Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “profiling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,621 records · Page 90
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Electron density profile and associated fluctuation measurements using a microwave reflectometry diagnostic on Helically Symmetric eXperiment (HSX)

Abstract A dual-band frequency-modulated reflectometry is employed on the Helically Symmetric eXperiment (HSX) stellarator. This system equips a fast PIN switch to alternate the frequency source between two voltage-controlled oscillators, providing an operational frequency range from 14.5 GHz to 25.5 GHz. A monostatic antenna geometry and an ellipsoidal mirror are implemented in the vessel of HSX, where the polarization of the transmitted microwave can be switched between O- and X-mode to accommodate the magnetic field and plasma density. Although the original system was designed for density fluctuation measurement, significant efforts have been undertaken to improve the system performance and to realize the density profile inversion. Recent improvements of the system reported here include calibration of the dispersion in the transmission line, optimization of the waveform, and implementation of the Choi-Williams time–frequency distribution for spectral analysis. In this paper, we present the optimization of the reflectometry system along with first experimental measurements of the density profile and observations of fluctuations during gas puffing experiments.

Han, X. (ORCID:0000000184986433)↗
DOE OSTI2014

Identifying the most crucial parameters of the initial curvature profile for primordial black hole formation

Primordial black holes (PBHs) are an important tool in cosmology to probe the primordial spectrum of small-scale curvature perturbations that reenter the cosmological horizon during radiation domination epoch. We numerically solve the evolution of spherically symmetric highly perturbed configurations to clarify the criteria of PBHs formation using an extremely wide class of curvature profiles characterized by five parameters, (in contrast to only two parameters used in all previous papers) which specify the curvature profiles not only at the central region but also at the outer boundary of configurations. It is shown that formation or non-formation of PBHs is determined essentialy by only two master parameters one of which can be presented as an integral of curvature over initial configurations and the other is presented in terms of the position of the boundary and the edge of the core.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2014

Derivation of the anisotropy profile, constraints on the local velocity dispersion, and implications for direct detection

We study the implications of a pseudo-phase-space density power-law for the anisotropy profile of a Milky Way-like dark matter halo. Requiring that the anisotropy parameter does not take non-physical values within the virial radius places a maximum value on the local radial velocity dispersion. For a plausible range of halo parameters, it is possible to take a local total velocity dispersion of up to about 300 km/s. Making this choice uniquely specifies the anisotropy and dispersion profiles. We introduce a way to model the local velocity distribution that incorporates this anisotropy and study the impact on direct detection.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

Signatures of self-interacting dark matter on cluster density profile and subhalo distributions

Non-gravitational interactions between dark matter particles with strong scattering, but relatively small annihilation and dissipation, has been proposed to match various observables on cluster and group scales. In this paper, we present the results from large cosmological simulations which include the effects of different self-interaction scenarios. In particular we explore a model with the differential cross section that can depend on both the relative velocity of the interacting particles and the angle of scattering. We focus on how quantities, such as the stacked density profiles, subhalo counts and the splashback radius change as a function of different forms of self-interaction. We find that self-interactions not only affect the central region of the cluster, the effect well known from previous studies, but also significantly alter the distribution of subhalos and the density of particles out to the splashback radius. Therefore, our results suggest that current weak lensing data can already put constraints on the self-interaction cross-section that are only slightly weaker than the Bullet Cluster constraints (σ/m ≲ 2 cm 2 /g), and future lensing surveys should be able to tighten them even further making halo profiles on cluster scales a competitive probe for DM physics.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

Did we hear the sound of the Universe boiling? Analysis using the full fluid velocity profiles and NANOGrav 15-year data

Abstract In this paper, we analyse sound waves arising from a cosmic phase transition where the full velocity profile is taken into account as an explanation for the gravitational wave spectrum observed by multiple pulsar timing array groups. Unlike the broken power law used in the literature, in this scenario the power law after the peak depends on the macroscopic properties of the phase transition, allowing for a better fit with pulsar timing array (PTA) data. We compare the best fit with that obtained using the usual broken power law and, unsurprisingly, find a better fit with the gravitational wave (GW) spectrum that utilizes the full velocity profile. Even more importantly, the thermal parameters that produce the best fit are quite different. We then discuss models that can produce the best-fit point and complementary probes using CMB experiments and searches for light particles in DUNE, IceCUBE-Gen2, neutrinoless doubleβ-decay, and forward physics facilities (FPF) at the LHC like FASERν, etc.

