Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “oregon”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,621 records · Page 90
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Architected Liquid Crystal Elastomer Lattices with Programmable Energy Absorption

Architected LCE lattices are fabricated with flow-induced alignment via direct ink writing and systematically characterized their shape morphing, stiffness, and energy absorption behavior across strain rates spanning six orders of magnitude from 10 −3 to 10 3 s −1 . It is shown that architected liquid crystal elastomer (LCE) lattices exhibit superior energy absorption compared to their non-mesogenic (silicone) counterparts. Importantly, the LCE-to-silicone energy absorption ratios are up to 18-fold higher at the highest strain rate tested. A finite element model that captures their shape-morphing response is developed, which exhibits excellent agreement with the experimental observations. In conclusion, the work opens new avenues for designing and fabricating LCE lattices with programmable alignment, shape morphing, and mechanics.

active lattices↗
DOE OSTI2025

Constructing Highly Durable Fuel Cell Catalysts Through Integrating Graphitic Shell‐Protected Composite Carbon Support with Gaseous Co Deposition‐Driven PtCo Intermetallics

Metal dissolution, nanoparticle agglomeration, and carbon support corrosion cause significant performance degradation of current PtCo catalysts under acidic and oxidative oxygen reduction reaction. Here, in this study, an integrated strategy is presented to design high-performance Pt 3 Co intermetallic catalysts by regulating gaseous Co deposition-driven diffusion into Pt nanoparticles supported on a composite carbon. The composite carbon is derived from ZIF-8/polyaniline, consisting of a high-surface-area (HSC) core and a protective graphitic shell (GS), which is employed to design 40 wt.% Pt/HSC@GS catalyst. The corresponding membrane electrode assemblies (MEAs) can maintain 1.09 A cm −2 at 0.7 V (20. 7% loss) after 10 000 cycles (1.0–1.5 V for carbon stability) and 1.15 A cm −2 (16.1% loss) after 150 000 cycles (0.60–0.95 V for catalyst stability). A ordered Pt 3 Co intermetallic is synthesized via a gaseous Co-deposition process, which yields a homogeneous Co-rich layer onto the Pt nanoparticles on the composite support, thereby facilitating Co diffusion into Pt crystal during subsequent ordering annealing to form the ordered intermetallic structure. This gaseous deposition leads to a thin carbon layer on PtCo nanoparticles, inhibiting particle growth during the annealing and mitigating Co dissolution under dynamic electrochemical conditions. The PtCo catalyst achieves impressive MEA performance and long-term durability (1.45 A cm −2 at 0.7 V after 120 000 cycles) under heavy-duty conditions.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2025

Recent Progress in Solid‐State Lithium Batteries through Cathode Microstructure Engineering

A high‐performance cathode is necessary to realize the great potentials of solid‐state batteries such as high energy density and long cycle life. It is also needed to validate electrolyte performance, which is lacking. Currently, cathodes for solid‐state batteries are thinner and have lower cathode active material content than their lithium‐ion battery counterpart, resulting from insufficient conductivity and limiting the battery energy density. This review article provides an overview of recent development in cathode microstructures and their impact on battery properties, including compatibility between cathode and electrolyte, cathode architecture design, interface engineering, correlation between material properties, cathode processing approaches, and performance, as well as the advanced characterization methods used to understand the above correlations . Some perspectives on future development are shared including utilizing in situ and operando characterization tools to better understand dynamic evolution of the cathode/electrolyte interface, adapting artificial intelligence and machine learning to design and optimize cathode structures. The article is aimed to promote research interest on cathode development and advance solid‐state battery technologies.

cathode engineering↗
DOE OSTI2025

Performance Comparisons for Artificially Propagated and Wild Pacific Lamprey Juveniles and Larvae

