Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “flexible electronics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,621 records · Page 90

Improving resolution and resolvability of single-particle cryoEM structures using Gaussian mixture models

Cryogenic electron microscopy is widely used in structural biology, but its resolution is often limited by the dynamics of the macromolecule. Here, we developed a refinement protocol based on Gaussian mixture models that integrates particle orientation and conformation estimation, and improves the alignment for flexible domains of protein structures. We demonstrated this protocol on multiple datasets, resulting in improved resolution and resolvability, locally and globally, by visual and quantitative measures.

59 BASIC BIOLOGICAL SCIENCES↗

A novel integrated time-resolved array avalanche photodiode detection system for nuclear resonant scattering measurements

Here, the nuclear resonant scattering (NRS) experiment requires photon-counting detectors with high time resolution, short dead time, large dynamic range, low noise, and large detection area. An 8-channel avalanche photodiode (APD) array detector system with high integrity, flexibility, and reliability has been developed to adapt to the demands of NRS experiments. The detector system mainly consists of four key parts: (i) an array-APD sensor, (ii) 8-channel integrated fast preamplifiers, (iii) the time-to-digital converter readout electronics, and (iv) a data acquisition system and EPICS support software. Remarkably, the system exhibits a time resolution of better than 500 ps and has a sufficiently low noise level, allowing for the lowest detection energy threshold of 4 keV. The performance of the new array-APD system as well as its real application in nuclear forward scattering (NFS) and nuclear resonant inelastic x-ray scattering (NRIXS) experiments was tested in two synchrotron facilities. With the new system, the NFS signal very close to the prompt electronic scattering signal can be extracted. Thanks to the customized EPICS-areaDetector-based control software, NRIXS spectra can be readily measured with time and energy information of the NRIXS signal stored in the raw data, which is promising for developing NRIXS data analysis in the time domain. The array-APD detector can be deployed for nuclear resonant scattering experiments at various synchrotron radiation facilities.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Nano-engineering of electron correlation in oxide superlattices

Oxide heterostructures and superlattices (SLs) have attracted a great deal of attention in recent years owing to the rich exotic properties encountered at their interfaces. We focus on the potential of tunable correlated oxides by investigating the spectral function of the prototypical correlated metal SrVO3 , using soft x-ray absorption spectroscopy and resonant inelastic soft x-ray scattering to access both unoccupied and occupied electronic states, respectively. We demonstrate a remarkable level of tunability in the spectral function of SrVO 3 by varying its thickness within the SrVO 3 /SrTiO 3 SL, showing that the effects of electron correlation can be tuned from dominating the energy spectrum in a strongly correlated Mott–Hubbard insulator, towards a correlated metal. We show that the effects of dimensionality on the correlated properties of SrVO 3 are augmented by interlayer coupling, yielding a highly flexible correlated oxide that may be readily married with other oxide systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

TH-C-17A-07: Visualizing and Quantifying Radiation Therapy in Real-Time Using a Novel Beam Imaging Technique

Purpose: Radiation therapy uses invisible high energy X-rays to treat an invisible tumor. Proper positioning of the treatment beam relative to the patient's anatomy during dose delivery is critically important to the success of treatment. We develop and characterize a novel radiation therapy beam visualization technique for real-time monitoring of patient treatment. Methods: Custom made flexible scintillator sheets were fabricated from gadolinium oxysulfide (GOS) particles that had been doped with terbium within a silicone elastomer matrix. Sheets of several thicknesses ranging from 0.3 to 1mm were prepared and tested. Sheets were exposed to megavoltage X-ray and electron beams from a Varian linac and the resulting optical signal was collected by multiple CMOS cameras placed in the treatment room. Real-time images were collected for different beam energies and dose rates. Signal intensity and SNR were calculated by processing the acquired images. Results: All signals were detectable in the presence of full room lighting and at an integration time of 45ms. Average signal intensity and SNR increased with both sheet thickness and dose rate and decreased with beam energy and incident light. For a given sheet thickness and beam energy the correlation between dose rate and signal intensity was highly linear. Increased sheet thickness or dose rate results in a linear increase in the detected signal. All results are consistent with analytical approximations. Conclusion: The technique offers a means of accurately visualizing a radiation therapy beam shape and fluence in real time. The effects of salient parameters have been characterized and will enable further optimization of the technique as it is implemented into the clinical workflow. The project described was supported by the National Center for Advancing Translational Sciences of the National Institutes of Health through UL1 TR001085.

