Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “predictive simulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,621 records · Page 90

High-Resolution Comonomer Sequencing of Blocky Brominated Syndiotactic Polystyrene Copolymers Using 13C NMR Spectroscopy and Computer Simulations

This work demonstrates the first high-resolution comonomer sequencing of Blocky brominated syndiotactic polystyrene (sPS-co-sPS-Br) copolymers based on pentad assign- ments of the quaternary carbon region of the nuclear magnetic resonance spectrum. Copolymers containing p-bromostyrene (Br-Sty) units were prepared in matched sets using postpolymerization bromination methods carried out in the heterogeneous gel state (Blocky) and homogeneous solution state (Random). Quantitative information from the quaternary carbon spectra, heteronuclear multiple bond correlation spectroscopy, electronic structure calculations, and simulated statistically random copolymers was correlated to confirm the carbon resonance assignments for all 20 possible pentad comonomer sequences. Using the experimental pentad sequence prevalences, a computer code was developed to simulate chains with microstructures typical of each sample as a means to visually represent the copolymer blockiness with quantitative precision. Based on the microstructure and distribution of run lengths in these chains, the simulations revealed that the Blocky copolymers contain a high degree of blockiness. By comparing the run lengths in the simulated chains to the average number of styrene units in a crystalline segment of sPS (found by small-angle X-ray scattering), copolymer crystallizability was predicted. For the simulated Blocky B-21% (21 mol % Br-Sty) chain, the probability of randomly selecting a styrene unit in a crystallizable block was 25.8%, while that in the simulated Random R-18% was zero, in excellent agreement with the experimental crystallization behavior measured by differential scanning calorimetry. Additionally, these predictions confirmed that the simulated chains accurately represent the ensemble of chains in their respective copolymer samples. Furthermore, each simulated Blocky chain contained one or more long sPS blocks that paralleled the measured 38-40 styrene units spanning a crystalline segment within the sPS/CCl4 gel. This finding affirmed that the long sPS segments originated from the precise lamellar structure within the heterogeneous gel morphology (i.e., block length is correlated with lamellar thickness). Overall, the ability to tailor the copolymer microstructure through control of the semicrystalline gel morphology opens the door to synthesizing ordered copolymers by postpolymerization functionalization processes with unprecedented levels of compositional control.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

System dynamic simulation: A new method in social impact assessment (SIA)

Many complex social questions are difficult to address adequately with conventional methods and techniques, due to the complicated dynamics, and hard to quantify social processes. Despite these difficulties researchers and practitioners have attempted to use conventional methods not only in evaluative modes but also in predictive modes to inform decision making. The effectiveness of SIAs would be increased if they were used to support the project design processes. This requires deliberate use of lessons from retrospective assessments to inform predictive assessments. Social simulations may be a useful tool for developing a predictive SIA method. There have been limited attempts to develop computer simulations that allow social impacts to be explored and understood before implementing development projects. In light of this argument, this paper aims to introduce system dynamic (SD) simulation as a new predictive SIA method in large development projects. We propose the potential value of the SD approach to simulate social impacts of development projects. We use data from the SIA of Gareh-Bygone floodwater spreading project to illustrate the potential of SD simulation in SIA. It was concluded that in comparison to traditional SIA methods SD simulation can integrate quantitative and qualitative inputs from different sources and methods and provides a more effective and dynamic assessment of social impacts for development projects. We recommend future research to investigate the full potential of SD in SIA in comparing different situations and scenarios.

54 ENVIRONMENTAL SCIENCES↗

In silico simulations of tunneling barrier measurements for molecular orbital-mediated junctions: A molecular orbital theory approach to scanning tunneling microscopy

A new simulator for scanning tunneling microscopy (STM) is presented based on the linear combination of atomic orbitals molecular orbital (LCAO-MO) approximation for the effective tunneling Hamiltonian, which leads to the convolution integral when applied to the tip interaction with the sample. This approach intrinsically includes the structure of the STM tip. Through this mechanical emulation and the tip-inclusive convolution model, dI/dz images for molecular orbitals (which are closely associated with apparent barrier height, ϕ{sub ap}) are reported for the first time. For molecular adsorbates whose experimental topographic images correspond well to isolated-molecule quantum chemistry calculations, the simulator makes accurate predictions, as illustrated by various cases. Distortions in these images due to the tip are shown to be in accord with those observed experimentally and predicted by other ab initio considerations of tip structure. Simulations of the tunneling current dI/dz images are in strong agreement with experiment. The theoretical framework provides a solid foundation which may be applied to LCAO cluster models of adsorbate–substrate systems, and is extendable to emulate several aspects of functional STM operation.