Astronomy & Astrophysics↗
DOE OSTI2021

Current profile and normalized beta control via feedback linearization and Lyapunov techniques

Abstract Simultaneous control of the current profile and normalized plasma beta is an essential control problem in the development of advanced tokamak scenarios. However, this control problem is especially challenging due to the nonlinear nature of the current, heat, and particle transport dynamics, as well as the difficulty to understand and accurately model such processes. In this work, a nonlinear, robust, model-based controller for the simultaneous regulation of the current profile and normalized beta has been designed using feedback linearization and Lyapunov redesign techniques. Feedback linearization avoids approximate linearization of the plasma dynamics, retaining the original physics content of the model. Moreover, the use of Lyapunov redesign techniques makes the controller robust against the uncertainties arising during the modeling process. The controller’s performance in the presence of unknown dynamics is tested in nonlinear, one-dimensional simulations using the Control Oriented Transport SIMulator (COTSIM) code, which employs plasma models that are significantly more complex than those employed for control synthesis.

Physics↗
DOE OSTI2021

Evolution of ELMs, pedestal profiles and fluctuations in the inter-ELM period in NBI and ECH dominated discharges in DIII-D

In DIII-D, it has been observed that ELM frequency decreases by 40% and ELM spacing becomes more regular in time when heating is changed from pure neutral beam injection (NBI) to predominantly electron cyclotron heating (ECH) in ITER Similar Shape plasmas. In comparison with pure the NBI discharges, pedestal fluctuations in magnetics and density increase in the ECH dominated discharges. Recovery of the pedestal profiles like electron density (ne), temperature (Te) and pressure (pe) shows marked differences for these two heating schemes. Average profiles in the last 30% of the ELM cycle shows higher Te, lower ne, and similar pe at the pedestal top for the ECH discharge when compared to the NBI discharge. Here, the gradient of Te (∇Te) is also steeper at the pedestal in the ECH discharge. Magnetic fluctuations show 3 distinct modes in 13~116 kHz in the ECH discharges only. ne fluctuations show two modes evolving in the inter-ELM period of the ECH discharge, a low frequency (400 kHz) quasi-coherent mode (LFQC) and high frequency (~2 MHz) broadband (HFB) fluctuations. Evolution of these modes has marked correspondence with the inter-ELM ∇Te recovery. A sharp decrease in the Dα baseline is observed whenever the LFQC weakens and the HFB grows, prior to each large ELM. Transport coefficients obtained from TRANSP shows that MTM and/or TEM are plausible candidates for the observed fluctuations. Linear gyrofluid simulation (TGLF) corroborates this characterization. TGLF shows that the linear growth rate of the most dominant mode peaks at ion-scale (kθρs ~ 0.4) at the pedestal steep gradient and the frequency is in the electron diamagnetic direction. It is proposed that increased fluctuations in the ECH dominated case, due to increased ∇Te, caused an increase in fluctuation-driven transport in the pedestal and slowed the pedestal recovery between ELMs, leading to a reduction in the ELM frequency.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Dependence of the boundary heat flux width on core and edge profiles in Alcator C-Mod

This work presents new evidence that the heat flux width, λ q , in the Alcator C-Mod tokamak scales with the edge electron pressure, as observed in the ASDEX Upgrade (AUG) tokamak, but the scaling with volume-averaged pressure, $\bar{p}$, from the plasma stored energy, is a better predictor of λ q in Alcator C-Mod than the edge electron pressure. These previous studies, which find that λ q decreases with increasing plasma pressure, imply that a high performance core at high pressure will lead to challenging heat and particle exhaust due to very small λ q . This concern has led to our significant enlargement of the C-Mod database with the electron density, temperature, and pressure profile data from the Thomson scattering and electron cyclotron emission diagnostics. Using the C-Mod database augmented with new profile data, we find that λ q decreases with increasing edge electron pressure as ${\lambda }_{q}\propto {p}_{\mathrm{e},95}^{-0.26}$, similar to results from AUG, and showing the strength of cross-machine comparisons. We also find that ${\lambda }_{q}\propto {p}_{\mathrm{e},\mathrm{c}\mathrm{o}\mathrm{r}\mathrm{e}}^{-0.56}$, consistent with the original finding from C-Mod that the heat flux width scales as ${\bar{p}}^{-0.48}$. The scalings of λ q with separatrix pressure and gradient scale length are found to match the AUG results qualitatively. The C-Mod scalings with edge plasma quantities have more scatter than the $\bar{p}$ scaling, and, importantly, show different trends for H-modes relative to L- and I-mode. Furthermore, investigating the source of this discrepancy presents an opportunity for further study that may improve our ability to predict the heat flux width in different confinement scenarios in the pursuit of optimizing core-edge performance in future reactors.