60 APPLIED LIFE SCIENCES↗

Resource Discovery for Extreme Scale Collaboration (RDESC) Final Report - RPI/TWC - Year 3

The amount of data produced in the practice of science is growing rapidly. Despite the accumulation and demand for scientific data, relatively little is actually made available for the broader scientific community. We surmise that the root of the problem is the perceived difficulty to electronically publish scientific data and associated metadata in a way that makes it discoverable. We propose to exploit Semantic Web technologies and practices to make (meta)data discoverable and easy to publish. We share our experiences in curating metadata to illustrate both the flexibility of our approach and the pain of discovering data in the current research environment. We also make recommendations by concrete example of how data publishers can provide their (meta)data by adding some limited, additional markup to HTML pages on the Web. With little additional effort from data publishers, the difficulty of data discovery/access/sharing can be greatly reduced and the impact of research data greatly enhanced.

96 KNOWLEDGE MANAGEMENT AND PRESERVATION↗

A Grand Scan of the pMSSM Parameter Space for Snowmass 2021

We present a flexible framework for interpretation of SUSY sensitivity studies for future colliders in terms of the phenomenological minimal supersymmetric standard model (pMSSM). We perform a grand scan of the pMSSM 19-dimensional parameter space that covers the accessible ranges of many collider scenarios, including electron, muon, and hadron colliders at a variety of center of mass energies. This enables comparisons of sensitivity and complementarity across different future experiments, including both colliders and precision measurements in the Cosmological and Rare Frontiers. The details of the scan framework are discussed, and the impact of future precision measurements on Higgs couplings, the anomalous muon magnetic moment, and dark matter quantities is presented. The next steps for this ongoing effort include performing studies with simulated events in order to quantitatively assess the sensitivity of selected future colliders in the context of the pMSSM.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

In-Flight Thermal Performance of the OCO-2 Instrument

The Orbiting Carbon Observatory-2 (OCO-2), launched on July 2, 2014, continues to operate nominally after successfully completing its primary mission of two years in space. It is hoped that, following a Senior Review and proposal phase, NASA will fund a two year extended mission, which would start in June 2017. The thermal design provides three temperature zones required by the instrument, specifically at 120 K, 267 K and 297 K. A single-stage pulse tube cryocooler provides refrigeration to three focal plane arrays to 120 K, via a high conductance flexible thermal strap. A variable conductance heat pipe (VCHP) based heat rejection system transports waste heat from the instrument, located inside the spacecraft, to the space-viewing radiators, providing tight temperature control of the spectrometer optics to 267 K, and maintains the electronics and cryocooler at 297 K. Soon after entering the A-Train on August 3, 2014, the optics and focal planes were cooled to their operating temperatures. Ice contamination of the cryogenic surfaces led to increased cryocooler loads and drove the need for two focal plane decontamination cycles between September 2014 and October 2014. A decrease in the radiometric gain of the O2 A-Band channel led to five additional focal plane decontamination cycles, between January 2015 and February 2017, and is now the primary driver of decontamination cycles. This paper provides a general overview of the thermal and cryogenic system design and reviews the inflight thermal performance for the mission.

