Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “refinement”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,621 records · Page 90

Ordering effects on deformation substructures and strain hardening behavior of a CrCoNi based medium entropy alloy

Here, a CrCoNi based medium entropy alloy with small additions of Ti, Al and Nb (denoted as (CrCoNi) 93 Al 4 Ti 2 Nb) in the as-quenched condition, exhibits tensile properties comparable to those of the equiatomic CrCoNi alloy at room temperature. Dark field transmission electron microscopy (TEM), atomic resolution high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM) together with atom probe tomography (APT) show that spatially-localized long range ordering (LRO) L1 2 domains exist in this alloy. The evolution of deformation substructure with plastic deformation in this alloy was characterized using electron backscatter diffraction (EBSD), electron channeling contrast imaging (ECCI) and STEM based techniques including the recently developed weak beam dark field STEM imaging. Plastic deformation occurs by the slip of a/2<110>dislocations, which are narrowly dissociated into Shockley partial dislocations on {111} slip planes. Their dissociation distances in the (CrCoNi) 93 Al 4 Ti 2 Nb alloy are much smaller than the widths of the corresponding partials in the equiatomic CrCoNi alloy due to one or more of the minor alloying elements (Al, Ti, Nb). Dislocation slip in this alloy has a pronounced planar character. The leading dislocations in slip bands glide as pairs due to the existence of LRO domains. Multipoles were formed through the slip of dislocations with opposite signs on adjacent {111} slip planes. Those multipoles serve as building blocks for the formation of subgrain structures consisting of fine slip bands. The distances between slip bands were continuously refined during plastic deformation and dynamic refinement of slip bands plays a crucial role in strain hardening. The effects of LRO domains on planar dislocation slip, the deactivation of deformation twinning and strain hardening of this alloy are discussed.

36 MATERIALS SCIENCE↗

High Density of Strong yet Deformable Intermetallic Nanorods Leads to an Excellent Room Temperature Strength-Ductility Combination in a High Entropy Alloy

This paper introduces a new microstructural template for high entropy alloys (HEAs), where the face centered cubic (FCC) complex concentrated solid solution is reinforced with a high density of strong, yet deformable, nanorods of an ordered multi-component intermetallic L12 compound. Thermodynamic modeling has been employed to design this HEA with a large L12 volume fraction. Thermo-mechanical processing by isothermal annealing of the conventionally processed bulk cold-rolled alloy directly at precipitation temperatures, has been applied to produce a high density of uniformly distributed L12 nanorods within refined FCC grains, resulting from concomitant recrystallization and discontinuous precipitation processes. The nanorod morphology of the discontinuous L12 product has been established from three-dimensional atom probe tomography. The refined grains result in a complete coverage of the microstructure with discontinuously precipitated intermetallic nanorods. This nanorod strengthened HEA exhibits an exceptionally high room temperature yield strength of ~1630 MPa, good tensile ductility of ~15%, and an ultimate tensile strength of ~1720 MPa. Furthermore, a single L12 phase alloy, melted based on the precipitate composition in the two-phase FCC + L12 HEA, exhibits very high compressive deformability and strain hardenability, unusual for ordered intermetallic compounds. These results open a new strategy for design of fine-grained microstructures strengthened via ordered intermetallic phases, exploiting the beneficial effects of discontinuous precipitation, for achieving very high room temperature tensile strengths while maintaining good ductility.

Gwalani, Bharat↗

Local ordering in disordered Nd x Zr 1-x O 2-0.5x pyrochlore as observed using neutron total scattering

Pyrochlore complex oxides (A 2 B 2 O 7 ) are an important class of fluorite-derivative ceramics with exceptional chemical and structural versatility which make them ideal model systems for studying disordering mechanisms over a range of spatial scales. Here, neutron total scattering methods were used to analyze the structural behavior in the non-stoichiometric series Nd x Zr 1-x O 2-0.5x (0.5 ≤ x ≤ 0.23) as a function of Nd content, x. Characterization of the structure functions using Rietveld refinement and the pair distribution functions with small-box refinement reveal complex disordering pathways; the average, long-range phase changes over a very narrow compositional range from pyrochlore ($Fd\bar{3}m$) to defect fluorite ($Fm\bar{3}m$) through full randomization of the cation and anion sublattices at x ~ 0.31, while the local, short-range structure continuously adopts a weberite-type atomic arrangement (C222 1 ). Comparison to a previously studied Ho 2 Ti 2-x Zr x O 7 solid solution series reveals how changes in chemical composition and stoichiometry modify defect formation and determine how disordering progresses across different length scales in pyrochlore oxides.