Alcator C-Mod↗
DOE OSTI2018

Comparison of profile measurements and TRANSPORT beam envelope predictions along the 80-m LANSCE pRad beamline

Here in this paper we report a comparison between the simulation of beam phase-space and profile distributions with diagnostic measurements. TRANSPORT, a particle transport code, was used for the prediction of a 800MeV proton beam envelope from the end of the linac to the proton radiography (pRad) facility (a total length of 80 meters). The beam profile was measured at key positions along the beamline using wire scanners and gated CCD camera systems. These measurements were compared to their respective points along the simulated beamline. The predicted beam envelope and measured data correspond within expected errors.

47 OTHER INSTRUMENTATION↗
DOE OSTI2020

The boundary density profile of a Coulomb droplet. Freezing at the edge

In this paper, we revisit the problem of computing the boundary density profile of a droplet of two-dimensional one-component plasma (2D OCP) with logarithmic inter- action between particles in a confining harmonic potential. At a sufficiently low temperature, but still in the liquid phase, the density exhibits oscillations as a function of the distance to the boundary of the droplet. We obtain the density profile numerically using Monte-Carlo simulations of the 2D OCP. We argue that the decay and period of those oscillations can be explained within a picture of the Wigner crystallization near the boundary, where the crystal is gradually melted with the increasing distance to the boundary.

2D OCP↗
DOE OSTI2015

EFFECTS OF NITROGEN PHOTOABSORPTION CROSS SECTION RESOLUTION ON MINOR SPECIES VERTICAL PROFILES IN TITAN’S UPPER ATMOSPHERE

The significant variations in both measured and modeled densities of minor species in Titan’s atmosphere call for the evaluation of possible influencing factors in photochemical modeling. The effect of nitrogen photoabsorption cross section selection on the modeled vertical profiles of minor species is analyzed here, with particular focus on C{sub 2}H{sub 6} and HCN. Our results show a clear impact of cross sections used on all neutral and ion species studied. Affected species include neutrals and ions that are not primary photochemical products, including species that do not even contain nitrogen. The results indicate that photochemical models that employ low-resolution cross sections may significantly miscalculate the vertical profiles of minor species. Such differences are expected to have important implications for Titan’s overall atmospheric structure and chemistry.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2015

MATCHING THE DARK MATTER PROFILES OF dSph GALAXIES WITH THOSE OF SIMULATED SATELLITES: A TWO-PARAMETER COMPARISON

We compare the dark matter halos’ structural parameters derived for four Milky Way dwarf spheroidal galaxies to those of subhalos found in cosmological N-body simulations. We confirm that estimates of the mass at a single fixed radius are fully consistent with the observations. However, when a second structural parameter such as the logarithmic slope of the dark halo density profile measured close to the half-light radius is included in the comparison, we find little to no overlap between the satellites and the subhalos. Typically the right mass subhalos have steeper profiles at these radii than measurements of the dSph suggest. Using energy arguments we explore if it is possible to solve this discrepancy by invoking baryonic effects. Assuming that feedback from supernovae (SNe) can lead to a reshaping of the halos, we compute the required efficiency and find entirely plausible values for a significant fraction of the subhalos and even as low as 0.1%. This implies that care must be taken not to exaggerate the effect of SNe feedback as this could make the halos too shallow. These results could be used to calibrate and possibly constrain feedback recipes in hydrodynamical simulations.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

Learning continuous scattering length density profiles from neutron reflectivities using convolutional neural networks