42 ENGINEERING↗

Broadband Characterization and Circuit Model Development of Transmission-Scale Transformers

This report describes broadband measurements of transmission-scale transformers typical in the electric power grid. This work was performed as part of the EMP Resilient Grid LDRD project at Sandia National Laboratories to generate circuit models that can be used for high-altitude electromagnetic pulse (HEMP) coupling simulations and response predictions. The objective of the work was to obtain characterization data of substation yard equipment across a frequency range relevant to HEMP. Vector network analyzer measurements up to 100 MHz were performed on two power transformers at ABB-Hitachi and a single ITEC potential transformer. Custom cable breakouts were designed to interface with the transformer terminals and provide ground connections to the chassis at the base of the transformer bushings. The three-phase terminals of the power transformers were measured as a common mode impedance using a parallel resistive splitter, and the single-phase terminals of the potential transformer were measured directly. A vector fitting algorithm was used to empirically fit circuit models to the resulting two-port networks and input impedances of the measured objects. Simplified circuit representations of the input impedances were also generated to assess the degree of precision needed for high-altitude electromagnetic pulse response predictions, which were performed in Sandia's XYCE circuit simulator platform. HEMP coupling simulations using the transformer models showed significant reduction in the voltage peak and broadening in the pulse width seen at the power transformer compared to the traveling wave voltage. This indicated the importance of the load condition when defining the coupled insult in an electric power substation. Simplified circuit models showed a similar voltage at the transformer with a smoothed waveform. The presence of potential transformers in the simulation did not significantly change the simulated voltage at the power transformer. Single-port input impedance models were also developed to define load conditions when transfer characteristics were not necessary.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Collaborative: in situ visual analytics technologies for extreme scale combustion simulations

This project aims to drastically enhance the usability of in situ analysis and visualization for extreme-scale scientific simulations. Current exascale computing capabilities promise to offer greater predictive ability of simulations and to further push the frontiers of science and technology. However, to validate the simulation output at extreme scale, examine the modeled phenomena, and discover previously unknowns from the output data, the output must be reduced or transformed in situ as it is being generated during the simulation such that the amount of data to examine and store is kept to a minimum. Such in situ approaches allow us to process and analyze the data and any embedded geometry to an extent that would be prohibitively expensive, if not impossible, to perform as a post hoc task. While in situ processing has been demonstrated to be a feasible and promising approach, its full potential has not yet been leveraged. In this project, we have developed comprehensive enhancements to in situ technology based on probability distributions in data. Our research focuses on jointly developing new ways of interacting with massive statistical samples while creatively utilizing new state-of-the-art computational resources to push the boundaries of in situ exploration. Moreover, we have developed new time-dependent techniques to enable previously unattainable capabilities in areas such as intelligent simulation steering and precise feature identification. We have experimentally studied our design and implementation at NERSC and OLCF, and are able to leverage existing in situ infrastructures whenever possible. While the exemplar in this project is combustion, many other fields for which turbulent transport is important, e.g., fusion, climate, astrophysics among others, encounter similar issues as simulations scale up to the exascale. This project shows its potential to generate high impact on DOE missions since the resulting technology promises to improve scientists’ ability to rapidly and correctly interpret and tune extreme-scale simulations, leading to new scientific understanding and advancements.

97 MATHEMATICS AND COMPUTING↗

New Constraints on the Dark Matter Density Profiles of Dwarf Galaxies from Proper Motions of Globular Cluster Streams