36 MATERIALS SCIENCE↗

Nanotwin assisted reversible formation of low angle grain boundary upon reciprocating shear load

Severe plastic deformation of metals is known to lead to superior properties that cannot be achieved by any traditional metallurgic process. Origin of the superior properties is perceived to be closely associated with grain refinement, a fundamental process during the severe plastic deformation, which is essentially the formation of new grain boundaries. However, the atomistic mechanism of grain boundary formation remains largely obscure. Here, by using in-situ transmission electron microscopy and molecular dynamic simulation, we reveal, for the first time at atomic level, the shear-induced low-angle grain boundary (LAGB) formation processes in Au nanocrystal. In this work, we discover the LAGB formation is accomplished through inward propagation of nanotwins accompanied by dislocations gliding on the twin boundaries, a nanotwin-mediated dislocation slip mechanism, which shows reversible characteristic under reciprocating shear load and is affected by the nanocrystal microstructure and orientation. Our result unveils unprecedented atomistic insights on shear driven grain refinement towards nanostructure of superior properties.

36 MATERIALS SCIENCE↗

Toward large-scale simulation of residual stress and distortion in wire and arc additive manufacturing

In this study, we aim to advance the structural analysis of wire and arc additive manufacturing (WAAM) by considering the thermomechanical features inherent in direct energy deposition. Simulation approaches including the iterative substructure method (ISM), dynamic mesh refining method (DMRM), and graphics processing unit (GPU) based explicit finite element method (FEM) were developed for accelerating additive manufacturing stress analysis that is very time consuming by conventional numerical methods. ISM and DMRM take advantage of the strong nonlinearity phenomenon near the moving heat source by reducing the global iterations and refining the local mesh, respectively. In addition to the use of GPUs, the explicit FEM is accelerated by a time scaling technique based on the inherent strain concept. The residual stress and distortion of two large builds were analyzed, showing very consistent numerical results and good agreement with experiments. Compared with the commercial software Abaqus, the novel approaches reduced the computational cost substantially without compromising accuracy. The GPU code showed the highest computational efficiency (30~70×), while DMRM and ISM had acceleration factors of 9× and 3×, respectively. Finally, such high-fidelity modeling approaches will be very useful for building up a digital twin of WAAM to reduce development time and cost.

36 MATERIALS SCIENCE↗

An assessment of the utility of multirate time integration for the modeling of laser powder bed fusion

Finite element simulation of the laser powder bed fusion process is made challenging by the inherently multiscale nature of the process. When using the typical global time stepping techniques, slowly-evolving regions of the domain receive the same numerical treatment as the regions with the highest temperature rates. The current work details the implementation and evaluation of an implicit multirate method which is able to advance different regions of the domain with distinct time steps, depending on their current solution rate. Previous work indicates that this representation of the temporal scales of the problem can lead to significant reductions in wall clock run time, and it is shown herein that multirate time integration, when used with a uniform process-scale mesh, can result in speedups of approximately 19, 42, and 87 times, for domains with edge lengths of approximately 1 mm, 2 mm, and 5 mm, respectively. When used in conjunction with $\ h$-refinement (limited to two levels of refinement), the resulting speedups (taken relative to the uniform mesh) are around 28, 85, and 665 times. The method is demonstrated to converge as indicated by the literature, and its use with an AM-Bench domain is demonstrated.