Interpreting neutron reflectivity (NR) data using ad hoc multi-layer models and physics-based models provides information about spatially resolved neutron scattering length density (NSLD) profiles. Recent improvements in data acquisition systems have allowed acquiring thousands of NR curves in a couple of hours, which has led to a need for automated data analysis tools to interpret NR measurements in real-time. Here, we present a machine learning analysis workflow that uses a series of models, based on a convolutional neural network (CNN), to learn the relation between the NSLDs and the NRs, and subsequently produce continuous NSLD profiles directly from NRs. The usefulness of our CNN-based models is demonstrated by constructing NSLDs from NRs of several films containing homopolymer polyzwitterions and diblock copolymers mixed with different types of salts. Comparisons of the NSLDs with those constructed using ad hoc multi-layer models reveal a very good agreement, suggesting the potential of CNN-based models for real-time automated data analysis of NRs.

36 MATERIALS SCIENCE↗
DOE OSTI2013

Integrated profiling of three dimensional cell culture models and 3D microscopy

Motivation: Our goal is to develop a screening platform for quantitative profiling of colony organizations in 3D cell culture models. The 3D cell culture models, which are also imaged in 3D, are functional assays that mimic the in vivo characteristics of the tissue architecture more faithfully than the 2D cultures. However, they also introduce significant computational challenges, with the main barriers being the effects of growth conditions, fixations and inherent complexities in segmentation that need to be resolved in the 3D volume. Results: A segmentation strategy has been developed to delineate each nucleus in a colony that overcomes (i) the effects of growth conditions, (ii) variations in chromatin distribution and (iii) ambiguities formed by perceptual boundaries from adjacent nuclei. The strategy uses a cascade of geometric filters that are insensitive to spatial nonuniformity and partitions a clump of nuclei based on the grouping of points of maximum curvature at the interface of two neighboring nuclei. These points of maximum curvature are clustered together based on their coplanarity and proximity to define dissecting planes that separate the touching nuclei. The proposed curvature-based partitioning method is validated with both synthetic and real data, and is shown to have a superior performance against previous techniques. Validation and sensitivity analysis are coupled with the experimental design that includes a non-transformed cell line and three tumorigenic cell lines, which covers a wide range of phenotypic diversity in breast cancer. Colony profiling, derived from nuclear segmentation, reveals distinct indices for the morphogenesis of each cell line.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

Biostimulation of Salicornia europaea L. crops with plant growth-promoting bacteria in laboratory and field conditions: effects on growth and metabolite profile

Abstract Aim The objective of the work was to assess the effect of biostimulation with selected plant growth-promoting bacteria on growth and metabolite profile of Salicornia europaea. Methods and results Salicornia europaea seeds were inoculated with different combinations of plant growth-promoting bacteria Brevibacterium casei EB3, Pseudomonas oryzihabitans RL18, and Bacillus aryabhattai SP20. Plants germinated from inoculated seeds were grown either in laboratory conditions or in a saline crop field. Fresh and dry weight were determined at the end of the experiment, for biomass quantification. The microbiological quality of fresh shoots for human consumption as salad greens was assessed, and the persistence of the inoculated strains in the plant rhizosphere was confirmed by next-generation sequencing (Illumina) of the 16S rDNA gene. The primary metabolite profile of biostimulated plants was characterized by GC–TOF-MS. In laboratory conditions, inoculation with the two strains Br. casei EB3 and Ps. oryzihabitans RL18 caused the most significant increase in biomass production (fresh and dry weight), and caused a shift in the central metabolic pathways of inoculated plants toward amino acid biosynthesis. In the field experiment, no significant biostimulation effect was detected with any of the tested inoculants. Seed inoculation had no significant effect on the microbiological quality of the edible parts. The persistence of inoculants was confirmed in both experiments. Conclusions Manipulation of the plant microbiome can trigger primary metabolic reconfiguration and modulate the plant metabolism while promoting plant growth.