ABSTRACT Artificially propagated Pacific lamprey ( Entosphenus tridentatus ) are produced for restoration and for use in dam passage studies to reduce the demand for wild fish. Such uses require that animals are representative of their wild counterparts. Previous work indicated that this is true for Pacific lamprey larvae and juveniles reared in the hatchery with respect to the length of sustained swimming. However, more subtle differences in behaviour and performance that lamprey need to survive have not been assessed. In this study, artificially propagated and wild fish were compared in laboratory tests under no‐flow conditions to examine light avoidance, burrowing speed, burst swim speed, volitional routine swim speed and time to come to rest. Most larvae burrowed in less than a minute, and we found highly significant differences ( p < 0.001) between artificially propagated and wild larvae burrowing times, a critical escape behaviour. This could have implications for studies of larval entrainment at irrigation diversion canals or in turbine boils at dams. Interestingly, all of the wild juveniles tested came to rest quickly after introduction to the chamber (1.5 min), while artificially propagated lamprey swam robotically near the surface and 48% did not come to rest in the first 10 min (median time to rest = 9.5 min). In contrast, wild juveniles quickly (median = 1.47 min) sought areas near the tank bottom and attached strongly with their oral disc. Such behavioural differences could have important survival consequences for artificially propagated lamprey as they approach turbine intakes, bypass screens and irrigation diversion headgates. This study highlights the need to conduct behavioural assays that examine subtleties of fish behaviour that can be missed with traditional swim tunnel comparisons.

Frick, Kinsey [Fish Ecology Division, Northwest Fi↗
DOE OSTI2025

Drivers of Historical and Future Coastal Runoff Across the Arctic and Sub‐Arctic Subregions of Alaska, USA

This study investigates historical and future coastal runoff across the Arctic and sub-Arctic subregions of Alaska, USA, emphasising changes in terrestrial hydrology and their implications for coastal discharge. Using the physically based SnowModel-HydroFlow framework, historical (1991–2020) and future (2071–2100) coastal discharge climatologies were simulated, incorporating meteorological, topographic, and land cover inputs. Results reveal distinct seasonal and spatial patterns in temperature, precipitation, and snow dynamics across the Beaufort, Chukchi, Yukon, and Bristol subregions. Future projections suggest significant warming and shifts in hydrological regimes, such as increased annual precipitation and coastal discharge totals. Following a high emissions, business as usual pathway (SSP5-8.5), coastal discharge hydrographs in the Beaufort and Yukon subregions remain snow dominated with increases in discharge in nearly all months, while Chukchi and Bristol subregions shift from snow dominated to rain dominated. These changes are linked to rising temperatures, decreasing snow precipitation fractions, and altered freezing levels, with implications for water storage, timing, and availability. This research provides insights into the drivers and consequences of hydrological changes in a rapidly warming Arctic, supporting efforts to predict and mitigate the impacts on coastal and marine ecosystems.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Streptococcus pneumoniae HtrA is a dynamic and monomeric virulence factor capable of forming larger oligomeric complexes

Abstract High‐temperature requirement A (HtrA) proteases are a conserved family of serine proteases central to protein quality control and bacterial virulence. While Gram‐negative and human HtrAs are structurally well studied, Gram‐positive homologs remain essentially uncharacterized. Here, we present the first integrated structural and mechanistic analysis of a Gram‐positive HtrA, from Streptococcus pneumoniae , a virulence factor essential for adhesion and infection in vivo. Proteomic profiling of an htrA knockout and cleavage assays demonstrate that S. pneumoniae HtrA is required for protein quality control, with the PDZ domain mediating substrate recognition. Biochemically, S. pneumoniae HtrA exists exclusively as a monomer in solution, a striking divergence from canonical trimeric HtrAs that we show is shared with other Gram‐positive homologs. NMR analyses reveal that the monomer dynamically samples open and closed conformations, while cryo‐EM of a catalytic mutant identifies a hexamer stabilized by a unique LoopA–PDZ interaction. Together, these findings define S. pneumoniae HtrA as a dynamic monomer with interdomain coupling between its protease and PDZ domains, establishing Gram‐positive HtrAs as a mechanistically divergent subgroup within the HtrA family.

