Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “oxide interfaces”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,621 records · Page 90

Diffusion and impurity segregation in hydrogen-implanted silicon carbide

Diffusion and segregation behavior of hydrogen and oxygen in silicon carbide subjected to H implantation and subsequent annealing were studied with a number of analytical techniques including Secondary Ion Mass Spectrometry (SIMS), Rutherford backscattering spectrometry in channeling geometry, field emission scanning electron microscopy, optical microscopy, cross-sectional transmission electron microscopy, and atomic force microscopy. H{sup +} implantation was carried out with energies of 200 keV, 500 keV, or 1 MeV to doses of 1 × 10{sup 16}, 1 × 10{sup 17}, or 2 × 10{sup 17} ion/cm{sup 2}, and thermal treatment was conducted in flowing argon for 1 to 2 h at temperatures of 740, 780, 1000, or 1100 °C. The process of migration and eventual loss of hydrogen in a point defect regime is postulated to proceed to a large extent through ionized vacancies. This conclusion was derived from the observed substantial difference in H mobilities in n- vs. p-type SiC as the population of ionized vacancies is governed by the Fermi-Dirac statistics, i.e., the position of the Fermi level. For higher doses, a well defined buried planar zone forms in SiC at the maximum of deposited energy, comprising numerous microvoids and platelets that are trapping sites for hydrogen atoms. At a certain temperature, a more or less complete exfoliation of the implanted layer is observed. For a 1 MeV implant heated to 1100 °C in nominally pure argon, SIMS profiling reveals a considerable oxygen peak of 10{sup 16} O atoms/cm{sup 2} situated at a depth close to that of the peak of the implanted H{sup +}. Similarly, 1100 °C annealing of a 200 keV implant induces the formation of a thin oxide (4 nm), located at the interface between the implanted layer and the substrate as evidenced by both SIMS and HRTEM. The measurements were taken on the part of the sample that remained un-exfoliated. In view of a lack of convincing evidence that a hexagonal SiC might contain substantial amounts of oxygen, further investigation is under way to elucidate its presence in the irradiation-damaged films.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Interfacial degradation effects of aqueous solution-processed molybdenum trioxides on the stability of organic solar cells evaluated by a differential method

The authors investigate the influence of two hole interfacial materials poly (3,4-ethylenedioxythiophene):poly (styrenesulfonate) (PEDOT:PSS) and aqueous solution-processed MoO{sub 3} (sMoO{sub 3}) on cell stability. sMoO{sub 3}-based device demonstrated obviously improved stability compared to PEDOT:PSS-based one. Current-voltage characteristics analysis is carried out to investigate the effect of the hole interfacial layers on the cell stability. The formation of additional trap states at the interfaces between the hole interfacial layer and the active layer in degraded devices is verified by a differential method. Improved cell stability is attributed to a relatively stable sMoO{sub 3} interfacial layer compared to PEDOT:PSS by comparing their different trap states distributions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Thermal annealing study on P3HT: PCBM based bulk heterojunction organic solar cells using impedance spectroscopy

Recently, Thermal annealing is an important process for bulk heterojunction organic solar cells (BHJ OSCs) to improve the device efficiency and performance of the organic solar cells. Here in, we have examined the changes in the efficiency and morphology of P3HT: PCBM film according to the thermal annealing temperature to find the changes during the annealing process by measuring the optical absorption, atomic force microscope and X-ray diffraction. We also investigated the effect of different annealing process conditions (without, pre- and post-annealing) on the device performance of the inverted bulk heterojunction organic solar cells consist the structure of ITO/ ZnO / P3HT: PCBM / MoO{sub 3}/ Al by measuring AC impedance characteristics. Particularly, the power conversion efficiency (PCE), crystalline nature of the polymer, light absorption and the surface smoothness of P3HT: PCBM films are significantly improved after the annealing process. These results indicated the improvement in terms of PCE, interface smoothness between the P3HT: PCBM and MoO{sub 3} layers of the post annealed device originated from the decrease of series resistance between P3HT: PCBM layer and Al electrodes, which could be due to decrease in the effective life time of charge carriers.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Voltage-controlled inversion of tunnel magnetoresistance in epitaxial nickel/graphene/MgO/cobalt junctions