The central density profiles in dwarf galaxy halos depend strongly on the nature of dark matter (DM). Recently, in Malhan et al. we employed N-body simulations to show that the cuspy cold DM subhalos predicted by cosmological simulations can be differentiated from cored subhalos using the properties of accreted globular cluster (GC) streams since these GCs experience tidal stripping within their parent halos prior to accretion onto the Milky Way. We previously found that clusters that are accreted within cuspy subhalos produce streams with larger physical widths and higher dispersions in line-of-sight velocity and angular momentum than streams that are accreted within cored subhalos. Here, we use the same suite of simulations to demonstrate that the dispersion in the tangential velocities of streams (${\sigma }_{{v}_{\mathrm{Tan}}}$) is also sensitive to the central DM density profiles of their parent dwarfs and GCs that they were accreted from; cuspy subhalos produce streams with larger ${\sigma }_{{v}_{\mathrm{Tan}}}$ than those accreted inside cored subhalos. Using Gaia EDR3 observations of multiple GC streams we compare their ${\sigma }_{{v}_{\mathrm{Tan}}}$ values with simulations. The measured ${\sigma }_{{v}_{\mathrm{Tan}}}$ values are consistent with both an “in situ” origin and with accretion inside cored subhalos of M ~ 10 8–9 M ⊙ (or very low-mass cuspy subhalos of mass ~10 8 M ⊙ ). Despite the large current uncertainties in ${\sigma }_{{v}_{\mathrm{Tan}}}$, we find a low probability that any of the progenitor GCs were accreted from cuspy subhalos of M ≳ 10 9 M ⊙ . The uncertainties on Gaia tangential velocity measurements are expected to decrease in future and will allow for stronger constraints on subhalo DM density profiles.

79 ASTRONOMY AND ASTROPHYSICS↗

Weak lensing combined with the kinetic Sunyaev–Zel’dovich effect: a study of baryonic feedback

ABSTRACT Extracting precise cosmology from weak lensing surveys requires modelling the non-linear matter power spectrum, which is suppressed at small scales due to baryonic feedback processes. However, hydrodynamical galaxy formation simulations make widely varying predictions for the amplitude and extent of this effect. We use measurements of Dark Energy Survey Year 3 weak lensing (WL) and Atacama Cosmology Telescope DR5 kinematic Sunyaev–Zel’dovich (kSZ) to jointly constrain cosmological and astrophysical baryonic feedback parameters using a flexible analytical model, ‘baryonification’. First, using WL only, we compare the $S_8$ constraints using baryonification to a simulation-calibrated halo model, a simulation-based emulator model, and the approach of discarding WL measurements on small angular scales. We find that model flexibility can shift the value of $S_8$ and degrade the uncertainty. The kSZ provides additional constraints on the astrophysical parameters, with the joint WL + kSZ analysis constraining $S_8=0.823^{+0.019}_{-0.020}$. We measure the suppression of the non-linear matter power spectrum using WL + kSZ and constrain a mean feedback scenario that is more extreme than the predictions from most hydrodynamical simulations. We constrain the baryon fractions and the gas mass fractions and find them to be generally lower than inferred from X-ray observations and simulation predictions. We conclude that the WL + kSZ measurements provide a new and complementary benchmark for building a coherent picture of the impact of gas around galaxies across observations.

79 ASTRONOMY AND ASTROPHYSICS↗

Simulating Crystallization in a Colloidal System Using State Predictive Information Bottleneck Based Enhanced Sampling

Here, we investigate crystal nucleation in supersaturated colloid suspensions using enhanced molecular dynamics simulations augmented with machine learning techniques. The simulations reveal that crystallization in the model colloidal system studied here, with particles interacting through a repulsive screened Coulomb Yukawa potential, proceeds from vapor to dense liquid droplet to crystalline phases across multiple high barriers. Employing a one-dimensional reaction coordinate derived from the State Predictive Information Bottleneck framework, our simulations capture back-and-forth phase transitions across multiple barriers effectively in biased metadynamics simulations. We obtain relative free energy differences between different phases and also quantify the roles of different molecular level features in driving the phase changes.

Chemistry↗

Multi-fidelity uncertainty quantification strategies for large-scale multiphysics applications: PSAAP II particle-based solar energy receiver

The study of complex systems is often based on computationally intensive, high-fidelity, simulations. To build confidence or improve the prediction accuracy of such simulations, the impact of uncertainties in model inputs, or even the structure of the models, on the quantities of interest must be measured. This, however, requires a computational budget that is a possibly large multiple of the cost of a single simulation, and thus may become infeasible for expensive simulation models featuring a large number of uncertain inputs and highly non-linear behavior. Therefore, this work explores multi-fidelity strategies to accelerate the estimation of the effect of uncertainties. The main idea behind multi-fidelity methods is to utilize cheaper, lower-fidelity models – than the intended high-fidelity, expensive model of the problem – to generate a baseline solution that together with relatively small number of high-fidelity simulations can lead to accurate predictions. The methods are briefly presented, and their performance assessed on an irradiated particle-laden turbulent flow case related to Stanford’s PSAAP II particle-based solar energy receiver.