Lee, Eunjeong [Department of Biochemistry and Mole↗
DOE OSTI2025

Earth-scattering induced modulation in low-threshold dark matter experiments

Dark matter particles with sufficiently large interactions with ordinary matter can scatter in the Earth before reaching and scattering in a detector. This induces a modulation in the signal rate with a period of one sidereal day. We calculate this modulation for sub-GeV dark matter particles that interact either with a heavy or an ultralight dark-photon mediator and investigate the resulting signal in low-threshold detectors consisting of silicon, xenon, or argon targets. The scattering in the Earth is dominated by dark matter scatters off nuclei, while the signal in the detector is easiest to observe from dark matter scattering off electrons. We investigate the properties of the modulation signal and provide projections of the sensitivity of future experiments. We find that a search for a modulation signal can probe new regions of parameter space near the energy thresholds of current experiments, where the data are typically dominated by backgrounds.

Models for Dark Matter↗
DOE OSTI2024

Artificial Intelligence for the Electron Ion Collider (AI4EIC)

The Electron-Ion Collider (EIC), a state-of-the-art facility for studying the strong force, is expected to begin commissioning its first experiments in 2028. This is an opportune time for artificial intelligence (AI) to be included from the start at this facility and in all phases that lead up to the experiments. The second annual workshop organized by the AI4EIC working group, which recently took place, centered on exploring all current and prospective application areas of AI for the EIC. This workshop is not only beneficial for the EIC, but also provides valuable insights for the newly established ePIC collaboration at EIC. This paper summarizes the different activities and R&D projects covered across the sessions of the workshop and provides an overview of the goals, approaches and strategies regarding AI/ML in the EIC community, as well as cutting-edge techniques currently studied in other experiments.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2025

Preliminary studies on diversion and misuse for TRISO-fueled heat-pipe-cooled microreactors

Microreactors are being developed by multiple reactor designers to mass-produce nuclear facilities for worldwide deployment. Including microreactors in a country’s energy portfolio introduces new concerns for international safeguards regarding the number of reactor locations. Microreactors have smaller quantities of nuclear material compared to current light-water reactors, which makes diverting enough material for clandestine purposes difficult for a single reactor. Diversion or misuse of multiple microreactors to obtain a significant quantity introduces a new acquisition pathway. This work examines diversion and misuse scenarios for a realistic heat-pipe-cooled microreactor to understand how these scenarios would effect reactor operations to determine if monitoring key parameters could reduce the burden of inspection on monitoring agencies. Here, we determined misuse caused too drastic of an effect on core operations to be a valid acquisition pathway for the realistic heat-pipe-cooled microreactor. Diversion was explored across varying levels of severity, where potential diversion scenarios could yield one significant quantity of material from between six and eleven microreactors. Through examining the critical control drum angle, excess reactivity, control drum worth, and power distribution changes from nominal were detected over the operational lifetime, which could indicate a divergence from normal operations.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2025

Cation uptake by fine aggregate in hardened cement mortar and its effect on electrical properties

Electrical resistivity tests can be used to evaluate the transport properties of concrete and provide a durability assessment. However, the electrical resistivity is largely dependent on the pore solution composition and recent work suggests that some aggregates have the capacity for cation uptake. This study first aims to provide further evidence for adsorption of cations on aggregate surfaces, without formation of reaction products (e.g. alkali-silica reaction). Secondly, hardened mortar samples were prepared using a fine aggregate with a high alkali affinity and a non-reactive fine aggregate as a control. The electrical resistivity of mortars was measured, and the pore solution of these mortars was obtained through high-pressure extraction. The effect of aggregate moisture dilution on the pore solution was decoupled by using a pore partitioning model. The results indicate that aggregate minerology can influence the pore solution composition through cation uptake. Specific minerals of minor quantity, like biotite, may be responsible for cation exchange. While adsorbed cations strongly affected pore solution and formation factor measurement, the bulk resistivity measurements on hardened mortar were only marginally influenced. Research on other implications of similar aggregate interactions with pore solutions are an intriguing area for future research.

