Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “flow physics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,621 records · Page 90
All sourcesNASA NTRSDOE OSTI
DOE OSTI2017

Development of a Mechanistic Model for Predicting Sliding Vapor Bubble Growth

A new mechanistic model for predicting the growth of sliding vapor bubble in subcooled boiling flows has been developed. This model employs a physical base that the fundamental mechanisms applied to the bubble growth at a nucleation site can also be applied to the growth of sliding bubble. The heat transfer mechanisms considered are microlayer evaporation, evaporation of superheated liquid, and condensation. Modifications were made to the physical assumptions/reasoning applied to the existing growth models to reflect the intrinsic physics associated with the growth of sliding bubble. The present model has been successfully validated against a broad set of subcooled flow boiling data generated by three separate research groups using different working fluids and heater surfaces. The physical dependency of bubble growth during sliding on the relevant flow boiling parameters (i.e., mass flux, wall superheat, and subcooling level) observed in these experiments was well reproduced by the present model.

42 ENGINEERING↗
DOE OSTI2016

Application of Gauss's law space-charge limited emission model in iterative particle tracking method

The particle tracking method with a so-called gun iteration for modeling the space charge is discussed in the following paper. We suggest to apply the emission model based on the Gauss's law for the calculation of the space charge limited current density distribution using considered method. Based on the presented emission model we have developed a numerical algorithm for this calculations. This approach allows us to perform accurate and low time consumpting numerical simulations for different vacuum sources with the curved emitting surfaces and also in the presence of additional physical effects such as bipolar flows and backscattered electrons. The results of the simulations of the cylindrical diode and diode with elliptical emitter with the use of axysimmetric coordinates are presented. The high efficiency and accuracy of the suggested approach are confirmed by the obtained results and comparisons with the analytical solutions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
NASA NTRS1990

Natural laminar flow application to transport aircraft

A major goal of NASA during the last 15 years has been the development of laminar flow technology for aircraft drag reduction. Of equal importance is achieving a state of readiness that will allow the successful application of this technology by industry to large, long-range aircraft. Recent progress in achieving extensive laminar flow with limited suction on the Boeing 757 has raised the prospects from practical application of the hybrid laminar flow control (HLFC) concept to subsonic aircraft. Also, better understanding of phenomena affecting laminar flow stability and response to disturbances has encouraged consideration of natural laminar flow (NLF), obtained without suction or active mechanical means, for application to transport aircraft larger than previously thought feasible. These ideas have inspired the current NASA/ASEE project with goals as follows: explore the feasibility of extensive NLF for aircraft at high Reynolds number under realistic flight conditions; determine the potential applications of NLF technology and the conditions under which they may be achieved; and identify existing aircraft that could be adapted to carry out flight experiments to validate NLF technology application. To achieve these objectives, understanding of the physical limits to natural laminar flow and possible ways to extend these limits was sought. The primary factors involved are unit Reynolds number, Mach number, wing sweep, thickness, and lift coefficients as well as surface pressure gradients and curvature. Based on previous and ongoing studies using laminar boundary layer stability theory, the interplay of the above factors and the corresponding transition limits were postulated.

Gratzer, Louis B.↗
DOE OSTI2023

Flow friction in a wide rectangular duct with a beveled inlet: Informal Notes of Fundamental Fluid Physics Studies

Fundamental streamwise pressure distributions were measured at Idaho State University to address a primary objective of obtaining insight into the apparent evolution of air flow regimes at moderate Reynolds numbers in thin, wide rectangular ducts with converging inlets. Ducts of 3.030 and 4.077 mm spacings s (called three and four mm), having non-dimensional lengths of (L/s) ≈ 500.8 and 372.2 and widths (W/s) ≈ 114.6 and 83.2, respectively, were compared. Flow rates ranged from Reynolds numbers based on hydraulic diameter (Re Dh ) of about 980 to 10,000 and corresponding non-dimensional downstream pressure gradient parameters (-K p ) covered the range 0.038 to 0.0061, respectively.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2016

Characterizing dynamic hysteresis and fractal statistics of chaotic two-phase flow and application to fuel cells

In this study, we analyze the stability of two-phase flow regimes and their transitions using chaotic and fractal statistics, and we report new measurements of dynamic two-phase pressure drop hysteresis that is related to flow regime stability and channel water content. Two-phase flow dynamics are relevant to a variety of real-world systems, and quantifying transient two-phase flow phenomena is important for efficient design. We recorded two-phase (air and water) pressure drops and flow images in a microchannel under both steady and transient conditions. Using Lyapunov exponents and Hurst exponents to characterize the steady-state pressure fluctuations, we develop a new, measurable regime identification criteria based on the dynamic stability of the two-phase pressure signal. We also applied a new experimental technique by continuously cycling the air flow rate to study dynamic hysteresis in two-phase pressure drops, which is separate from steady-state hysteresis and can be used to understand two-phase flow development time scales. Using recorded images of the two-phase flow, we show that the capacitive dynamic hysteresis is related to channel water content and flow regime stability. The mixed-wettability microchannel and in-channel water introduction used in this study simulate a polymer electrolyte fuel cell cathode air flow channel.