We report on the fabrication and characterization of vertical spin-valve structures using a thick epitaxial MgO barrier as spacer layer and a graphene-passivated Ni film as bottom ferromagnetic electrode. The devices show robust and scalable tunnel magnetoresistance, with several changes of sign upon varying the applied bias voltage. These findings are explained by a model of phonon-assisted transport mechanisms that relies on the peculiarity of the band structure and spin density of states at the hybrid graphene|Ni interface.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Fermi level pinning induced electrostatic fields and band bending at organic heterojunctions

The energy level alignment at interfaces between organic semiconductors is of direct relevance to understand charge carrier generation and recombination in organic electronic devices. Commonly, work function changes observed upon interface formation are interpreted as interface dipoles. In this study, using ultraviolet and X-ray photoelectron spectroscopy, complemented by electrostatic calculations, we find a huge work function decrease of up to 1.4 eV at the C{sub 60} (bottom layer)/zinc phthalocyanine (ZnPc, top layer) interface prepared on a molybdenum trioxide (MoO{sub 3}) substrate. However, detailed measurements of the energy level shifts and electrostatic calculations reveal that no interface dipole occurs. Instead, upon ZnPc deposition, a linear electrostatic potential gradient is generated across the C{sub 60} layer due to Fermi level pinning of ZnPc on the high work function C{sub 60}/MoO{sub 3} substrate, and associated band-bending within the ZnPc layer. This finding is generally of importance for understanding organic heterojunctions when Fermi level pinning is involved, as induced electrostatic fields alter the energy level alignment significantly.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Sharp chemical interface in epitaxial Fe{sub 3}O{sub 4} thin films

Chemically sharp interface was obtained on single phase single oriented Fe{sub 3}O{sub 4} (001) thin film (7 nm) grown on NiO (001) substrate using oxygen assisted molecular beam epitaxy. Refinement of the atomic structure, stoichiometry, and oxygen vacancies were determined by soft and hard x-ray photoelectron spectroscopy, low energy electron diffraction and synchrotron based X-ray reflectivity, and X-ray diffraction. Our results demonstrate an epitaxial growth of the magnetite layer, perfect iron stoichiometry, absence of oxygen vacancies, and the existence of an intermixing free interface. Consistent magnetic and electrical characterizations are also shown.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magnetic anisotropy of [Co{sub 2}MnSi/Pd]{sub n} superlattice films prepared on MgO(001), (110), and (111) substrates

Superlattice films with full-Heusler Co{sub 2}MnSi (CMS) alloy and Pd layers prepared on Pd-buffered MgO(001), (110), and (111) substrates were investigated. Crystal orientation and epitaxial relationship of Pd and CMS layers were analyzed from x-ray diffraction, pole figure measurements, and transmission electron microscope observation. Formation of the L2{sub 1}-ordered structure in the CMS layers was confirmed by observation of CMS(111) diffraction. Perpendicular magnetic anisotropy (PMA) was obtained in the [CMS (0.6 nm)/Pd (2 nm)]{sub 6} superlattice film formed using MgO(111) substrates although other superlattice films prepared using MgO(001) and (110) substrates showed in-plane and isotropic magnetic anisotropy, respectively. The perpendicular magnetic anisotropy energy constant K for the superlattice films prepared using MgO(111) substrate was estimated to be 2.3 Mergs/cm{sup 3}, and an interfacial anisotropy constant K{sub i} per one CMS-Pd interface in the superlattice films was estimated to be 0.16 ergs/cm{sup 2}. K{sub i} in superlattice films with various crystal orientations showed positive values, indicating that Pd/CMS interfaces had an ability to induce PMA regardless of their crystal orientation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Examination of the magnetism dynamics from intermixing effects in γ-Fe{sub 2}O{sub 3}/MnO core-shell nanoparticles