Alkali-aggregate reaction↗
DOE OSTI2025

Lowering the barrier to access information-rich transient kinetic data for machine learning methods

Transient kinetic data contain a wealth of information about intrinsic features of a catalyst as well as the reaction mechanism. Currently, high volume transient data is underutilized, and data science methods could both increase the value of information that can be extracted from this data, integrate experimental with theoretical data sources, and accelerate the pace of catalyst technology advancement. Transient kinetic characterizations with simple probe molecules exhibiting reversible adsorption, irreversible adsorption and bulk-surface diffusion are presented as training components for similar experiments with more complex surface reactions. In conclusion, by increasing the availability and accessibility of transient kinetic data through details of its structure and acquisition, we aim to decrease the barrier for data scientists to apply machine learning methods to this valuable data source.

Catalysis↗
DOE OSTI2026

A hybrid Penman-Monteith and machine learning model for simulating evapotranspiration and its components

Integrating physical processes with machine learning has advanced evapotranspiration (ET) simulation, yet most hybrid models fail to partition total ET into its components: soil evaporation (E) and vegetation transpiration (T). This study introduces Residual Neural Network–Penman–Monteith (RNN-PM), a novel hybrid dual-source ET model designed to overcome this limitation. The model synergizes the physically-based Penman–Monteith framework with three specialized residual neural networks trained to estimate key conductance parameters (canopy conductance, soil surface conductance, and aerodynamic conductance). Furthermore this explicit parameterization allows for the direct partitioning of total ET. Validation at National Ecological Observatory Network (NEON) flux sites using high-frequency partitioned E and T shows that RNN-PM reliably reproduces ET and the transpiration fraction (T/ET). For ET, the model achieves an average Kling–Gupta efficiency (KGE) of 0.89 and a root-mean-square error (RMSE) of 0.55 mm/day; for T/ET, the KGE is 0.87 with an RMSE of 0.06. Furthermore, RNN-PM demonstrates robust generalization, accurately simulating ET and its components well beyond the initial training dataset, even under extreme climatic conditions. This study extended the analysis by comparing the RNN-PM model with seven established dual-source ET models. The results indicate that RNN-PM outperforms both conventional machine learning models and purely physical process-based models in simulating ET components in most cases. Among the purely physical process-based dual-source models, those based on surface temperature decomposition showed improved performance as the leaf area index (LAI) decreased when evaluated against high-frequency ET component datasets. In contrast, the performance of conductance-based dual-source models declined with decreasing LAI. Although purely machine learning-based models can produce relatively accurate simulations of ET components, they often exhibit limited generalization capability, an issue that the RNN-PM model effectively overcomes. Ultimately, the RNN-PM model represents a significant advance in simulating ET components, offering a novel and scalable approach for improving the representation of land–atmosphere interactions in Earth system models.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

A snapshot of high-entropy alloy processing techniques and their effects on resulting mechanical properties

High-entropy alloys (HEAs) exhibit exceptional strength, corrosion resistance, and thermal stability, making them promising candidates for nuclear, aerospace, and other extreme applications. While most prior work has focused on compositional design, manufacturing techniques themselves can alter microstructure and mechanical properties as dramatically as alloy chemistry. This review compiles and compares the effects of processing routes—including arc melting, induction melting, mechanical alloying with spark plasma sintering, and additive manufacturing—on the structure and properties of HEAs. Quantitative comparisons highlight, for example, that SPS-processed alloys can achieve ∼20–45 % higher yield and tensile strength than arc-melted counterparts, while Bridgman solidification produces nearly single-crystal structures with elongation to failure exceeding 80 %. Additive manufacturing routes such as selective laser melting offer fine microstructures but also introduce anisotropy and porosity, leading to yield strengths spanning 100–600 MPa for the same composition. By synthesizing such results, this review provides actionable insight into how processing routes interact with HEA core effects (high entropy, lattice distortion, sluggish diffusion, and cocktail effect) to determine performance, thereby offering a practical guide for optimizing manufacturing strategies.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Fracture behavior of irradiation induced nanocrystalline UO 2 studied by in-situ mechanical testing in transmission electron microscopy