42 ENGINEERING↗

On the hydrothermal stability of Cu/SSZ-13 SCR catalysts

Cu/SSZ-13 SCR catalysts have been extensively studied in the past decade or so. Hydrothermal stability of these catalysts has been identified as the most important criterion for application. In this perspective, we describe recent atomic-level understanding of their hydrothermal stability. In particular, electron paramagnetic resonance (EPR) is shown to rather accurately quantify isolated Cu(II) ions and CuO clusters in fresh and aged catalysts to demonstrate the remarkable hydrothermal stability for Cu2+ ions located in 6-membered ring windows, and the conversion of [Cu(OH)]+ ions in Chabazite cages to CuO clusters. The hydrothermal stability difference of the two isolated Cu(II) ions is confirmed with DFT simulations and the conversion of [Cu(OH)]+ to CuO is proposed to involve formation, migration and condensation of Cu(OH)2 intermediates. The structural destructive role of CuO clusters is attributed to mesopore formation from their migration, which more severely damages the catalysts than dealumination. Finally, perspectives are given on new strategies for low-temperature NOx removal, rational design and refinement of Cu/SSZ-13, and development of new Cu/zeolite SCR catalysts with even better performance than the state-of-the-art Cu/SSZ-13. The authors gratefully acknowledge the US Department of Energy (DOE), Energy Efficiency and Renewable Energy, Vehicle Technologies Office for the support of this work. The research described in this paper was performed in the Environmental Molecular Sciences Laboratory (EMSL), a national scientific user facility sponsored by the DOE’s Office of Biological and Environmental Research and located at Pacific Northwest National Laboratory (PNNL). PNNL is operated for the US DOE by Battelle.

Chabazite, SSZ-13, hydrothermal aging, selective c↗

Crystal structure of Plasmodium falciparum phosphoglycerate kinase: Evidence for anion binding in the basic patch

3-Phosphoglycerate kinase (EC 2.7.2.3) is a key enzyme in the glycolytic pathway and catalyzes an important phosphorylation step leading to the production of ATP. The crystal structure of Plasmodium falciparum phosphoglycerate kinase (PfPGK) in the open conformation is presented in two different groups, namely I222 and P6{sub 1}22. The structure in I222 space group is solved using MAD and refined at 3 {angstrom} whereas that in P6{sub 1}22A is solved using MR and refined at 2.7 {angstrom}. I222 form has three monomers in asymmetric unit whereas P6{sub 1}22 form has two monomers in the asymmetric unit. In both crystal forms a sulphate ion is located at the active site where ATP binds, but no Mg{sup 2+} ion is observed. For the first time another sulphate ion is found at the basic patch where the 3-phosphate of 1,3-biphosphoglycerate normally binds. This was found in both chains of P6{sub 1}22 form but only in chain A of I222 form.

59 BASIC BIOLOGICAL SCIENCES↗

Crystal structure of Mdm12 and combinatorial reconstitution of Mdm12/Mmm1 ERMES complexes for structural studies

Membrane contact sites between organelles serve as molecular hubs for the exchange of metabolites and signals. In yeast, the Endoplasmic Reticulum – Mitochondrion Encounter Structure (ERMES) tethers these two organelles likely to facilitate the non-vesicular exchange of essential phospholipids. Present in Fungi and Amoebas but not in Metazoans, ERMES is composed of five distinct subunits; among those, Mdm12, Mmm1 and Mdm34 each contain an SMP domain functioning as a lipid transfer module. We previously showed that the SMP domains of Mdm12 and Mmm1 form a hetero-tetramer. Here we describe our strategy to diversify the number of Mdm12/Mmm1 complexes suited for structural studies. We use sequence analysis of orthologues combined to protein engineering of disordered regions to guide the design of protein constructs and expand the repertoire of Mdm12/Mmm1 complexes more likely to crystallize. Using this combinatorial approach we report crystals of Mdm12/Mmm1 ERMES complexes currently diffracting to 4.5 Å resolution and a new structure of Mdm12 solved at 4.1 Å resolution. Our structure reveals a monomeric form of Mdm12 with a conformationally dynamic N-terminal β-strand; it differs from a previously reported homodimeric structure where the N-terminal β strands where swapped to promote dimerization. Based on our electron microscopy data, we propose a refined pseudo-atomic model of the Mdm12/Mmm1 complex that agrees with our crystallographic and small-angle X-ray scattering (SAXS) solution data. - Highlights: • We solved a 4.1 Å resolution crystal structure of Mdm12, the soluble subunit of ERMES. • The two Mdm12 apo monomers differ in the conformation of their N-terminal β-strands. • We reconstituted and crystallized two distinct Mdm12/Mmm1 complexes. • SAXS analysis of the complexes agrees with our previous electron microscopy data. • The structure suggests a head-to-tail association in the Mdm12/Mmm1 complex.

