Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “shear flow”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,621 records · Page 90

Sensor for Direct Measurement of the Boundary Shear Stress in Fluid Flow

The formation of scour patterns at bridge piers is driven by the forces at the boundary of the water flow. In most experimental scour studies, indirect processes have been applied to estimate the shear and normal stress using measured velocity profiles. The estimations are based on theoretical models and associated assumptions. However, the turbulence flow fields and boundary layer in the pier-scour region are very complex. In addition, available turbulence models cannot account accurately for the bed roughness effect. Direct measurement of the boundary shear and normal stress and their fluctuations are attractive alternatives. However, this approach is a challenging one especially for high spatial resolution and high fidelity measurements. The authors designed and fabricated a prototype miniature shear stress sensor including an EDM machined floating plate and a high-resolution laser optical encoder. Tests were performed both in air as well as operation in water with controlled flow. The sensor sensitivity, stability and signal-to-noise level were measured and evaluated. The detailed test results and a discussion of future work will be presented in this paper.

shear stress↗

The excitation of geodesic acoustic mode flows by a resonant magnetic field and by resonant heating

Toroidal magnetohydrodynamic (MHD) simulations demonstrate that sheared poloidal flows in tokamaks can be generated by the resonant excitation of the geodesic acoustic mode (GAM). Poloidal flows are generated by two resonant excitation methods: oscillating currents in an external coil and an oscillating heat source. The coil current and the heat source oscillate in time at the local GAM frequency. The sheared poloidal flow generated by the excitation of the GAM may be useful for the suppression of plasma instabilities.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Time and flow-direction responses of shear-styress-sensitive liquid crystal coatings

Time and flow-direction responses of shear-stress liquid crystal coatings were exploresd experimentally. For the time-response experiments, coatings were exposed to transient, compressible flows created during the startup and off-design operation of an injector-driven supersonic wind tunnel. Flow transients were visualized with a focusing schlieren system and recorded with a 100 frame/s color video camera.

Reda, Daniel C.↗

Sensor for Direct Measurement of the Boundary Shear Stress in Fluid Flow

The formation of scour patterns at bridge piers is driven by the forces at the boundary of the water flow. In most experimental scour studies, indirect processes have been applied to estimate the shear and normal stress using measured velocity profiles. The estimations are based on theoretical models and associated assumptions. However, the turbulence flow fields and boundary layer in the pier-scour region are very complex. In addition, available turbulence models cannot account accurately for the bed roughness effect. Direct measurement of the boundary shear and normal stress and their fluctuations are attractive alternatives. However, this approach is a challenging one especially for high spatial resolution and high fidelity measurements. The authors designed and fabricated a prototype miniature shear stress sensor including an EDM machined floating plate and a high-resolution laser optical encoder. Tests were performed both in air as well as operation in water with controlled flow. The sensor sensitivity, stability and signal-to-noise level were measured and evaluated. The detailed test results and a discussion of future work will be presented in this paper.

sheer stress↗

Anisotropic E × B shearing rate in a magnetic island

We derive the E × B shearing rate associated with vortex flow inside a macroscopic magnetic island (MI) in axisymmetric toroidal geometry. Due to the elongation of the MI and incompressibility of the E × B flow, the shearing rate near X-points is much lower than that near the mid-plane (x-axis of the local Cartesian coordinate) of the MI on the same flux surface. Furthermore, the rate formally vanishes at the X-points where the local poloidal magnetic field associated with the MI stagnates. Here, this calculation of E × B shearing profile and, in particular, minimal E × B shear near the X-points is consistent with the recent experimental finding that turbulence tends to spread into an MI through regions around the X-points and can contribute to more thorough quantitative interpretation of the results from experiments and simulations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Mixing of the Connecticut River Plume During Ambient Flood Tides: Spatial Heterogeneity and Contributions of Bottom–Generated and Interfacial Mixing

