Detection and location of rock falls using seismic and infrasound sensors
Not Available
SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Not Available
Not Available
Listeria monocytogenes is considered a major challenge for the food industry as it can persist for long periods in food processing plants by forming biofilms. The aims of this study were: i) to assess the biofilm producing ability of 57 Listeria monocytogenes isolates previously subjected to whole-genome sequencing (WGS); ii) to compare the levels of biofilm formation with the presence or absence of biofilm associated genes. To determine the presence or absence of a known set of biofilm associated genes, a comparative genomic analysis was performed on each strain. Among Listeria monocytogenes isolates, 58 %, 38.5 % and 3.5 % exhibited weak, moderate or strong biofilm production, respectively. No difference in biofilm production was observed between food and environmental isolates. The percentage of Listeria monocytogenes strains isolated from meat products (57 %) classified as moderate or strong biofilm producers was higher than the percentage obtained for strains isolated from dairy products (28 %). Here, the presence of the Stress Survival Islet 1, the arsD stress gene and the truncated inlA protein was significantly associated with increased levels of biofilm. Combining biofilm phenotype with molecular and genotyping data may provide the opportunity to better understand the relationship between genes linked to biofilm formation in Listeria monocytogenes.
Purpose: To evaluate the dose–response relationship between radiation-induced atelectasis after stereotactic body radiation therapy (SBRT) and bronchial dose. Methods and Materials: Seventy-four patients treated with SBRT for tumors close to main, lobar, or segmental bronchi were selected. The association between incidence of atelectasis and bronchial dose parameters (maximum point-dose and minimum dose to the high-dose bronchial volume [ranging from 0.1 cm{sup 3} up to 2.0 cm{sup 3}]) was statistically evaluated with survival analysis models. Results: Prescribed doses varied between 4 and 20 Gy per fraction in 2-5 fractions. Eighteen patients (24.3%) developed atelectasis considered to be radiation-induced. Statistical analysis showed a significant correlation between the incidence of radiation-induced atelectasis and minimum dose to the high-dose bronchial volumes, of which 0.1 cm{sup 3} (D{sub 0.1cm3}) was used for further analysis. The median value of D{sub 0.1cm3} (α/β = 3 Gy) was EQD{sub 2,LQ} = 147 Gy{sub 3} (range, 20-293 Gy{sub 3}). For patients who developed atelectasis the median value was EQD{sub 2,LQ} = 210 Gy{sub 3}, and for patients who did not develop atelectasis, EQD{sub 2,LQ} = 105 Gy{sub 3}. Median time from treatment to development of atelectasis was 8.0 months (range, 1.1-30.1 months). Conclusion: In this retrospective study a significant dose–response relationship between the incidence of atelectasis and the dose to the high-dose volume of the bronchi is shown.
This study aims to combine multiparametric magnetic resonance imaging (MRI) and digitized pathology with machine learning to generate predictive maps of histologic features for prostate cancer localization.
Not Available
Not Available
Aerial Gamma-Ray Surveys (GRS) are ideal for tracking anthropogenic gamma radiation releases and transport. The interpretation of a GRS can be complicated by natural gamma-ray sources such as atmospheric radon, cosmic rays, geologic materials, and even the survey equipment itself. Some of these complicating factors can be accounted for or corrected by calibration or mathematic techniques. Real-time algorithms that attempt to enhance potential radiogenic anomalies over background are also in use. However, natural geology is a source of significant background gamma-ray production and neither mathematical corrections nor real-time algorithmic approaches directly account for geology and geochemistry. Here in this study, we advance techniques to predict geologic background exposure rates using rapid and practical methods which can be achieved in the field. In addition we generate models that focus specifically on highlighting radiogenic anomalies for emergency response or further investigation. Predictive models developed in this study were generally able to predict background with medians of ± 1.0 μR/h compared to measured data, and were also able to highlight anomalous areas even where radiation exposure rates were within the range of natural background.