42 ENGINEERING↗
NASA NTRS1980

A visual investigation of turbulence in stagnation flow about a circular cylinder

A diagnostic visualization study of turbulence in stagnation flow around a circular cylinder was carried out to gain physical insight into the coherent structure of turbulence in flow around a bluff body advanced by the vorticity-amplification theory. The visualization was conducted at a cylinder-diameter Reynolds number of 8000 utilizing titanium dioxide white smoke for an approaching flow containing turbulence at scales larger than the neutral wavelength of the stagnation flow. Analyses of the flow events focused on tracing out the temporal and spatial evolution of a cross-vortex tube outlined by the entrained smoke filaments from its emergence near the stagnation zone through its penetration into the cylinder boundary layer.

Sadeh, W. Z.↗
NASA NTRS1990

Isothermal gas-liquid flow at reduced gravity

Research on adiabatic gas-liquid flows under reduced gravity condition is presented together with experimental data obtained using a NASA-Lewis RC 100-ft drop tower and in a LeRC Learjet. It is found that flow patterns and characteristics remain unchanged after the first 1.5 s into microgravity conditions and that the calculated time for a continuity wave to traverse the test section is less than 1.2 s. It is also found that the dispersed bubbles move at the same velocity as that of the front of the slug and that the transition between bubbly and slug flow is insensitive to diameter. Both the bubbly and the slug flows are suggested to represent a continuum of the same physical process. The characteristics of annular, slug, and bubbly flows are compared.

Dukler, A. E.↗
DOE OSTI2022

Effect of PVD-coated chromium on the subcooled flow boiling performance of nuclear reactor cladding materials

Here we elucidate the separate effect of a thin Cr coating deposited by physical vapor deposition (PVD) on the subcooled flow boiling performance of zircaloy-4. First, we run flow boiling experiments on prototypical zircaloy-4 surfaces mimicking the scratch pattern and surface roughness of nuclear reactor claddings. Then, we PVD-coat a 0.3 µm thick chromium layer on the same exact surface and repeat the same flow boiling investigations. All experiments are run using deionized water at atmospheric pressure, flowing on a 1 × 3 cm 2 rectangular cross section channel at a rate of 1000 kg/m 2 /s and a subcooling of 10 K. We measure the average temperature of the boiling surface at increasing surface heat fluxes, covering a wide range of heat transfer regimes, from single-phase forced convection to the boiling crisis. We also record high-speed videos of the boiling process, which we postprocess to measure bubble nucleation site density, growth time, departure diameter and frequency. The surface analysis reveals that, while the chromium coating does not seem change the surface roughness and morphology, it improves surface wettability. However, it decreases the critical heat flux. The chromium coating causes an increase of nucleation temperature, bubble departure diameter and growth time, and a reduction of the nucleation site density. The concurrence of these observations indicates that a size reduction of the nucleation sites, conformally covered by the chromium coating, may be the cause of the boiling performance deterioration. We confirm this hypothesis repeating the same analysis on a FeCrAl sample prepared and tested using the same protocol as the zircaloy-4 sample, but with a different initial surface texture.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
NASA NTRS1992

Characterization of dynamic stall phenomenon using two-dimensional unsteady Navier-Stokes equations

Among the new significant aspects of the present work are: (1) the treatment of the far-field boundary; (2) the use of C-grid topology, with the branch-cut singularity treated analytically; (3) evaluation of the effect of the envelope of prevailing initial states, and finally; (4) the ability to employ streakline/pathline 'visualization' to probe the unsteady features prevailing in vortex-dominated flows. The far-field boundary is placed at infinity, using appropriate grid stretching. This contributes to the accuracy of the solutions, but raised a number of important issues which needed to be resolved; this includes determining the equivalent time-dependent circulation for the pitching airfoil. A secondary counter-clockwise vortex erupts from within the boundary layer and immediately pinches off the energetic leading-edge shear layer which then, through hydrodynamic instability, rolls up into the dynamic stall vortex. The streakline/pathline visualization serves to provide information for insight into the physics of the unsteady separated flow.