Physics↗

Gaussian Process Emulators for Volcanic Ash Dispersion Model Tephra2

It is necessary to predict volcanic ash deposition since falling ash is harmful to human activities. Because simulators built for this purpose are computationally expensive, it is popular to use statistical emulators for geophysical hazard analyses, where a large number of simulations are required. Gaussian stochastic process emulators are able to approximate expensive simulations in an accurate and efficient way. Using a relatively small number of simulation runs, a well-trained emulator can accurately predict simulation outputs at massive new input points in a few seconds. Under different explosive eruption conditions, we constructed Gaussian stochastic process emulators for Tephra2, a simulation tool for estimating the accumulation of volcanic ash over a region. Historical wind records are used as input wind data, without assuming a Gaussian wind speed profile or common wind direction among elevations. While there are several inputs for Tephra2, we use no more than three physically motivated variables as emulator inputs to reduce the computational cost of emulations. The emulator outputs predict the mass of tephra per unit area at 50281 grid points around a predetermined vent location.

58 GEOSCIENCES↗

Plasma Surface Interactions: Bridging from the Surface to the Micron Frontier through Leadership Class Computing (Final Technical Progress Report)

The performance demands on plasma-facing components (PFCs) in future fusion power plants are beyond the capability of current materials. In defining the plasma-surface interaction (PSI), it is evident that three coupled spatial regions influence PFC materials evolution and performance. These regions consist of (1) the edge and scrape-off layer region of the plasma, (2) the near-surface material response to extreme thermal and particle fluxes under the influence of, and feedback to, the plasma sheath, and (3) the structural material’s response to an intense, 14 MeV peaked neutron spectrum, which produces very high concentrations of transmuted elements through (n,p) and (n,α) reactions and structural material property degradation. The objective of this project is to develop and deploy validated, high-performance simulation tools capable of predicting the performance of tungsten-based plasma-facing components (PFCs) in a burning fusion plasma environment, which includes modeling surface morphology evolution in either erosion or re-deposition regimes, and the recycling of hydrogen species. This requires the development of a leadership-scale computational code to predict PFC behavior that is well integrated to a suite of multiscale modeling techniques to bridge the scales needed to address complex physical and computational issues at the plasma surface interface and the transition region below the surface where neutron damage processes in the bulk dominate material behavior. Successful completion of this project will provide PFC simulation tools to evaluate steady-state performance of tungsten-based PFC and divertor components in burning plasma environments. This will enable the identification of critical experiments to confirm whether practical PFC solutions exist for magnetic fusion energy beyond ITER. More specifically, the research activities within this project focus on two broadly defined research thrusts: 1) Developing a new simulation code, Xolotl-PSI to predict PFC operating lifetime and performance, that is specifically designed to take advantage of leadership class computing facilities; and 2) Integrating and applying discrete particle-based, as well as continuum-based, multiscale modeling techniques to provide scientific discovery of the mechanisms controlling PFC and bulk materials evolution under fusion plasma and 14-MeV neutron exposure; in this thrust, the challenge of scale-bridging between atomistic/microstructural modeling and the continuum-scale of PFC device performance is achieved through multiscale modeling techniques. Throughout the grant period, research at UMass Amherst focused on the atomic-scale analysis of the dynamics and kinetics (transport and reactions) of small mobile helium clusters near surfaces and grain boundaries in plasma-exposed tungsten, as well as the proper parameterization and incorporation of these processes into our SciDAC team’s continuum-level cluster dynamics code (Xolotl). Our work also included characterization of large-scale molecular-dynamics (MD) simulation results of helium implantation into tungsten based on the findings of our analysis and comparisons of Xolotl simulation predictions with the large-scale MD simulation results for Xolotl validation purposes; emphasis was placed on the impact of helium cluster dynamics/kinetics on tungsten surface morphology, near-surface tungsten structure, and helium retention. Furthermore, our work included initiation of a research program on evaluating the impact of structural defects in tungsten due to plasma exposure (such as helium nanobubbles) on tungsten’s thermophysical properties, focusing on lattice thermal conductivity. Our studies contributed to a fundamental understanding of the effects of plasma-surface interactions on the dynamical response of plasma-facing materials in nuclear fusion devices and the development of predictive hierarchical multiscale computational tools for the quantitative description of the material’s dynamical response to plasma exposure.