We have examined the effects of core-shell intermixing on the dynamical magnetism of γ-Fe{sub 2}O{sub 3}/MnO nanoparticles. The core and shell phases were identified using x-ray diffraction, and x-ray absorption spectroscopy identified Mn ions in both octahedral and tetrahedral sites, consistent with a significant amount of substitution at the core-shell interface to form an Fe/Mn-ferrite. The dynamical response was probed by Mössbauer spectroscopy, which decouples surface and core spins, and suggested a change in the relaxation behaviour among the spin populations within γ-Fe{sub 2}O{sub 3}/MnO relative to the γ-Fe{sub 2}O{sub 3} seed particles. Interestingly, the magnetic relaxation effects at the atomic scale, measured via Mössbauer spectroscopy, were enhanced, indicating that the addition of an MnO shell and intermixing affected the dynamical freezing process which altered the surface magnetism of the γ-Fe{sub 2}O{sub 3} core. Our results show that both the MnO shell and the interfacial intermixed layer are important in determining the core-shell nanoparticle magnetism.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Reliable four-point flexion test and model for die-to-wafer direct bonding

For many years, wafer-to-wafer (W2W) direct bonding has been very developed particularly in terms of bonding energy measurement and bonding mechanism comprehension. Nowadays, die-to-wafer (D2W) direct bonding has gained significant attention, for instance, in photonics and microelectro-mechanics, which supposes controlled and reliable fabrication processes. So, whatever the stuck materials may be, it is not obvious whether bonded D2W structures have the same bonding strength as bonded W2W ones, because of possible edge effects of dies. For that reason, it has been strongly required to develop a bonding energy measurement technique which is suitable for D2W structures. In this paper, both D2W- and W2W-type standard SiO{sub 2}-to-SiO{sub 2} direct bonding samples are fabricated from the same full-wafer bonding. Modifications of the four-point flexion test (4PT) technique and applications for measuring D2W direct bonding energies are reported. Thus, the comparison between the modified 4PT and the double-cantilever beam techniques is drawn, also considering possible impacts of the conditions of measures such as the water stress corrosion at the debonding interface and the friction error at the loading contact points. Finally, reliability of a modified technique and a new model established for measuring D2W direct bonding energies is demonstrated.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Non-proportionality of magnetic anisotropy and damping in CoFeB/MgO-based systems

We study the relationship between anisotropy K and damping α in MgO/CoFeB/Ta/CoFeB/MgO/cap films using vector network analyzer ferromagnetic resonance. Capping the stack with Ta and changing the thickness of the top MgO layer allow us to create significant variations in anisotropy while keeping the thickness and process conditions of the magnetic layer constant. The change in anisotropy can be attributed to the degradation of the CoFeB/MgO interface due to Ta intermixing with MgO upon deposition. This hypothesis is supported by measurements of similar samples with the bottom MgO thickness varied instead, which exhibit no significant change in anisotropy. This method of varying K allows identifying a regime where a spin reorientation transition occurs while α remains constant, proving the non-proportionality of K and α in perpendicular CoFeB/MgO systems. The effects of changing the capping layer material, notably Ru, are also discussed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Controlling magnetic domain wall motion in the creep regime in He{sup +}-irradiated CoFeB/MgO films with perpendicular anisotropy

This study presents the effective tuning of perpendicular magnetic anisotropy in CoFeB/MgO thin films by He{sup +} ion irradiation and its effect on domain wall motion in a low field regime. Magnetic anisotropy and saturation magnetisation are found to decrease as a function of the irradiation dose which can be related to the observed irradiation-induced changes in stoichiometry at the CoFeB/MgO interface. These changes in the magnetic intrinsic properties of the film are reflected in the domain wall dynamics at low magnetic fields (H) where irradiation is found to induce a significant decrease in domain wall velocity (v). For all irradiation doses, domain wall velocities at low fields are well described by a creep law, where Ln(v) vs. H{sup −1∕4} behaves linearly, up to a maximum field H*, which has been considered as an approximation to the value of the depinning field H{sub dep}. In turn, H* ≈ H{sub dep} is seen to increase as a function of the irradiation dose, indicating an irradiation-induced extension of the creep regime of domain wall motion.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Annealing effects on recombinative activity of nickel at direct silicon bonded interface