Uranium Dioxide (UO 2 ) is widely used as a fuel in current light water reactors (LWRs). Upon accumulation of radiation damage, LWR UO 2 fuel pellets start to develop a different microstructure at the pellet periphery when fuel burnup exceeds 45–50 GWd/tHM. The resulting porous, nanocrystalline microstructure is one of the most prominent microstructural changes occurring in such fuel. Its fracture mechanisms, which causes fuel fine fragmentation, could impact safety limits when the cladding breaches. Direct measurements of these properties are challenging, therefore a surrogate obtained via ion irradiation can be used. In this study, multiple microcantilevers were fabricated by focused ion beam from both fresh UO 2 and UO 2 irradiated with 84 MeV Xe 26+ ions to a peak dose of 1357 displacements per atom (dpa). Further, the irradiation produced a pseudo high burnup structure approximately 2 µm below the surface. In-situ nano-mechanical bending tests were conducted to investigate the fracture behavior and the effect of the surrogate UO 2 high burnup structure on local fracture properties. Fresh UO 2 fuel was observed to fracture in transgranular mode without nucleation or movement of dislocations. However, the Xe-irradiated nanocrystalline microcantilevers fractured along the grain boundaries, with no influence from the pre-existing micro-cracks in the microcantilever. Fracture toughness for this type of surrogate high burnup UO 2 structure is reported for the first time in literature. Both the fracture stress and toughness show degradation for UO 2 as a result of Xe-irradiation.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2026

Absorber Clamp for Microcalorimeter Decay Energy Spectrometry

Microcalorimeter Decay Energy Spectrometry (DES) is of interest to nuclear safeguards due to its ability to provide high precision isotopic compositions of nanogram-to microgram-scale samples of Pu and U and related daughter products. The DES method is able to record decay energy of each alpha-decay event in a sample that is embedded in a metal matrix (absorber) and thermally linked to a microcalorimeter detector. This work optimizes the DES technique used to thermally link the absorber and microcalorimeter detector element to allow for more rapid assembly and to increase detector performance and operating life. Optimized attachment methods are crucial for enhancing the viability of DES in high-sample-throughput facilities, such as those that support international nuclear safeguards measurements. Here, in this study, we designed and implemented a pressure-based absorber clamp and evaluated the performance of this new attachment method relative to pressed indium bond attachment. Results using the absorber clamp demonstrate a streamlined detector assembly procedure that minimizes accidental damage to detectors, as well as increasing detector pulse speeds by 57%. Spectral comparison shows the clamp preserves detector performance relative to indium attachment.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2025

New precious metal containing normal spinels: LiRhRu 1-x Ir x O 4 , LiFeIr 1-x Ru x O 4 , and LiCoIr 1-x Ru x O 4