The Connecticut River plume is influenced by energetic ambient tides in the Long Island Sound receiving waters. The objectives of this modeling study are (a) characterizing the spatial heterogeneity of turbulent buoyancy fluxes, (b) partitioning turbulent buoyancy fluxes into bottom-generated and interfacial shear contributions, and (c) quantifying contributions to plume-integrated mixing within the tidal plume. The plume formed during ambient flood tides under low river discharge, spring tides, and no winds is analyzed. Turbulent buoyancy fluxes (B) and depth-integrated B through the plume (Bd) are characterized by pronounced spatial heterogeneity. Strong mixing (Bd ~ 10 –5 -10 –4 m 3 /s 3 ) occurs near the mouth, in the nearfield plume turning region, over shoals, and nearshore shallow areas. Low to moderate mixing (Bd ~ 10 –8 -10 –6 m 3 /s 3 ) occupies half the plume. Buoyancy fluxes are first partitioned based on the depth of the shear stress minimum between plume-generated and bottom-generated shear maxima. Four other tested partitioning methods are based on open channel flow and stratified shear flow parameterizations. Interfacial and bottom-generated shear contribute to different areas of intense and moderate mixing. All methods indicate a significant plume mixing role for bottom-generated mixing, but interfacial mixing is a bigger contributor. Plume-integrated total and interfacial mixing peak at max ambient flood and the timing of peak bottom-generated mixing varies among partitioning methods. Two-thirds of the mixing occurs in concentrated intense mixing areas. A parameter space with the ambient tidal Froude number and plume thickness to depth ratio as axes indicates many tidally modulated plumes are moderately to dominantly influenced by bottom-generated tidal mixing.

54 ENVIRONMENTAL SCIENCES↗

Electron-ion hybrid instabilities driven by velocity shear in a magnetized plasma

The stability of a magnetized plasma is investigated in which a sheared electron flow channel is present. The flow's peak velocity and shear scale length are denoted by V and L, respectively. If the velocity channel is perpendicular to the confining magnetic field and L is less than the ion Larmor radius, an electrostatic instability develops whose frequency is on the order of the lower hybrid frequency. It is concluded that velocity shear is the only source of free energy. Further, it is shown that density gradients do not stabilize this mode. It follows that the mode presented in this work can not be identified with the well-known modified two-stream instability. If the velocity channel is parallel to the confining magnetic field and the plasma is weakly magnetized, an instability driven by velocity shear is shown to exist.

Romero, H.↗

Global chaotization of fluid particle trajectories in a sheared two-layer two-vortex flow

In a two-layer quasi-geostrophic approximation, we study the irregular dynamics of fluid particles arising due to two interacting point vortices embedded in a deformation flow consisting of shear and rotational components. The two vortices are arranged within the bottom layer, but an emphasis is on the upper-layer fluid particle motion. Vortices moving in one layer induce stirring of passive scalars in the other layer. This is of interest since point vortices induce singular velocity fields in the layer they belong to; however, in the other layer, they induce regular velocity fields that generally result in a change in passive particle stirring. If the vortices are located at stagnation points, there are three different types of the fluid flow. We examine how properties of each flow configuration are modified if the vortices are displaced from the stagnation points and thus circulate in the immediate vicinity of these points. To that end, an analysis of the steady-state configurations is presented with an emphasis on the frequencies of fluid particle oscillations about the elliptic stagnation points. Asymptotic relations for the vortex and fluid particle zero–oscillation frequencies are derived in the vicinity of the corresponding elliptic points. By comparing the frequencies of fluid particles with the ones of the vortices, relations between the parameters that lead to enhanced stirring of fluid particles are established. It is also demonstrated that, if the central critical point is elliptic, then the fluid particle trajectories in its immediate vicinity are mostly stable making it harder for the vortex perturbation to induce stirring. Change in the type of the central point to a hyperbolic one enhances drastically the size of the chaotic dynamics region. Conditions on the type of the central critical point also ensue from the derived asymptotic relations.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Rossby-Khantadze electromagnetic planetary waves driven by sheared zonal winds in the E-layer ionosphere