By performing capacitance transient analyses, the recombination activity at a (110)/(100) direct silicon bonded (DSB) interface contaminated with nickel diffused at different temperatures, as a model of grain boundaries in multicrystalline silicon, was studied. The trap level depth from the valence band, trap density of states, and hole capture cross section peaked at an annealing temperature of 300 °C. At temperatures ⩾400 °C, the hole capture cross section increased with temperature, but the density of states remained unchanged. Further, synchrotron-based X-ray analyses, microprobe X-ray fluorescence (μ-XRF), and X-ray absorption near edge structure (XANES) analyses were performed. The analysis results indicated that the chemical phase after the sample was annealed at 200 °C was a mixture of NiO and NiSi{sub 2}.

36 MATERIALS SCIENCE↗

Interface properties of Si-SiO{sub 2}-Ta{sub 2}O{sub 5} structure by cathodoluminescence spectroscopy

We studied formation of the SiO{sub 2}-T{sub 2}O{sub 5} interface in the Si-SiO{sub 2}-Ta{sub 2}O{sub 5} structure using Cathodoluminescence Spectroscopy (CLS). Analyzing the evolution of CLS spectrum of the Si-SiO{sub 2} structure while depositing the Ta{sub 2}O{sub 5} layer allowed to estimate an optical transmittance of the Ta{sub 2}O{sub 5} layer and its band gap. Spectral features related to the formation of the SiO{sub 2}-Ta{sub 2}O{sub 5} interface were identified by comparison of the experimental CL spectrum of the Si-SiO{sub 2}-Ta{sub 2}O{sub 5} structure and its simulated counterpart. This formation involves a decomposition of silanol groups at the outer surface of the SO{sub 2} layer and creation of the Si{sub x}Ta{sub y}O-type layer containing luminescence centers with the emission band centered at 3 eV photon energy.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Atomic resolution strain analysis in highly textured FePt thin films

In this work, we present a detailed investigation of FePt-substrate interfaces and their influence towards the microstructural and magnetic configurations of the resulting metallic films. Discontinuous FePt films of roughly 15 nm thickness are deposited at 750 °C on MgO, MgAl{sub 2}O{sub 4}, SrTiO{sub 3}, and (La,Sr)(Al,Ta)O{sub 3} single-crystalline substrates. All of these films mainly show out-of-plane textured FePt islands; however, fractions of L1{sub 2} and in-plane oriented crystals are observed for the films on substrates with reduced lattice mismatch. Reduced easy axis coercivities and enhanced hard axis remanence values affirm this observation. Moreover, quantitative high-resolution transmission electron microscope analysis reveals that the reduced lattice mismatch results in a decreased density of dislocations, especially misfit dislocations, at the FePt-substrate interface. To further extend the research, carbon-doped FePt+32%C films are deposited on single-crystalline and sputtered MgO at 750 °C and 650 °C, respectively, to characterize the influence of a segregating media and reduced grain size. A comparison to the pure FePt sample reveals that the presence of seed layer grain boundaries leads to an increased fraction of in-plane oriented material, while the density of misfit dislocations solely depends on the degree of lattice mismatch.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effect of heavy metal layer thickness on spin-orbit torque and current-induced switching in Hf|CoFeB|MgO structures