Ferreira, Maria J.↗
DOE OSTI2022

Investigating the origin of observed central dips in radial metallicity profiles

ABSTRACT Radial metallicity trends provide a key indicator of physical processes such as star formation and radial gas migration within a galaxy. Large integral field unit surveys allow for detailed studies of these radial variations, with recent observations detecting central dips in the metallicity, which may trace the impact of various evolutionary processes. However, the origin of these dips has not been conclusively determined, with suggestions that they may be diagnostic dependent. In this paper, we use the Sloan Digital Sky Survey IV Mapping Nearby Galaxies at Apache Point Observatory survey to investigate whether the observed dips represent genuine decreases in the central metallicity, or whether they could be an artefact of the diagnostic used. Using a sub-sample of 758 local star-forming galaxies at low inclinations, we investigate in detail the impact of using different strong line diagnostics on the shapes of the returned profiles, and the prevalence of dips. We find no clear evidence of the dips being caused by changing values of the ionization parameter within galaxies. To investigate physical causes, we explore both global and spatially resolved parameters, finding that galaxies exhibiting central dips in the O3N2 metallicity profile have on average lower H α equivalent width values out to $R/R_{\rm {e}} \sim 1.5$, and higher values of DN(4000) in the central regions. We additionally find a higher prevalence of dips in galaxies with high stellar mass, and lower values of global specific star formation rate, suggesting a possible link to central quenching. Nevertheless, these results are dependent on the diagnostic used, suggesting caution should be taken when interpreting observed features in galaxy metallicity gradients.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

Shocks in the stacked Sunyaev-Zel’dovich profiles of clusters II: Measurements from SPT-SZ + Planck Compton- y map

ABSTRACT We search for the signature of cosmological shocks in stacked gas pressure profiles of galaxy clusters using data from the South Pole Telescope (SPT). Specifically, we stack the latest Compton-y maps from the 2500 deg2 SPT-SZ survey on the locations of clusters identified in that same data set. The sample contains 516 clusters with mean mass $\langle M_{\rm 200m}\rangle = 10^{14.9} \, {\rm M}_\odot$ and redshift 〈z〉 = 0.55. We analyse in parallel a set of zoom-in hydrodynamical simulations from the three hundred project. The SPT-SZ data show two features: (i) a pressure deficit at R/R200m = 1.08 ± 0.09, measured at 3.1σ significance and not observed in the simulations, and; (ii) a sharp decrease in pressure at R/R200m = 4.58 ± 1.24 at 2.0σ significance. The pressure deficit is qualitatively consistent with a shock-induced thermal non-equilibrium between electrons and ions, and the second feature is consistent with accretion shocks seen in previous studies. We split the cluster sample by redshift and mass, and find both features exist in all cases. There are also no significant differences in features along and across the cluster major axis, whose orientation roughly points towards filamentary structure. As a consistency test, we also analyse clusters from the Planck and Atacama Cosmology Telescope Polarimeter surveys and find quantitatively similar features in the pressure profiles. Finally, we compare the accretion shock radius ($R_{\rm sh,\, acc}$) with existing measurements of the splashback radius (Rsp) for SPT-SZ and constrain the lower limit of the ratio, $R_{\rm sh,\, acc}/R_{\rm sp}\gt 2.16 \pm 0.59$.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2023

Reconstructing large-scale temperature profiles around z ∼ 6 quasars

ABSTRACT High-redshift quasars ionize He ii into He iii around them, heating the intergalactic medium in the process and creating large regions with elevated temperature. In this work, we demonstrate a method based on a convolutional neural network (CNN) to recover the spatial profile for T0, the temperature at the mean cosmic density, in quasar proximity zones. We train the neural network with synthetic spectra drawn from a Cosmic Reionization on Computers simulation. We discover that the simple CNN is able to recover the temperature profile with an accuracy of ≈1400 K in an idealized case of negligible observational uncertainties. We test the robustness of the CNN and discover that it is robust against the uncertainties in quasar host halo mass, quasar continuum, and ionizing flux. We also find that the CNN has good generality with regard to the hardness of quasar spectra. This shows that with noiseless spectra, one could use a simple CNN to distinguish gas inside or outside the He iii region created by the quasar. Because the size of the He iii region is closely related to the total quasar lifetime, this method has great potential in constraining the quasar lifetime on ∼Myr time-scales. However, noise poses a big problem for accuracy and could downgrade the accuracy to ≈2340 K even for very high signal-to-noise (≳50) spectra. Future studies are needed to reduce the error associated with noise to constrain the lifetimes of reionization epoch quasars with currently available data.

79 ASTRONOMY AND ASTROPHYSICS↗