Nonlinear simulations of electromagnetic Rossby and Khantadze planetary waves in the presence of a shearless and sheared zonal flows in the weakly ionized ionospheric E-layer are carried out. The simulations show that the nonlinear action of the vortex structures keeps the solitary character in the presence of shearless zonal winds as well as the ideal solutions of solitary vortex in the absence of zonal winds. In the presence of sheared zonal winds, the zonal flows result in breaking into separate multiple smaller pieces. A passively convected scalar field is shown to clarify the transport associated with the vortices. The work shows that the zonal shear flows provide an energy source into the vortex structure according to the shear rate of the zonal winds.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Penn State Lab Testing Fluid-Rock Interaction in Geothermal Reservoirs

This project focused on assessment and discovery of fluid-rock interaction in geothermal reservoirs. We accomplished work in four main areas: 1) fracture formation and the relationship between fluid flow and shear failure, 2) assessment of fracture geometry and fluid permeability using novel acoustic measurements, 3) an improved understanding of how drilling, injection and geothermal production influence local seismicity, and 4) development of process based models for using induced seismicity to assess the critical stress-state in Earth's crust. This submission contains relevant true triaxial granite and shale experiments and associated run sheets accompanied with links to final technical report and presentation project slides.

15 GEOTHERMAL ENERGY↗

Pore-resolved investigation of turbulent open channel flow over a randomly packed permeable sediment bed

Pore-resolved direct numerical simulations are performed to investigate the interactions between streamflow turbulence and groundwater flow through a randomly packed porous sediment bed for three permeability Reynolds numbers, Re K = 2.56 , 5.17 and 8.94, representative of natural stream or river systems. Time–space averaging is used to quantify the Reynolds stress, form-induced stress, mean flow and shear penetration depths, and mixing length at the sediment–water interface (SWI). Here, the mean flow and shear penetration depths increase with Re K and are found to be nonlinear functions of non-dimensional permeability. The peaks and significant values of the Reynolds stresses, form-induced stresses, and pressure variations are shown to occur in the top layer of the bed, which is also confirmed by conducting simulations of just the top layer as roughness elements over an impermeable wall. The probability distribution functions (p.d.f.s) of normalized local bed stress are found to collapse for all Reynolds numbers, and their root-mean-square fluctuations are assumed to follow logarithmic correlations. The fluctuations in local bed stress and resultant drag and lift forces on sediment grains are mainly a result of the top layer; their p.d.f.s are symmetric with heavy tails, and can be well represented by a non-Gaussian model fit. The bed stress statistics and the pressure data at the SWI potentially can be used in providing better boundary conditions in modelling of incipient motion and reach-scale transport in the hyporheic zone.

turbulence simulation↗

Boundary-Layer Flow Simulations Over Ablating Woven Thermal Protection System Material

Spallation is the mechanical removal of small chunks of material gets removed typically due to high shear conditions of the flow field. This reduces the ability of the thermal protection system (TPS) material to protect the spacecraft as well as cause turbulence in the flow causing higher heating rates. In this work, we focus on the material removal through ablation and high shear flow within the boundary layer region of woven TPS material. Woven TPS (WTPS) material is the latest class of material developed by NASA, to be used within the next generation of space flights. They are complex interlocked weaves designed to create a rigid structure that is highly resistant to heat and can be easily designed and tailored for a wide variety of entry environments. Due to material removal resulting from chemical degradation, the structural integrity of TPS material is affected. Spallation occurs when this structurally compromised material is exposed to the high shear flow conditions within the boundary layer. In order to understand the spallation mechanism within WTPS material, we first perform the material removal simulations which occur primarily through oxidation to obtain the microstructure at various stages of degradation. These simulations are performed using the Porous Microstructure Analysis (PuMA) software developed at NASA Ames. The micro-structure geometry used within these simulations were generated artificially to be similar to the 3D weave architecture of MSR-EEV (Mars Sample Return - Earth Entry Vehicle). The various eroded TPS micro-structures are then subjected to the boundary layer flow conditions to obtain critical surface quantities which contribute to the structural failure mechanism such as heat flux, pressure, and shear stress. The direct simulation Monte Carlo (DSMC) methodology is used to perform these simulations in order to accurately capture the strong gradients within the high-temperature boundary layer flow over the intricate geometry of WTPS material. The boundary layer profile is directly taken from the Computational Fluid Dynamics (CFD) simulation and provided as boundary conditions to the DSMC inlet and outlet. Further, the variation of these properties as the microstructure undergoes changes due to oxidation is also investigated. Finally, these quantities are used as input in PuMA to understand the material expansion/compression and strain within the woven TPS geometry and help in developing a comprehensive spallation and structure failure model.