60 APPLIED LIFE SCIENCES↗

Direct measures of mechanical energy for knife mill size reduction

Lengthy straw/stalk of biomass may not be directly fed into grinders such as hammer mills and disc refiners. Hence, biomass needs to be preprocessed using coarse grinders like a knife mill to allow for efficient feeding in refiner mills without bridging and choking. Size reduction mechanical energy was directly measured for switchgrass (Panicum virgatum L.), wheat straw (Triticum aestivum L.), and corn stover (Zea mays L.) in an instrumented knife mill. Direct power inputs were determined for different knife mill screen openings from 12.7 to 50.8 mm, rotor speeds between 250 and 500 rpm, and mass feed rates from 1 to 11 kg/min. Overall accuracy of power measurement was calculated to be 0.003 kW. Total specific energy (kWh/Mg) was defined as size reduction energy to operate mill with biomass. Effective specific energy was defined as the energy that can be assumed to reach the biomass. The difference is parasitic or no-load energy of mill. Total specific energy for switchgrass, wheat straw, and corn stover chopping increased with knife mill speed, whereas, effective specific energy decreased marginally for switchgrass and increased for wheat straw and corn stover. Total and effective specific energy decreased with an increase in screen size for all the crops studied. Total specific energy decreased with increase in mass feed rate, but effective specific energy increased for switchgrass and wheat straw, and decreased for corn stover at increased feed rate. For knife mill screen size of 25.4 mm and optimum speed of 250 rpm, optimum feed rates were 7.6, 5.8, and 4.5 kg/min for switchgrass, wheat straw, and corn stover, respectively, and the corresponding total specific energies were 7.57, 10.53, and 8.87 kWh/Mg and effective specific energies were 1.27, 1.50, and 0.24 kWh/Mg for switchgrass, wheat straw, and corn stover, respectively. Energy utilization ratios were calculated as 16.8%, 14.3%, and 2.8% for switchgrass, wheat straw, and corn stover, respectively. These data will be useful for preparing the feed material for subsequent fine grinding operations and designing new mills.

09 BIOMASS FUELS↗

Coupling LaGrit unstructured mesh generation and model setup with TOUGH2 flow and transport: A case study

Furthermore, there are many applications in science and engineering modeling where an accurate representation of a complex model geometry in the form of a mesh is important. In applications of flow and transport in subsurface porous media, this is manifest in models that must capture complex geologic stratigraphy, structure (faults, folds, erosion, deposition) and infrastructure (tunnels, boreholes, excavations). Model setup, defined as the activities of geometry definition, mesh generation (creation, optimization, modification, refine, de-refine, smooth), assigning material properties, initial conditions and boundary conditions requires specialized software tools to automate and streamline the process. In addition, some model setup tools will provide more utility if they are designed to interface with and meet the needs of a particular flow and transport software suite. A control volume discretization that uses a two point flux approximation is for example most accurate when the underlying control volumes are 2D or 3D Voronoi tessellations. In this paper we will present the coupling of LaGriT, a mesh generation and model setup software suite and TOUGH2 to model subsurface flow problems and we show an example of how LaGriT can be used as a model setup tool for the generation of a Voronoi mesh for the simulation program TOUGH2. To generate the MESH file for TOUGH2 from the LaGriT output a standalone module Lagrit2Tough2 was developed, which is presented here and will be included in a future release of LaGriT. Here in this paper an alternative method to generate a Voronoi mesh for TOUGH2 with LaGriT is presented and thanks to the modular and command based structure of LaGriT this method is well suited to generating a mesh for complex models.

