorbate states are often considered to have no effects on surface bonding. Here in this paper, we show that the energy levels of unoccupied antibonding surface-adsorbate states relative to the Fermi-level play a critical role in determining the trends in variations of surface adsorption energies. The electrons that would occupy those high-energy antibonding states are transferred to the Fermi-level, leading to an energy gain that largely controls surface bonding. To illustrate this picture, as a validating case, we study the hydrogen evolution reaction (HER) catalyzed by MoS 2 from density functional theory calculations. We find that the majority of antibonding surface-hydrogen states are positioned well above the Fermi-energy. A clear linear relationship between the energy gain from antibonding electron transfer and the adsorption energy is identified for hydrogen binds to either molybdenum or sulfur atoms at different sites. The antibonding-electron transfer energy can thus serve as a primary catalytic activity descriptor. The emerging picture identifies the origin of HER on MoS 2 , which is related to the empty in-gap states induced by sulfur vacancies or edges. Under this picture, the effects of surface inhomogeneity (e.g., defects, step edges) on surface bonding strength can be understood. This antibonding electron transfer picture also offers a physically different explanation for the well-known d-band theory for hydrogen adsorption on transition metal surfaces. The results provide guidelines for understanding and optimizing catalyst performance and designing new solid catalysts.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Atomic- and Molecular-Scale Interphase Engineering for High-Performance Solid-State Batteries

Solid-state batteries (SSBs) promise a decisive advance beyond conventional Li-ion systems, yet their development remains constrained by persistent solid–solid interfacial instabilities that degrade performance and durability. Interfaces between solid electrolytes and both cathodes and Li metal often exhibit poor wettability, limited physical contact, and high charge–transfer resistance, leading to chemical decomposition, mechanical failure, and impedance growth. Overcoming these limitations requires interphase engineering with atomic-scale precision—capabilities that conventional coating methods cannot reliably deliver. Atomic layer deposition (ALD) and molecular layer deposition (MLD) uniquely meet this need by enabling ultrathin, conformal, and composition-tunable films that stabilize reactive surfaces, suppress parasitic reactions, and regulate Li-metal morphology. Importantly, this Perspective highlights ALD/MLD systems that have already demonstrated effectiveness in liquid-electrolyte cells and discusses how these validated strategies can be deliberately translated to solid-state architectures. By grounding future directions in experimentally proven concepts rather than speculative hypotheses, we outline how atomic- and molecular-scale design principles can accelerate the development of robust, high-performance SSB technologies.

atomic and molecular layer deposition↗