microstructure↗

Boundary-Layer Flow Simulations Over Ablating Woven Thermal Protection System Material

Spallation is the mechanical removal of small chunks of material gets removed typically due to high shear conditions of the flow field. This reduces the ability of the thermal protection system (TPS) material to protect the spacecraft as well as cause turbulence in the flow causing higher heating rates. In this work, we focus on the material removal through ablation and high shear flow within the boundary layer region of woven TPS material. Woven TPS (WTPS) material is the latest class of material developed by NASA, to be used within the next generation of space flights. They are complex interlocked weaves designed to create a rigid structure that is highly resistant to heat and can be easily designed and tailored for a wide variety of entry environments. Due to material removal resulting from chemical degradation, the structural integrity of TPS material is affected. Spallation occurs when this structurally compromised material is exposed to the high shear flow conditions within the boundary layer. In order to understand the spallation mechanism within WTPS material, we first perform the material removal simulations which occur primarily through oxidation to obtain the microstructure at various stages of degradation. These simulations are performed using the Porous Microstructure Analysis (PuMA) software developed at NASA Ames. The micro-structure geometry used within these simulations were generated artificially to be similar to the 3D weave architecture of MSR-EEV (Mars Sample Return - Earth Entry Vehicle). The various eroded TPS micro-structures are then subjected to the boundary layer flow conditions to obtain critical surface quantities which contribute to the structural failure mechanism such as heat flux, pressure, and shear stress. The direct simulation Monte Carlo (DSMC) methodology is used to perform these simulations in order to accurately capture the strong gradients within the high-temperature boundary layer flow over the intricate geometry of WTPS material. The boundary layer profile is directly taken from the Computational Fluid Dynamics (CFD) simulation and provided as boundary conditions to the DSMC inlet and outlet. Further, the variation of these properties as the microstructure undergoes changes due to oxidation is also investigated. Finally, these quantities are used as input in PuMA to understand the material expansion/compression and strain within the woven TPS geometry and help in developing a comprehensive spallation and structure failure model.

microstructure↗

Ion-acoustic vortices in inhomogeneous and dissipative electron-positron-ion quantum magnetoplasmas

Linear and nonlinear properties of quantum ion-acoustic waves are studied in a nonuniform, dissipative quantum plasma (composed of electrons, positrons, and ions) with sheared ion flow parallel to the ambient magnetic field, using the quantum hydrodynamic model. It is shown that the shear ion flow parallel to the external magnetic field can drive the quantum ion-acoustic wave unstable provided |S|k{sub y}>k{sub z}. Stationary solutions of the nonlinear equations that govern the quantum ion-acoustic waves are also obtained. It is found that electrostatic monopolar, dipolar, and vortex street-type solutions can appear in such a plasma. It is observed that the inclusion of positron, quantum statistical, and Bohm potential terms significantly modifies the scale lengths of these nonlinear structures. The relevance of the present investigation with regard to the dense astrophysical environments is also pointed out.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Experimental cavity pressure distributions at supersonic speeds

An investigation was conducted to define pressure distributions for rectangular cavities over a range of free-stream Mach numbers and cavity dimensions. These pressure distributions together with schlieren photographs are used to define the critical values of cavity length-to-depth ratio that separate open type cavity flows from closed type cavity flows. For closed type cavity flow, the shear layer expands over the cavity leading edge and impinges on the cavity floor, whereas for open type cavity flow, the shear layer bridges the cavity. The tests were conducted by using a flat-plate model permitting the cavity length to be remotely varied from 0.5 to 12 in. Cavity depths and widths were varied from 0.5 to 2.5 in. The flat-plate boundary layer approaching the cavity was turbulent and had a thickness of approximately 0.2 in. at the cavity front face for the range of test Mach numbers from 1.5 to 2.86. Presented are a discussion of the results and a complete tabulation of the experimental data.

Stallings, Robert L., Jr.↗