58 GEOSCIENCES↗

An implicit-in-time DPG formulation of the 1D1V Vlasov-Poisson equations

Efficient solution of the Vlasov equation, which can be up to six-dimensional, is key to the simulation of many difficult problems in plasma physics. The discontinuous Petrov-Galerkin (DPG) finite element methodology provides a framework for the development of stable (in the sense of Ladyzhenskaya–Babuška–Brezzi conditions) finite element formulations, with built-in mechanisms for adaptivity. While DPG has been studied extensively in the context of steady-state problems and to a lesser extent with space-time discretizations of transient problems, relatively little attention has been paid to time-marching approaches. In the present work, we study a first application of time-marching DPG to the Vlasov equation, using backward Euler for a Vlasov-Poisson discretization. We demonstrate adaptive mesh refinement for two problems: the two-stream instability problem, and a cold diode problem. Furthermore, we believe the present work is novel both in its application of unstructured adaptive mesh refinement (as opposed to block-structured adaptivity, which has been studied previously) in the context of Vlasov-Poisson, as well as in its application of DPG to the Vlasov-Poisson system. We also discuss extensive additions to the Camellia library in support of both the present formulation as well as extensions to higher dimensions, Maxwell equations, and space-time formulations.

97 MATHEMATICS AND COMPUTING↗

Location and valence state of strontium cations on the framework of a carbon dioxide selective porous silicoaluminophosphate

A Sr{sup 2+}-SAPO-34 material that displays superior CO2 adsorption selectivity and capacity was characterized via XPS and UV-vis spectroscopy to elucidate the valence state of strontium cations and framework silicon environment. Most importantly, the location of the strontium has been estimated from a Rietveld refinement analysis of synchrotron diffraction data. The XPS analysis indicated that the apparent valence state of the strontium is less than 2, an indication of its interaction with the large anionic framework. Furthermore, UV-vis tests pointed to changes in the silicon environment, plausibly related to this valence state or framework faulting. For the refinement, the analysis found that strontium occupied two unique sites: a site Sr1 slightly displaced from six-membered rings and a site Sr2 positioned at the top or bottom of the eight-membered rings. The latter position favors the interaction of the alkaline earth metal with CO{sub 2}, probably resulting in an enhanced electric field-quadrupole moment interaction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Chemical model for cement-based materials: Temperature dependence of thermodynamic functions for nanocrystalline and crystalline C-S-H phases

In the context of waste confinement and, more specifically, waste from the nuclear industry, concrete is used both as a confinement and as a building material. Its exposure to high temperatures makes its geochemical behavior difficult to predict over large periods of time. The present work aims to elucidate the solubility constants, as a function of temperature, for the phases of the system CaO-SiO{sub 2}-H{sub 2}O. For the nanocrystalline phases, the present work investigates the existence of compounds of fixed composition, possibly in a metastable state. The question of whether the nanocrystalline C-S-H phases correspond to a series of phases of discrete composition or a solid solution is discussed and compared to the possible influence of impurities in the solid phases. For the crystalline phases, having established that the currently available values of thermodynamic properties were not consistent, we show that their refinement leads to a better agreement with the literature data. From the refined thermodynamic properties of crystalline C-S-H, a polyhedral decomposition model is developed. It enables to estimate the enthalpy of formation and the heat capacity of nanocrystalline C-S-H phases. Finally, verification shows that such phases remain unstable compared to the crystalline phases, at room or higher temperatures. A comparison, based on reaction enthalpies derived from experimental data indicates that predicted values for nanocrystalline C-S-H are in close agreement with experimental data. By estimating the properties of okenite and truscottite with the model developed in this study, we have been able to complete the CaO-SiO{sub 2}-H{sub 2}O phase diagram with a reasonable agreement with the literature. The case of jaffeite remains open to discussion. Finally, for the hydrate C2SH,alpha, the model predicts a transition with hillebrandite at 159 deg. C, in contradiction with the hypothesis of C2SH,alpha metastability.

36 MATERIALS SCIENCE↗

Full quantitative phase analysis of hydrated lime using the Rietveld method

Full quantitative phase analysis (FQPA) using X-ray powder diffraction and Rietveld refinements is a well-established method for the characterization of various hydraulic binders such as Portland cement and hydraulic limes. In this paper, the Rietveld method is applied to hydrated lime, a non-hydraulic traditional binder. The potential presence of an amorphous phase in this material is generally ignored. Both synchrotron radiation and a conventional X-ray source were used for data collection. The applicability of the developed control file for the Rietveld refinements was investigated using samples spiked with glass. The results were cross-checked by other independent methods such as thermal and chemical analyses. The sample microstructure was observed by transmission electron microscopy. It was found that the consistency between the different methods was satisfactory, supporting the validity of FQPA for this material. For the samples studied in this work, the amount of amorphous material was in the range 2-15 wt.%.