Ghia, K. N.↗
DOE OSTI2025

MHD Analysis of Dual-Coolant Lead-Lithium Blanket for Spherical Tokamak Advanced Reactor

The tritium breeding blanket is vital for future fusion power plants, with the Spherical Tokamak Advanced Reactor (STAR) project highlighting the dual-coolant lead-lithium (DCLL) design. The DCLL blanket performs shielding, energy exhaust, and tritium breeding using a lead-lithium alloy , with lithium as the breeder and lead as the neutron multiplier. It also serves as the primary coolant, with helium providing supplemental cooling. Reduced-activation ferritic/martensitic steel is used for the blanket structure. Magnetohydrodynamic (MHD) phenomena influence the liquid metal flow in a magnetic field, affecting heat transfer in the breeder affected by energetic neutrons. Understanding key flow parameters in such conditions is critical for efficient DCLL design. This study uses three-dimensional thermofluid MHD analysis with ANSYS CFX software, modified at Princeton Plasma Physics Laboratory, to simulate high Hartmann flows. The neutronics code MCNP, coupled with plasma equilibrium, provides heat source distribution. In conclusion, we examine electromagnetic interactions in adjacent fluid domains and analyze the magnetic field’s impact on flow distribution in the inboard and outboard blanket layout, using detailed mesh generation for accurate results.

DCLL↗
NASA NTRS1992

Reynolds stress calculations of homogeneous turbulent shear flow with bounded energy states

Reynolds stress calculations of homogeneous turbulent shear flow are conducted with a second-order closure model modified to account for non-equilibrium vortex stretching in the dissipation rate transport equation, as recently proposed by Bernard and Speziale. As with the earlier reported k-epsilon model calculations incorporating this vortex stretching effect, a production-equals-dissipation equilibrium is obtained with bounded turbulent kinetic energy and dissipation. However, this equilibrium is not achieved until the dimensionless time greater than 60, an elapsed time that is at least twice as large as any of those considered in previous numerical and physical experiments on homogeneous shear flow. Direct quantitative comparisons between the model predictions and the results of experiments are quite favorable. In particular, it is shown that the inclusion of this non-equilibrium vortex stretching effect has the capability of explaining the significant range of production to dissipation ratios observed in experiments.

Speziale, Charles G.↗
NASA NTRS1993

Reynolds stress calculations of homogeneous turbulent shear flow with bounded energy states

Reynolds stress calculations of homogeneous turbulent shear flow are conducted with a second-order closure model modified to account for nonequilibrium vortex stretching in the dissipation rate transport equation as recently proposed by Bernard and Speziale (1992). As with the earlier reported K-epsilon model calculations incorporating this vortex stretching effect, a production-equals-dissipation equilibrium is obtained with bounded turbulent kinetic energy and dissipation. However, this equilibrium is now not achieved until the dimensionless time St greater than 60 - an elapsed time that is at least twice as large as any of those considered in previous numerical and physical experiments on homogeneous shear flow. Direct quantitative comparisons between the model predictions and the results of experiments are quite favorable. In particular, it is shown that the inclusion of this nonequilibrium vortex stretching effect has the capability of explaining the significant range of production to dissipation ratios observed in experiments.

Speziale, Charles G.↗
NASA NTRS1994

Large Eddy Simulation of Homogeneous Rotating Turbulence

Study of turbulent flows in rotating reference frames has proven to be one of the more challenging areas of turbulence research. The large number of theoretical, experimental, and computational studies performed over the years have demonstrated that the effect of solid-body rotation on turbulent flows is subtle and remains exceedingly difficult to predict. Because of the complexities associated with non-homogeneous turbulence, it is worthwhile to examine the effect of steady system rotation on the evolution of an initially isotropic turbulent flow. The assumption of statistical homogeneity considerably simplifies analysis and computation; calculation of homogeneous turbulence is further motivated since it possesses the essential physics found in more complex rotating flows. The principal objectives of the present study have therefore been to increase our fundamental understanding of turbulent flows in rotating reference frames through an examination of the asymptotic state of homogeneous rotating turbulence; particularly as to the existence of an asymptotic state which is self similar. Knowledge of an asymptotic similarity state permits prediction of the ultimate statistical evolution of the flow without requiring detailed knowledge of the complex, and not well understood, non-linear transfer processes. Aside from examination of possible similarity states in rotating turbulence, of further interest in this study has been an examination of the degree to which solid-body rotation induces a two-dimensional state in an initially isotropic flow.