CuIn{sub 1-x}Fe{sub x}S{sub 2}(x=0-0.30) was synthesized via high-temperature, solid-state synthesis. Phase-pure materials were found in samples where x=0-0.15, after which a secondary phase became apparent. The materials were characterized with the use of X-ray powder diffraction (XRPD), and Reitveld refinement revealed a linear decrease in unit cell volume as the amount of iron substitution increases in accordance with Vegard's Law. Inductively coupled plasma (ICP) confirms that the actual stoichiometry is close to the nominal composition of the materials. The temperature for both the chalcopyrite-to-sphalerite and the sphalerite-to-wurtzite phase transitions decreases with increasing iron substitution for indium. These findings suggest that the Fe is being randomly incorporated into the crystal structure of the CuInS{sub 2}. X-ray photoelectron spectroscopy (XPS) measurements were used to determine the oxidation state of the ions (Cu{sup 1+}, In{sup 3+,} and S{sup 2-}), and Fe{sup 57} Moessbauer spectroscopy verified that the iron is in the 3{sup +} oxidation state. Band gaps of the solid solution were estimated to be in the range of 0.70-0.85 eV. Rietveld refinement of neutron diffraction data indicates that the iron is occupying the In site within the chalcopyrite structure. - Graphical abstract: CuIn{sub 1-x}Fe{sub x}S{sub 2} samples were prepared by solid-state synthesis. X-ray photoelectron spectroscopy and Moessbauer spectroscopy indicate Cu{sup +}, In{sup 3+}, Fe{sup 3+} and S{sup 2-} in the samples. Rietveld refinement of neutron powder diffraction data shows Fe{sup 3+} residing on the indium site. The band gaps of the iron-containing samples decrease to {approx}0.7 eV. Highlights: Black-Right-Pointing-Pointer X-ray photoelectron spectroscopy confirms the presence of Cu{sup +}, In{sup 3+} and S{sup 2-}. Black-Right-Pointing-Pointer Moessbauer spectroscopy indicates the presence of Fe{sup 3+}. Black-Right-Pointing-Pointer Rietveld refinement of neutron powder diffraction data shows iron on the indium site. Black-Right-Pointing-Pointer The band gap decreases to {approx}0.7 eV with only 5% iron substitution. Black-Right-Pointing-Pointer Additional characterization is reported.
Highlights: • Sb is on Ca2 sites (N center) in commercial phosphors, literature conflict ended. • N centers are covalently bonded SbO pairs have IR absorption band at 685 cm{sup −1}. • Incorporation of Na converts N to HE centers by removal of O on F sites. • Proportions of N and HE precisely controlled by Na/Sb molar ratio. • Luminescence of N and HE centers is very different, both are described in detail. - Abstract: The luminescence centers in antimony doped fluorapatite phosphors were characterized by optical emission spectroscopy, IR and FTIR absorption, and Raman scattering. The luminescence centers in commercial phosphors consist of covalently bound SbO pairs (N center). The vibrational spectrum of analogous BiO pairs was studied for the first time in FAP. New methods of preparation yielded material with a record high level of SbO doping. There is a second well established (HE) center which consists of Sb on Ca2 sites and Na at nearby Ca1 or Ca2 sites. The properties of the N and HE centers differ greatly and are described in detail. We showed for the first time that HE centers like N centers can efficiently sensitize the fluorescence of manganese in FAP.
Preserving the Mary Rose oak hull for future generations is a major challenge due to the highly heterogeneous nature of waterlogged wooden artifacts, which contain polycrystalline, amorphous, and nanostructured materials that test traditional characterization methods. Effective conservation requires detailed knowledge of the distribution and chemical nature of these species to develop strategies for preventing multiple chemo-mechanical degradation pathways. Here, we apply synchrotron-based computed tomography total scattering methods to the Mary Rose keelson wood that provides valuable position-resolved structural information on multiple embedded species of different length and concentration scales. We identify 5 nm zinc sulfide nanoparticles in the wood, presumably deposits from bacteria operating on the sulfur energy cycle under the anaerobic conditions on the seabed. These are identified as precursors to acid attack on the wood upon removal to an aerobic environment. These insights inform not only next-generation conservation strategies, but also the efficacy and unforeseen issues of previous treatments.
Not Available