We study the heavy metal layer thickness dependence of the current-induced spin-orbit torque (SOT) in perpendicularly magnetized Hf|CoFeB|MgO multilayer structures. The damping-like (DL) current-induced SOT is determined by vector anomalous Hall effect measurements. A non-monotonic behavior in the DL-SOT is found as a function of the thickness of the heavy-metal layer. The sign of the DL-SOT changes with increasing the thickness of the Hf layer in the trilayer structure. As a result, in the current-driven magnetization switching, the preferred direction of switching for a given current direction changes when the Hf thickness is increased above ∼7 nm. Although there might be a couple of reasons for this unexpected behavior in DL-SOT, such as the roughness in the interfaces and/or impurity based electric potential in the heavy metal, one can deduce a roughness dependence sign reversal in DL-SOT in our trilayer structure.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Symmetry-resolved CO desorption and oxidation dynamics on O/Ru(0001) probed at the C K-edge by ultrafast X-ray spectroscopy

In this work, we report on carbon monoxide desorption and oxidation induced by 400 nm femtosecond laser excitation on the O/Ru(0001) surface probed by time-resolved X-ray absorption spectroscopy (TR-XAS) at the carbon K-edge. The experiments were performed under constant background pressures of CO (6x10 -8 Torr) and O 2 (3x10 -8 Torr). Under these conditions, we detect two transient CO species with narrow 2π* peaks, suggesting little 2π* interaction with the surface. Based on polarization measurements, we find that these two species have opposing orientations: (1) CO favoring a more perpendicular orientation and (2) CO favoring a more parallel orientation with respect to the surface. We also directly detect gas-phase CO 2 using a mass spectrometer and observe weak signatures of bent adsorbed CO 2 at slightly higher X-ray energies than the 2π* region. These results are compared to previously reported TR-XAS results at the O K-edge where the CO background pressure was three times lower (2x10 -8 Torr) while maintaining the same O 2 pressure. At the lower CO pressure, in the CO 2π* region, we observed adsorbed CO and a distribution of OC-O bond lengths close to the CO oxidation transition state, with little indication of gas-like CO. The shift towards 'gas-like' CO species may be explained by the higher CO exposure, which blocks O adsorption, decreasing O coverage and increasing CO coverage. These effects decrease the CO desorption barrier through dipole-dipole interaction, while simultaneously increasing the CO oxidation barrier.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Epitaxial (Al x Ga 1-x-y In y ) 2 O 3 Alloys Lattice Matched to Monoclinic Ga 2 O 3 Substrates

We have epitaxially stabilized a series of monoclinic (Al x Ga 1-x-y In y ) 2 O 3 alloys by careful choice of molecular beam epitaxy growth conditions, which balance alloy growth with suboxide desorption. The films are pseudomorphic to (010) β-Ga 2 O 3 substrates at thicknesses up to 150 nm with compositions ranging from (Al 0.01 Ga 0.83 In 0.16 ) 2 O 3 to (Al 0.24 Ga 0.75 In 0.03 ) 2 O 3 . The absorption edge shifts from approximately 4.62-5.14 eV with coincidently increasing Al and decreasing In mole fractions. J-V measurements reveal an increase in resistivity over four orders of magnitude with a maximum value of 4.2 x 10 5 Ω-cm for (Al 0.17 Ga 0.76 In 0.07 ) 2 O 3 , which has nearly identical lattice parameters (both in-plane and out-of-plane) to the underlying β-Ga 2 O 3 . Scanning transmission electron microscopy of this sample reveals a mostly uniform and single crystalline film, though we identify areas of non-uniform In incorporation and some γ-phase inclusions. This work demonstrates the feasibility of thick layers lattice-matched to β-Ga 2 O 3 with increased bandgap compared to phase-separation limited (Al,Ga) 2 O 3 . These alloys can enable higher bandgap epitaxial dielectrics and high sheet charge density transistors by increasing the conduction band offset with respect to β-Ga 2 O 3 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Repulsive and attractive Casimir interactions in liquids

The Casimir interactions in solid-liquid-solid systems as a function of separation distance have been studied by the Lifshitz theory. The dielectric permittivity functions for a wide range of materials are described by Drude, Drude-Lorentz, and oscillator models. We find that the Casimir forces between gold and silica or MgO materials are both repulsive and attractive. We also find the stable forms for the systems. Our studies would provide good guidance for future experimental studies on dispersion interactions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