36 MATERIALS SCIENCE↗

Comparison of Wind Farm Layout Optimization Results Using a Simple Wake Model and Gradient-Based Optimization to Large-Eddy Simulations: Preprint

Comparison of wind farm layout optimization results with simulations or wind tunnel tests is important because the models used during optimization use simplifying assumptions that can alter the design space. Some of the characteristics of the simple models may negatively influence the resulting layouts. In this paper we perform wind farm layout optimization and compare the resulting improvements to large eddy simulation (LES) results. We begin by describing the models used, including changes specific for use with gradient-based optimization. We then compare our version of the models with the original versions and large eddy simulation LES) data from previous publications. Using the models described, we performed gradient-based wind farm layout optimization, using exact gradients, and compare the results to LES simulations. The models predicted an improvement in annual energy production (AEP) of 7.4%, while the LES reported an AEP improvement of 9:9%. We conclude that the improvements found by optimizing with the simple models are not just an artifact of the models, but are real improvements.

17 WIND ENERGY↗

Mesoscale Simulations of a Wind Ramping Event for Wind Energy Prediction

Ramping events, or rapid changes of wind speed and wind direction over a short period of time, present challenges to power grid operators in regions with significant penetrations of wind energy in the power grid portfolio. Improved predictions of wind power availability require adequate predictions of the timing of ramping events. For the ramping event investigated here, the Weather Research and Forecasting (WRF) model was run at three horizontal resolutions in 'mesoscale' mode: 8100m, 2700m, and 900m. Two Planetary Boundary Layer (PBL) schemes, the Yonsei University (YSU) and Mellor-Yamada-Janjic (MYJ) schemes, were run at each resolution as well. Simulations were not 'tuned' with nuanced choices of vertical resolution or tuning parameters so that these simulations may be considered 'out-of-the-box' tests of a numerical weather prediction code. Simulations are compared with sodar observations during a wind ramping event at a 'West Coast North America' wind farm. Despite differences in the boundary-layer schemes, no significant differences were observed in the abilities of the schemes to capture the timing of the ramping event. As collaborators have identified, the boundary conditions of these simulations probably dominate the physics of the simulations. They suggest that future investigations into characterization of ramping events employ ensembles of simulations, and that the ensembles include variations of boundary conditions. Furthermore, the failure of these simulations to capture not only the timing of the ramping event but the shape of the wind profile during the ramping event (regardless of its timing) indicates that the set-up and execution of such simulations for wind power forecasting requires skill and tuning of the simulations for a specific site.

17 WIND ENERGY↗

FY10 Report on Multi-scale Simulation of Solvent Extraction Processes: Molecular-scale and Continuum-scale Studies

This task is aimed at predictive modeling of solvent extraction processes in typical extraction equipment through multiple simulation methods at various scales of resolution. We have conducted detailed continuum fluid dynamics simulation on the process unit level as well as simulations of the molecular-level physical interactions which govern extraction chemistry. Through combination of information gained through simulations at each of these two tiers along with advanced techniques such as the Lattice Boltzmann Method (LBM) which can bridge these two scales, we can develop the tools to work towards predictive simulation for solvent extraction on the equipment scale (Figure 1). The goal of such a tool-along with enabling optimized design and operation of extraction units-would be to allow prediction of stage extraction effrciency under specified conditions. Simulation efforts on each of the two scales will be described below. As the initial application of FELBM in the work performed during FYl0 has been on annular mixing it will be discussed in context of the continuum-scale. In the future, however, it is anticipated that the real value of FELBM will be in its use as a tool for sub-grid model development through highly refined DNS-like multiphase simulations facilitating exploration and development of droplet models including breakup and coalescence which will be needed for the large-scale simulations where droplet level physics cannot be resolved. In this area, it can have a significant advantage over traditional CFD methods as its high computational efficiency allows exploration of significantly greater physical detail especially as computational resources increase in the future.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Laser propagation in a subcritical foam: Subgrid model

Here, we present a subgrid model for laser propagation in a subcritical foam. Our model describes the expansion of laser-irradiated foam elements that are below the resolution of the simulation grid and predicts the plasma conditions that result from burning down the foam. Our model can be included as a module within a larger multiphysics code, and we have implemented it within the code pF3D, which is used for simulating a laser-plasma interaction. The model predicts a reduced propagation velocity for a laser through a subcritical foam compared to simulating that foam as a homogeneous gas. This is attributed to the laser energy that goes into burning down the foam microstructure. We compare our model against experimental data by simulating a 2 mg/cc SiO 2 foam shot performed at the Janus laser facility at the Lawrence Livermore National Laboratory. pF3D simulations with the foam model predict hot ion temperatures. This leads to a reduction in the level of stimulated Brillouin scattering (SBS), bringing the simulated level of SBS into agreement with the data. Intensity fluctuations at the foam front due to laser speckles and refraction result in ion temperature fluctuations when the foam burns down. These drive long-lived electron density fluctuations on scales that are large compared to the pore size.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Measurements and predictions of wind turbine tower shadow and fairing effects