36 MATERIALS SCIENCE↗

Experimental and computational study of thaumasite structure

The structure of thaumasite has been studied experimentally by means of a single crystal X-ray diffraction and FTIR methods, and theoretically using density functional theory (DFT) method. Very good agreement was achieved between calculated and experimental structural parameters. In addition, calculations offered the refinement of the positions of the hydrogen atoms. The detailed analysis of the hydrogen bonds existing in the thaumasite structure has been performed. Several types of hydrogen bonds have been classified. The water molecules coordinating Ca{sup 2+} cation act as proton donors in moderate O-H···O hydrogen bonds formed with CO₃⁻²and SO₄⁻² anions. The multiple O-H···O hydrogen bonds exist among water molecules themselves. Finally, relatively weak hydrogen bonds form water molecules with the OH groups from the coordination sphere of the Si(OH)₆⁻² anion. Further, calculated vibrational spectrum allowed complete assignment of all vibrational modes which are not available from the experimental spectrum that has a complex structure with overlapped bands, especially below 1500 cm⁻¹. Highlights: • The thaumasite structure was studied experimentally and using DFT method. • We used DFT method for the refinement of the positions of hydrogen atoms. • A detailed analysis of the hydrogen bonds was done. • A complete assignment of all bands to particular types of vibrations was done.

36 MATERIALS SCIENCE↗

Microstructural and strength improvements through the use of Na{sub 2}CO{sub 3} in a cementless Ca(OH){sub 2}-activated Class F fly ash system

This study explores the beneficial effects of Na{sub 2}CO{sub 3} as an additive for microstructural and strength improvements in a Ca(OH){sub 2}-activated fly ash system. NaOH-activated fly ash samples were also tested to compare the effect of Na{sub 2}CO{sub 3}. Compressive strength testing, XRD, SEM/BSE/EDS, {sup 29}Si/{sup 27}Al MAS-NMR, MIP and TGA were performed. The testing results indicate that the use of Na{sub 2}CO{sub 3} for Ca(OH){sub 2}-activation led to a noticeable improvement in strength and microstructure, primarily due to (1) more dissolution of raw fly ash at an early age, (2) more formation of C–S–H [or C–S–H(I)], (3) porosity reduction, and (4) pore-size refinement. We also found that (1) an early high alkalinity from the NaOH formation was not a major cause of strength, (2) geopolymer was not formed despite the early NaOH formation, and (3) no visible pore-filling action of CaCO{sub 3} was observed. However, Na{sub 2}CO{sub 3} did not produce any improvement in strength for NaOH-activated fly ash. -- Highlights: •The use of Na{sub 2}CO{sub 3} significantly improved strength and microstructure. •The use of Na{sub 2}CO{sub 3} induced more dissolution of raw fly ash at early ages. •The use of Na{sub 2}CO{sub 3} promoted more C–S–H [or C–S–H(I)] formation. •The use of Na{sub 2}CO{sub 3} reduced total porosity and refined pore-size distribution. •The use of Na{sub 2}CO{sub 3} produced neither geopolymer formations nor pore-filling actions from CaCO{sub 3}.

36 MATERIALS SCIENCE↗

Application of micro X-ray diffraction to investigate the reaction products formed by the alkali–silica reaction in concrete structures

Alkali–silica reaction (ASR) is one of the most important deterioration mechanisms in concrete leading to substantial damages of structures worldwide. Synchrotron-based micro-X-ray diffraction (micro-XRD) was employed to characterize the mineral phases formed in micro-cracks of concrete aggregates as a consequence of ASR. This high spatial resolution technique enables to directly gain structural information on ASR products formed in a 40-year old motorway bridge damaged due to ASR. Micro-X-ray-fluorescence was applied on thin sections to locate the reaction products formed in veins within concrete aggregates. Micro-XRD pattern were collected at selected points of interest along a vein by rotating the sample. Rietveld refinement determined the structure of the ASR product consisting of a new layered framework similar to mountainite and rhodesite. It is conceivable that understanding the structure of the ASR product may help developing new technical treatments inhibiting ASR.

36 MATERIALS SCIENCE↗