Large spin-orbit-coupled cations in geometrically frustrated crystal structures have the most suitable setting for exploring novel exotic states of matter. Spinel oxides (AM 2 O 4 ) are well-known examples of geometrically frustrated systems. In this study, we report for the first time the synthesis of compositions LiRhRu 1-x Ir x O 4 (x = 0–0.5), LiFeIr 1-x Ru x O 4 (x = 0–0.5), and LiCoIr 1-x Ru x O 4 (x = 0–0.3) containing precious metal cations on edge-sharing octahedral M-sites, and systematically investigate their magnetic and electrical properties. 57 Fe Mössbauer spectroscopy revealed that iron is trivalent in all LiFeIr 1-x Ru x O 4 solid solutions. Magnetic measurements indicate deviations from theoretical spin-only magnetic moment values, indicating the influence of spin-orbit coupling owing to the presence of 4d and 5d block elements. The LiFeIr 1-x Ru x O 4 series shows spin-glass-like freezing behavior with T g ≈ 20 K, and a small frustration index (f ≈ 1-2), indicating that the frustration originates from site disorder. LiRhRu 1-x Ir x O 4 and LiCoIr 1-x Ru x O 4 exhibit strongly geometrically frustrated magnetism. Electrical resistivity measurements as a function of temperature indicate that all phases are semiconducting. Seebeck coefficient measurements show that LiRhRu 1-x Ir x O 4 and LiFeIr 1-x Ru x O 4 are p-type semiconductors with holes as the major charge carriers. A sign reversal of the Seebeck coefficient indicates both holes and electrons as carriers for LiCoIr 1-x RuxO 4 (x = 0–0.2), but only holes as major carriers for x = 0.3. Here, the Seebeck coefficient and power factor increase drastically in the LiRhRu 1-x Ir x O 4 solid solution with Ir substitution, reaching a maximum of ≈ +125 μV/K and ≈2.3×10 -6 W/mK 2 at ∼650 K for x = 0.5.

Charge carriers↗
DOE OSTI2024

Molecular shifts in dissolved organic matter along a burn severity continuum for common land cover types in the Pacific Northwest, USA

Increasing wildfire severity is of growing concern in the western United States, with consequences for the production, composition, and mobilization of dissolved organic matter (DOM) from terrestrial to aquatic systems. Our current understanding of wildfire impacted DOM (often termed pyrogenic DOM) composition is largely built from temperature-based studies that can be difficult to extrapolate to field conditions, which are often defined by ‘burn severity’, or the post-wildfire impact observed at a site. Thus, burn severity can encapsulate a broader range of fire and environmental conditions not exclusive to temperature. Biogeochemical studies that describe DOM along burn severity continuums remain limited but are needed to better link DOM composition with field conditions post-fire. Here, in this study, we addressed this need with an experimental open air burn simulation that generated chars from vegetation representative of major land cover types in the western United States. The chars were leached to simulate DOM mobilization potential. The DOM composition was characterized by ultra-high resolution mass spectrometry (HR-MS) and UV/VIS absorbance and fluorescence. Our results indicated that the shifts of DOM production and composition along a burn-severity gradient depends on the land cover type that was burned, with the degree of change dependent on the composition of the starting parent vegetation material. Fluorescence signatures indicated a strong convergence across land cover types to more aromatic DOM with increasing severity, while HR-MS indicated an increase in the production of aromatic nitrogen containing DOM with increasing severity. Results from this study enhance our ability to describe DOM composition in a framework that can be more directly related with field and remote-sensing based metrics.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Anisotropic growth of Ni 2 (Cr,Mo) ordered phase in proton irradiated Ni-Cr-Mo alloys

Ni-Cr-Mo alloys are widely used in the nuclear industry as structural materials due to their high temperature strength and corrosion resistance. Ni-based alloys containing around 33 at.% (Cr+Mo) developed a long-range ordered Ni 2 (Cr,Mo) phase after thermal aging and/or irradiation. The ordering mechanism for thermally-aged Ni 2 (Cr,Mo) phase is well-understood, characterized to be sluggish, homogeneous, and isotropic. The ordering mechanism for irradiation-induced Ni 2 (Cr,Mo) phase is not fully understood, characterized as having rapid formation and demonstrating anisotropic precipitation. Here, this work elucidates the anisotropic precipitation and anisotropic precipitation mechanism of Ni 2 (Cr,Mo) after proton irradiation in Ni-Cr-Mo alloys. Selected area electron diffraction and bright-field scanning transmission electron microscopy imaging are used to image superlattice reflections from the ordered phase and irradiation-induced defects, respectively. A higher degree of anisotropic precipitation is observed with increasing dislocation loop and void size; a phenomenon not observed in thermally aged samples.

36 - MATERIALS SCIENCE↗