Downwind two-bladed rotor configurations can have advantages in reducing rotor mass for wind turbines, compared with three-bladed upwind designs. However, the tower shadow adds an aerodynamic complication that can be difficult to quantify and predict. This study presents and analyzes a previously unpublished subset of data collected during an extensive wind tunnel campaign, the Unsteady Aerodynamic Experiment (UAE). At high tip speed ratios, the tower shadow is a dominating contributor to bending moment oscillations but can be mitigated by the use of a tower fairing when such a fairing is aligned with the flow. At lower tip speed ratios where the blades can undergo aerodynamic stall and hysteresis, tower shadow was only a secondary contributor to bending moments and the tower fairing did not significantly impact bending moments. The aeroelastic simulation code called FAST was used to predict the same experimental conditions. In general, simulations reasonably predicted most of the cycle-averaged aspects, but only qualitatively predicted the unsteady variations due to tower shadow. To improve simulation predictions inside the tower wake, it is suggested that future work model the unsteady wake component associated with cylinder shedding and to consider a wake model for tower fairings at various wind incidence angles.

17 WIND ENERGY↗

Sensitivity Analysis of Wind and Turbulence Predictions With Mesoscale‐Coupled Large Eddy Simulations Using Ensemble Machine Learning

Abstract Coupling between mesoscale models and large‐eddy simulation (LES) models is increasingly used to more realistically represent the wide range of scales of atmospheric motions affecting boundary layer winds and turbulence that need to be simulated accurately for applications such as wind energy. However, such mesoscale‐to‐microscale coupled modeling frameworks are potentially affected by a large number of uncertain closure parameters. Here, we investigate the sensitivity associated with six closure parameters related to a 1.5‐order subgrid‐scale turbulence closure for an ensemble of mesoscale‐coupled LES. The simulations are performed using the Weather Research and Forecasting model nested from horizontal resolutions of greater than a kilometer down to tens of meters. Closure parameters are varied to generate perturbed parameter ensembles for two case studies of highly sheared, convective boundary layers observed in the Columbia Basin of Oregon and Washington during the Second Wind Forecast Improvement Project. Machine learning algorithms are used to explore the sensitivity of LES predictions, considering the effects of the perturbed physical parameters alongside categorical factors such as the case study identity, measurement location, and LES resolution. For the conditions we examine, a single parameter, the eddy viscosity coefficient, is the dominant source of parametric sensitivity and its importance is comparable to the categorical factors for several of the simulation response variables we examine.

54 ENVIRONMENTAL SCIENCES↗

Correlated Anion Disorder in Heteroanionic Cubic TiOF 2

Resolving anion configurations in heteroanionic materials is crucial for understanding and controlling their properties. For anion-disordered oxyfluorides, conventional Bragg diffraction cannot fully resolve the anionic structure, necessitating alternative structure determination methods. We have investigated the anionic structure of anion-disordered cubic (ReO 3 -type) TiOF 2 using X-ray pair distribution function (PDF), 19 F MAS NMR analysis, density functional theory (DFT), cluster expansion modeling, and genetic-algorithm structure prediction. Our computational data predict short-range anion ordering in TiOF 2 , characterized by predominant cis-[O 2 F 4 ] titanium coordination, resulting in correlated anion disorder at longer ranges. To validate our predictions, we generated partially disordered supercells using genetic-algorithm structure prediction and computed simulated X-ray PDF data and 19 F MAS NMR spectra, which we compared directly to experimental data. To construct our simulated 19 F NMR spectra, we derived new transformation functions for mapping calculated magnetic shieldings to predicted magnetic chemical shifts in titanium (oxy)fluorides, obtained by fitting DFT-calculated magnetic shieldings to previously published experimental chemical shift data for TiF 4 . We find good agreement between our simulated and experimental data, which supports our computationally predicted structural model and demonstrates the effectiveness of complementary experimental and computational techniques in resolving anionic structure in anion-disordered oxyfluorides. From additional DFT calculations, we predict that increasing anion disorder makes lithium intercalation more favorable by, on average, up to 2 eV, highlighting the significant effect of variations in short-range order on the intercalation properties of anion-disordered materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