Na-Nakornpanom, Arthur↗

Commercial and Cost Effective Production of Gas Electron Multiplier (GEM) Foils

The nuclear and high energy physics research community is constantly searching for new and improved tracking and radiation detectors. The introduction of micropattern detectors has opened new opportunities for improving the rate capabilities, as well as the spatial and time resolution of particle detectors in these applications. GEM detectors in particular have received enormous interest for use in detectors planned for a number of new and upgraded experiments at many different research facilities. These include both the STAR and PHENIX experiments at the Relativistic Heavy Ion Collider at Brookhaven National Laboratory, experiments at the Thomas Jefferson National Laboratory, Oak Ridge National Laboratory, and at the future electron-positron Linear Collider. At the present time, CERN is not able to supply foils in sufficient quantities to accommodate the needs of these experiments. Compounding this problem, there is a strong interest in GEM foils for numerous other applications, such as in astrophysics, medical imaging and detectors for homeland security. It would therefore be of significant benefit to the research community to develop a commercial source of GEM foils for all of these applications. Tech-Etch is in a unique position to develop this technology for commercial use. Tech-Etch has not only experience in numerous related high precision etched Kapton® products, but it also has strong ties with several research institutions (namely Brookhaven, Yale and MIT) that can help develop and evaluate the performance of the GEM foils produced at Tech-Etch. Additionally, since Tech-Etch is a small company, it also has the capability to produce a large variety of part configurations, as well as the flexibility to shift production methods, equipment, and chemistry to optimize the GEM foil manufacturing process without being constrained by existing work running on high volume continuous coil equipment.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Fast reciprocating probe system on the EAST superconducting tokamak

A new fast reciprocating probe system (FRPS) has been built and installed on the outer midplane of the EAST tokamak to investigate the profiles of the boundary plasma parameters such as electron density and temperature. The system consists of a two-stage motion drive mechanism: slow motion and fast motion. The fast motion is powered by a servo motor, which drives the probe horizontally up to 50 cm to scan the edge region of the EAST tokamak. The maximum velocity achieved is 2 m/s. High velocity and flexible control of the fast motion are the remarkable features of this FRPS. A specially designed connector installed at the front end of the probe shaft makes it easy to install or replace the probe head on FRPS. During the latest experimental campaign in the spring of 2010, a probe head with seven tips, including two tips for a Mach probe, has been used. An example is given for simultaneous profile measurements of the plasma temperature, plasma density, and the plasma flow velocity.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Guest Editorial Special Section on Advanced Medium-Voltage Power Electronics for Grid Interactive Applications

Medium-voltage power electronics (MVPE) plays essential roles in power grid modernization and links the MV distribution grid with low-voltage consumers and prosumers. Various MVPE devices, such as solid-state transformers or circuit breakers, inverter-based resources, power flow controllers, etc., bring the benefits of voltage conversion and power regulation in small footprint, power quality and efficiency improvements, and enhancements of grid controllability, flexibility, stability, and resilience. The MVPE also makes it possible for sustainable energy systems, such as solar/wind farms and energy storage generating facilities, to directly access to MV grids without multistage conversions. With their intrinsic intelligence and communications, MVPE enables many new smart grid functions and applications, e.g., dc interconnections and electric vehicle charging, which were not envisioned by traditional power grids otherwise. In addition, the integration of physical power processing units with cyber components forms a cyber-physical system, which is essential for long-term sustainability, development, and environmental preservation. Nonetheless, technical challenges on MVPE device reliability, scalable and efficient converter topologies, control stability, large-scale modeling and simulation, to name a few, need to be addressed and advanced to the next level. In conclusion, this Special Section on Advanced MV Power Electronics for Grid Interactive Applications in IEEE Transactions on Power Electronics (TPEL) provides an insight on some of the recent advances in MVPE and emerging challenges and potential solutions.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Programmable intrusion detection for distributed energy resources in cyber–physical networked microgrids

We present a programmable intrusion detection method is presented to identify the malicious attacks to distributed energy resources (DERs) in the cyber-physical networked microgrids. The proposed method injects small programmable signals into the system and uses the response to identify abnormal conditions. Because of the low or even zero inertia induced by integrations of DER power-electronic-interfaces, microgrids have very limited resilience capability; and thus, being sensitive to attacks. One microgrid's malfunction caused by attacks can easily propagate to its neighboring systems when several microgrids are connected, leading to catastrophic electricity supply failures. Through the presented method, malicious intrusions can be effectively detected, located, and defended for securing microgrids. Theoretical derivations are provided to define the programmable detection rules. The detection rule is easy and flexible to update, making it difficult for attack actors to gain the knowledge of the detection rules, in order to avoid being detected. Numerical results on a cyber-physical networked microgrids system show that the proposed method is effective and efficient in precisely locating intrusion attacks to the microgrids system.