Squires, Kyle D.↗
NASA NTRS2001

Rheology of Diabase: Implications for Tectonics on Venus and Mars

Two important goals of our experimental investigation of the rheological behavior of diabase rocks were: (1) to determine flow laws describing their creep behavior over wide ranges of temperature, stress and strain rate and (2) to develop an understanding of the physical mechanisms by which these rocks flow under laboratory conditions. With this basis, a primary objective then was to construct constitutive equations that can be used to extrapolate from laboratory to planetary conditions. We specifically studied the rheological properties of both natural rock samples and synthetic aggregates. The former provided constraints for geologic systems, while the latter defined the relative contributions of the constituent mineral phases and avoided the influence of glass/melt found in natural samples. In addition, partially molten samples of crustal rock composition were deformed in shear to large strains (greater than 200%) important in crustal environments. The results of this research yielded essential rheological properties essential for models of crustal deformation on terrestrial planets, specifically Venus and Mars, as well as on the geodynamical evolution of these planets. Over the past three years, we also completed our investigation of the creep behavior of water ice with applications to the glaciers, ice sheets and icy satellites. Constitutive equations were determined that describe flow over a wide ranged of stress, strain rate, grain size and temperature. In the case of ice, three creep regimes were delineate. Extrapolation demonstrates that dislocation glide and grain boundary sliding processes dominate flow in ice I under planetary conditions and that diffusion creep is not an important deformation mechanism either in the laboratory or on icy satellites. These results have already been incorporated by other investigators into models describing, for example, the thickness and stability of the ice shell on Europa and to unravel long-standing discrepancies between field observations on glaciers and laboratory results.

Kohlstedt, David L.↗
DOE OSTI2018

Impedance Spectroscopy, Magnetic and Optical Analysis of Cadmium Tungstate Nanoparticles from Influence of Capping Agent Additives

Nano crystals of cadmium tungstate (CdWO{sub 4}) were obtained by facile precipitation route by using cadmium sulfate octahydrate and sodium tungstate dihydrate. These nanoparticles were then coated using different capping agents such as glucose, polyvinyl alcohol (PVA), and valine and their effects on the particle size, band gap, morphology, and magnetic character were investigated by powder X-ray diffraction, UV-Visible, FESEM, TEM, and VSM analysis. Capping agents are used in the synthesis of nanoparticles since they facilitate the growth and aggregation of particles in a precise manner, by usually acting as a physical barrier which controls the flow of free electron to the catalyst, so that they can be utilized by the catalyst and sensors of nanoparticle. Impedance spectroscopic technique was carried out, which was very useful in separating the grain boundary resistance and grain boundary capacitance contributions. We discuss the utilization of capping agents and their effects, including surface, optical and intergranular potential barriers in this work.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS1979

Topology of two-dimensional and three-dimensional separated flows

It is shown that topology rules can define a small number of singular points on an aerodynamic surface and in the flow which can be combined in various ways to create the structures and characterize the physical mechanisms of three-dimensional separated flows. This topological development is based on the hypothesis that vector fields of skin-friction lines and external streamlines remain continuous. Among examples treated are the lee-side separated flows about slender bodies at angle of attack with symmetric or asymmetric wake structures; about a protuberance normal to a wall; and over a rearward-facing axisymmetric step.

Tobak, M.↗
NASA NTRS1990

A turbulent two-phase flow model for nebula flows

A new and very efficient turbulent two-phase flow numericaly model is described to analyze the environment of a protoplanetary nebula at a stage prior to the formation of planets. Focus is on settling processes of dust particles in flattened gaseous nebulae. The model employs a perturbation technique to improve the accuracy of the numerical simulations of such flows where small variations of physical quantities occur over large distance ranges. The particles are allowed to be diffused by gas turbulence in addition to settling under gravity. Their diffusion coefficients is related to the gas turbulent viscosity by the non-dimensional Schmidt number. The gas turbulent viscosity is determined by the means of the eddy viscosity hypothesis that assumes the Reynolds stress tensor proportional to the mean strain rate tensor. Zero- and two-equation turbulence models are employed. Modeling assumptions are detailed and discussed. The numerical model is shown to reproduce an existing analytical solution for the settling process of particles in an inviscid nebula. Results of nebula flows are presented taking into account turbulence effects of nebula flows. Diffusion processes are found to control the settling of particles.

Champney, Joelle M.↗
DOE OSTI2021

A boundary value “reservoir problem” and boundary conditions for multi-moment multifluid simulations of sheaths

Multifluid simulations of plasma sheaths are increasingly used to model a wide variety of problems in plasma physics ranging from global magnetospheric flows around celestial bodies to plasma–wall interactions in thrusters and fusion devices. For multifluid problems, accurate boundary conditions to model an absorbing wall that resolves a classical sheath remain an open research area. This work justifies the use of vacuum boundary conditions for absorbing walls to show comparable accuracy between a multifluid sheath and lower moments of a continuum-kinetic sheath.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