42 ENGINEERING↗

Microstructure characteristics of LPBF&HIP fabricated graded composite transition joint between ferritic steel and austenitic stainless steel

Graded composite transition joints (GCTJs) offer a promising alternative to conventional dissimilar metal welds (DMWs) by enabling smooth compositional and microstructural transitions. However, GCTJs fabricated solely through additive manufacturing (AM) face challenges such as heat accumulation, complex parameter control, and elemental segregation. In this study, we propose a novel approach that relies on AM to design a spatially graded structure in one alloy and then employs hot isostatic pressing (HIP) as a diffusion bonding method to join it with a second alloy. Here, this method combines the flexibility of AM with the powder net-shaping advantage of HIP. Specifically, a series of closely packed austenitic stainless steel 304 conical structures were printed using laser powder bed fusion (LPBF) and then combined with ferritic steel P91 powder via HIP. By using electron backscatter diffraction (EBSD), electron probe microanalysis (EPMA), and transmission electron microscopy (TEM) techniques, the microstructure characteristics of the GCTJ of 304&P91, especially the interdiffusion zone (IDZ), have been systematically investigated. The microstructure at the interface transitions from austenite-ferrite (A+F) to austenite-martensite-ferrite (A+M+F), and finally to martensite-ferrite (M+F) due to diffusion. Additionally, the diffusion width between 304 and P91 increases with the volume fraction of P91. This unique design also ensures a gradual transition in both hardness and thermal expansion coefficient from 304 to P91, thereby enabling a smooth gradient in functional properties. Overall, this study proposes a novel approach for fabricating GCTJs and contributes to advancing design concepts in the field of dissimilar metal joining.

Additively manufacturing (AM)↗

Solvation Properties of Silver and Copper Ions in a Room Temperature Ionic Liquid: A First-Principles Study

Understanding the behavior of metal ions in room temperature ionic liquids (ILs) is essential for predicting and optimizing performance for technologies like metal electrodeposition; however, many mechanistic details remain enigmatic, including the solvation properties of the ions in ILs and how they are governed by the intrinsic interaction between the ions and the liquid species. Here, we utilize first-principles molecular dynamics simulations to unravel and compare the key structural properties of Ag + and Cu + ions in a common room temperature IL, 1-ethyl-3-methylimidazolium trifluoromethanesulfonate. We find that, when compared to Cu + , the larger Ag + shows a more disordered and flexible solvation structure with a more frequent exchange of the IL species between its solvation shells. In addition, our simulations reveal an interesting analog in the solvation behavior of the ions in the IL and aqueous environments, particularly in the effect of the ion electronic structures on their solvation properties. As a result, this work provides fundamental understanding of the intrinsic properties of the metal ions in the IL, while offering mechanistic understanding and strategy for future selection of ILs for metal electrodeposition processes.

36 MATERIALS SCIENCE↗

Asymmetric charge separation and recombination in symmetrically functionalized σ–π hybrid oligosilanes

The flexibility of σ-conjugated silanes presents new opportunities for manipulating charge generation, transport, and non-linear optical properties of materials. Recently we synthesized a series of acceptor–donor–acceptor (ADA) compounds in which a methylated oligosilane core (D) is flanked by electron-deficient cyanovinyl-substituted arenes (A). Based on a detailed characterization of the photophysics of ADA and donor–acceptor (DA) architectures using both steady state and ultrafast spectroscopic measurements we illustrate that asymmetric charge separation occurs directly following light absorption. Lippert analysis of solvatochromic emission indicates large changes in dipole moments on excitation consistent with the formation of dipolar emissive states. Time resolved absorption measurements reveal common excited-state relaxation behavior across molecular structures: spectral dynamics associated with the relaxation of nascent excited states occur on a common timescale for all structures within the same solvent environment, whereas charge recombination via excited-state decay consistently follows a common energy gap law. Ultrafast time-resolved Raman measurements reveal that reduction of the cyanovinyl moieties is instantaneous with excitation, with only minor shifts in vibrational features over the course of excited-state relaxation. We conclude that excited-state symmetry breaking that gives rise to asymmetric intramolecular charge transfer (ICT) is associated with the conformation of the central Si chain. In contrast, ultrafast solvent reorganization or solvent-controlled intramolecular dynamics only serve to stabilize nascent dipolar excited states, rather than induce charge separation from an initial quadrupolar state.

Zhou, Jiawang↗

Theoretical prediction of low-density hexagonal ZnO hollow structures

Along with wurtzite and zinc blende, zinc oxide (ZnO) has been found in a large number of polymorphs with substantially different properties and, hence, applications. Therefore, predicting and synthesizing new classes of ZnO polymorphs are of great significance and have been gaining considerable interest. Herein, we perform a density functional theory based tight-binding study, predicting several new series of ZnO hollow structures using the bottom-up approach. The geometry of the building blocks allows for obtaining a variety of hexagonal, low-density nanoporous, and flexible ZnO hollow structures. Their stability is discussed by means of the free energy computed within the lattice-dynamics approach. Our calculations also indicate that all the reported hollow structures are wide band gap semiconductors in the same fashion with bulk ZnO. The electronic band structures of the ZnO hollow structures are finally examined in detail.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Overview of physics studies on ASDEX Upgrade

The ASDEX Upgrade (AUG) programme, jointly run with the EUROfusion MST1 task force, continues to significantly enhance the physics base of ITER and DEMO. Here, the full tungsten wall is a key asset for extrapolating to future devices. The high overall heating power, flexible heating mix and comprehensive diagnostic set allows studies ranging from mimicking the scrape-off-layer and divertor conditions of ITER and DEMO at high density to fully non-inductive operation ( q 95 = 5.5, β N ≤ 2.8) at low density. Higher installed electron cyclotron resonance heating power ≤ 6 MW, new diagnostics and improved analysis techniques have further enhanced the capabilities of AUG.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Rise and fall of Mott insulating gaps in YNiO 3 paramagnets as a reflection of symmetry breaking and remaking

The YNiO 3 nickelate is a paradigm d-electron oxide that manifests the intriguing temperature-mediated sequence of three phases transitions from (i) magnetically ordered insulator to (ii) paramagnetic (PM) insulator and then to (iii) PM metal. Such phenomena raised the question of the nature of the association of magnetism and structural symmetry breaking with the appearance in (i) and (ii) and disappearance in (iii) of insulating band gaps. It is demonstrated here that first-principles mean-field–like density-functional theory (DFT), driven by molecular dynamics temperature evolution, can describe not only the origin of the magnetically long-range ordered insulating phase (i), but also the creation of an insulating paramagnet (ii) that lacks spin- long-range order, and of a metallic paramagnet (iii) as temperature rises. This approach provides the patterns of structural and magnetic symmetry breaking at different temperatures, in parallel with band gaps obtained when the evolving geometries are used as input to DFT electronic band-structure calculations. This disentangles the complex interplay among spin, charge, and orbital degrees of freedom. Analysis shows that the success in describing the rise and fall of the insulating band gaps along the phase transition sequence is enabled by allowing sufficient flexibility in describing diverse local structural and magnetic motifs as input to DFT. This entails the use of sufficiently large supercells that allow expressing structural disproportionation of octahedra, as well as a description of PM phases as a distribution of local magnetic moments (rather than using a single averaged moment). It appears that the historic dismissal of mean-field–like DFT as being unable to describe such Mott-like transitions was premature, as it was based on consideration of averaged crystallographic unit cells, a description that washes out local symmetry-breaking motifs. The magnetically ordered insulating YNiO 3 phase (i) and the PM insulating phase (ii) result in DFT from allowing symmetry breaking, evident already by considering the athermal internal energy. In contrast, the PM metallic phase (iii) is formed thermally by smearing out thus weakening symmetry breaking. Analysis of snapshots of the different forms of structural vs magnetic symmetry breaking shows that only the loss of the polymorphous distribution of magnetic moments existing in (ii) causes the fall of the band gap, resulting in the metallic state in (iii). Finally, the interesting conclusion is that such a description of the rise [in phases (i) and (ii)] and fall [in phase (iii)] of the insulating gap does not rely on the traditional Mott-like strong correlation understanding, but on breaking and remaking of magnetic and structural symmetries reflected in energy lowering.

36 MATERIALS SCIENCE↗